scholarly journals In-Situ Isothermal Crystallization of Poly(l-lactide)

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3377
Author(s):  
Zirui Huang ◽  
Meiling Zhong ◽  
Haibo Yang ◽  
Enqin Xu ◽  
Dehui Ji ◽  
...  
Keyword(s):  
High Temperature ◽  
Nucleation Rate ◽  
Low Temperatures ◽  
Isothermal Crystallization ◽  
The Other ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures

The isothermal crystallization of poly(l-lactide) (PLLA) has been investigated by in-situ wide angle X-ray diffraction (WAXD) and polarized optical microscopes (POM) equipped with a hot-stage accessory. Results showed that the spherulites of PLLA were formed at high temperature, whereas irregular morphology was observed under a low temperature. This can be attributed to the varying rates of crystallization of PLLA at different temperatures. At low temperatures, the nucleation rate is fast and hence the chains diffuse very slow, resulting in the formation of imperfect crystals. On the other hand, at high temperatures, the nucleation rate is slow and the chains diffuse fast, leading to the formation of perfect crystals. The change in the value of the Avrami exponent with temperature further verifies the varying trend in the morphological feature of the crystals.

Evolution of Carbon Fiber Microstructure During Carbonization and High-Temperature Graphitization Measured In Situ Using Synchrotron Wide-Angle X-ray Diffraction

2015 ◽  
Vol 1754 ◽  
pp. 13-18 ◽  
Author(s):  
Michael Behr ◽  
James Rix ◽  
Brian Landes ◽  
Bryan Barton ◽  
Eric Hukkanen ◽  
...  
Keyword(s):  
High Temperature ◽  
Carbon Fiber ◽  
Tensile Modulus ◽  
Fiber Bundles ◽  
Wide Angle ◽  
High Modulus ◽  
Structure Property ◽  
X Ray Diffraction ◽  
X Ray

ABSTRACTThis paper will discuss the structure-property model developed that correlates the tensile modulus to the elastic properties and angular distribution of constituent graphitic layers for carbon fiber derived from a polyethylene precursor. In addition, a high-temperature fiber tensile device was built to enable heating of carbon fiber bundles at a variable rate from 25 °C to greater than ∼2300 °C, while simultaneously applying a tensile stress. This capability combined with synchrotron wide-angle x-ray diffraction (WAXD), enabled observation in situ and in real time of the microstructural transformation from different carbon fiber precursors to high-modulus carbon fiber. Experiments conducted using PAN- and PE-derived fiber precursors reveal stark differences in their carbonization and high-temperature graphitization behavior.

scholarly journals High-temperature Fe oxidation coupled with redistribution of framework cations in lobanovite, K2Na(Fe2+ 4Mg2Na)Ti2(Si4O12)2O2(OH)4 – the first titanosilicate case

2019 ◽  
Vol 75 (4) ◽  
pp. 578-590 ◽  
Author(s):  
Elena S. Zhitova ◽  
Andrey A. Zolotarev ◽  
Frank C. Hawthorne ◽  
Sergey V. Krivovichev ◽  
Viktor N. Yakovenchuk ◽  
...  
Keyword(s):  
High Temperature ◽  
Elevated Temperatures ◽  
Iron Oxidation ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Bond Strengths ◽  
Increasing Temperature

The high-temperature (HT) behaviour of lobanovite, K2Na(Fe2+ 4Mg2Na)Ti2(Si4O12)2O2(OH)4, was studied using in situ powder X-ray diffraction in the temperature range 25–1000°C and ex situ single-crystal X-ray diffraction of 17 crystals quenched from different temperatures. HT iron oxidation associated with dehydroxylation starts at 450°C, similar to other ferrous-hydroxy-rich heterophyllosilicates such as astrophyllite and bafertisite. A prominent feature of lobanovite HT crystal chemistry is the redistribution of Fe and Mg+Mn cations over the M(2), M(3), M(4) sites of the octahedral (O) layer that accompanies iron oxidation and dehydroxylation. This HT redistribution of cations has not been observed in titanosilicates until now, and seems to be triggered by the need to maintain bond strengths at the apical oxygen atom of the TiO5 pyramid in the heteropolyhedral (H) layer during oxidation–dehydroxylation. Comparison of the HT behaviour of lobanovite with five-coordinated Ti and astrophyllite with six-coordinated Ti shows that the geometry of the Ti polyhedron plays a key role in the HT behaviour of heterophyllosilicates. The thermal expansion, geometrical changes and redistribution of site occupancies which occur in lobanovite under increasing temperature are reported. A brief discussion is given of minerals in which the cation ordering (usually for Fe and Mg) occurs together with iron oxidation–dehydroxylation at elevated temperatures: micas, amphiboles and tourmalines. Now this list is expanded by the inclusion of titanosilicate minerals.

