scholarly journals Synthesis of a Novel Series of Cu(I) Complexes Bearing Alkylated 1,3,5-Triaza-7-phosphaadamantane as Homogeneous and Carbon-Supported Catalysts for the Synthesis of 1- and 2-Substituted-1,2,3-triazoles

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2702
Author(s):  
Ivy L. Librando ◽  
Abdallah G. Mahmoud ◽  
Sónia A. C. Carabineiro ◽  
M. Fátima C. Guedes da Silva ◽  
Carlos F. G. C. Geraldes ◽  
...  
Keyword(s):  
Aqueous Medium ◽  
Sodium Azide ◽  
Supported Catalysts ◽  
Cycloaddition Reaction ◽  
Water Soluble ◽  
Terminal Alkynes ◽  
One Pot ◽  
Catalytic Systems ◽  
Immobilized Catalyst ◽  
High Yields

The N-alkylation of 1,3,5-triaza-7-phosphaadamantane (PTA) with ortho-, meta- and para-substituted nitrobenzyl bromide under mild conditions afforded three hydrophilic PTA ammonium salts, which were used to obtain a new set of seven water-soluble copper(I) complexes. The new compounds were fully characterized and their catalytic activity was investigated for the low power microwave assisted one-pot azide–alkyne cycloaddition reaction in homogeneous aqueous medium to obtain disubstituted 1,2,3-triazoles. The most active catalysts were immobilized on activated carbon (AC), multi-walled carbon nanotubes (CNT), as well as surface functionalized AC and CNT, with the most efficient support being the CNT treated with nitric acid and NaOH. In the presence of the immobilized catalyst, several 1,4-disubstituted-1,2,3-triazoles were obtained from the reaction of terminal alkynes, organic halides and sodium azide in moderate yields up to 80%. Furthermore, the catalyzed reaction of terminal alkynes, formaldehyde and sodium azide afforded 2-hydroxymethyl-2H-1,2,3-triazoles in high yields up to 99%. The immobilized catalyst can be recovered and recycled through simple workup steps and reused up to five consecutive cycles without a marked loss in activity. The described catalytic systems proceed with a broad substrate scope, under microwave irradiation in aqueous medium and according to “click rules”.

scholarly journals Water-Soluble O-, S- and Se-Functionalized Cyclic Acetyl-triaza-phosphines. Synthesis, Characterization and Application in Catalytic Azide-alkyne Cycloaddition

Molecules ◽  
2020 ◽  
Vol 25 (22) ◽  
pp. 5479
Author(s):  
Abdallah Mahmoud ◽  
Piotr Smoleński ◽  
M. Guedes da Silva ◽  
Armando Pombeiro
Keyword(s):  
Cycloaddition Reaction ◽  
Structural Features ◽  
Water Soluble ◽  
31P Nmr Spectroscopy ◽  
The Novel ◽  
X Ray Diffraction ◽  
One Pot ◽  
Hirshfeld Surfaces ◽  
The One ◽  
High Yields

The 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA) derivatives, viz. the already reported 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane 5-oxide (DAPTA=O, 1), the novel 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane-5-sulfide (DAPTA=S, 2), and 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane-5-selenide (DAPTA=Se, 3), have been synthesized under mild conditions. They are soluble in water and most common organic solvents and have been characterized using 1H and 31P NMR spectroscopy and, for 2 and 3, also by single crystal X-ray diffraction. The effect of O, S, or Se at the phosphorus atom on the structural features of the compounds has been investigated, also through the analyses of Hirshfeld surfaces. The presence of 1–3 enhances the activity of copper for the catalytic azide-alkyne cycloaddition reaction in an aqueous medium. The combination of cheaply available copper (II) acetate and compound 1 has been used as a catalyst for the one-pot and 1,4-regioselective procedure to obtain 1,2,3-triazoles with high yields and according to ‘click rules’.

scholarly journals Green ultrasound-assisted three-component click synthesis of novel 1H-1,2,3-triazole carrying benzothiazoles and fluorinated-1,2,4-triazole conjugates and their antimicrobial evaluation

