scholarly journals Impact of CO2 on Pyrolysis Products of Bituminous Coal and Platanus Sawdust

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1370 ◽  
Author(s):  
Ying Luo ◽  
Haoxi Ben ◽  
Zhihong Wu ◽  
Kai Nie ◽  
Guangting Han ◽  
...  
Keyword(s):  
Specific Surface ◽  
Bituminous Coal ◽  
Hydroxyl Groups ◽  
High Porosity ◽  
Pyrolysis Oil ◽  
Biomass Pyrolysis ◽  
Element Analysis ◽  
Pyrolysis Products ◽  
Pyrolysis Oils ◽  
The Impact

Abundant studies have been completed about factors on the pyrolysis of coal and biomass. However, few articles laid emphasis on using CO2 as a carrier gas to explore the compositional changes of pyrolysis products in coal and biomass pyrolysis for industrial application and commercial value. The experiments on coal and biomass pyrolysis in N2 and CO2 using a horizontal tube furnace were conducted at 500 °C. The impact of introducing CO2 on the pyrolysis process of bituminous coal and Platanus sawdust was investigated. The nuclear magnetic resonance (NMR) spectra of tar and the characterizations of char including Brunner-Emmet-Teller (BET) measurements, scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectroscopy, and element analysis were studied. The findings in light of the experimental results show that introducing CO2 enhances the coal and biomass pyrolysis in a solid product by promoting the fracture of hydroxyl groups. It also promotes tar decomposition and the release of volatiles, which contribute to the occurrence of char with high porosity, pore volume, and specific surface. Furthermore, higher specific surface enhances the adsorption performance of char as active carbon. Simultaneously, CO2 promotes the increase of oxygen-containing aromatics especially the methoxy-containing aromatics, and the decrease of deoxygenated aromatic hydrocarbons in pyrolysis oils. In addition, the introduction of CO2 changes the amount of aliphatic compounds in various ways for the pyrolysis of coal and biomass. From a perspective of business, the changes in the composition of pyrolysis oil brought by CO2 may create new value for fuel utilization and industrial products.

scholarly journals A Comprehensive Characterization of Pyrolysis Oil from Softwood Barks

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1387 ◽  
Author(s):  
Haoxi Ben ◽  
Fengze Wu ◽  
Zhihong Wu ◽  
Guangting Han ◽  
Wei Jiang ◽  
...  
Keyword(s):  
Radical Reaction ◽  
Douglas Fir ◽  
Pine Bark ◽  
Hydroxyl Groups ◽  
Pyrolysis Oil ◽  
Pyrolysis Products ◽  
Oh Groups ◽  
Pyrolysis Mechanism ◽  
C Value ◽  
Pyrolysis Oils

Pyrolysis of raw pine bark, pine, and Douglas-Fir bark was examined. The pyrolysis oil yields of raw pine bark, pine, and Douglas-Fir bark at 500 °C were 29.18%, 26.67%, and 26.65%, respectively. Both energy densification ratios (1.32–1.56) and energy yields (48.40–54.31%) of char are higher than pyrolysis oils (energy densification ratios: 1.13–1.19, energy yields: 30.16–34.42%). The pyrolysis oils have higher heating values (~25 MJ/kg) than bio-oils (~20 MJ/kg) from wood and agricultural residues, and the higher heating values of char (~31 MJ/kg) are comparable to that of many commercial coals. The elemental analysis indicated that the lower O/C value and higher H/C value represent a more valuable source of energy for pyrolysis oils than biomass. The nuclear magnetic resonance results demonstrated that the most abundant hydroxyl groups of pyrolysis oil are aliphatic OH groups, catechol, guaiacol, and p-hydroxy-phenyl OH groups. The aliphatic OH groups are mainly derived from the cleavage of cellulose glycosidic bonds, while the catechol, guaiacol, and p-hydroxy-phenyl OH groups are mostly attributed to the cleavage of the lignin β–O-4 bond. Significant amount of aromatic carbon (~40%) in pyrolysis oils is obtained from tannin and lignin components and the aromatic C–O bonds may be formed by a radical reaction between the aromatic and aliphatic hydroxyl groups. In this study, a comprehensive analytical method was developed to fully understand and evaluate the pyrolysis products produced from softwood barks, which could offer valuable information on the pyrolysis mechanism of biomass and promote better utilization of pyrolysis products.

