Enchainment of the Coefficient of Structural Quality of Elements in Compression and Bending by Combined Reinforcement of Concrete with Polymer Composite Bars and Dispersed Fiber

Polymer composite reinforcement (PCR) and its use to produce high-quality concrete with the right design and technological and formulation solutions can demonstrate the results obtained with the steel rebars. This article discusses the synergistic effect from the combined reinforcement of concrete with traditional polymer rods and dispersed fiber, which, as a result, lead to an increase in strength and deformation characteristics and an improvement in the performance of compressed and bent structural elements. The synergistic effect of the joint work of polymer rods and dispersed reinforcement is considered in the context of relative indicators (structural quality factor CSQ), showing the relationship between strength characteristics and concrete density. The behavior of glass fiber in a cement matrix and the nature of its deformation during fracture were studied by scanning electron microscopy. It is shown that the use of PCR and dispersed reinforcement makes it possible to increase the strength characteristics of concrete in bending. In quantitative terms, the achieved results demonstrated that the CSQ values of a beam reinforced with a PCR frame with the addition of glass fiber were 3.4 times higher compared to the CSQ of a beam reinforced with steel reinforcement frames. In addition, for a beam reinforced with a PCR frame with no fiber addition, the CSQ values were three times higher.