scholarly journals Graphene for the Building of Electroanalytical Enzyme-Based Biosensors. Application to the Inhibitory Detection of Emerging Pollutants

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2094 ◽  
Author(s):  
Marta Bonet-San-Emeterio ◽  
Noelia Felipe Montiel ◽  
Manel del Valle
Keyword(s):  
Graphene Oxide ◽  
Benzoic Acid ◽  
Low Cost ◽  
Reduced Graphene ◽  
Maximum Inhibition ◽  
Wide Range ◽  
Carboxylic Groups ◽  
Enzymatic Biosensor ◽  
Laccase Enzyme

Graphene and its derivates offer a wide range of possibilities in the electroanalysis field, mainly owing to their biocompatibility, low-cost, and easy tuning. This work reports the development of an enzymatic biosensor using reduced graphene oxide (RGO) as a key nanomaterial for the detection of contaminants of emerging concern (CECs). RGO was obtained from the electrochemical reduction of graphene oxide (GO), an intermediate previously synthesized in the laboratory by a wet chemistry top-down approach. The extensive characterization of this material was carried out to evaluate its proper inclusion in the biosensor arrangement. The results demonstrated the presence of GO or RGO and their correct integration on the sensor surface. The detection of CECs was carried out by modifying the graphene platform with a laccase enzyme, turning the sensor into a more selective and sensitive device. Laccase was linked covalently to RGO using the remaining carboxylic groups of the reduction step and the carbodiimide reaction. After the calibration and characterization of the biosensor versus catechol, a standard laccase substrate, EDTA and benzoic acid were detected satisfactorily as inhibiting agents of the enzyme catalysis obtaining inhibition constants for EDTA and benzoic acid of 25 and 17 mmol·L−1, respectively, and a maximum inhibition percentage of the 25% for the EDTA and 60% for the benzoic acid.

scholarly journals Photocatalytic reduction of graphene oxide with cuprous oxide film under UV-vis irradiation

2020 ◽  
Vol 59 (1) ◽  
pp. 207-214 ◽  
Author(s):  
Yao Wang ◽  
Jianqing Feng ◽  
Lihua Jin ◽  
Chengshan Li
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
Photocatalytic Reduction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Reduced Graphene ◽  
Reduction Efficiency ◽  
Metal Organic ◽  
Reduction Effect

AbstractWe have grown Cu2O films by different routes including self-oxidation and metal-organic deposition (MOD). The reduction efficiency of Cu2O films on graphene oxide (GO) synthesized by modified Hummer’s method has been studied. Surface morphology and chemical state of as-prepared Cu2O film and GO sheets reduced at different conditions have also been investigated using atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). Results show that self-oxidation Cu2O film is more effective on phtocatalytic reduction of GO than MOD-Cu2O film. Moreover, reduction effect of self-oxidation Cu2O film to GO is comparable to that of environmental-friendly reducing agent of vitamin C. The present results offer a potentially eco-friendly and low-cost approach for the manufacture of reduced graphene oxide (RGO) by photocatalytic reduction.

Synthesis and characterization of reduced graphene oxide by cobalt oxide composite electrode

2020 ◽  
Author(s):  
S. Veeresh ◽  
H. Ganesh ◽  
Y. S. Nagaraj ◽  
M. Vandana ◽  
S. P. Ashokkumar ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Cobalt Oxide ◽  
Composite Electrode ◽  
Synthesis And Characterization ◽  
Oxide Composite ◽  
Reduced Graphene

Metal-organic framework derived metal oxide/reduced graphene oxide nanocomposite, a new tool for the determination of dipyridamole

2021 ◽  
Author(s):  
Naeime Salandari-Jolge ◽  
Ali A. Ensafi ◽  
Behzad Rezaei
Keyword(s):  
Myocardial Infarction ◽  
Graphene Oxide ◽  
High Performance ◽  
High Selectivity ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Heart Patients ◽  
Reduced Graphene ◽  
Metal Organic

Dipyridamole is a prescribed medication used to treat cardiovascular diseases, angina pectoris, imaging tests for heart patients, and myocardial infarction. Therefore, high selectivity and sensitivity, low cost, and high-performance speed...

scholarly journals A Facile and Green Synthesis of a MoO2-Reduced Graphene Oxide Aerogel for Energy Storage Devices

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 594 ◽  
Author(s):  
Mara Serrapede ◽  
Marco Fontana ◽  
Arnaud Gigot ◽  
Marco Armandi ◽  
Glenda Biasotto ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Chemical Reduction ◽  
Low Cost ◽  
Xps Analysis ◽  
3D Scaffold ◽  
Energy Storage Devices ◽  
Reduced Graphene

A simple, low cost, and “green” method of hydrothermal synthesis, based on the addition of l-ascorbic acid (l-AA) as a reducing agent, is presented in order to obtain reduced graphene oxide (rGO) and hybrid rGO-MoO2 aerogels for the fabrication of supercapacitors. The resulting high degree of chemical reduction of graphene oxide (GO), confirmed by X-Ray Photoelectron Spectroscopy (XPS) analysis, is shown to produce a better electrical double layer (EDL) capacitance, as shown by cyclic voltammetric (CV) measurements. Moreover, a good reduction yield of the carbonaceous 3D-scaffold seems to be achievable even when the precursor of molybdenum oxide is added to the pristine slurry in order to get the hybrid rGO-MoO2 compound. The pseudocapacitance contribution from the resulting embedded MoO2 microstructures, was then studied by means of CV and electrochemical impedance spectroscopy (EIS). The oxidation state of the molybdenum in the MoO2 particles embedded in the rGO aerogel was deeply studied by means of XPS analysis and valuable information on the electrochemical behavior, according to the involved redox reactions, was obtained. Finally, the increased stability of the aerogels prepared with l-AA, after charge-discharge cycling, was demonstrated and confirmed by means of Field Emission Scanning Electron Microscopy (FESEM) characterization.

scholarly journals Raman Spectroscopy Investigation of Graphene Oxide Reduction by Laser Scribing

2021 ◽  
Vol 7 (2) ◽  
pp. 48
Author(s):  
Vittorio Scardaci ◽  
Giuseppe Compagnini
Keyword(s):  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
Reduce Graphene Oxide ◽  
Oxide Reduction ◽  
Material Parameters ◽  
Laser Scribing ◽  
Wide Range ◽  
Scan Speed ◽  
Laser Reduction

Laser scribing has been proposed as a fast and easy tool to reduce graphene oxide (GO) for a wide range of applications. Here, we investigate laser reduction of GO under a range of processing and material parameters, such as laser scan speed, number of laser passes, and material coverage. We use Raman spectroscopy for the characterization of the obtained materials. We demonstrate that laser scan speed is the most influential parameter, as a slower scan speed yields poor GO reduction. The number of laser passes is influential where the material coverage is higher, producing a significant improvement of GO reduction on a second pass. Material coverage is the least influential parameter, as it affects GO reduction only under restricted conditions.

Sign in / Sign up

Export Citation Format

Share Document