2017 ◽  
Vol 67 (3) ◽  
pp. 309-324 ◽  
Author(s):  
Nadjet Rezki ◽  
Mohamed Reda Aouad
Keyword(s):  
Antimicrobial Activity ◽  
Cycloaddition Reaction ◽  
Dipolar Cycloaddition ◽  
Terminal Alkynes ◽  
One Pot ◽  
Alkyl Aryl ◽  
Antimicrobial Evaluation ◽  
Ultrasound Assisted ◽  
Click Synthesis

AbstractThe present study describes an efficient and ecofriendly, ultrasound, one-pot click cycloaddition approach for the construction of a novel series of 1,4-disubstituted-1,2,3-triazoles tethered with fluorinated 1,2,4-triazole-benzothiazole molecular conjugates. It involved three-component condensation of the appropriate bromoacetamide benzothiazole, sodium azide and 4-alkyl/aryl-5-(2-fluorophenyl)-3-(prop-2-ynylthio)-1,2,4-triazoles4a-ethrough a Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction. This approach involvesin situgeneration of azidoacetamide benzothiazole, followed by condensation with terminal alkynes in the presence of CuSO4/Na-ascorbate in aqueous DMSO under both conventional and ultrasound conditions. Some of the designed 1,2,3-triazole conjugates6a-owere recognized for their antimicrobial activity against some bacterial and fungal pathogenic strains.

scholarly journals Green Pathway in Utilizing CO2 via Cycloaddition Reaction with Epoxide—A Mini Review

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 548 ◽  
Author(s):  
Kunlanan Kiatkittipong ◽  
Muhammad Amirul Amin Mohamad Shukri ◽  
Worapon Kiatkittipong ◽  
Jun Wei Lim ◽  
Pau Loke Show ◽  
...  
Keyword(s):  
Supported Catalysts ◽  
Metal Organic Framework ◽  
Sustainable Use ◽  
Cycloaddition Reaction ◽  
Cyclic Carbonate ◽  
Organic Salt ◽  
Catalytic Systems ◽  
Carbonate Production ◽  
Use Of Resources ◽  
Salen Complexes

Carbon dioxide (CO2) has been anticipated as an ideal carbon building block for organic synthesis due to the noble properties of CO2, which are abundant renewable carbon feedstock, non-toxic nature, and contributing to a more sustainable use of resources. Several green and proficient routes have been established for chemical CO2 fixation. Among the prominent routes, this review epitomizes the reactions involving cycloaddition of epoxides with CO2 in producing cyclic carbonate. Cyclic carbonate has been widely used as a polar aprotic solvent, as an electrolyte in Li-ion batteries, and as precursors for various forms of chemical synthesis such as polycarbonates and polyurethanes. This review provides an overview in terms of the reaction mechanistic pathway and recent advances in the development of several classes of catalysts, including homogeneous organocatalysts (e.g., organic salt, ionic liquid, deep eutectic solvents), organometallic (e.g., mono-, bi-, and tri-metal salen complexes and non-salen complexes) and heterogeneous supported catalysts, and metal organic framework (MOF). Selection of effective catalysts for various epoxide substrates is very important in determining the cycloaddition operating condition. Under their catalytic systems, all classes of these catalysts, with regard to recent developments, can exhibit CO2 cycloaddition of terminal epoxide substrates at ambient temperatures and low CO2 pressure. Although highly desired conversion can be achieved for internal epoxide substrates, higher temperature and pressure are normally required. This includes fatty acid-derived terminal epoxides for oleochemical carbonate production. The production of fully renewable resources by employment of bio-based epoxy with biorefinery concept and potential enhancement of cycloaddition reactions are pointed out as well.

