scholarly journals Preparation and Characterization of 3D Printed PLA-Based Conductive Composites Using Carbonaceous Fillers by Masterbatch Melting Method

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1589 ◽  
Author(s):  
Rui Guo ◽  
Zechun Ren ◽  
Xin Jia ◽  
Hongjie Bi ◽  
Haiying Yang ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Sodium Dodecylbenzene Sulfonate ◽  
Melting Method ◽  
Conductive Composites ◽  
Fused Deposition ◽  
Dodecylbenzene Sulfonate ◽  
Interfacial Compatibility ◽  
Multi Walled Carbon Nanotubes ◽  
Deposition Modeling ◽  
Walled Carbon Nanotubes

This study was aimed at improving the conductivity of polylactic acid (PLA)-based composites by incorporating carbonaceous fillers. The composites with the addition of graphene nanoplatelets (rGO) or multi-walled carbon nanotubes (MWCNTs) were fabricated by the masterbatch melting method in order to improve the dispersion of the two kinds of nano-fillers. The results showed that, with the addition of 9 wt % rGO, the volume electrical resistivity of the composite reached the minimum electrical resistance of 103 Ω·m, at which point the conductive network in the composites was completely formed. The interfacial compatibility, apparent viscosity, and the thermal stability of the composite were also good. The rGO functionalized by sodium dodecylbenzene sulfonate (SDBS) was an efficient method to further improve the electrical conductivity of the composite, compared with tannic acid and MWCNTs. The resistivity was reduced by an order in magnitude. Patterns printed onto different baseplates by fused deposition modeling illustrated that the functionalized composite had certain flexibility and it is suitable for printing complex shapes.

scholarly journals Research on the Application of MWCNTs/PLA Composite Material in the Manufacturing of Conductive Composite Products in 3D Printing

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 635 ◽  
Author(s):  
Jinjie Luo ◽  
Haibao Wang ◽  
Duquan Zuo ◽  
Anping Ji ◽  
Yaowen Liu
Keyword(s):  
Composite Material ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Melt Flow Rate ◽  
Conductive Composites ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

As an advanced manufacturing technology that has been developed in recent years, three-dimensional (3D) printing of macromolecular materials can create complex-shaped components that cannot be realized by traditional processing. However, only a few types of macromolecular materials are suitable for 3D printing: the structure must have a single function, and manufacturing macromolecular functional devices is difficult. In this study, using poly lactic acid (PLA) as a matrix, conductive composites were prepared by adding various contents of multi-walled carbon nanotubes (MWCNTs). The printability and properties of MWCNT/PLA composites with different MWCNT proportions were studied by using the fused deposition modeling (FDM) processing technology of 3D printing. The experimental results showed that high conductivity can be realized in 3D-printed products with a composite material containing 5% MWCNTs; its conductivity was 0.4 ± 0.2 S/cm, its tensile strength was 78.4 ± 12.4 MPa, and its elongation at break was 94.4% ± 14.3%. It had a good melt flow rate and thermal properties, and it enabled smooth printing, thus meeting all the requirements for the 3D printing of consumables.

Optical Humidity Sensor Based on Tapered Fiber with Multi-walled Carbon Nanotubes Slurry

2017 ◽  
Vol 6 (1) ◽  
pp. 97 ◽  
Author(s):  
Habibah Mohamed ◽  
Ninik Irawati ◽  
Fauzan Ahmad ◽  
Mohd Haniff Ibrahim ◽  
Sumiaty Ambran ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Humidity Sensor ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Performance Comparison ◽  
Tapered Fiber ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Deposition Modeling ◽  
Walled Carbon Nanotubes

<p>We demonstrated performance comparison of optical humidity sensor for bare and Multi-walled carbon nanotubes (MWCNTs) slurry coated tapered optical fiber. The starting material for MWCNTs slurry is MWCNTs- acrylonitrile butadiene styrene (ABS) based fused deposition modeling (FDM) 3D printer filament. The ABS was dissolved using acetone to produce MWCNTs-acetone suspension. The MWCNTs-acetone suspension was drop-casted on the tapered fiber to produce MWCNTs slurry by evaporation process at room temperature, which resulted the MWCNTs slurry attach to the tapered fiber. The MWCNTs slurry acts as the cladding for humidity changes measurement. The experimental works showed improvement of sensitivity from 3.811 μW/% of bare tapered fiber to 5.17 μW/% for the coated tapered fiber with MWCNTs slurry when the humidity varied from 45% to 80%.</p>

scholarly journals Rapid Prototyping of Efficient Electromagnetic Interference Shielding Polymer Composites via Fused Deposition Modeling

2018 ◽  
Vol 9 (1) ◽  
pp. 37 ◽  
Author(s):  
Luiz Ecco ◽  
Sithiprumnea Dul ◽  
Débora Schmitz ◽  
Guilherme Barra ◽  
Bluma Soares ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Electromagnetic Interference ◽  
Fused Deposition Modeling ◽  
Processing Parameters ◽  
Emi Shielding ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Deposition Modeling ◽  
Walled Carbon Nanotubes

