scholarly journals Anti-Irritant and Anti-Inflammatory Effects of DHA Encapsulated in Resveratrol-Based Solid Lipid Nanoparticles in Human Keratinocytes

Nutrients ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1400 ◽  
Author(s):  
Simona Serini ◽  
Roberta Cassano ◽  
Enrica Facchinetti ◽  
Gaia Amendola ◽  
Sonia Trombino ◽  
...  
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Sodium Dodecyl ◽  
Lipid Nanoparticles ◽  
Inflammatory Activity ◽  
Inflammasome Activation ◽  
Cytotoxic Action ◽  
Omega 3 ◽  
Solid Lipid ◽  
Tnf Α

We recently found that the dietary long chain omega-3 polyunsaturated fatty acid (LC-ω-3 PUFA), docosahexaenoic acid (DHA), showed enhanced antineoplastic activity against colon cancer cells if encapsulated in resveratrol-based solid lipid nanoparticles (RV-SLNs). In the present study, we investigated whether the DHA enclosed in RV-SLNs (DHA-RV-SLNs) could have the potential of attenuating irritation and inflammation caused by environmental factors at the skin level. To this aim, we used two keratinocyte lines (HaCaT and NCTC 2544 cells) and exposed them to the cytotoxic action of the surfactant, sodium dodecyl sulfate (SDS), as an in vitro model of irritation, or to the pro-inflammatory activity of the cytokine TNF-α. We found that DHA enclosed in RV-SLNs significantly enhanced its ability to contrast the cytotoxic effect of SDS and to inhibit the SDS- and TNF-α-induced production of the inflammatory cytokines IL-1β, IL-6, and 1 MCP-1, in the two keratinocyte cell lines, as well as the NLRP3 inflammasome activation. Moreover, it more efficiently reduced the upsurge of reactive oxygen species (ROS) levels obtained in the presence of a pro-oxidant (H2O2). Overall, our findings suggest the possibility that a sustained dietary supplementation with DHA-RV-SLNs could efficiently protect skin from the pro-irritant and pro-inflammatory activity of environmental attacks.

LIPID NANOPARTICLES FOR TRANSDERMAL DELIVERY OF CELECOXIB: AN IN VITRO AND IN VIVO INVESTIGATION

INDIAN DRUGS ◽  
2019 ◽  
Vol 56 (08) ◽  
pp. 38-48
Author(s):  
S. V Shinde ◽  
S Nikam ◽  
P Raut ◽  
M. K. Ghag ◽  
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Ex Vivo ◽  
Research Work ◽  
Lipid Nanoparticles ◽  
Inflammatory Activity ◽  
Promising Alternative ◽  
Solid Lipid ◽  
Anti Inflammatory

In the present research work, celecoxib (CXB) loaded solid lipid nanoparticles (SLNs) were prepared using the probe sonication method, wherein Glyceryl monostearate and Tween 80 were used as solid lipid and surfactant, respectively. To obtain the statistically optimized batch, 32 factorial design was applied. The optimized batch was characterized physicochemically and evaluated through DSC, SEM and XRD studies. The mean particle size of the optimized batch was found to be 135.41± 0.24 nm with a mean % entrapment efficiency of 80 ± 1.69%. The optimized batch was further lyophilized and dispersed into 1% w/v Carbopol 934P to form a gel. Prepared gel was further evaluated for in vitro drug release, occlusivity, ex vivo permeability, local toxicity, in vivo anti-inflammatory activity and accelerated stability study. The study resulted in stable, safe and prolonged anti-inflammatory activity with quick onset of action. Hence, celecoxib loaded solid lipid nanoparticles can be considered as promising alternative to conventional topical systems.

scholarly journals Solid Lipid Nanoparticles of Guggul Lipid as Drug Carrier for Transdermal Drug Delivery

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Praveen Kumar Gaur ◽  
Shikha Mishra ◽  
Suresh Purohit
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Inflammatory Activity ◽  
Physical Parameters ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Lipid Component ◽  
Anti Inflammatory

Diclofenac sodium loaded solid lipid nanoparticles (SLNs) were formulated using guggul lipid as major lipid component and analyzed for physical parameters, permeation profile, and anti-inflammatory activity. The SLNs were prepared using melt-emulsion sonication/low temperature-solidification method and characterized for physical parameters, in vitro drug release, and accelerated stability studies, and formulated into gel. Respective gels were compared with a commercial emulgel (CEG) and plain carbopol gel containing drug (CG) for ex vivo and in vivo drug permeation and anti-inflammatory activity. The SLNs were stable with optimum physical parameters. GMS nanoparticle 1 (GMN-1) and stearic acid nanoparticle 1 (SAN-1) gave the highest in vitro drug release. Guggul lipid nanoparticle gel 3 (GLNG-3) showed 104.68 times higher drug content than CEG in receptor fluid. The enhancement ratio of GLNG-3 was 39.43 with respect to CG. GLNG-3 showed almost 8.12 times higherCmaxthan CEG at 4 hours. The AUC value of GLNG-3 was 15.28 times higher than the AUC of CEG. GLNG-3 showed edema inhibition up to 69.47% in the first hour. Physicochemical properties of major lipid component govern the properties of SLN. SLN made up of guggul lipid showed good physical properties with acceptable stability. Furthermore, it showed a controlled drug release profile along with a promising permeation profile.

scholarly journals Solid Lipid Nanoparticles Loaded with Fluorescent-labelled Cyclosporine A: Anti-Inflammatory Activity In Vitro

2014 ◽  
Vol 21 (11) ◽  
pp. 1157-1162 ◽  
Author(s):  
Marina Gallarate ◽  
Loredana Serpe ◽  
Federica Foglietta ◽  
Gian Zara ◽  
Susanna Giordano ◽  
...  
Keyword(s):  
Cyclosporine A ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Inflammatory Activity ◽  
Solid Lipid ◽  
Anti Inflammatory

Development of Solid Lipid Nanoparticles of Lamivudine for Brain Targeting

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Pravin Patil ◽  
Anil Sharma ◽  
Subhash Dadarwal ◽  
Vijay Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Rotation Speed ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Brain Penetration ◽  
Solid Lipid ◽  
Diffusion Technique

The objective of present investigation was to enhance brain penetration of Lamivudine, one of the most widely used drugs for the treatment of AIDS. This was achieved through incorporating the drug into solid lipid nanoparticles (SLN) prepared by using emulsion solvent diffusion technique. The formulations were characterized for surface morphology, size and size distribution, percent drug entrapment and drug release. The optimum rotation speed, resulting into better drug entrapment and percent yield, was in the range of 1000-1250 r/min. In vitro cumulative % drug release from optimized SLN formulation was found 40-50 % in PBS (pH-7.4) and SGF (pH-1.2) respectively for 10 h. After 24 h more than 65 % of the drug was released from all formulations in both mediums meeting the requirement for drug delivery for prolong period of time.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Solid Lipid Nanoparticles (SLNs) Gels for Topical Delivery of Aceclofenac in vitro and in vivo Evaluation

2013 ◽  
Vol 10 (6) ◽  
pp. 656-666 ◽  
Author(s):  
Sandipan Dasgupta ◽  
Surajit Ghosh ◽  
Subhabrata Ray ◽  
Bhaskar Mazumder
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Topical Delivery ◽  
Lipid Nanoparticles ◽  
In Vivo Evaluation ◽  
Solid Lipid
Sign in / Sign up

Export Citation Format

Share Document