One pot cascade synthesis of fused heterocycles from furan-tethered terminal alkynes and aldehydes in the presence of amines and CuBr

2015 ◽  
Vol 2 (4) ◽  
pp. 394-397
Author(s):  
Yan-Yan Zhang ◽  
Jian Hao ◽  
Min Shi
Keyword(s):  
Terminal Alkynes ◽  
One Pot ◽  
Fused Heterocycles ◽  
High Yields

A novel one-pot protocol for the construction of complex heterocycles through furan tethered terminal alkynes, aldehydes, amines and CuBr upon heating has been developed, giving the cycloadducts in moderate to high yields along with moderate to good regioselectivities.

scholarly journals Asymmetric one-pot synthesis of cyclopropanes

2016 ◽  
Vol 35 (1) ◽  
pp. 45
Author(s):  
Naoufel Ben Hamadi ◽  
Ahlem Guesmi ◽  
Wided Nouira
Keyword(s):  
Escherichia Coli ◽  
Water Soluble ◽  
Gram Negative Bacteria ◽  
Protecting Group ◽  
Gram Positive ◽  
One Pot ◽  
Gram Negative ◽  
Activity Screening ◽  
High Yields

Cycloaddition of the diazoalkanes to electron-deficient olefins (in situ) affords polysubstituted cyclopropanes in high yields (up to 85%). Deprotection of the ketal protecting group provided water-soluble cyclopropane-bearing carbohydrate in good yields. Antimicrobial activity screening of the synthesized compounds 8 and 9, utilizing a variety of Gram-positive (Staphylococcus aureus and Enterococcus fecalis), Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) and yeast (Candida albicans), exhibited that all the prepared analogues acquire promising activities against both Gram-positive and Gram-negative bacteria especially compounds 9b and 9c (antimicrobial active agents against Gram-negative bacteria).

facile, highly efficient and novel method for synthesis of 5-substituted 1H-tetrazoles catalysed by copper(I) chloride

2015 ◽  
Vol 69 (9) ◽  
Author(s):  
İbrahim Esirden ◽  
Erhan Başar ◽  
Muharrem Kaya
Keyword(s):  
Organic Synthesis ◽  
Sodium Azide ◽  
Cycloaddition Reaction ◽  
Reaction Times ◽  
Environmentally Friendly ◽  
Wide Area ◽  
Aryl Nitriles ◽  
Novel Method ◽  
High Yields ◽  
Area Of Application

AbstractThe present study on tetrazole compounds, which have a wide area of application, proposes a new, simple and highly effective method. A series of 5-substituted 1H-tetrazoles were synthesised in DMF via the [3 + 2] cycloaddition reaction, in which different aryl nitriles with sodium azide were used and copper(I) chloride served as a catalyst. Short reaction times, high yields and simple procedures rendered this method attractive and useful for the organic synthesis of 5-substituted 1H-tetrazoles. A further advantage was the use of an environmentally friendly catalyst.

Regio- and Diastereoselective Synthesis of Novel Polycyclic Pyrrolo[2,1-a]isoquinolines Bearing Indeno[1,2-b]quinoxaline Moieties by a Three-Component [3+2]-Cycloaddition Reaction

Synlett ◽  
2019 ◽  
Vol 31 (03) ◽  
pp. 267-271 ◽  
Author(s):  
Firouz Matloubi Moghaddam ◽  
Atiyeh Moafi ◽  
Behzad Jafari ◽  
Alexander Vilinger ◽  
Peter Langer
Keyword(s):  
Cycloaddition Reaction ◽  
Reaction Times ◽  
Dipolar Cycloaddition ◽  
Diastereoselective Synthesis ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
One Pot ◽  
Three Component Reaction ◽  
Relative Stereochemistry ◽  
High Yields

A regio- and diastereoselective synthesis of 2,3-dihydro-10b′H-spiro[indeno[1,2-b]quinoxaline-11,1′-pyrrolo[2,1-a]isoquinoline]-2′,3′-diylbis(phenylmethanone) derivatives containing four contiguous chiral stereocenters was achieved through 1,3-dipolar cycloaddition of isoquinolinium N-ylides in a one-pot three-component reaction. The desired products were obtained in short reaction times and in moderate to high yields (up to 92%) under relatively mild reaction conditions. The structure and relative stereochemistry of the desired product was confirmed by X-ray diffraction analysis.

Sign in / Sign up

Export Citation Format

Share Document