scholarly journals Transport Schemes for Fiber-Wireless Technology: Transmission Performance and Energy Efficiency

Photonics ◽  
2014 ◽  
Vol 1 (2) ◽  
pp. 67-82 ◽  
Author(s):  
Christina Lim ◽  
Yizhuo Yang ◽  
Ampalavanapillai Nirmalathas
Keyword(s):  
Energy Efficiency ◽  
Wireless Technology ◽  
Transmission Performance

Air quality metrics and wireless technology to maximize the energy efficiency of HVAC in a working auditorium

2015 ◽  
Vol 85 ◽  
pp. 287-297 ◽  
Author(s):  
Anna Leavey ◽  
Yong Fu ◽  
Mo Sha ◽  
Andrew Kutta ◽  
Chenyang Lu ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Air Quality ◽  
Quality Metrics ◽  
Wireless Technology

scholarly journals Milli meter Wave MIMO-OFDMA Scheme with MMSE-based VEMF in 6G Wireless Technology

2021 ◽  
Vol 12 (3) ◽  
pp. 4701-4707
Author(s):  
G. Jagga Rao Et.al
Keyword(s):  
Energy Efficiency ◽  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Spectrum Efficiency ◽  
Wireless Technology ◽  
Green Communication ◽  
Millimetre Wave ◽  
Ofdma System ◽  
Allocation Process ◽  
Mimo Ofdm

Millimetre Wave (MmWave) massive multiple-input multiple-output (MmWave-massive-MIMO) has developed as beneficial for gigabit-per-second data broadcast into 6G digitized wireless technology. The collection of low-rate and energy-efficient (EE) types of machinery, low power consumptions, multi-bit quantized massive MIMO-Orthogonal Frequency Division Multiplexing Access (OFDMA) structure have been planned for the receiver manner. The main concentration effort is the minimization of a state-of-the-art pilot-symbol quantized (PSQ) massive MIMO-OFDMA system (m-MIMO-OFDM-S). Accordingly, in this analysis, by minimizing many advantages of the Variational Estimated Message Fleeting (VEMF) algorithm. A modified low complexity manner VEMF algorithm is invented for the utilization of the ASQ-m-MIMO-OFDM-S structure. Hence, two new modules improve the energy efficiency and spectrum efficiency for wireless smart 6G technology of pilot bits allocation process for MmWave connections of the hybrid MIMO-OFDM receiver structural design. Several technologies such as massive MIMO-OFDMA, 3GPP & 4G& 5G technology, the device to device communication (D2D), GREEN communication have increasingly important consideration in assisting spectrum consumption along with power consumption during simulations. The proposed VEMF algorithm has achieved higher capacity, sum rate, Energy Efficiency (EE), and throughput for the receiver section. Finally, we present a greater number of user's data transmissions MmWave-massive-MIMO-OFDMA system.

scholarly journals MSCR: multidimensional secure clustered routing scheme in hierarchical wireless sensor networks

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Weidong Fang ◽  
Wuxiong Zhang ◽  
Wei Chen ◽  
Jin Liu ◽  
Yepeng Ni ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Trust Management ◽  
Large Scale ◽  
Cluster Head ◽  
Wireless Sensor ◽  
Transmission Performance ◽  
Management Scheme ◽  
Environment Domain ◽  
Energy Domain ◽  
Application Requirements

AbstractFor hierarchical wireless sensor network (WSN), the clustered routing protocol can effectively deal with large-scale application requirements, thereby, how to efficiently elect the secure cluster heads becomes very critical. Unfortunately, many current studies only focus on improving security while neglecting energy efficiency and transmission performance. In this paper, a lightweight trust management scheme (LTMS) is proposed based on binomial distribution for defending against the internal attacks. Simultaneously, distance domain, energy domain, security domain and environment domain are considered and introduced to propose a multidimensional secure clustered routing (MSCR) scheme by using dynamic dimension weight in hierarchical WSNs. The simulation results show that LTMS can effectively prevent a malicious node from being elected as a cluster head, and MSCR can achieve a balance between security, transmission performance and energy efficiency under the requirements of environmental applications.

Drying and heating of scrap metal at steelmaking: industrial safety, economics, ecology

2020 ◽  
Vol 76 (12) ◽  
pp. 1353-1258
Author(s):  
V. A. Spirin ◽  
V. E. Nikol’skii ◽  
D. V. Vokhmintsev ◽  
A. A. Moiseev ◽  
P. G. Smirnov ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
High Efficiency ◽  
Steel Production ◽  
Scrap Metal ◽  
Industrial Safety ◽  
Technical Solution ◽  
Metal Charge ◽  
Basic Task ◽  
Scrap Heating ◽  
Winter Time

