scholarly journals Synergistic Flame Retardant Effect of Barium Phytate and Intumescent Flame Retardant for Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2900
Author(s):  
Linyuan Wang ◽  
Yue Wei ◽  
Hongbo Deng ◽  
Ruiqi Lyu ◽  
Jiajie Zhu ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Barium Carbonate ◽  
Environmentally Friendly ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Application Range ◽  
Peak Heat Release Rate ◽  
Synergistic Flame Retardant

Recently, widespread concern has been aroused on environmentally friendly materials. In this article, barium phytate (Pa-Ba) was prepared by the reaction of phytic acid with barium carbonate in deionized water, which was used to blend with intumescent flame retardant (IFR) as a flame retardant and was added to epoxy resin (EP). Afterward, the chemical structure and thermal stability of Pa-Ba were characterized by Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA), respectively. On this basis, the flammability and flame retardancy of EP composites were researched. It is shown that EP/14IFR/2Ba composite has the highest limiting oxygen index (LOI) value of 30.7%. Moreover, the peak heat release rate (PHRR) of EP/14IFR/2Ba decreases by 69.13% compared with pure EP. SEM and Raman spectra reveal the carbonization quality of EP/14IFR/2Ba is better than that of other composites. The results prove that Pa-Ba can cooperate with IFR to improve the flame retardancy of EP, reducing the addition amount of IFR in EP, thus expanding the application range of EP. In conclusion, adding Pa-Ba to IFR is a more environmentally friendly and efficient method compared with others.

scholarly journals Preparation and properties of flame-retardant epoxy resins containing reactive phosphorus flame retardant

2020 ◽  
Vol 15 ◽  
pp. 155892502090132
Author(s):  
Sang-Hoon Lee ◽  
Seung-Won Oh ◽  
Young-Hee Lee ◽  
Il-Jin Kim ◽  
Dong-Jin Lee ◽  
...  
Keyword(s):  
Impact Strength ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Epoxy Resins ◽  
Phosphorus Content ◽  
Phosphorus Compound ◽  
Phosphorus Compounds ◽  
Limiting Oxygen Index ◽  
The Impact

To prepare flame-retardant epoxy resin, phosphorus compound containing di-hydroxyl group (10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phospha phenanthrene-10-oxide, DOPO-HQ) was reacted with uncured epoxy resin (diglycidyl ether of bisphenol A, YD-128) and then cured using a curing agent (dicyandiamide, DICY). This study focused on the effect of phosphorus compound/phosphorus content on physical properties and flame retardancy of cured epoxy resin. The thermal decomposition temperature of the cured epoxy resins (samples: P0, P1.5, P2.0, and P2.5, the number represents the wt% of phosphorus) increased with increasing the content of phosphorus compound/phosphorus (0/0, 19.8/1.5, 27.8/2.0, and 36.8/2.5 wt%) based on epoxy resin. The impact strength of the cured epoxy resin increased significantly with increasing phosphorus compound content. As the phosphorus compound/phosphorus content increased from 0/0 to 36.8/2.5 wt%, the glass transition temperature (the peak temperature of loss modulus curve) increased from 135.2°C to 142.0°C. In addition, as the content of phosphorous compound increased, the storage modulus remained almost constant up to higher temperature. The limiting oxygen index value of cured epoxy resin increased from 21.1% to 30.0% with increasing phosphorus compound/phosphorus content from 0/0 to 36.8/2.5 wt%. The UL 94 V test result showed that no rating for phosphorus compounds less than 19.8 wt% and V-1 for 27.8 wt%. However, when the phosphorus compound was 36.8 wt%, the V-0 level indicating complete flame retardancy was obtained. In conclusion, the incorporation of phosphorus compounds into the epoxy chain resulted in improved properties such as impact strength and heat resistance, as well as a significant increase in flame retardancy.