scholarly journals Comparative study of a vitrinite-rich and an inertinite-rich Witbank coal (South Africa) using pyrolysis-gas chromatography

2019 ◽  
Vol 6 (4) ◽  
pp. 621-632
Author(s):  
Ofentse M. Moroeng ◽  
Vimbai Mhuka ◽  
Mathew M. Nindi ◽  
R. James Roberts ◽  
Nicola J. Wagner
Keyword(s):  
Bituminous Coal ◽  
Mineral Matter ◽  
Common Source ◽  
Gas Chromatograph ◽  
Geologic History ◽  
Pyrolysis Gas ◽  
Pyrolysis Products ◽  
Molecular Chemistry ◽  
Polycyclic Aromatic ◽  
The Impact

Abstract This study aims to compare iso-rank vitrinite-rich and inertinite-rich coal samples to understand the impact of coal-forming processes on pyrolysis chemistry. A medium rank C bituminous coal was density-fractionated to create a vitrinite-rich and an inertinite-rich sub-sample. The vitrinite-rich sample has 83 vol% total vitrinite (mineral-matter-free basis), whereas the inertinite-rich counterpart has 66 vol% total inertinite. The vitrinite-rich sample is dominated by collotelinite and collodetrinite. Fusinite, semifusinite, and inertodetrinite are the main macerals of the inertinite-rich sample. Molecular chemistry was assessed using a pyrolysis gas chromatograph (py-GC) equipped with a thermal desorption unit coupled to a time of flight mass spectrometer (MS) (py-GC/MS) and solid-state nuclear magnetic resonance (13C CP-MAS SS NMR). The pyrolysis products of the coal samples are generally similar, comprised of low and high molecular weight alkanes, alkylbenzenes, alkylphenols, and alkyl-subtituted polycyclic aromatic hydrocarbons, although the vitrinite-rich sample is chemically more diverse. The lack of diversity exhibited by the inertinite-rich sample upon pyrolysis may be interpreted to suggest that major components were heated in their geologic history. Based on the 13C CP-MAS SS NMR analysis, the inertinite-rich sample has a greater fraction of phenolics, reflected in the py-GC/MS results as substituted and unsubstituted derivatives. The greater abundance of phenolics for the inertinite-rich sample may suggest a fire-related origin for the dominant macerals of this sample. The C2-alkylbenzene isomers (p-xylene and o-xylene) were detected in the pyrolysis products for the vitrinite-rich and inertinite-rich samples, though more abundant in the former. The presence of these in both samples likely reflects common source vegetation for the dominant vitrinite and inertinite macerals.

scholarly journals Preparation and analysis of pyrolysis oils

2020 ◽  
Vol 56 (2) ◽  
pp. 235-249
Author(s):  
T. M. Henarava ◽  
S. M. Leschev ◽  
V. V. Sauchyn ◽  
V. V. Levkina
Keyword(s):  
Chemical Composition ◽  
Sample Preparation ◽  
Water Soluble ◽  
Quantitative Composition ◽  
Pyrolysis Oil ◽  
Pyrolysis Products ◽  
Reliable Analysis ◽  
Liquid Pyrolysis Products ◽  
Pyrolysis Oils ◽  
Promising Source

