scholarly journals Low-Velocity Impact Resistance of Al/Gf/PP Laminates with Different Interface Performance

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4416
Author(s):  
Yanyan Lin ◽  
Huaguan Li ◽  
Zhongwei Zhang ◽  
Jie Tao
Keyword(s):  
Energy Absorption ◽  
Impact Energy ◽  
Impact Load ◽  
Rear Surface ◽  
Impact Resistance ◽  
Nitrogen Plasma ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

The weak interface performance between metal and composite (IPMC) makes the composite materials susceptible to impact load. Aluminum/glass fiber/polypropylene (Al/Gf/PP) laminates were manufactured with the aluminum alloy sheets modified by nitrogen plasma surface treatment and the phosphoric acid anodizing method, respectively. FEM models of Al/Gf/PP laminates under low-velocity impact were established in ABAQUS/Explicit based on the generated data including the model I and II interlaminar fracture toughness. Low-velocity impact tests were performed to investigate the impact resistance of Al/Gf/PP laminates including load traces, failure mechanism, and energy absorption. The results showed that delamination was the main failure mode of two kinds of laminates under the impact energy of 20 J and 30 J. When the impact energy was between 40 J and 50 J, there were metal cracks on the rear surface of the plasma pretreated specimens, which possessed higher energy absorption and impact resistance, although the integrity of the laminates could not be preserved. Since the residual compressive stress was generated during the cooling process, the laminates were more susceptible to stretching rather than delamination. For impact energy (60 J) causing the through-the-thickness crack of two kinds of laminates, plasma pretreated specimens exhibited higher SEA values close to 9 Jm2/kg due to better IPMC. Combined with the FEM simulation results, the interface played a role in stress transmission and specimens with better IPMC enabled the laminates to absorb more energy.

Effect of SiO2 Nanoparticles on the Mechanical and Low Velocity Impact Properties of Epoxy/Glass Composites

2016 ◽  
Vol 838 ◽  
pp. 29-35
Author(s):  
Michał Landowski ◽  
Krystyna Imielińska
Keyword(s):  
Flexural Strength ◽  
Energy Absorption ◽  
Impact Energy ◽  
Epoxy Matrix ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Nanoparticle Suspension ◽  
Impact Properties ◽  
Velocity Impact ◽  
The Impact

Flexural strength and low velocity impact properties were investigated in terms of possibile improvements due to epoxy matrix modification by SiO2 nanoparticles (1%, 2%, 3%, 5%, 7%wt.) in glass/epoxy laminates formed using hand lay-up method. The matrix resin was Hexion L285 (DGEBA) with Nanopox A410 - SiO2 (20 nm) nanoparticle suspension in the base epoxy resin (DGEBA) supplied by Evonic. Modification of epoxy matrix by variable concentrations of nanoSiO2 does not offer significant improvements in the flexural strength σg, Young’s modulus E and interlaminar shear strength for 1% 3% and 5% nanoSiO2 and for 7% a slight drop (up to ca. 15-20%) was found. Low energy (1J) impact resistance of nanocomposites represented by peak load in dynamic impact characteristics was not changed for nanocompoosites compared to the unmodified material. However at higher impact energy (3J) nanoparticles appear to slightly improve the impact energy absorption for 3% and 5%. The absence or minor improvements in the mechanical behaviour of nanocomposites is due to the failure mechanisms associated with hand layup fabrication technique: (i.e. rapid crack propagation across the extensive resin pockets and numerous pores and voids) which dominate the nanoparticle-dependent crack energy absorption mechanisms (microvoids formation and deformation).