Acrylonitrile–butadiene–styrene (ABS) filled with 6 wt.% of multi-walled carbon nanotubes and graphene nanoplatelets was extruded in filaments and additively manufactured via fused deposition modeling (FDM). The electrical conductivity and electromagnetic interference shielding efficiency (EMI SE) in the frequency range between 8.2 and 12.4 GHz of the resulting 3D samples were assessed. For comparison purposes, compression molded samples of the same composition were investigated. Electrical conductivity of about 10−4 S·cm−1 and attenuations of the incident EM wave near 99.9% were achieved for the 3D components loaded with multi-walled carbon nanotubes, almost similar to the correspondent compression molded samples. Transmission electron microscopy (TEM) images of ABS composite filaments show that graphene nanoplatelets were oriented along the polymer flow whereas multi-walled carbon nanotubes were randomly distributed after the extrusion process. The electrical conductivity and electromagnetic interference (EMI) shielding properties of compression molded and FDM manufactured samples were compared and discussed in terms of type of fillers and processing parameters adopted in the FDM process, such as building directions and printing patterns. In view of the experimental findings, the role of the FDM processing parameters were found to play a major role in the development of components with enhanced EMI shielding efficiency.

scholarly journals Electrical and Thermal Conductivity of Polylactic Acid (PLA)-Based Biocomposites by Incorporation of Nano-Graphite Fabricated with Fused Deposition Modeling

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 549 ◽  
Author(s):  
Rui Guo ◽  
Zechun Ren ◽  
Hongjie Bi ◽  
Min Xu ◽  
Liping Cai
Keyword(s):  
Thermal Conductivity ◽  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Wood Flour ◽  
Thermoplastic Polyurethane ◽  
Volume Resistivity ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Deposition Modeling ◽  
Walled Carbon Nanotubes

The aim of the study was to improve the electrical and thermal conductivity of the polylactic acid/wood flour/thermoplastic polyurethane composites by Fused Deposition Modeling (FDM). The results showed that, when the addition amount of nano-graphite reached 25 pbw, the volume resistivity of the composites decreased to 108 Ω·m, which was a significant reduction, indicating that the conductive network was already formed. It also had good thermal conductivity, mechanical properties, and thermal stability. The adding of the redox graphene (rGO) combined with graphite into the composites, compared to the tannic acid-functionalized graphite or the multi-walled carbon nanotubes, can be an effective method to improve the performance of the biocomposites, because the resistivity reduced by one order magnitude and the thermal conductivity increased by 25.71%. Models printed by FDM illustrated that the composite filaments have a certain flexibility and can be printed onto paper or flexible baseplates.

scholarly journals On the Feasibility of Printing 3D Composite Objects Based on Polypropylene/Multi-walled Carbon Nanotubes

2019 ◽  
Vol 290 ◽  
pp. 03017 ◽  
Author(s):  
Nicoleta-Violeta Stanciu ◽  
Felicia Stan ◽  
Catalin Fetecau ◽  
Florin Susac
Keyword(s):  
Fused Deposition Modeling ◽  
Mechanical Performance ◽  
Extrusion Process ◽  
Flow Activation Energy ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
3D Composite ◽  
Trial And Error Method ◽  
Walled Carbon Nanotubes ◽  
Printing Direction

In this paper, the feasibility of 3D printing polypropylene/ multi-walled carbon nanotube (PP/MWCNT) composites by fused deposition modeling. First, the rheological behavior of PP with 0.3, 0.5 and 1 wt.% of MWCNT was investigated in order to determine the printability in terms of melt shear viscosity and flow activation energy. Second, the filament extrusion process was optimized by the trial-and-error method in order to obtain round and constant filaments. Finally, tensile specimens were printed and tested in order to determine the mechanical properties at various printing direction. Experimental results show that the PP/MWCNT composite filaments with MWCNT loading up to 1 wt.% have good printability characteristics and can be successfully 3D printed with good mechanical performance.

Dispersion of Carbon Nanotubes in Cement-Based Composites and Its Influence on the Piezoresistivities of Composites

2009 ◽  
Author(s):  
Baoguo Han ◽  
Xun Yu ◽  
Jinping Ou
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Cement Mortar ◽  
Sodium Dodecyl ◽  
Impulsive Loading ◽  
Repeated Loading ◽  
Sodium Dodecylbenzene Sulfonate ◽  
Dodecylbenzene Sulfonate ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (NaDDBS) are used as surfactants to improve the dispersion of multi-walled carbon nanotubes (MWNTs) in cement mortar and fabricate piezoresistive carbon-nanotube/cement mortar composite. The piezoresistivity of carbon-nanotube/cement mortar composite with different content levels of MWNTs and different surfactants were explored under repeated loading and impulsive loading. Experimental results indicate that NaDDBS has higher efficiency than SDS for the dispersion of MWNTs in cement mortar. The response of the electrical resistance of carbon-nanotube/cement mortar composite with NaDDBS to external force is more stable and sensitive than that of carbon-nanotube/cement mortar composite with SDS. These findings indicate that the use of NaDDBS is an effective way for improving the dispersion of MWNTs in cement-based composite and fabricating MWNTs filled cement-based composite with stable and strong piezoresistive response.