A critical review of the methods for producing pyrolysis waste oils was carried out, the possibilities and limitations of each approach were discussed. Liquid pyrolysis products (pyrolysis oils) are promising source of valuable chemical compounds, and can be also used as a fuel. A reliable analysis of pyrolysis oils is necessary to study their component composition, basic characteristics and to select the most suitable methods for the extraction of the necessary compounds. It is known that the results of GC-MS analysis of liquid pyrolysis products are usually ambiguous: there are problems of peaks overlapping and incorrect interpretation of the data, due to the complexity of the matrix and the multicomponent composition of the object. The paper presents data on the chemical composition of pyrolysis oils obtained by elemental analysis, IR spectroscopy, NMR spectrometry, GC-MS, GC-GC/MS. Based on the presented results, pyrolysis oil usually contains aromatic compounds, water-soluble substances and hydrocarbons. It was found out that there are conflicting data on the chemical composition of the pyrolysis oils of waste tires in the scientific literature. It is proposed to carry out sequential extraction sample preparation of pyrolysis mixtures to increase the reliability and accuracy of the componential and quantitative composition of the GC-MS method. Obviously, a reliable analysis of complex pyrolysis mixtures without preliminary targeted sample preparation seems unlikely.

scholarly journals Potential and limitations of finite element modelling in assessing structural integrity of coralline algae under future global change

2015 ◽  
Vol 12 (19) ◽  
pp. 5871-5883 ◽  
Author(s):  
L. A. Melbourne ◽  
J. Griffin ◽  
D. N. Schmidt ◽  
E. J. Rayfield
Keyword(s):  
Climate Change ◽  
Finite Element ◽  
Structural Integrity ◽  
Geometric Model ◽  
Algal Growth ◽  
Coralline Algae ◽  
Rocky Shores ◽  
Element Analysis ◽  
Scan Data ◽  
The Impact

Abstract. Coralline algae are important habitat formers found on all rocky shores. While the impact of future ocean acidification on the physiological performance of the species has been well studied, little research has focused on potential changes in structural integrity in response to climate change. A previous study using 2-D Finite Element Analysis (FEA) suggested increased vulnerability to fracture (by wave action or boring) in algae grown under high CO2 conditions. To assess how realistically 2-D simplified models represent structural performance, a series of increasingly biologically accurate 3-D FE models that represent different aspects of coralline algal growth were developed. Simplified geometric 3-D models of the genus Lithothamnion were compared to models created from computed tomography (CT) scan data of the same genus. The biologically accurate model and the simplified geometric model representing individual cells had similar average stresses and stress distributions, emphasising the importance of the cell walls in dissipating the stress throughout the structure. In contrast models without the accurate representation of the cell geometry resulted in larger stress and strain results. Our more complex 3-D model reiterated the potential of climate change to diminish the structural integrity of the organism. This suggests that under future environmental conditions the weakening of the coralline algal skeleton along with increased external pressures (wave and bioerosion) may negatively influence the ability for coralline algae to maintain a habitat able to sustain high levels of biodiversity.

Impact Load Buffering Method Based on Stress Wave Attenuation Principle

2019 ◽  
Vol 11 (02) ◽  
pp. 1950019 ◽  
Author(s):  
Lin Gan ◽  
He Zhang ◽  
Cheng Zhou ◽  
Lin Liu
Keyword(s):  
Stress Wave ◽  
Wave Attenuation ◽  
Impact Load ◽  
Dynamics Simulation ◽  
Scanning System ◽  
Isolation Method ◽  
Element Analysis ◽  
System A ◽  
High Emission ◽  
The Impact

Rotating scanning motor is the important component of synchronous scanning laser fuze. High emission overload environment in the conventional ammunition has a serious impact on the reliability of the motor. Based on the theory that the buffer pad can attenuate the impact stress wave, a new motor buffering Isolation Method is proposed. The dynamical model of the new buffering isolation structure is established by ANSYS infinite element analysis software to do the nonlinear impact dynamics simulation of rotating scanning motor. The effectiveness of Buffering Isolation using different materials is comparatively analyzed. Finally, the Macht hammer impact experiment is done, the results show that in the experience of the 70,000[Formula: see text]g impact acceleration, the new buffering Isolation method can reduce the impact load about 15 times, which can effectively alleviate the plastic deformation of rotational scanning motor and improve the reliability of synchronization scanning system. A new method and theoretical basis of anti-high overload research for Laser Fuze is presented.

scholarly journals Controlled Nanostructuration of Cobalt Oxyhydroxide Electrode Material for Hybrid Supercapacitors

