scholarly journals Two Is Company, but Four Is a Party—Challenges of Tetraploidization for Cell Wall Dynamics and Efficient Tip-Growth in Pollen

Plants ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2382
Author(s):  
Jens Westermann
Keyword(s):  
Cell Wall ◽  
Tip Growth ◽  
Volume Ratio ◽  
Cell Types ◽  
Land Plant ◽  
Tubular Structures ◽  
Functional Diversification ◽  
Genome Doubling ◽  
Steady Growth ◽  
Growing Cell

Some cells grow by an intricately coordinated process called tip-growth, which allows the formation of long tubular structures by a remarkable increase in cell surface-to-volume ratio and cell expansion across vast distances. On a broad evolutionary scale, tip-growth has been extraordinarily successful, as indicated by its recurrent ‘re-discovery’ throughout evolutionary time in all major land plant taxa which allowed for the functional diversification of tip-growing cell types across gametophytic and sporophytic life-phases. All major land plant lineages have experienced (recurrent) polyploidization events and subsequent re-diploidization that may have positively contributed to plant adaptive evolutionary processes. How individual cells respond to genome-doubling on a shorter evolutionary scale has not been addressed as elaborately. Nevertheless, it is clear that when polyploids first form, they face numerous important challenges that must be overcome for lineages to persist. Evidence in the literature suggests that tip-growth is one of those processes. Here, I discuss the literature to present hypotheses about how polyploidization events may challenge efficient tip-growth and strategies which may overcome them: I first review the complex and multi-layered processes by which tip-growing cells maintain their cell wall integrity and steady growth. I will then discuss how they may be affected by the cellular changes that accompany genome-doubling. Finally, I will depict possible mechanisms polyploid plants may evolve to compensate for the effects caused by genome-doubling to regain diploid-like growth, particularly focusing on cell wall dynamics and the subcellular machinery they are controlled by.

The mechanism of surface growth in parenchyma of Avena coleoptiles

1955 ◽  
Vol 3 (2) ◽  
pp. 137 ◽  
Author(s):  
AB Wardrop
Keyword(s):  
Cell Wall ◽  
Tip Growth ◽  
Cell Types ◽  
Cellulose Microfibrils ◽  
Wall Material ◽  
Cell Wall Material ◽  
Cell Enlargement ◽  
Electron Microscopic ◽  
Stages Of Growth ◽  
Preferred Direction

A study has been made of the organization of the cell wall in the parenchyma of Avena coleoptiles at successive stages of growth, using light and electron microscopic methods. It has been observed that extension of the parenchyma involves a progressive separation of the primary pit fields accompanied by an increasing dispersion of the cellulose microfibrils about their preferred direction of orientation. On the basis of this, and ancillary evidence from other cell types, it is suggested that extension growth involves stretching of the cell with the intercalation of new microfibrils into the expanding cell wall framework from the regions of the primary pit fields and penetration of the cell wall by plasmodesmata. It is considered that the evidence is consistent equally with the view either that the cell wall is stretched as water absorption accompanying enlargement takes place, or that cell enlargement is controlled by the synthesis of cell wall material at synthetic centres (pit fields and plasmodesmata) distributed over the cell surface. The concept of bipolar tip growth for coleoptile parenchyma is rejected.

Potent Chitin Synthase Inhibitors from Plants

2020 ◽  
Vol 16 (1) ◽  
pp. 58-63
Author(s):  
Amrutha Vijayakumar ◽  
Ajith Madhavan ◽  
Chinchu Bose ◽  
Pandurangan Nanjan ◽  
Sindhu S. Kokkal ◽  
...  
Keyword(s):  
Cell Wall ◽  
Candida Albicans ◽  
Caenorhabditis Elegans ◽  
Aspergillus Niger ◽  
Small Molecules ◽  
Tip Growth ◽  
Chitin Synthase ◽  
Chitin Synthesis ◽  
Hyphal Tip Growth ◽  
Hyphal Tip