Facile preparation of uniform polydopamine particles and its application as an environmentally friendly flame retardant for biodegradable polylactic acid

2020 ◽  
Vol 38 (6) ◽  
pp. 485-503
Author(s):  
Benjamin Tawiah ◽  
Bin Yu ◽  
Anthony Chun Yin Yuen ◽  
Bin Fei
Keyword(s):  
Flame Retardant ◽  
Polylactic Acid ◽  
Flame Retardants ◽  
Environmentally Friendly ◽  
Environmentally Benign ◽  
Commercial Application ◽  
Limiting Oxygen Index ◽  
Gaseous Products ◽  
Peak Heat Release Rate ◽  
Insight Into

The demand for environmentally benign flame retardants for biodegradable polymers has become particularly necessary due to their inherently “green” nature. This work reports intrinsically non-toxic polydopamine (PDA) particles as an efficient and environmentally friendly flame retardant for polylactic acid (PLA). 5 wt% PDA loading resulted in a 22% reduction in the peak heat release rate, 34.7% increase in the fire performance index, and lower CO2 production compared to neat PLA. A limiting oxygen index (LOI) value of 27.5% and a V-2 rating was achieved in the UL-94 vertical burning test. Highly aggregated amorphous particulate char was formed with the increasing content of PDA, and a significant reduction in evolved pyrolysis gaseous products was achieved for the PLA/PDA composites as compared with control PLA. This work provides important insight into the potential commercial application of PDA alone as an efficiently green, environmentally benign flame retardant for bioplastic PLA.

Flame Retardant Effect of a Modified Intumescent Flame Retardant on a Rigid Polyurethane Foam

2017 ◽  
Vol 748 ◽  
pp. 51-54
Author(s):  
Pei Bang Dai ◽  
Lin Ying Yang ◽  
Ting Zheng ◽  
Chang Qin ◽  
Qi Chen Tang
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Composite Foam ◽  
Composite Foams ◽  
Suitable Amount ◽  
Ul 94 ◽  
Pu Foams

A rigid polyurethane (PU) flame retardant composite foam was prepared by the compounding of polyols and diisocyanates with a modified intumescent flame retardant (MIFR). The MIFR was based on the three components of intumescent flame retardant normally used and was modified in a surfactant TX-10 solution. The flame retardancy of the PU flame retardant composite foams were evaluated by using the limiting oxygen index (LOI), the UL-94 (vertical flame) test and scanning electron microscopy (SEM). When MIFR was fixed at 20.0 wt% in PU/MIFR composite foams, the MIFR could enhance the flame retardancy and pass V-0 rating of UL-94 test. The microstructures observed by SEM demonstrate that a suitable amount of MIFR can promote formation of compact intumescent charred layers in PU foams.

Study on the Synthesis and Characterization of a Novel Phosphorus-Nitrogen Containing Intumescent Flame Retardant

2011 ◽  
Vol 399-401 ◽  
pp. 1376-1380
Author(s):  
Li Hua You ◽  
Yin Yin Hui ◽  
Xiang Ning Shi ◽  
Zhi Han Peng
Keyword(s):  
Molecular Structure ◽  
Thermal Properties ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Phosphinic Acid ◽  
Intumescent Flame Retardant ◽  
Synthesis And Characterization ◽  
Limiting Oxygen Index

In this study, a novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) poly(melamine 2-carboxyethyl(phenyl) phosphate)(PMCEP) was prepared via the reaction of 2-carboxyethyl (phenyl) phosphinic acid (CEPPA) and melamine (MEL) in two-steps. Meanwhile, the molecular structure of the chemical compound was determined by FTIR,1H-NMR and elemental analysis; and the thermal properties was investigated by means of TGA. Combustion studies revealed high limiting oxygen index (LOI) indicative of better flame-retardancy properties for PBT resin.

Preparation of lignin–silica hybrids and its application in intumescent flame-retardant poly(lactic acid) system

2012 ◽  
Vol 24 (8) ◽  
pp. 738-746 ◽  
Author(s):  
Rui Zhang ◽  
Xifu Xiao ◽  
Qilong Tai ◽  
Hua Huang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Intumescent Flame Retardant ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Silica Hybrids ◽  
Thermal Stability Of

Lignin–silica hybrids (LSHs) were prepared by sol–gel method and characterized by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). LSH and ammonium polyphosphate (APP) were added into poly(lactic acid) (PLA) as a novel intumescent flame-retardant (IFR) system to improve the flame retardancy of PLA. The flame-retardant effect of APP and LSH in PLA was studied using limiting oxygen index (LOI), vertical burning (UL-94) tests and cone calorimeter. The thermal stability of PLA/APP/LSH composites was evaluated by thermogravimetric analysis (TGA). Additionally, the morphology and components of char residues of the IFR-PLA composites were investigated by SEM and XPS. With the addition of APP/LSH to PLA system, the morphology of the char residue has obviously changed. Compared with PLA/APP and PLA/APP/lignin, a continuous and dense intumescent charring layer with more phosphor in PLA composites is formed, which exhibits better flame retardancy. All the results show that the combination of APP and LSH can improve the flame-retardant property and increase the thermal stability of PLA composites greatly.