A Low-High Temperature Camera for In-Situ X-Ray Diffraction Studies of Catalysts

1983 ◽  
Vol 27 ◽  
pp. 285-291
Author(s):  
J. Pielaszek ◽  
J.B. Cohen
Keyword(s):  
High Temperature ◽  
Porous Silica ◽  
X Ray Diffraction ◽  
X Ray ◽  
Controlled Atmospheres ◽  
Research Areas ◽  
High Temperature Xrd ◽  
Different Temperatures ◽  
Porous Silica Glass

X-Ray diffraction studies of substances under controlled atmospheres and at different temperatures are of great importance in many research areas. This is especially true in the area of catalysis, where the correlation of structural and catalytic properties is needed. The camera described here was made for this purpose although any sample in the powdered form can be studied as well. Many catalysts are in the form of highly dispersed metal deposited on a granulated support. The content of metal may vary from a few tenths to several percent. In a camera used by Janko and Borodzinski a small amount of catalyst was spread out on a porous silica glass sample holder which then was placed in a high temperature XRD camera with flowing gas of controlled composition.

scholarly journals A Superhydrophobic, Antibacterial, and Durable Surface of Poplar Wood

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1885
Author(s):  
Xinyu Wu ◽  
Feng Yang ◽  
Jian Gan ◽  
Zhangqian Kong ◽  
Yan Wu
Keyword(s):  
Stearic Acid ◽  
Antibacterial Properties ◽  
Alkali Resistance ◽  
Poplar Wood ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Acid And Alkali Resistance ◽  
The Stability

The silver particles were grown in situ on the surface of wood by the silver mirror method and modified with stearic acid to acquire a surface with superhydrophobic and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray energy spectroscopy (XPS) were used to analyze the reaction mechanism of the modification process. Scanning electron microscopy (SEM) and contact angle tests were used to characterize the wettability and surface morphology. A coating with a micro rough structure was successfully constructed by the modification of stearic acid, which imparted superhydrophobicity and antibacterial activity to poplar wood. The stability tests were performed to discuss the stability of its hydrophobic performance. The results showed that it has good mechanical properties, acid and alkali resistance, and UV stability. The durability tests demonstrated that the coating has the function of water resistance and fouling resistance and can maintain the stability of its hydrophobic properties under different temperatures of heat treatment.

Time-resolved isothermal crystallization of absorbable PGA-co-PLA copolymer by synchrotron small-angle X-ray scattering and wide-angle X-ray diffraction

Polymer ◽  
2001 ◽  
Vol 42 (21) ◽  
pp. 8965-8973 ◽  
Author(s):  
Zhi-Gang Wang ◽  
Xuehui Wang ◽  
Benjamin S. Hsiao ◽  
Saša Andjelić ◽  
Dennis Jamiolkowski ◽  
...  
Keyword(s):  
Small Angle ◽  
Isothermal Crystallization ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
Ray Scattering

In situ time resolved wide angle X-ray diffraction study of nanotube carpet growth: Nature of catalyst particles and progressive nanotube alignment

Carbon ◽  
2015 ◽  
Vol 87 ◽  
pp. 246-256 ◽  
Author(s):  
Périne Landois ◽  
Mathieu Pinault ◽  
Stéphan Rouzière ◽  
Dominique Porterat ◽  
Cristian Mocuta ◽  
...  
Keyword(s):  
Diffraction Study ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
Time Resolved ◽  
X Ray

PHASE TRANSITION IN LAYERED PEROVSKITE LIKE MANGANATE Ca3Mn2O7 UNDER HIGH PRESSURE

2001 ◽  
Vol 15 (18) ◽  
pp. 2491-2497 ◽  
Author(s):  
J. L. ZHU ◽  
L. C. CHEN ◽  
R. C. YU ◽  
F. Y. LI ◽  
J. LIU ◽  
...  
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Diamond Anvil Cell ◽  
The Other ◽  
Layered Perovskite ◽  
X Ray Diffraction ◽  
Two Phase ◽  
X Ray ◽  
Diamond Anvil

In situ high pressure energy dispersive X-ray diffraction measurements on layered perovskite-like manganate Ca 3 Mn 2 O 7 under pressures up to 35 GPa have been performed by using diamond anvil cell with synchrotron radiation. The results show that the structure of layered perovskite-like manganate Ca 3 Mn 2 O 7 is unstable under pressure due to the easy compression of NaCl-type blocks. The structure of Ca 3 Mn 2 O 7 underwent two phase transitions under pressures in the range of 0~35 GPa. One was at about 1.3 GPa with the crystal structure changing from tetragonal to orthorhombic. The other was at about 9.5 GPa with the crystal structure changing from orthorhombic back to another tetragonal.

scholarly journals In-Situ X-ray Diffraction Measurement for Pure Niobium Metal in High Temperature Hydrogen Atmosphere

2006 ◽  
Vol 70 (6) ◽  
pp. 467-472 ◽  
Author(s):  
Tomonori Nambu ◽  
Nobue Shimizu ◽  
Hisakazu Ezaki ◽  
Hiroshi Yukawa ◽  
Masahiko Morinaga ◽  
...  
Keyword(s):  
High Temperature ◽  
Hydrogen Atmosphere ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pure Niobium
Sign in / Sign up

Export Citation Format

Share Document