Background: Chitin is the main component of fungal, protozoan and helminth cell wall. They help to maintain the structural and functional characteristics of these organisms. The chitin wall is dynamic and is repaired, rearranged and synthesized as the cells develop. Active synthesis can be noticed during cytokinesis, laying of primary septum, maintenance of lateral cell wall integrity and hyphal tip growth. Chitin synthesis involves coordinated action of two enzymes namely, chitin synthase (that lays new cell wall) and chitinase (that removes the older ones). Since chitin synthase is conserved in different eukaryotic microorganisms that can be a ‘soft target’ for inhibition with small molecules. When chitin synthase is inhibited, it leads to the loss of viability of cells owing to the self- disruption of the cell wall by existing chitinase. Methods: In the described study, small molecules from plant sources were screened for their ability to interfere with hyphal tip growth, by employing Hyphal Tip Burst assay (HTB). Aspergillus niger was used as the model organism. The specific role of these small molecules in interfering with chitin synthesis was established with an in-vitro method. The enzyme required was isolated from Aspergillus niger and its activity was deduced through a novel method involving non-radioactively labelled substrate. The activity of the potential lead molecules were also checked against Candida albicans and Caenorhabditis elegans. The latter was adopted as a surrogate for the pathogenic helminths as it shares similarity with regard to cell wall structure and biochemistry. Moreover, it is widely studied and the methodologies are well established. Results: Out of the 11 compounds and extracts screened, 8 were found to be prospective. They were also found to be effective against Candida albicans and Caenorhabditis elegans. Conclusion: Purified Methyl Ethyl Ketone (MEK) Fraction1 (F1) of Coconut (Cocos nucifera) Shell Extract (COSE) was found to be more effective against Candida albicans with an IC50 value of 3.04 μg/mL and on L4 stage of Caenorhabditis elegans with an IC50 of 77.8 μg/mL.

Pronounced cytoplasmic pH gradients are not required for tip growth in plant and fungal cells

1997 ◽  
Vol 110 (10) ◽  
pp. 1187-1198 ◽  
Author(s):  
R.M. Parton ◽  
S. Fischer ◽  
R. Malho ◽  
O. Papasouliotis ◽  
T.C. Jelitto ◽  
...  
Keyword(s):  
Tip Growth ◽  
Cell Types ◽  
Pollen Tubes ◽  
Fine Tuning ◽  
Cytoplasmic Ph ◽  
Dual Emission ◽  
Ph Gradients ◽  
Longitudinal Gradients ◽  
External Ph

The existence of pronounced cytoplasmic pH gradients within the apices of tip-growing cells, and the role of cytoplasmic pH in regulating tip growth, were investigated in three different cell types: vegetative hyphae of Neurospora crassa; pollen tubes of Agapanthus umbellatus; and rhizoids of Dryopteris affinis gametophytes. Examination of cytoplasmic pH in growing cells was performed by simultaneous, dual emission confocal ratio imaging of the pH-sensitive probe carboxy SNARF-1. Considerable attention was paid to the fine tuning of dye loading and imaging parameters to minimise cellular perturbation and assess the extent of dye partitioning into organelles. With optimal conditions, cytoplasmic pH was measured routinely with a precision of between +/−0.03 and +/−0.06 of a pH unit and a spatial resolution of 2.3 microm2. Based on in vitro calibration, estimated values of mean cytoplasmic pH for cells loaded with dye-ester were between 7.15 and 7.25 for the three cell types. After pressure injecting Neurospora hyphae with dextran-conjugated dye, however, the mean cytoplasmic pH was estimated to be 7.57. Dextran dyes are believed to give a better estimate of cytoplasmic pH because of their superior localisation and retention within the cytosol. No significant cytoplasmic pH gradient (delta pH of >0.1 unit) was observed within the apical 50 microm in growing cells of any of the three cell types. Acidification or alkalinisation of the cytoplasm in Neurospora hyphae, using a cell permeant weak acid (propionic acid at pH 7.0) or weak base (trimethylamine at pH 8.0), slowed down but did not abolish growth. However, similar manipulation of the cytoplasmic pH of Agapanthus pollen tubes and Dryopteris rhizoids completely inhibited growth. Modification of external pH affected the growth pattern of all cell types. In hyphae and pollen tubes, changes in external pH were found to have a small transient effect on cytoplasmic pH but the cells rapidly readjusted towards their original pH. Our results suggest that pronounced longitudinal gradients in cytoplasmic pH are not essential for the regulation of tip growth.