Synthesis of a Flame Retardant and Hydrophobic Epoxy Resin with Multiple Elements Synergistic Effect for Tunnel Seepage Prevention Application

2020 ◽  
Vol 842 ◽  
pp. 314-325
Author(s):  
Bin Lin
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Fire Retardant ◽  
Practical Application ◽  
Water Contact ◽  
Limiting Oxygen Index ◽  
New Perspective ◽  
Grouting Materials

Epoxy resin (EP) mortar usually used to repair the cracking of concrete structure under damp environment, but EP is extremely flammable, thus it’s extremely imperative to design a novel multifunction EP grouting materials with flame retardancy and waterproofness for the practical application. Targeting ingenious decoration of EP grouting materials, multiple flame retardant elements (phosphorus, nitrogen and fluorine) are concurrently introduced into a fire retardant and the fire retardant defined as DDM-FNP. The obtained DDM-FNP/EP grouting composite possess high thermal stability, flame retardancy and hydrophobicity. The limiting oxygen index (LOI) value of DDM-FNP/EP composites has a significant improve, which is increased from 26.7 (EP-0) to 35.8 (EP-4). Composites with more than 10 wt% of DDM-FNP could pass UL-94 V-0 rating without dripping. Compared with EP-0, the PHRR and THR of EP-4 are decreased by 31.1% and 21.6%, respectively. In addition, due to the introduction of the F element, the water contact angle of EP composites is changed from 75.2° (hydrophilicity) to 98.6° (hydrophobicity) after the introduction of a certain amount of DDM-FNP flame retardant. Therefore, this work provide a new perspective to design a multifunction EP grouting composite and improve the value of practical application on seepage prevention of tunnel.

scholarly journals Synthesis of a phosphoramidate flame retardant and its flame retardancy on cotton fabrics

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 550-560
Author(s):  
Huaifang Wang ◽  
Yingli Cai ◽  
Zhiming Jiang ◽  
Shengnan Guo ◽  
Ping Zhu
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Cotton Fabrics ◽  
Limiting Oxygen Index ◽  
Flammability Test ◽  
Peak Heat Release Rate ◽  
Structure Surface ◽  
Ft Ir ◽  
Butanetetracarboxylic Acid

AbstractA phosphoramidate flame retardant (dimethyl N,N-bis(2-hydroxyletheyl)phosphoramidate, DMBHP) was synthesized and applied to cotton fabrics for enhancing the flame retardancy. The structure of DMBHP was characterized by FT-IR and NMR. The flame retardancy and combustion behavior of the treated cotton fabrics were evaluated using the vertical flammability test (VFT), limiting oxygen index (LOI), and the cone calorimetric test. Moreover, to further analyze the flame retardant action of DMBHP in cotton fabrics, thermal degradability of the treated fabrics, as well as the chemical structure, surface morphology, and element contents of the char residue of the DMBHP-treated fabrics were also evaluated. The results show that, after treating with DMBHP, the cotton fabrics acquired a LOI value from 18.1 to 31.1 with the concentration increasing to 30% and self-extinguished in VFT tests when treated with up to 15% DMBHP. Besides, the total heat release and the peak heat release rate of DMBHP (30%)-treated fabric decreased obviously compared with the pure cotton along with more residue retained. TG, SEM, and EDS results of treated cotton fabric and the corresponding residue after burning showed that DMBHP has the capability of enhancing char formation. In addition, DMBHP will confer cotton fabrics a certain durability against washing with the help of 1,2,3,4-butanetetracarboxylic acid (BTCA) and citric acid (CA).

Sign in / Sign up

Export Citation Format

Share Document