Analysis of energy efficiency of polder of pumping stations in a Slavsk district of the Kaliningrad region

2020 ◽  
pp. 15-20
Author(s):  
Yuriy Spirin ◽  
Vladimir Puntusov
Keyword(s):  
Energy Efficiency ◽  
Agricultural Land ◽  
Statistical Processing ◽  
Drainage Rate ◽  
Pumping Stations ◽  
Kaliningrad Region ◽  
Pumping Equipment ◽  
Excess Power ◽  
The Cost ◽  
Domestic Power

In the Kaliningrad region there are about 70 % of all polder lands in Russia. On these lands with high potential fertility, it is advisable to intensive agriculture. The area for the average moisture year is an area with excessive moisture, which indicates the need to maintain the rate of drainage on agricultural land. Many different factors play a role in ensuring the drainage rate, one of which is pumping stations and pumping equipment installed on them. An important parameter in the use of pump-power equipment is energy consumption, since in this industry it is a considerable expense item. Improving the energy efficiency of pumping stations on polders is a pressing issue today. At the majority of polder pumping stations, domestic power pumping equipment is installed with excess power and head of 4–8 meters, and a new one is selected based on the maximum possible head in a given place. In the Kaliningrad region, the energy efficiency of polder pumping equipment has never been analyzed. In this paper, a statistical processing of the geodesic pressure of water at the polder pumping stations of the Slavsk region for 2000–2002 was carried out. On the basis of these data and data on the hydraulic characteristics of pressure pipelines, the calculated water pressures were determined for the rational selection of pumping equipment. The calculation of the economic efficiency of pumps with optimal power compared with pumps of excess capacity. The results of the study can serve as a justification for the transition to the pumping equipment with less power and pressure, which will lead to a decrease in the cost of money for electricity.

Additional methods to improve the energy efficiency of oil pipeline transportation

2020 ◽  
Vol 10 (5) ◽  
pp. 558-565
Author(s):  
Marat R. Lukmanov ◽  
◽  
Sergey L. Semin ◽  
Pavel V. Fedorov ◽  
◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Pipeline System ◽  
Energy Costs ◽  
Improvement Program ◽  
Oil Pipeline ◽  
Energy Efficiency Improvement ◽  
Oil Transportation ◽  
Pumping Equipment ◽  
Preparatory Work

The challenges of increasing the energy efficiency of the economy as a whole and of certain production sectors in particular are a priority both in our country and abroad. As part of the energy policy of the Russian Federation to reduce the specific energy intensity of enterprises in the oil transportation system, Transneft PJSC developed and implements the energy saving and energy efficiency improvement Program. The application of energy-saving technologies allowed the company to significantly reduce operating costs and emissions of harmful substances. At the same time, further reduction of energy costs is complicated for objective reasons. The objective of this article is to present additional methods to improve the energy efficiency of oil transportation by the example of the organizational structure of Transneft. Possibilities to reduce energy costs in the organization of the operating services, planning and execution of work to eliminate defects and preparatory work for the scheduled shutdown of the pipeline, the use of pumping equipment, including pumps with variable speed drive, the use of various pipelines layouts, changing the volume of oil entering the pipeline system and increase its viscosity.

Опыт использования частотных преобразователей на объектах ООО «Водоканал»

2020 ◽  
Author(s):  
Sergei, Rybel’ ◽  
V. Kuninin ◽  
S. Gerasimov ◽  
A. Bakushin
Keyword(s):  
Inrush Current ◽  
Electric Motors ◽  
Variable Speed ◽  
Variable Speed Drives ◽  
Technical Device ◽  
Advantages And Disadvantages ◽  
Subsequent Period ◽  
Pumping Stations ◽  
Current Water ◽  
Pumping Equipment

Приведен опыт применения частотно-регулируемых электроприводов на насосных станциях ООО Водоканал г. Новокузнецка. Приводятся преимущества и недостатки данного технического устройства. Показано, что в настоящее время использование частотно-регулируемых приводов позволило снизить потребление электроэнергии более чем на 20, уменьшить затраты на ремонт и обслуживание, повысить срок службы электродвигателей, уменьшить величину пускового тока, снизить утечки воды и нагрузку на насосное оборудование и трубопроводную арматуру. Применение частотно-регулируемых электроприводов оправдало себя и в тех случаях, когда требуется регулирование параметров для обеспечения технологии (регулирование скорости, производительности и т. д.), приведение параметров оборудования к требуемым значениям без его замены (в расчете на увеличение загрузки оборудования до номинала в последующий период), компенсация суточной неравномерности потребления воды.The experience of using variable speed drives at the pumping stations operated by Vodokanal LLC in Novokuznetsk is presented. The advantages and disadvantages of this technical device are specified. It is demonstrated that currently, the use of variable speed drives provides for reducing the energy consumption by more than 20, reducing the repair and maintenance costs for improving the service life of electric motors for reducing inrush current, water leaks and the load on the pumping equipment and pipeline valving. The use of variable speed drives has paid off even in case where adjusting the parameters to ensure the technology (velocity, performance, etc.) bringing the equipment parameters to the required values without replacing it (in order to increase the equipment load to the nominal value for the subsequent period) compensating for daily irregularities in water consumption are required.

