scholarly journals Structure and Dynamics of Highly Attractive Polymer Nanocomposites in the Semi-Dilute Regime: The Role of Interfacial Domains and Bridging Chains

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2749
Author(s):  
Emmanuel N. Skountzos ◽  
Katerina S. Karadima ◽  
Vlasis G. Mavrantzas

Detailed molecular dynamics (MD) simulations are employed to study how the presence of adsorbed domains and nanoparticle bridging chains affect the structural, conformational, thermodynamic, and dynamic properties of attractive polymer nanocomposite melts in the semi-dilute regime. As a model system we have chosen an unentangled poly(ethylene glycol) (PEG) matrix containing amorphous spherical silica nanoparticles with different diameters and at different concentrations. Emphasis is placed on properties such as the polymer mass density profile around nanoparticles, the compressibility of the system, the mean squared end-to-end distance of PEG chains, their orientational and diffusive dynamics, the single chain form factor, and the scattering functions. Our analysis reveals a significant impact of the adsorbed, interfacial polymer on the microscopic dynamic and conformational properties of the nanocomposite, especially under conditions favoring higher surface-to-volume ratios (e.g., for small nanoparticle sizes at fixed nanoparticle loading, or for higher silica concentrations). Simultaneously, adsorbed polymer chains adopt graft-like conformations, a feature that allows them to considerably extend away from the nanoparticle surface to form bridges with other nanoparticles. These bridges drive the formation of a nanoparticle network whose strength (number of tie chains per nanoparticle) increases substantially with increasing concentration of the polymer matrix in nanoparticles, or with decreasing nanoparticle size at fixed nanoparticle concentration. The presence of hydroxyl groups at the ends of PEG chains plays a key role in the formation of the network. If hydroxyl groups are substituted by methoxy ones, the simulations reveal that the number of bridging chains per nanoparticle decreases dramatically, thus the network formed is less dense and less strong mechanically, and has a smaller impact on the properties of the nanocomposite. Our simulations predict further that the isothermal compressibility and thermal expansion coefficient of PEG-silica nanocomposites are significantly lower than those of pure PEG, with their values decreasing practically linear with increasing concentration of the nanocomposite in nanoparticles.

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Tao Chen ◽  
Huan-Yu Zhao ◽  
Rui Shi ◽  
Wen-Feng Lin ◽  
Xiang-Meng Jia ◽  
...  

AbstractAdding small nanoparticles (NPs) into polymer melt can lead to a non-Einstein-like decrease in viscosity. However, the underlying mechanism remains a long-standing unsolved puzzle. Here, for an all-polymer nanocomposite formed by linear polystyrene (PS) chains and PS single-chain nanoparticles (SCNPs), we perform large-scale molecular dynamics simulations and experimental rheology measurements. We show that with a fixed (small) loading of the SCNP, viscosity reduction (VR) effect can be largely amplified with an increase in matrix chain length $$N$$N, and that the system with longer polymer chains will have a larger VR. We demonstrate that such $$N$$N-dependent VR can be attributed to the friction reduction experienced by polymer segment blobs which have similar size and interact directly with these SCNPs. A theoretical model is proposed based on the tube model. We demonstrate that it can well describe the friction reduction experienced by melt polymers and the VR effect in these composite systems.


2014 ◽  
Vol 1619 ◽  
Author(s):  
Sanket A. Deshmukh ◽  
Ganesh Kamath ◽  
Derrick C. Mancini ◽  
Subramanian K.R.S. Sankaranarayanan ◽  
Wei Jiang

ABSTRACTPoly(N-isopropylacrylamide) (PNIPAM) is a thermosensitive polymer that is well-known for its behavior at a lower critical solution temperature (LCST) around 305 K. Below the LCST, PNIPAM is soluble in water, and above this temperature, polymer chains collapse and transform into a globule state. The conformational dynamics of single chains of polymer in a solution is known to be different from those of grafted structures that comprise of an ensemble of such single chains. In this study, we have carried out MD simulations of a mesoscopic nanostructure of PNIPAM polymer chains consisting of 60 monomer units grafted onto gold nanoparticles of different diameters, to study the effect of temperature and core particle size on the polymer conformations. Additionally, we have also studied the effect of grafting density on the coil-to-globule transition exhibited by PNIPAM through the LCST. The systems investigated consisted of ∼3 and ∼6 million atoms. Simulations were carried out below and above the LCST of PNIPAM, at 275K and 325K. Simulation trajectories were analyzed for radius of gyration of PNIPAM chains.


Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 293
Author(s):  
Agustín Blazquez-Martín ◽  
Ester Verde-Sesto ◽  
Angel J. Moreno ◽  
Arantxa Arbe ◽  
Juan Colmenero ◽  
...  