scholarly journals Microstructure Evaluation and Thermal–Mechanical Properties of ABS Matrix Composite Filament Reinforced with Multi-Walled Carbon Nanotubes by a Single Screw Extruder for FDM 3D Printing

2021 ◽  
Vol 11 (19) ◽  
pp. 8798
Author(s):  
Thai-Hung Le ◽  
Van-Son Le ◽  
Quoc-Khanh Dang ◽  
Minh-Thuyet Nguyen ◽  
Trung-Kien Le ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Melt Flow Index ◽  
Tensile Tests ◽  
Flow Index ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Composite Filament

This paper reports the synthesis of a new printable ABS–MWCNT composite filament, for use in fused deposition modeling (FDM), using an extrusion technique. Acrylonitrile butadiene styrene (ABS) and multi-walled carbon nanotubes (MWCNTs) were the initial materials used for fabricating the filaments. The MWCNTs were dispersed in ABS resin, then extruded through a single-shaft extruder in filament form, with MWCNT contents of 0.5%, 1%, 1.5%, 2%, 3% or 4% by weight. After extrusion, the diameter of the filaments was about 1.75 mm, making them appropriate for FDM. The as-synthesized filaments were then used in FDM to print out samples, on which tensile tests and other analyses were carried out. The results demonstrate that the sample with 2% MWCNTs had the highest strength value, 44.57 MPa, comprising a 42% increase over that of the pure ABS sample. The morphology and dispersion of MWCNTs in the composite were observed by field emission scanning electron microscopy (FESEM), demonstrating the uniform distribution of MWCNTs in the ABS matrix. The thermal behavior results indicated no significant change in the ABS structure; however, the melt flow index of the filaments decreased with an increase in the MWCNT content.

Effects of Multi-Walled Carbon Nanotubes on the Properties of Acrylonitrile Butadiene Styrene Nanocomposites Potentially Used for Fused Deposition Modeling

2017 ◽  
Vol 898 ◽  
pp. 2384-2391
Author(s):  
Jin Zhu ◽  
Biao Wang
Keyword(s):  
Carbon Nanotubes ◽  
Fused Deposition Modeling ◽  
Loss Modulus ◽  
Linear Thermal Expansion ◽  
Acrylonitrile Butadiene Styrene ◽  
Low Frequencies ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Butadiene Styrene

Multi-walled carbon nanotubes (MWCNTs)/acrylonitrile butadiene styrene (ABS) nanocomposites were prepared by melt blending and then filaments were obtained by melt extrusion method. The Scanning electron microscope (SEM) exhibited good dispersion of MWCNTs in the SAN phase of the ABS matrix. The rheological results showed that incorporation of MWCNTs into ABS resulted in higher storage modulus (G′) and loss modulus (G′′) than those of ABS, especially at low frequencies. The tensile strength and modulus of MWCNT/ABS nanocomposite filaments substantially increased with the MWCNTs content while the elongation at break decreased. Additionally, the addition of MWCNTs decreased the coefficient of linear thermal expansion. This study provides a basis for further development of MWCNT/ABS nanocomposites used for FDM process with desirable mechanical properties and good dimension stability.

scholarly journals A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing

Actuators ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 102
Author(s):  
Antonia Georgopoulou ◽  
Lukas Egloff ◽  
Bram Vanderborght ◽  
Frank Clemens
Keyword(s):  
Fused Deposition Modeling ◽  
Thermoplastic Elastomers ◽  
Pneumatic Actuator ◽  
Shore Hardness ◽  
Sensing Element ◽  
Channel Network ◽  
Pneumatic Actuators ◽  
Conductive Composites ◽  
Fused Deposition ◽  
Deposition Modeling

Soft pneumatic actuators with a channel network (pneu-net) based on thermoplastic elastomers are compatible with fused deposition modeling (FDM). However, conventional filament-based fused deposition modeling (FDM) printers are not well suited for thermoplastic elastomers with a shore hardness (Sh < 70A). Therefore, in this study, a pellet-based FDM printer was used to print pneumatic actuators with a shore hardness of Sh18A. Additionally, the method allowed the in situ integration of soft piezoresistive sensing elements during the fabrication. The integrated piezoresistive elements were based on conductive composites made of three different styrene-ethylene-butylene-styrene (SEBS) thermoplastic elastomers, each with a carbon black (CB) filler with a ratio of 1:1. The best sensor behavior was achieved by the SEBS material with a shore hardness of Sh50A. The dynamic and quasi-static sensor behavior were investigated on SEBS strips with integrated piezoresistive sensor composite material, and the results were compared with TPU strips from a previous study. Finally, the piezoresistive composite was used for the FDM printing of soft pneumatic actuators with a shore hardness of 18 A. It is worth mentioning that 3 h were needed for the fabrication of the soft pneumatic actuator with an integrated strain sensing element. In comparison to classical mold casting method, this is faster, since curing post-processing is not required and will help the industrialization of pneumatic actuator-based soft robotics.

Sign in / Sign up

Export Citation Format

Share Document