scholarly journals Ultrastructural Characterization of Flashing Mitochondria

Contact ◽  
2018 ◽  
Vol 1 ◽  
pp. 251525641880142
Author(s):  
Manon Rosselin ◽  
Paula Nunes-Hasler ◽  
Nicolas Demaurex
Keyword(s):  
Electron Microscopy ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Light And Electron Microscopy ◽  
Three Dimensional ◽  
Volume Ratio ◽  
Tubular Structures ◽  
Membrane Contact Sites ◽  
Contact Sites ◽  
Membrane Contact

Mitochondria undergo spontaneous transient elevations in matrix pH associated with drops in mitochondrial membrane potential. These mitopHlashes require a functional respiratory chain and the profusion protein optic atrophy 1, but their mechanistic basis is unclear. To gain insight on the origin of these dynamic events, we resolved the ultrastructure of flashing mitochondria by correlative light and electron microscopy. HeLa cells expressing the matrix-targeted pH probe mitoSypHer were screened for mitopHlashes and fixed immediately after the occurrence of a flashing event. The cells were then processed for imaging by serial block face scanning electron microscopy using a focused ion beam to generate ∼1,200 slices of 10 nm thickness from a 28 µm × 15 µm cellular volume. Correlation of live/fixed fluorescence and electron microscopy images allowed the unambiguous identification of flashing and nonflashing mitochondria. Three-dimensional reconstruction and surface mapping revealed that each tomogram contained two flashing mitochondria of unequal sizes, one being much larger than the average mitochondrial volume. Flashing mitochondria were 10-fold larger than silent mitochondria but with a surface to volume ratio and a cristae volume similar to nonflashing mitochondria. Flashing mitochondria were connected by tubular structures, formed more membrane contact sites, and a constriction was observed at a junction between a flashing mitochondrion and a nonflashing mitochondrion. These data indicate that flashing mitochondria are structurally preserved and bioenergetically competent but form numerous membrane contact sites and are connected by tubular structures, consistent with our earlier suggestion that mitopHlashes might be triggered by the opening of fusion pores between contiguous mitochondria.

scholarly journals Cell-Biological Studies of Osmotic Shock Response in Streptomyces spp

2016 ◽  
Vol 199 (1) ◽  
Author(s):  
Katsuya Fuchino ◽  
Klas Flärdh ◽  
Paul Dyson ◽  
Nora Ausmees
Keyword(s):  
Cell Wall ◽  
Cell Polarity ◽  
Tip Growth ◽  
Biological Study ◽  
Polar Growth ◽  
Hyphal Branching ◽  
Content Type ◽  
Biological Studies ◽  
Wide Range ◽  
Tip Extension

ABSTRACT Most bacteria are likely to face osmotic challenges, but there is yet much to learn about how such environmental changes affect the architecture of bacterial cells. Here, we report a cell-biological study in model organisms of the genus Streptomyces, which are actinobacteria that grow in a highly polarized fashion to form branching hyphae. The characteristic apical growth of Streptomyces hyphae is orchestrated by protein assemblies, called polarisomes, which contain coiled-coil proteins DivIVA and Scy, and recruit cell wall synthesis complexes and the stress-bearing cytoskeleton of FilP to the tip regions of the hyphae. We monitored cell growth and cell-architectural changes by time-lapse microscopy in osmotic upshift experiments. Hyperosmotic shock caused arrest of growth, loss of turgor, and hypercondensation of chromosomes. The recovery period was protracted, presumably due to the dehydrated state of the cytoplasm, before hyphae could restore their turgor and start to grow again. In most hyphae, this regrowth did not take place at the original hyphal tips. Instead, cell polarity was reprogrammed, and polarisomes were redistributed to new sites, leading to the emergence of multiple lateral branches from which growth occurred. Factors known to regulate the branching pattern of Streptomyces hyphae, such as the serine/threonine kinase AfsK and Scy, were not involved in reprogramming of cell polarity, indicating that different mechanisms may act under different environmental conditions to control hyphal branching. Our observations of hyphal morphology during the stress response indicate that turgor and sufficient hydration of cytoplasm are required for Streptomyces tip growth. IMPORTANCE Polar growth is an intricate manner of growth for accomplishing a complicated morphology, employed by a wide range of organisms across the kingdoms of life. The tip extension of Streptomyces hyphae is one of the most pronounced examples of polar growth among bacteria. The expansion of the cell wall by tip extension is thought to be facilitated by the turgor pressure, but it was unknown how external osmotic change influences Streptomyces tip growth. We report here that severe hyperosmotic stress causes cessation of growth, followed by reprogramming of cell polarity and rearrangement of growth zones to promote lateral hyphal branching. This phenomenon may represent a strategy of hyphal organisms to avoid osmotic stress encountered by the growing hyphal tip.