scholarly journals Selection of filter parameters of Individual water supply systems

2019 ◽  
Vol 110 ◽  
pp. 01072 ◽  
Author(s):  
Vladimir Shcherbakov ◽  
Aleksandr Akulshin ◽  
Aleksandr Bachmetev ◽  
Anatolyi Akulshin
Keyword(s):  
Water Supply ◽  
Water Intake ◽  
Small Diameter ◽  
Design Flow ◽  
Water Supply Systems ◽  
Minimum Diameter ◽  
Water Well ◽  
Pumping Equipment ◽  
The Cost ◽  
Supply Systems

The paper is devoted to the problem of optimal design, construction and operation of water supply systems and their elements. The key element of the system is a water well. The quality of its design and construction determines the operation of the water intake as a whole. Disadvantages in the construction of a well lead to disruption of the entire water supply system of a particular object. The paper proposed a methodology for selecting the optimal diameter and length of the well filter of a water well. Based on the methodology, an example of filter parameters selection for hydrogeological conditions of the city of Kursk is given. The above calculation showed that the use of the entrance velocity criterion in the design of wells can significantly reduce the cost of well construction while ensuring the design flow rate and allowable lowering of the water level. The cost of the filter, depending on the well design, is 20-30% of the total price for its construction. The most important filter parameters affecting the cost of a well are its length and diameter. Justifying the minimum diameter of the filter that ensures the designed water intake and allowable dewatering can significantly reduce the cost of the well, taking into account the fact that modern pumping equipment allows the use of columns of small diameter above the filter.

Efficiency Centered Maintenance of Preheat Train of a Crude Oil Distillation Unit

2020 ◽  
Author(s):  
J. Fajardo ◽  
D. Yabrudy ◽  
D. Barreto ◽  
C. Negrete ◽  
B. Sarria ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Efficiency ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Operational Reliability ◽  
Distillation Unit ◽  
Maintenance Costs ◽  
Oil Refineries ◽  
The Cost

Abstract Nowadays, maintenance is based on the synergistic integration of operational reliability and timely maintenance, which guarantees the required availability and optimal cost. Operational reliability implies producing more, better performance, longer life, and availability. Timely maintenance involves the least time out of service, fewer maintenance costs, fewer operating costs, and less money. In this work, we study the preheating train of a crude distillation unit of a refinery, which processes 994 m3/h, which presents a formation of a fouling layer inside it. Among the impacts of fouling is the reduction in the effectiveness of heat transfer, the increase in fuel consumption, the increase in CO2 emissions, the increase in maintenance costs, and the decrease in the profit margin of process. An appropriate cleaning program of the surface of the heat exchanger network is necessary to preserve its key performance parameters, preferably close to design values. This paper presents the maintenance method centered on energy efficiency, to plan the intervention of the preheating train equipment maintenance, which considers the economic energy improvement and the cost of the type of maintenance. The method requires the calculation of the fouling evolution from which the global heat transfer coefficient is obtained, and the heat flux is determined as a function of time. It was observed that, as time passes, the resistance provided by fouling increases and that the overall heat transfer coefficient decreases. The energy efficiency centered maintenance has an indicator of economic justification (factor J) that relates the economic-energy improvement achieved when performing maintenance, taking into account the economic effort invested. Depending on the cost of the type of maintenance to be performed, a threshold should be chosen, from which the maintenance activity is justified. The effectiveness values of the heat exchanger (ε) and the J indicator are used to form a criticality matrix, which allows prioritizing maintenance activities in each equipment. The planning of the implementation dates of the maintenance of each heat exchanger, from the maintenance method centered on energy efficiency applied to the crude distillation unit’s, preheat train, constitutes a contribution in this specific field. The conceptual design of the maintenance method centered on energy efficiency presented in this work is feasible for other heat transfer equipment used in oil refineries and industry in general. The procedure developed uses real operation values, and with its implementation, a saving of 150000 US dollars was achieved.

scholarly journals Demonstration and Assessment of Purification Cascades for the Separation and Valorization of Hemicellulose from Organosolv Beechwood Hydrolyzates

Membranes ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 82
Author(s):  
Roy Nitzsche ◽  
Hendrik Etzold ◽  
Marlen Verges ◽  
Arne Gröngröft ◽  
Matthias Kraume
Keyword(s):  
Energy Efficiency ◽  
Hydrothermal Treatment ◽  
Experimental Work ◽  
Value Added ◽  
Aspen Plus ◽  
High Potential ◽  
Production Costs ◽  
Specific Production ◽  
The Cost ◽  
Value Added Products