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2325
Author(s):  
Ronan Invernizzi ◽  
Liliane Guerlou-Demourgues ◽  
François Weill ◽  
Alexia Lemoine ◽  
Marie-Anne Dourges ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Energy Storage ◽  
Specific Surface ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Hybrid Supercapacitors ◽  
Cobalt Oxyhydroxide ◽  
Precipitation Medium ◽  
The Impact

Nanostructuration is one of the most promising strategies to develop performant electrode materials for energy storage devices, such as hybrid supercapacitors. In this work, we studied the influence of precipitation medium and the use of a series of 1-alkyl-3-methylimidazolium bromide ionic liquids for the nanostructuration of β(III) cobalt oxyhydroxides. Then, the effect of the nanostructuration and the impact of the different ionic liquids used during synthesis were investigated in terms of energy storage performances. First, we demonstrated that forward precipitation, in a cobalt-rich medium, leads to smaller particles with higher specific surface areas (SSA) and an enhanced mesoporosity. Introduction of ionic liquids (ILs) in the precipitation medium further strongly increased the specific surface area and the mesoporosity to achieve well-nanostructured materials with a very high SSA of 265 m2/g and porosity of 0.43 cm3/g. Additionally, we showed that ILs used as surfactant and template also functionalize the nanomaterial surface, leading to a beneficial synergy between the highly ionic conductive IL and the cobalt oxyhydroxide, which lowers the resistance charge transfer and improves the specific capacity. The nature of the ionic liquid had an important influence on the final electrochemical properties and the best performances were reached with the ionic liquid containing the longest alkyl chain.

Measurement, analysis and prediction of amoxicillin oral dose stability from integrated molecular description approach and accelerated predictive stability (APS)

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Camille Merienne ◽  
Chloe Marchand ◽  
Samira Filali ◽  
Damien Salmon ◽  
Christine Pivot ◽  
...  
Keyword(s):  
Oral Dose ◽  
Shelf Life ◽  
Chromatographic Analysis ◽  
Water Adsorption ◽  
Degradation Mechanism ◽  
Oral Dosage ◽  
Hydroxyl Groups ◽  
Humid Atmosphere ◽  
Intramolecular Hydrogen ◽  
The Impact

AbstractBackgroundStability of low amoxicillin oral dosage form (5 mg) used in reintroduction drug test was not fully documented. Furthermore, the impact of (1) salt moiety of amoxicillin and (2) amoxicillin – excipient interactions upon the antibiotic formulation stability during the storage was not characterized so that the estimation of the pharmaceutical expiration date from shelf-life was uncertain. Thus, the main goal of this study was to estimate the shelf-life of two formulations of amoxicillin, using a semi-predictive methodology.MethodsAmoxicillin sodium (AS) and amoxicillin trihydrate (ATH), corresponding to 5-mg amoxicillin, were compounded with microcrystalline cellulose (MCC) in oral hard capsules which were, then, submitted to four environmental conditions (25 °C / 60% or 80% relative humidity (RH); 40 °C / 75% RH; 60 °C / 5% RH) in climatic chambers for 45 and 84 days. Therefore, the characterization of amoxicillin-MCC mixture was assessed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) The profiles of amoxicillin content (determined by stability indicating chromatographic method) as a function of storage time, temperature and RH were fitted to pre-defined kinetic models performed by accelerated predictive stability (APS).ResultsATR-FTIR analysis of AS, ATH, MCC and bulk specimens stored in heated and humid atmosphere confirmed water sorption to cellulose described by a broad and unresolved 3600 to 3000 cm−1 band associated with (1) general intramolecular and intermolecular hydrogen bonding between water and hydroxyl groups of the cellulose, and with (2) free hydroxyl in cellulose. Moreover, a dramatic decrease of absorption at 1776 and 1687 cm−1 respectively characteristic of the β-lactam ring (νC=O) and amide group (νC=O), was revealed as a consequence of AS and ATH degradation caused by moisturization of bulk. Amoxicillin degradation was established by chromatographic analysis showing faster AS degradation than ATH throughout time exposure. The combined effects of temperature – RH were successfully modeled by APS, where AS and ATH showed accelerated (auto-catalysis degradation mechanism) and linear degradation, respectively. The faster AS degradation was assumed to be linked to lower hydrogen donor to hydrogen acceptor count ratio and polar surface than ATH, increasing the probability of AS hydrolysis by water adsorption to AS-MCC solid dispersion (e.g., by reduction of protective intramolecular hydrogen bonds between AS molecules). Furthermore, the compounding which involved a drastic homogenization of solids may have affected the crystalline degree of MCC with an increase of amorphous phase more sensitive to water adsorption.ConclusionsThe improvement of amoxicillin compounding for oral dose forms might be rationalized by taking into account the molecular descriptors of salt moiety and excipients, improved by the choice of an appropriate process of production, characterized from infrared vibrational spectroscopy and chromatographic analysis and finally predicted from accelerated stability assays.