At steel production based on scrap metal utilization, the scrap heating before charging into a melting facility is an important way of energy efficiency increase and ecological parameters improving. In winter time scrap metal charging with ice inclusions into a metal melt can result in a considerable damage of equipment and even accidents. Therefore, scrap preliminary drying is necessary to provide industrial safety. It was shown, that in countries with warm and low-snow climate with no risk of scrap metal icing up during its transportation and storing in the open air, the basic task being solved at the scrap drying is an increase of energy efficiency of steelmaking. InRussiathe scrap metal drying first of all provides the safety of the process and next - energy saving. Existing technologies of scrap metal drying and heating considered, as well as advantages and drawbacks of technical solutions used at Russian steel plants. In winter time during scrap metal heating at conveyers (Consteel process) hot gases penetrate not effectively into its mass, the heat is not enough for evaporation of wetness in the metal charge. At scrap heating by the furnace gases, a problem of dioxines emissions elimination arises. Application of shaft heaters results in high efficiency of scrap heating. However, under conditions of Russian winter the upper scrap layers are not always heated higher 0 °С and after getting into a furnace bath the upper scrap layers cause periodical vapor explosions. The shaft heaters create optimal conditions for dioxines formation, which emit into atmosphere. It was shown, that accounting Russian economic and nature conditions, the metal charge drying and heating in modified charging buckets by the heat of burnt natural gas or other additional fuel is optimal. The proposed technical solution enables to burnt off organic impurities ecologically safely, to melt down ice, to evaporate the wetness in the scrap as well as to heat the charge as enough as the charging logistics enables it. The method was implemented at several Russian steel plants. Technical and economical indices of scrap metal drying in buckets under conditions of EAF-based shop, containing two furnaces ДСП-100, presented.

Perspectives and Regulation of the Russian Market for Project-based Transactions under the Kyoto Protocol

2008 ◽  
pp. 108-125
Author(s):  
K. Zavodov
Keyword(s):  
Energy Efficiency ◽  
Market Mechanism ◽  
Point Of View ◽  
Market Regulation ◽  
Foreign Investments ◽  
Russian Market ◽  
Increase Energy Efficiency ◽  
New Form ◽  
Contract Structure ◽  
Carbon Fund

Project-based transactions (PBTs) are a market mechanism of attracting foreign investments in order to abate greenhouse gas emissions and increase energy efficiency of the country’s enterprises. The article provides a classification and analyzes advantages and drawbacks of PBTs from the point of view of a host country. The main trends and factors determining the dynamics of the PBT market are described. Given that Russia currently lags behind the leaders of the PBT market, an incorporation of a state carbon fund is put forward with an aim of channelling PBTs through it. This paper proposes a form of PBT market regulation by incorporating an option mechanism into the contract structure of a transaction. A comparison of the new form of regulation with the tools that are currently in use in Russia and other countries demonstrates its greater economic efficiency under uncertainty.

Fiscal deduction in Italy for energy efficiency in residential buildings: Some insights

2017 ◽  
pp. 15-29
Author(s):  
Domenico Prisinzano ◽  
Alessandro Federici ◽  
Amalia Martelli ◽  
Chiara Martini ◽  
Roberto Moneta
Keyword(s):  
Energy Efficiency ◽  
Residential Buildings

Analysis of energy efficiency of polder of pumping stations in a Slavsk district of the Kaliningrad region

2020 ◽  
pp. 15-20
Author(s):  
Yuriy Spirin ◽  
Vladimir Puntusov
Keyword(s):  
Energy Efficiency ◽  
Agricultural Land ◽  
Statistical Processing ◽  
Drainage Rate ◽  
Pumping Stations ◽  
Kaliningrad Region ◽  
Pumping Equipment ◽  
Excess Power ◽  
The Cost ◽  
Domestic Power

In the Kaliningrad region there are about 70 % of all polder lands in Russia. On these lands with high potential fertility, it is advisable to intensive agriculture. The area for the average moisture year is an area with excessive moisture, which indicates the need to maintain the rate of drainage on agricultural land. Many different factors play a role in ensuring the drainage rate, one of which is pumping stations and pumping equipment installed on them. An important parameter in the use of pump-power equipment is energy consumption, since in this industry it is a considerable expense item. Improving the energy efficiency of pumping stations on polders is a pressing issue today. At the majority of polder pumping stations, domestic power pumping equipment is installed with excess power and head of 4–8 meters, and a new one is selected based on the maximum possible head in a given place. In the Kaliningrad region, the energy efficiency of polder pumping equipment has never been analyzed. In this paper, a statistical processing of the geodesic pressure of water at the polder pumping stations of the Slavsk region for 2000–2002 was carried out. On the basis of these data and data on the hydraulic characteristics of pressure pipelines, the calculated water pressures were determined for the rational selection of pumping equipment. The calculation of the economic efficiency of pumps with optimal power compared with pumps of excess capacity. The results of the study can serve as a justification for the transition to the pumping equipment with less power and pressure, which will lead to a decrease in the cost of money for electricity.

Sign in / Sign up

Export Citation Format

Share Document