Hemicellulose and its derivatives have a high potential to replace fossil-based materials in various high-value-added products. Within this study, two purification cascades for the separation and valorization of hemicellulose and its derived monomeric sugars from organosolv beechwood hydrolyzates (BWHs) were experimentally demonstrated and assessed. Purification cascade 1 included hydrothermal treatment for converting remaining hemicellulose oligomers to xylose and the purification of the xylose by nanofiltration. Purification cascade 2 included the removal of lignin by adsorption, followed by ultrafiltration for the separation and concentration of hemicellulose. Based on the findings of the experimental work, both cascades were simulated on an industrial scale using Aspen Plus®. In purification cascade 1, 63% of the oligomeric hemicellulose was hydrothermally converted to xylose and purified by nanofiltration to 7.8 t/h of a xylose solution with a concentration of 200 g/L. In purification cascade 2, 80% of the lignin was removed by adsorption, and 7.6 t/h of a purified hemicellulose solution with a concentration of 200 g/L was obtained using ultrafiltration. The energy efficiency of the cascades was 59% and 26%, respectively. Furthermore, the estimation of specific production costs showed that xylose can be recovered from BWH at the cost of 73.7 EUR/t and hemicellulose at 135.1 EUR/t.

scholarly journals PERENCANAAN DAN ANALISIS KELAYAKAN INVESTASI PROYEK PEMASANGAN KAPASITOR BANK PADA INSTALASI PEMANFAATAN ENERGI LISTRIK

2021 ◽  
Vol 9 (1) ◽  
pp. 77-82
Author(s):  
Epiwardi ◽  
Ruwahyoto ◽  
Heri sungkowo
Keyword(s):  
Payback Period ◽  
Economic Life ◽  
Water Pump ◽  
Energy Usage ◽  
Capacitor Banks ◽  
Water Pumping ◽  
Pump Station ◽  
Pumping Stations ◽  
Feasibility Test ◽  
The Cost

The low power factor in the electricity installation of Sumber Wendit 3 water pumping stations causes a bill of excess reactive energy usage or kVARh, so that the cost of using electricity becomes higher. The excess use of reactive energy can be compensated by additional investment in installing capacitor banks in the main distribution panel (MDP) Sumber Wendit 3 water pump station. Based on the data and problems, it is planned to install capacitor banks that meet the standards with a target of 0.90 and 0.95 lagging. From the results of the planning, we need 150 kVAR and 250 kVAR capacitors, with an investment value of Rp. 94,983,790 and - Rp. 120,781,210. After an investment feasibility test using the Payback Period (PP) method, it is known that for a 150 kVAR bank capacitors, the investment return is technically 2.88 months and economically is 4.01 and 3.17 months. For 250 kVAR bank capacitors, the return on investment is technically 3.66 months and economically 5.1 and 4.03 months. When compared with the economic life of the investment is 10 years, the investment of the bank capacitor installation project is very profitable and feasible to carry out

Operation of a CCHP System Using an Optimal Energy Dispatch Algorithm

2008 ◽  
Author(s):  
Heejin Cho ◽  
Sandra D. Eksioglu ◽  
Rogelio Luck ◽  
Louay M. Chamra
Keyword(s):  
Energy Efficiency ◽  
Energy Cost ◽  
Network Flow ◽  
Flow Model ◽  
Energy Requirement ◽  
Optimal Operation ◽  
Operational Conditions ◽  
Optimal Energy ◽  
Network Flow Model ◽  
The Cost

The Combined Cooling, Heating, and Power (CCHP) systems have been widely recognized as a key alternative for thermal and electric energy generation because of the outstanding energy efficiency, reduced environmental emissions, and relative independence from centralized power grids. Nevertheless, the total energy cost of CCHP systems can be highly dependent on the operation of individual components and load balancing. The latter refers to the process of fulfilling the thermal and electrical demand by partitioning or “balancing” the energy requirement between the available sources of energy supply. The energy cost can be optimized through an energy dispatch algorithm which provides operational/control signals for the optimal operation of the equipment. The algorithm provides optimal solutions on decisions regarding generating power locally or buying power from the grid. This paper presents an initial study on developing an optimal energy dispatch algorithm that minimizes the cost of energy (i.e., cost of electricity from the grid and cost of natural gas into the engine and boiler) based on energy efficiency constrains for each component. A deterministic network flow model of a typical CCHP system is developed as part of the algorithm. The advantage of using a network flow model is that the power flows and efficiency constraints throughout the CCHP components can be readily visualized to facilitate the interpretation of the results. A linear programming formulation of the network flow model is presented. In the algorithm, the inputs include the cost of the electricity and fuel and the constraints include the cooling, heating, and electric load demands and the efficiencies of the CCHP components. This algorithm has been used in simulations of several case studies on the operation of an existing micro-CHP system. Several scenarios with different operational conditions are presented in the paper to demonstrate the economical advantages resulting from optimal operation.

