scholarly journals Design and Characterization of the Surface Porous UHMWPE Composite Reinforced by Graphene Oxide

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 482
Author(s):  
Xiaohong Chen ◽  
Sheng Zhang ◽  
Lin Zhang ◽  
Ping Zhu ◽  
Gangqiang Zhang
Keyword(s):  
Graphene Oxide ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Chemical Compositions ◽  
Distilled Water ◽  
Mechanical And Tribological Properties ◽  
Ultrahigh Molecular Weight ◽  
Uhmwpe Composites ◽  
Nacl Dissolution ◽  
Uhmwpe Composite

The surface porous ultrahigh molecular weight polyethylene (UHMWPE) composites were successfully fabricated with NaCl and graphene oxide (GO) in the hot-pressing procedure. The GO sheets were evenly dispersed in UHMWPE with the sedimentation method of GO in saturated NaCl. The morphologies, chemical compositions, mechanical, and tribological properties of GO and surface porous GO/NaCl/UHMWPE were investigated. The results show that GO sheet and NaCl could be evenly dispersed in UHMWPE. The regular pores are present on the surface of UHMWPE after NaCl dissolution in distilled water. The wear resistance properties are improved significantly, and the friction properties increased slightly with the addition of GO and NaCl.

Tribological properties of ultrahigh-molecular-weight polyethylene (UHMWPE) composites reinforced with different contents of glass and carbon fibers

2019 ◽  
Vol 71 (1) ◽  
pp. 22-30 ◽  
Author(s):  
Yanzhen Wang ◽  
Zhongwei Yin
Keyword(s):  
Molecular Weight ◽  
Wear Resistance ◽  
Friction Coefficient ◽  
High Performance ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Content Type ◽  
Ultrahigh Molecular Weight ◽  
Pin On Disc ◽  
Uhmwpe Composites ◽  
Uhmwpe Composite

PurposeThis purpose of this study was to investigate the effects of carbon fiber (CF) and/or glass fiber (GF) fillers on the tribological behaviors of ultrahigh-molecular-weight polyethylene (UHMWPE) composites to develop a high-performance water-lubricated journal bearing material.Design/methodology/approachTribological tests were conducted using a pin-on-disc tribometer using polished GCr15 steel pins against the UHMWPE composite discs under dry conditions with a contact pressure of 15 MPa and a sliding speed of 0.15 m/s. Scanning electron microscopy, laser 3D micro-imaging profile measurements and energy-dispersive X-ray spectrometry were used to analyze the morphologies and elemental distributions of the worn surfaces.FindingsThe results showed that hybrid CF and GF fillers effectively improved the wear resistance of the composites. The fiber fillers decreased the contact area, promoted transfer from the polymers and decreased the interlocking and plowing of material pairs, which contributed to the reduction of both the friction coefficient and the wear rate.Originality/valueThe UHMWPE composite containing 12.5 Wt.% CF and 12.5 Wt.% GF showed the best wear resistance of 2.61 × 10−5mm3/(N·m) and the lower friction coefficient of 0.12 under heavy loading. In addition, the fillers changed the worn surface morphology and the wear mechanism of the composites.

Mechanical and thermal properties of graphene oxide/ultrahigh molecular weight polyethylene nanocomposites

RSC Advances ◽  
2015 ◽  
Vol 5 (77) ◽  
pp. 63063-63072 ◽  
Author(s):  
Wenchao Pang ◽  
Zifeng Ni ◽  
Guomei Chen ◽  
Guodong Huang ◽  
Huadong Huang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Graphene Oxide ◽  
Thermal Properties ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Mechanical And Thermal Properties ◽  
Hummers Method ◽  
Ultrahigh Molecular Weight ◽  
Uhmwpe Composites ◽  
Modified Hummers Method

Graphene oxide (GO) was prepared according to a modified Hummers method, and a range of GO/ultrahigh molecular weight polyethylene (UHMWPE) composites were fabricated then their mechanical and thermal properties were investigated.

Structural characterization of ultrahigh-molecular-weight polyethylene reactor powders based on fuming nitric acid etching

Polymer ◽  
1998 ◽  
Vol 39 (24) ◽  
pp. 6127-6135 ◽  
Author(s):  
Hiroki Uehara ◽  
Mitsuhiro Nakae ◽  
Tetsuo Kanamoto ◽  
Osamu Ohtsu ◽  
Akira Sano ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Nitric Acid ◽  
Structural Characterization ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Acid Etching ◽  
Ultrahigh Molecular Weight ◽  
Fuming Nitric Acid

scholarly journals Porous Ultrahigh Molecular Weight Polyethylene/Functionalized Activated Nanocarbon Composites with Improved Biocompatibility

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6065
Author(s):  
Wangxi Fan ◽  
Xiuqin Fu ◽  
Zefang Li ◽  
Junfei Ou ◽  
Zhou Yang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Contact Angle ◽  
Tensile Strength ◽  
Wear Resistance ◽  
Biomedical Applications ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
In Vitro Experiments ◽  
Ultrahigh Molecular Weight ◽  
Uhmwpe Composite

Ultrahigh molecular weight polyethylene (UHMWPE) materials have been prevalent joint replacement materials for more than 45 years because of their excellent biocompatibility and wear resistance. In this study, functionalized activated nanocarbon (FANC) was prepared by grafting maleic anhydride polyethylene onto acid-treated activated nanocarbon. A novel porous UHMWPE composite was prepared by incorporating the appropriate amount of FANC and pore-forming agents during the hot-pressing process for medical UHMWPE powder. The experimental results showed that the best prepared porous UHMWPE/FANC exhibited appropriate tensile strength, porosity, and excellent hydrophilicity, with a contact angle of 65.9°. In vitro experiments showed that the porous UHMWPE/FANC had excellent biocompatibility, which is due to its porous structure and hydrophilicity caused by FANC. This study demonstrates the potential viability for our porous UHMWPE/FANC to be used as cartilage replacement material for biomedical applications.

Sign in / Sign up

Export Citation Format

Share Document