Low-velocity impact response of wood-strand sandwich panels and their components

Holzforschung ◽  
2018 ◽  
Vol 72 (8) ◽  
pp. 681-689 ◽  
Author(s):  
Mostafa Mohammadabadi ◽  
Vikram Yadama ◽  
LiHong Yao ◽  
Debes Bhattacharyya
Keyword(s):  
Energy Absorption ◽  
Impact Energy ◽  
Failure Modes ◽  
Sandwich Panels ◽  
Low Velocity Impact ◽  
Insulation Material ◽  
Low Velocity ◽  
Velocity Impact ◽  
Section Modulus ◽  
The Impact

AbstractProfiled hollow core sandwich panels (SPs) and their components (outer layers and core) were manufactured with ponderosa and lodgepole pine wood strands to determine the effects of low-velocity impact forces and to observe their energy absorption (EA) capacities and failure modes. An instrumented drop weight impact system was applied and the tests were performed by releasing the impact head from 500 mm for all the specimens while the impactors (IMPs) were equipped with hemispherical and flat head cylindrical heads. SPs with cavities filled with a rigid foam insulation material (SPfoam) were also tested to understand the change in EA behavior and failure mode. Failure modes induced by both IMPs to SPs were found to be splitting, perforating, penetrating, core crushing and debonding between the core and the outer layers. SPfoams absorbed 26% more energy than unfilled SPs. SPfoams with urethane foam suffer less severe failure modes than SPs. SPs in a ridge-loading configuration absorbed more impact energy than those in a valley-loading configuration, especially when impacted by a hemispherical IMP. Based on the results, it is evident that sandwich structure is more efficient than a solid panel concerning impact energy absorption, primarily due to a larger elastic section modulus of the core’s corrugated geometry.

scholarly journals Low Velocity Impact Assessment of a Carbon Fiber Bicycle Wheel

2021 ◽  
Author(s):  
Karmanya Ratra
Keyword(s):  
Carbon Fiber ◽  
Energy Absorption ◽  
Impact Energy ◽  
Damage Evolution ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Test Protocol ◽  
Velocity Impact ◽  
The Impact

Carbon fiber bicycle wheels were tested under low velocity impact to monitor the damage evolution of the impact event. A wheel model designed by KQS Inc. (industrial partner) with eight different configurations, including spoke tension, number of spokes, and location of impact on the rim were investigated. IR thermography combined with PCA was used to monitor the damage during impact. Results showed that wheels in line with spokes had 16% higher impact energy absorption compared to those impacted in between spokes on average (58.9 J vs 70.2 J). The 20 spoked wheels had a slightly higher (6%) impact energy absorption than the 24 spoked wheels. The added stiffness due to the extra spokes reduced the impact energy absorption of rim. Wheels with higher spoke tension also had slightly improved impact energy absorption (4%). The test protocol established in this study provides a good understanding of the wheel’s impact damage evolution.

scholarly journals Impact Response and Damage Characteristics of Carbon Fiber Reinforced Aluminum Laminates Under Low Velocity Impact Loading

2020 ◽  
Vol 9 (4) ◽  
pp. 1831-1837
Keyword(s):  
Impact Energy ◽  
Impact Load ◽  
Three Dimensional ◽  
Low Velocity Impact ◽  
Fe Model ◽  
Low Velocity ◽  
Fiber Layer ◽  
Cross Sectional ◽  
Velocity Impact ◽  
The Impact

CARALL hybrid material has been extensively used in the aircraft structure due to their competitive impact strength. Low velocity impact test is utilized to evaluate the impact and damage properties for such material. It is also employed to observe complex damage mechanisms. A numerical modelling is an alternative way for impact assessment. This paper investigates the impact and damage properties under low velocity impact using numerical modeling and experimental work. A three-dimensional (3D) finite element (FE) model was devolved and validated with two studies from the literature. This model was meshed with solid elements. It was subjected to 2.4 m/s impact velocity and to 10 J impact energy. Absorbed energy, penetration, impact load and damage morphology were obtained. The impact energy was efficiently absorbed by the material. Both aluminum alloy layers underwent plastic deformation whereas the fiber layer failed. A macroscopic cross-sectional morphology was presented using the FE model. An agreement between the numerical and the experiment results were achieved and discussed.

