scholarly journals Efficient Film Fabrication and Characterization of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) (PEDOT:PSS)-Metalloporphine Nanocomposite and Its Application as Semiconductor Material

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 4008
Author(s):  
María Elena Sánchez-Vergara ◽  
Leon Hamui ◽  
Daniela González-Verdugo ◽  
Ismael Cosme
Keyword(s):  
Forward Bias ◽  
Composite Films ◽  
Optoelectronic Devices ◽  
Force Microscopy ◽  
Atomic Force ◽  
Infrared And Raman Spectroscopy ◽  
Semiconductor Behavior ◽  
Optical Behavior ◽  
Quinoid Structure

The use of composite films with semiconductor behavior is an alternative to enhance the efficiency of optoelectronic devices. Composite films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and metalloporphines (MPs; M = Co, Cu, Pd) have been prepared by spin-coating. The PEDOT:PSS-MP films were treated with isopropanol (IPA) vapor to modify the polymer structure from benzoid to quinoid. The quinoid structure promotes improvements in the optical and electrical behavior of films. The composite films’ morphology and structure were characterized using infrared and Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Composite films were analyzed for their optical behavior by ultraviolet-visible spectroscopy: at λ < 450 nm, the films become transparent, indicating the capacity to be used as transparent electrodes in optoelectronic devices. At λ ≥ 450 nm, the absorbance in the films increased significantly. The CoP showed an 8 times larger current density compared to the CuP. A light induced change in the J-V curves was observed, and it is larger for the CoP. The conductivity values yielded between 1.23 × 102 and 1.92 × 103 Scm−1 and were higher in forward bias.

scholarly journals Synthesis and Characterization of PLA-Micro-structured Hydroxyapatite Composite Films

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 274 ◽  
Author(s):  
Andreea Madalina Pandele ◽  
Andreea Constantinescu ◽  
Ionut Cristian Radu ◽  
Florin Miculescu ◽  
Stefan Ioan Voicu ◽  
...  
Keyword(s):  
Composite Films ◽  
Synthesis Method ◽  
Polymer Chains ◽  
Force Microscopy ◽  
Degradation Temperature ◽  
Atomic Force ◽  
Hydroxyapatite Composite ◽  
Ft Ir ◽  
Ir And Raman

This article presents a facile synthesis method used to obtain new composite films based on polylactic acid and micro-structured hydroxyapatite particles. The composite films were synthesized starting from a polymeric solution in chloroform (12 wt.%) in which various concentrations of hydroxyapatite (1, 2, and 4 wt.% related to polymer) were homogenously dispersed using ultrasonication followed by solvent evaporation. The synthesized composite films were morphologically (through SEM and atomic force microscopy (AFM)) and structurally (through FT-IR and Raman spectroscopy) characterized. The thermal behavior of the composite films was also determined. The SEM and AFM analyses showed the presence of micro-structured hydroxyapatite particles in the film’s structure, as well as changes in the surface morphology. There was a significant decrease in the crystallinity of the composite films compared to the pure polymer, this being explained by a decrease in the arrangement of the polymer chains and a concurrent increase in the degree of their clutter. The presence of hydroxyapatite crystals did not have a significant influence on the degradation temperature of the composite film.

Rapid, Refined, and Robust Method for Expression, Purification, and Characterization of Recombinant Human Amyloid-beta M1-42

2019 ◽  
Author(s):  
Priya Prakash ◽  
Travis Lantz ◽  
Krupal P. Jethava ◽  
Gaurav Chopra
Keyword(s):  
Amyloid Beta ◽  
Western Blots ◽  
Force Microscopy ◽  
E Coli ◽  
Atomic Force ◽  
Set Up ◽  
Short Time

Amyloid plaques found in the brains of Alzheimer’s disease (AD) patients primarily consists of amyloid beta 1-42 (Ab42). Commercially, Ab42 is synthetized using peptide synthesizers. We describe a robust methodology for expression of recombinant human Ab(M1-42) in Rosetta(DE3)pLysS and BL21(DE3)pLysS competent E. coli with refined and rapid analytical purification techniques. The peptide is isolated and purified from the transformed cells using an optimized set-up for reverse-phase HPLC protocol, using commonly available C18 columns, yielding high amounts of peptide (~15-20 mg per 1 L culture) in a short time. The recombinant Ab(M1-42) forms characteristic aggregates similar to synthetic Ab42 aggregates as verified by western blots and atomic force microscopy to warrant future biological use. Our rapid, refined, and robust technique to purify human Ab(M1-42) can be used to synthesize chemical probes for several downstream in vitro and in vivo assays to facilitate AD research.