scholarly journals Principles of energy saving in water supply and sewage systems

2018 ◽  
Vol 144 ◽  
pp. 04013 ◽  
Author(s):  
Nikolay Makisha ◽  
Tatiana Kazimirova
Keyword(s):  
Energy Efficiency ◽  
Energy Conservation ◽  
Water Supply ◽  
Energy Saving ◽  
The Cost ◽  
Sewage Systems ◽  
Regions Of Russia ◽  
Water Supply And Sanitation

In this paper, we consider energy efficiency in the system of water supply and sanitation. Particular attention is paid to energy conservation techniques, stages of implementation. The review of energy conservation methods, a table of classification, taking into account the cost. The work is aimed at further more detailed study of energy efficiency techniques in the water supply and sanitation and their application in the regions of Russia.

Система дистанційного моніторингу та керування кліматичними параметрами приміщень в процесі промислового виробництва

2020 ◽  
pp. 19-23
Author(s):  
Ігор Бережний ◽  
◽  
Адріан Наконечний ◽  
Keyword(s):  
Energy Efficiency ◽  
Comparative Analysis ◽  
Technological Process ◽  
Remote Monitoring ◽  
High Speed ◽  
Monitoring And Control ◽  
Remote Monitoring And Control ◽  
The Cost ◽  
And Control ◽  
Communication Lines

Based on the research and comparative analysis of existing systems, an algorithm for remote monitoring and control of the technological process using IoT technologies is proposed and developed. We consider a system with flexible algorithms, which combines different data protocols using Wi-Fi technology, which allows you to use this type of system in any industry safely with high speed, energy efficiency and without the cost of communication lines.

RESEARCH OF ENERGY EFFICIENCY OF TWO-CHAMBER PULSE DEVICES FOR STAMPING

2021 ◽  
pp. 128-133
Author(s):  
А.Ю. Боташев ◽  
А.А. Мусаев
Keyword(s):  
Energy Efficiency ◽  
Combustion Chamber ◽  
Electrical Energy ◽  
Energy Carrier ◽  
Thermodynamic Efficiency ◽  
Total Energy Consumption ◽  
Cost Of Energy ◽  
Sheet Stamping ◽  
Fuel Mixtures ◽  
The Cost

Одной из разновидностей устройств, осуществляющих импульсные методы обработки давлением, являются двухкамерные устройства для листовой штамповки, использующие в качестве энергоносителя газовоздушные топливные смеси. Подача сжатого воздуха в камеру сгорания в рассматриваемом двухкамерном устройстве для листовой штамповки осуществляется компрессором. Проведен анализ термодинамических процессов, протекающих в камере сгорания и рабочем цилиндре двухкамерного устройства для листовой штамповки. При этом установлено, что энергия, затрачиваемая на работу компрессора, составляет около 45% от энергии, выделяющейся в камере сгорания. Получена зависимость для определения термодинамического КПД двухкамерных устройств для листовой штамповки, величина его составляет около 0,25. Установлено, что энергоэффективность двухкамерных устройств не уступает энергоэффективности традиционного штамповочного оборудования, при этом затраты на энергоносители двухкамерных устройств ниже за счет использования дешевого энергоносителя. В двухкамерном штамповочном устройстве для листовой штамповки электрическая энергия, используемая на работу компрессора, составляет менее 1/3 общей потребляемой энергии устройства. Поэтому при прочих равных условиях расходы на энергоносители будут значительно меньше, чем в штамповочном оборудовании, работающем на электрическом токе One of the types of devices that carry out pulse methods of pressure treatment are two-chamber devices for sheet stamping, using gas-air fuel mixtures as an energy carrier. The supply of compressed air to the combustion chamber in the considered two-chamber device for sheet stamping is carried out by a compressor. We carried out the analysis of thermodynamic processes taking place in the combustion chamber and the working cylinder of a two-chamber device for sheet stamping. We found that the energy spent on the operation of the compressor is about 45% of the energy released in the combustion chamber. We obtained the dependence for determining the thermodynamic efficiency of two-chamber devices for sheet stamping; its value is about 0.25. We established that the energy efficiency of two-chamber devices is not inferior to the energy efficiency of traditional stamping equipment, while the energy costs of two-chamber devices are lower due to the use of a cheap energy carrier. In a two-chamber die-forging device for sheet metal stamping, the electrical energy used to operate the compressor is less than 1/3 of the total energy consumption of the device. Therefore, all other things being equal, the cost of energy carriers will be significantly less than in stamping equipment operating on electric current

Sign in / Sign up

Export Citation Format

Share Document