Effect of Graphene Platelets/Fiber on Plastics Nanocomposites under Low-Velocity Impact Response

2016 ◽  
Vol 852 ◽  
pp. 23-28
Author(s):  
S. Subha ◽  
Battu Sai Krishna ◽  
Dalbir Singh ◽  
R. Gokulnath
Keyword(s):  
Energy Absorption ◽  
Impact Energy ◽  
Laminate Plate ◽  
Absorption Capacity ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Energy Absorption Capacity ◽  
Velocity Impact ◽  
The Impact

In this study, an attempt has made to explore the low-velocity impact response of a Carbon/epoxy laminate (CFRP) and E-Glass/epoxy laminates (GFRP). The composite was reinforced with Graphene Nanoplatelets (GnPs) and impact energy absorption capacity was studied. The plain GFRP and plain CFRP were served as a baseline for comparison. These composite laminate plates were fabricated using hand layup technique. The tests were carried out on the laminate plate as per ASTM D5628 FD. Impact tests were performed using a specially designed vertical drop-weight testing machine with an impactor mass of 1.926 kg. The result shows that laminate plate reinforced with GnPs reinforcement enhances the impact energy absorption capacity of the composites almost 4.5 % in the case Carbon/epoxy laminate and 3.5 % in the case of and E-glass/epoxy laminate. The enhanced impact resistance could be attributed to increased interlaminar fracture toughness of the fibres.

The influence of fibre orientation in aluminium–carbon laminates on low-velocity impact resistance

2017 ◽  
Vol 52 (8) ◽  
pp. 1005-1016 ◽  
Author(s):  
Patryk Jakubczak ◽  
Jarosław Bienias ◽  
Barbara Surowska
Keyword(s):  
Energy Absorption ◽  
Fibre Orientation ◽  
Impact Resistance ◽  
Bending Stiffness ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Area ◽  
Fibre Metal ◽  
The Impact

The objective of this study was to assess the influence of fibre orientation in hybrid fibre metal laminates based on aluminium and carbon fibres on the impact of low-velocity impact. The analysis was conducted on the basis of fibre metal laminate impact resistance criteria, including impact force, energy absorption, bending stiffness, damage area and failure. To assess the resistance of various aluminium–carbon laminates, qualitative and quantitative evaluation criteria were employed, including the shape of the force–time curve, characteristic impact forces, energy absorption, bending stiffness, damage area and external failure analysis. Among others, authors concluded that no explicit influence of the composite layer fibre orientation on the shape and value of characteristic forces was observed. It was found that the fibre orientation and the changing number of interfaces of low durability show no explicit influence on the size and shape of delaminations.

Numerical and experimental investigations on sandwich panels made with eco-friendly components under low-velocity impact

2021 ◽  
pp. 109963622110204
Author(s):  
Pablo Oliveira ◽  
Sebastian Kilchert ◽  
Michael May ◽  
Tulio Panzera ◽  
Fabrizio Scarpa ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Lower Energy ◽  
Shear Failure ◽  
Epoxy Polymer ◽  
Impact Load ◽  
Low Velocity Impact ◽  
Experimental Investigations ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

A low-velocity impact characterisation of a sustainable sandwich panel based on upcycled bottle caps as circular honeycomb is conducted. The recycled core aims to develop an alternative route of reusing waste bottle caps disposed in landfills. Ecological alternatives to skin (recycled PET foil) and adhesive (bio-polyurethane) are also compared with classic components (aluminium skin and epoxy polymer). A low-cost reinforcement (cement particles) is also proposed to enhance the mechanical strength of the panel. The samples are tested at several levels of impact energy, according to the type of skin, to observe their effect on mechanical behaviour. Metal skins achieve higher impact loads and energy absorption compared to PET foil. The bio-adhesive leads to a similar or enhanced maximum impact load and energy absorption compared to the epoxy adhesive. Specific properties highlight the promising performance of the bio-based adhesive with aluminium skins, reaching increments of up to 378%. The cement increases the maximum load and reduces the duration of the impact event, leading to lower energy absorption. The unreinforced epoxy polymer shows a visible adhesive peeling off from aluminium skin, while particle inclusions lead to reduced overall delamination. Biopolymer exhibits marginal adhesive debonding and stable deformation, revealing a progressive failure. In general, PET samples show core shear failure due to rupture of the skin. Crack propagation in PET samples made with biopolymer adhesive is reduced at lower energy levels. The results evidence the promising application of bottle caps in a more sustainable honeycomb core to build eco-friendly structures.