Stereometric characterization of Dinizia excelsa Ducke wood from Amazon rainforest using atomic force microscopy

2021 ◽  
Author(s):  
Willian Silva Conceição ◽  
Ştefan Ţălu ◽  
Robert Saraiva Matos ◽  
Glenda Quaresma Ramos ◽  
Fidel Guereiro Zayas ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Amazon Rainforest ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dinizia Excelsa

scholarly journals A Universal Model for the Log-Normal Distribution of Elasticity in Polymeric Gels and Its Relevance to Mechanical Signature of Biological Tissues

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 64
Author(s):  
Arnaud Millet
Keyword(s):  
Elastic Modulus ◽  
Normal Distribution ◽  
Biological Tissues ◽  
Force Microscopy ◽  
Polymeric Gels ◽  
Atomic Force ◽  
Clear Explanation ◽  
Log Normal ◽  
Log Normal Distribution

The mechanosensitivity of cells has recently been identified as a process that could greatly influence a cell’s fate. To understand the interaction between cells and their surrounding extracellular matrix, the characterization of the mechanical properties of natural polymeric gels is needed. Atomic force microscopy (AFM) is one of the leading tools used to characterize mechanically biological tissues. It appears that the elasticity (elastic modulus) values obtained by AFM presents a log-normal distribution. Despite its ubiquity, the log-normal distribution concerning the elastic modulus of biological tissues does not have a clear explanation. In this paper, we propose a physical mechanism based on the weak universality of critical exponents in the percolation process leading to gelation. Following this, we discuss the relevance of this model for mechanical signatures of biological tissues.

In Situ Characterization of the Mechanical Behavior of Gecko's Spatulae by Atomic Force Microscopy

2013 ◽  
Vol 22 ◽  
pp. 85-93
Author(s):  
Shuang Yi Liu ◽  
Min Min Tang ◽  
Ai Kah Soh ◽  
Liang Hong
Keyword(s):  
Mechanical Behavior ◽  
Hierarchical Level ◽  
Intrinsic Properties ◽  
In Situ Characterization ◽  
Force Microscopy ◽  
Atomic Force ◽  
Theoretical Predictions ◽  
Multi Mode

In-situ characterization of the mechanical behavior of geckos spatula has been carried out in detail using multi-mode AFM system. Combining successful application of a novel AFM mode, i.e. Harmonix microscopy, the more detail elastic properties of spatula is brought to light. The results obtained show the variation of the mechanical properties on the hierarchical level of a seta, even for the different locations, pad and stalk of the spatula. A model, which has been validated using the existing experimental data and phenomena as well as theoretical predictions for geckos adhesion, crawling and self-cleaning of spatulae, is proposed in this paper. Through contrast of adhesive and craw ability of the gecko on the surfaces with different surface roughness, and measurement of the surface adhesive behaviors of Teflon, the most effective adhesion of the gecko is more dependent on the intrinsic properties of the surface which is adhered.

Measurement of Plasticity Gradients with Scanning Probe Microscopy

1993 ◽  
Vol 318 ◽  
Author(s):  
James D. Kiely ◽  
Dawn A. Bonnell
Keyword(s):  
Fracture Surface ◽  
Scanning Probe Microscopy ◽  
Scanning Probe ◽  
Scanning Tunneling ◽  
Ceramic System ◽  
Force Microscopy ◽  
Metal Fracture ◽  
Atomic Force ◽  
Metal Ceramic

ABSTRACTScanning Tunneling and Atomic Force Microscopy were used to characterize the topography of fractured Au /sapphire interfaces. Variance analysis which quantifies surface morphology was developed and applied to the characterization of the metal fracture surface of the metal/ceramic system. Fracture surface features related to plasticity were quantified and correlated to the fracture energy and energy release rate.

Sign in / Sign up

Export Citation Format

Share Document