The folding of certain proteins (e.g., enzymes) into perfectly defined 3D conformations via multi-orthogonal interactions is critical to their function. Concerning synthetic polymers chains, the “folding” of individual polymer chains at high dilution via intra-chain interactions leads to so-called single-chain nanoparticles (SCNPs). This review article describes the advances carried out in recent years in the folding of single polymer chains into discrete SCNPs via multi-orthogonal interactions using different reactive chemical species where intra-chain bonding only occurs between groups of the same species. First, we summarize results from computer simulations of multi-orthogonally folded SCNPs. Next, we comprehensively review multi-orthogonally folded SCNPs synthesized via either non-covalent bonds or covalent interactions. Finally, we conclude by summarizing recent research about multi-orthogonally folded SCNPs prepared through both reversible (dynamic) and permanent bonds.


Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2942
Author(s):  
Bhausaheb V. Tawade ◽  
Ikeoluwa E. Apata ◽  
Nihar Pradhan ◽  
Alamgir Karim ◽  
Dharmaraj Raghavan

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the ”grafting from” and ”grafting to” approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.


2021 ◽  
Author(s):  
Fabian R. Bloesser ◽  
Sarah L. Walden ◽  
Ishrath M. Irshadeen ◽  
Lewis C. Chambers ◽  
Christopher Barner-Kowollik

We demonstrate the light-induced, crosslinker mediated collapse of linear polymer chains into single-chain nanoparticles (SCNPs) capable of self-reporting their unfolding.


Computation ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 57
Author(s):  
Constantinos J. Revelas ◽  
Aristotelis P. Sgouros ◽  
Apostolos T. Lakkas ◽  
Doros N. Theodorou

In this article, we publish the one-dimensional version of our in-house code, RuSseL, which has been developed to address polymeric interfaces through Self-Consistent Field calculations. RuSseL can be used for a wide variety of systems in planar and spherical geometries, such as free films, cavities, adsorbed polymer films, polymer-grafted surfaces, and nanoparticles in melt and vacuum phases. The code includes a wide variety of functional potentials for the description of solid–polymer interactions, allowing the user to tune the density profiles and the degree of wetting by the polymer melt. Based on the solution of the Edwards diffusion equation, the equilibrium structural properties and thermodynamics of polymer melts in contact with solid or gas surfaces can be described. We have extended the formulation of Schmid to investigate systems comprising polymer chains, which are chemically grafted on the solid surfaces. We present important details concerning the iterative scheme required to equilibrate the self-consistent field and provide a thorough description of the code. This article will serve as a technical reference for our works addressing one-dimensional polymer interphases with Self-Consistent Field theory. It has been prepared as a guide to anyone who wishes to reproduce our calculations. To this end, we discuss the current possibilities of the code, its performance, and some thoughts for future extensions.


Soft Matter ◽  
2009 ◽  
Vol 5 (16) ◽  
pp. 3014 ◽  
Author(s):  
Gui-Li He ◽  
René Messina ◽  
Hartmut Löwen ◽  
Anton Kiriy ◽  
Vera Bocharova ◽  
...  

2015 ◽  
Vol 43 (5) ◽  
pp. 1023-1032 ◽  
Author(s):  
Thomas Stockner ◽  
Anna Mullen ◽  
Fraser MacMillan

ABC transporters are primary active transporters found in all kingdoms of life. Human multidrug resistance transporter ABCB1, or P-glycoprotein, has an extremely broad substrate spectrum and confers resistance against chemotherapy drug treatment in cancer cells. The bacterial ABC transporter MsbA is a lipid A flippase and a homolog to the human ABCB1 transporter, with which it partially shares its substrate spectrum. Crystal structures of MsbA and ABCB1 have been solved in multiple conformations, providing a glimpse into the possible conformational changes the transporter could be going through during the transport cycle. Crystal structures are inherently static, while a dynamic picture of the transporter in motion is needed for a complete understanding of transporter function. Molecular dynamics (MD) simulations and electron paramagnetic resonance (EPR) spectroscopy can provide structural information on ABC transporters, but the strength of these two methods lies in the potential to characterise the dynamic regime of these transporters. Information from the two methods is quite complementary. MD simulations provide an all atom dynamic picture of the time evolution of the molecular system, though with a narrow time window. EPR spectroscopy can probe structural, environmental and dynamic properties of the transporter in several time regimes, but only through the attachment sites of an exogenous spin label. In this review the synergistic effects that can be achieved by combining the two methods are highlighted, and a brief methodological background is also presented.


1999 ◽  
Vol 35 (1) ◽  
pp. 167-172 ◽  
Author(s):  
Linxi Zhang ◽  
Xianghong Wang ◽  
Haizhu Ma ◽  
Youxing Huang

Sign in / Sign up

Export Citation Format

Share Document