scholarly journals Low Velocity Impact Assessment of a Carbon Fiber Bicycle Wheel

2021 ◽  
Author(s):  
Karmanya Ratra
Keyword(s):  
Carbon Fiber ◽  
Energy Absorption ◽  
Impact Energy ◽  
Damage Evolution ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Test Protocol ◽  
Velocity Impact ◽  
The Impact

Carbon fiber bicycle wheels were tested under low velocity impact to monitor the damage evolution of the impact event. A wheel model designed by KQS Inc. (industrial partner) with eight different configurations, including spoke tension, number of spokes, and location of impact on the rim were investigated. IR thermography combined with PCA was used to monitor the damage during impact. Results showed that wheels in line with spokes had 16% higher impact energy absorption compared to those impacted in between spokes on average (58.9 J vs 70.2 J). The 20 spoked wheels had a slightly higher (6%) impact energy absorption than the 24 spoked wheels. The added stiffness due to the extra spokes reduced the impact energy absorption of rim. Wheels with higher spoke tension also had slightly improved impact energy absorption (4%). The test protocol established in this study provides a good understanding of the wheel’s impact damage evolution.

scholarly journals Structural Damage Characteristics of a Layer-to-Layer 3-D Angle-Interlock Woven Composite Subjected to Drop-Weight Impact

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Qian Ma ◽  
Ke Wang ◽  
Shudong Wang ◽  
Yiwei Ouyang ◽  
Zhiqiang Lin ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Impact Energy ◽  
Structural Damage ◽  
Low Velocity Impact ◽  
Woven Composite ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Characteristics ◽  
Drop Weight ◽  
The Impact

AbstractThe most attractive structural feature of the three-dimensional (3D) angle-interlock woven structure is that the straight weft yarns are bundled by the undulated warp yarns, which induces the overall good structural stability and a stable fabric structure. Thus the 3-D angle-interlock woven composite (3DAWC) prepared by the vacuum-assisted resin transfer molding (VARTM) curing process has excellent mechanical properties by using the fabric and epoxy resin as the reinforcement and matrix, respectively. The low-velocity impact damage properties of the composites under different drop-weight energies (70, 80, and 100 J) were tested experimentally. The load–displacement curves, energy–time curves, and the ultimate failure modes were obtained to analyze the performance of resistance to low-velocity impact, as well as the impact energy absorption effect and failure mechanism, especially the structural damage characteristics of the 3DAWC subjected to the low-velocity impact of drop weight. By analyzing the obtained experimental results, it is found that the fabric reinforcement is the primary energy absorption component and the impact energy mainly propagates along the longitudinal direction of the yarns, especially the weft yarn system, which is arranged in a straight way. In addition, as the impact energy increases, the energy absorbed and dissipated by the composite increases simultaneously. This phenomenon is manifested in the severity of deformation and damage of the material, i.e., the amount of deformation and size of the damaged area.

Response and failure modes of biaxial warp-knitted flexible composite subject to low-velocity impact

2021 ◽  
pp. 152808372110154
Author(s):  
Ziyu Zhao ◽  
Tianming Liu ◽  
Pibo Ma
Keyword(s):  
Impact Energy ◽  
Linear Density ◽  
Failure Modes ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Minor Effect ◽  
Low Velocity ◽  
Velocity Impact ◽  
Flexible Composites ◽  
The Impact

In this paper, biaxial warp-knitted fabrics were produced with different high tenacity polyester linear density and inserted yarns density. The low-velocity impact property of flexible composites made of polyurethane as matrix and biaxial warp-knitted fabric as reinforcement has been investigated. The effect of impactor shape and initial impact energy on the impact response of flexible composite is tested. The results show that the initial impact energy have minor effect on the impact response of the biaxial warp-knitted flexible composites. The impact resistance of flexible composite specimen increases with the increase of high tenacity polyester linear density and inserted yarns density. The damage morphology of flexible composite materials is completely different under different impactor shapes. The findings have theoretical and practical significance for the applications of biaxial warp-knitted flexible composite.

Sign in / Sign up

Export Citation Format

Share Document