scholarly journals Novel tool to quantify cell wall porosity relates wall structure to cell growth and drug uptake

2019 ◽  
Vol 218 (4) ◽  
pp. 1408-1421 ◽  
Author(s):  
Xiaohui Liu ◽  
Jiazhou Li ◽  
Heyu Zhao ◽  
Boyang Liu ◽  
Thomas Günther-Pomorski ◽  
...  
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Dynamic Structure ◽  
Cell Types ◽  
Antifungal Drugs ◽  
Drug Uptake ◽  
Wall Structure ◽  
Quenching Efficiency ◽  
Model Plant Arabidopsis Thaliana ◽  
Cell Wall Porosity

Even though cell walls have essential functions for bacteria, fungi, and plants, tools to investigate their dynamic structure in living cells have been missing. Here, it is shown that changes in the intensity of the plasma membrane dye FM4-64 in response to extracellular quenchers depend on the nano-scale porosity of cell walls. The correlation of quenching efficiency and cell wall porosity is supported by tests on various cell types, application of differently sized quenchers, and comparison of results with confocal, electron, and atomic force microscopy images. The quenching assay was used to investigate how changes in cell wall porosity affect the capability for extension growth in the model plant Arabidopsis thaliana. Results suggest that increased porosity is not a precondition but a result of cell extension, thereby providing new insight on the mechanism plant organ growth. Furthermore, it was shown that higher cell wall porosity can facilitate the action of antifungal drugs in Saccharomyces cerevisiae, presumably by facilitating uptake.

scholarly journals Catalysts of plant cell wall loosening

F1000Research ◽  
2016 ◽  
Vol 5 ◽  
pp. 119 ◽  
Author(s):  
Daniel J. Cosgrove
Keyword(s):  
Cell Wall ◽  
Plant Cell Wall ◽  
Turgor Pressure ◽  
Wall Stress ◽  
Primary Cell Wall ◽  
Wall Structure ◽  
Xyloglucan Endotransglycosylase ◽  
Growing Cell ◽  
Tensile Forces ◽  
Wall Loosening

The growing cell wall in plants has conflicting requirements to be strong enough to withstand the high tensile forces generated by cell turgor pressure while selectively yielding to those forces to induce wall stress relaxation, leading to water uptake and polymer movements underlying cell wall expansion. In this article, I review emerging concepts of plant primary cell wall structure, the nature of wall extensibility and the action of expansins, family-9 and -12 endoglucanases, family-16 xyloglucan endotransglycosylase/hydrolase (XTH), and pectin methylesterases, and offer a critical assessment of their wall-loosening activity

scholarly journals Molecular cloning, characterization, subcellular localization and dynamics of p23, the mammalian KDEL receptor.

1993 ◽  
Vol 120 (2) ◽  
pp. 325-338 ◽  
Author(s):  
B L Tang ◽  
S H Wong ◽  
X L Qi ◽  
S H Low ◽  
W Hong
Keyword(s):  
Golgi Apparatus ◽  
Brefeldin A ◽  
Cell Types ◽  
In Vitro Translation ◽  
Tubular Structures ◽  
Human Sequence ◽  
Intermediate Compartment ◽  
Membrane Spanning ◽  
Membrane Spanning Domains

We have isolated a cDNA clone (mERD2) for the mammalian (bovine) homologue of the yeast ERD2 gene, which codes for the yeast HDEL receptor. The deduced amino acid sequence bears extensive homology to its yeast counterpart and is almost identical to a previously described human sequence. The sequence predicts a very hydrophobic protein with multiple membrane spanning domains, as confirmed by analysis of the in vitro translation product. The protein encoded by mERD2 (p23) has widespread occurrence, being present in all the cell types examined. p23 was localized to the cis-side of the Golgi apparatus and to a spotty intermediate compartment which mediates ER to Golgi transport. A majority of the intracellular staining could be accumulated in the intermediate compartment by a low temperature (15 degrees C) or brefeldin A. During recovery from these treatments, the spotty intermediate compartment staining of p23 was shifted to the perinuclear staining of the Golgi apparatus and tubular structures marked by p23 were observed. These tubular structures may serve to mediate transport between the intermediate compartment and the Golgi apparatus.