scholarly journals Airflow Characteristics According to the Change in the Height and Porous Rate of Building Roofs for Efficient Installation of Small Wind Power Generators

2021 ◽  
Vol 13 (10) ◽  
pp. 5688
Author(s):  
Jangyoul You ◽  
Kipyo You ◽  
Minwoo Park ◽  
Changhee Lee
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Turbulence Intensity ◽  
Flow Characteristics ◽  
High Porosity ◽  
Power Generators ◽  
Speed Reduction ◽  
Reduction Effect ◽  
Wind Power Generators ◽  
The Impact

In this paper, the air flow characteristics and the impact of wind power generators were analyzed according to the porosity and height of the parapet installed in the rooftop layer. The wind speed at the top was decreasing as the parapet was installed. However, the wind speed reduction effect was decreasing as the porosity rate increased. In addition, the increase in porosity significantly reduced turbulence intensity and reduced it by up to 40% compared to no railing. In the case of parapets with sufficient porosity, the effect of reducing turbulence intensity was also increased as the height increased. Therefore, it was confirmed that sufficient parapet height and high porosity reduce the effect of reducing wind speed by parapets and significantly reducing the turbulence intensity, which can provide homogeneous wind speed during installation of wind power generators.

scholarly journals Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4169
Author(s):  
Marcel Zambrzycki ◽  
Krystian Sokolowski ◽  
Maciej Gubernat ◽  
Aneta Fraczek-Szczypta
Keyword(s):  
Mechanical Properties ◽  
Specific Surface ◽  
Epoxy Resin ◽  
Surface Area ◽  
Specific Surface Area ◽  
Hybrid Composites ◽  
Department Of Energy ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Secondary Carbon

In this work, we present a comparative study of the impact of secondary carbon nanofillers on the electrical and thermal conductivity, thermal stability, and mechanical properties of hybrid conductive polymer composites (CPC) based on high loadings of synthetic graphite and epoxy resin. Two different carbon nanofillers were chosen for the investigation—low-cost multi-layered graphene nanoplatelets (GN) and carbon black (CB), which were aimed at improving the overall performance of composites. The samples were obtained by a simple, inexpensive, and effective compression molding technique, and were investigated by the means of, i.a., scanning electron microscopy, Raman spectroscopy, electrical conductivity measurements, laser flash analysis, and thermogravimetry. The tests performed revealed that, due to the exceptional electronic transport properties of GN, its relatively low specific surface area, good aspect ratio, and nanometric sizes of particles, a notable improvement in the overall characteristics of the composites (best results for 4 wt % of GN; σ = 266.7 S cm−1; λ = 40.6 W mK−1; fl. strength = 40.1 MPa). In turn, the addition of CB resulted in a limited improvement in mechanical properties, and a deterioration in electrical and thermal properties, mainly due to the too high specific surface area of this nanofiller. The results obtained were compared with US Department of Energy recommendations regarding properties of materials for bipolar plates in fuel cells. As shown, the materials developed significantly exceed the recommended values of the majority of the most important parameters, indicating high potential application of the composites obtained.

Sign in / Sign up

Export Citation Format

Share Document