scholarly journals Modification of Cell Wall Polysaccharides during Drying Process Affects Texture Properties of Apple Chips

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Min Xiao ◽  
Jianyong Yi ◽  
Jinfeng Bi ◽  
Yuanyuan Zhao ◽  
Jian Peng ◽  
...  
Keyword(s):  
Cell Wall ◽  
Structural Characteristics ◽  
Volume Ratio ◽  
Short Wave ◽  
Cell Wall Polysaccharide ◽  
Cell Wall Polysaccharides ◽  
Rehydration Ratio ◽  
Pectic Polysaccharides ◽  
Texture Properties ◽  
Instant Controlled Pressure Drop

The influences of hot air drying (AD), medium- and short-wave infrared drying (IR), instant controlled pressure drop drying (DIC), and vacuum freeze drying (FD) on cell wall polysaccharide modification were studied, and the relationship between the modifications and texture properties was analyzed. The results showed that the DIC treated apple chips exhibited the highest crispness (92) and excellent honeycomb-like structure among all the dried samples, whereas the FD dried apple chips had low crispness (10), the minimum hardness (17.4 N), and the highest volume ratio (0.76) and rehydration ratio (7.55). Remarkable decreases in the contents of total galacturonic acid and the amounts of water extractable pectin (WEP) were found in all the dried apple chips as compared with the fresh materials. The highest retention of WEP fraction (102.7 mg/g AIR) was observed in the FD dried apple chips, which may lead to a low structural rigidity and may be partially responsible for the lower hardness of the FD apple chips. In addition, the crispness of the apple chips obtained by DIC treatment, as well as AD and IR at 90°C, was higher than that of the samples obtained from the other drying processes, which might be due to the severe degradation of pectic polysaccharides, considering the results of the amounts of pectic fractions, the molar mass distribution, and concentrations of the WEP fractions. Overall, the data suggested that the modifications of pectic polysaccharides of apple chips, including the amount of the pectic fractions and their structural characteristics and the extent of degradation, significantly affect the texture of apple chips.

Geometric analysis of intrusive growth of wood fibres in Robinia pseudoacacia

IAWA Journal ◽  
2018 ◽  
Vol 39 (2) ◽  
pp. 191-208 ◽  
Author(s):  
Anna B. Wilczek ◽  
Muhammad Iqbal ◽  
Wieslaw Wloch ◽  
Marcin Klisz
Keyword(s):  
Secondary Xylem ◽  
Robinia Pseudoacacia ◽  
Geometric Analysis ◽  
Cell Types ◽  
Vascular Cambium ◽  
Tangential Plane ◽  
Intrusive Growth ◽  
Thin Sections ◽  
Growing Cell ◽  
Vessel Elements

ABSTRACTAll cell types of the secondary xylem arise from the meristematic cells (initials) of the vascular cambium and grow under mechanical constraints emerging from the circular-symmetrical geometry that characterises many tree trunks. The course of intrusive growth of cambial initials has been elucidated, but is yet to be described in the case of xylem fibres. This study explains the geometry of intrusive growth of the secondary xylem fibres in the trunk ofRobinia pseudoacacia.Long series of serial semi-thin sections of the vascular cambium and the differentiating secondary xylem were analysed. Since fibres grow in close vicinity to expanding cells of the derivatives of the vascular cambium, we assumed that they have similar growth conditions. Dealing with the cylindrical tissue of the vascular cambium in a previous study, we used a circularly symmetrical equation for describing the growth mechanism of cambial initials. Like the cambial initials, some of the cambial derivatives differentiating into the various cell types composing the secondary xylem also exhibit intrusive growth between the tangential walls of adjacent cells. As seen in cross sections of the cambium, intrusively growing initials form slanted walls by a gradual transformation of tangential (periclinal) walls into radial (anticlinal) walls. Similarly, the intrusive growth of xylem fibres manifests initially as slants, which are formed due to axial growth of the growing cell tips along the tangential walls of adjacent cells. During this process, the tangential walls of adjacent cells are partly separated and dislocated from the tangential plane. The final shape of xylem fibres, or that of vessel elements and axial parenchyma cells, depends upon the ratio of their intrusiveversussymplastic growths in the axial, circumferential and radial directions.

Sign in / Sign up

Export Citation Format

Share Document