scholarly journals Evaluation of a Microwave Emissivity Module for Snow Covered Area with CMEM in the ECMWF Integrated Forecasting System

2020 ◽  
Vol 12 (18) ◽  
pp. 2946
Author(s):  
Yoichi Hirahara ◽  
Patricia de Rosnay ◽  
Gabriele Arduini
Keyword(s):  
Radiative Transfer ◽  
Weather Prediction ◽  
Low Frequency ◽  
Microwave Emission ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Emission Model ◽  
Snow Covered Area ◽  
Covered Area ◽  
Forecasting System

The Community Microwave Emission Modelling platform (CMEM) has been developed by the European Centre for Medium-Range Weather Forecasts (ECMWF) as the forward operator radiative transfer model for low frequency passive microwave brightness temperatures (TB). It is used at ECMWF for L-band TB monitoring over snow free areas. In this paper, upgrades to CMEM are presented in order to explore forward modelling in snow-covered areas for coupled land-atmosphere numerical weather prediction systems. The upgrades enable to use CMEM on an extended range of frequencies and the Helsinki University of Technology multi-layer snow emission model is implemented. Offline CMEM experiments are evaluated against AMSR2 (Advanced Microwave Scanning Radiometer 2) observations showing that simulated TB is improved when using a multi-layer snow scheme, compared to a single-layer scheme. The improvements mainly result from a better representation of snow characteristics in the multi-layer snowpack model. CMEM is also evaluated in the Integrated Forecasting System and coupled to RTTOV (Radiative Transfer for TOVS). The numerical results show improved simulated TB at low frequency V polarization over snow-covered area compared to a configuration using emissivity atlas. Degradations at frequencies higher than 20 GHz indicate that further improvements are required in the emissivity and snowpack properties modelling.

scholarly journals Modelling the L-Band Snow-Covered Surface Emission in a Winter Canadian Prairie Environment

2018 ◽  
Vol 10 (9) ◽  
pp. 1451 ◽  
Author(s):  
Alexandre Roy ◽  
Marion Leduc-Leballeur ◽  
Ghislain Picard ◽  
Alain Royer ◽  
Peter Toose ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Brightness Temperature ◽  
Frozen Soil ◽  
Microwave Emission ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Emission Model ◽  
Canadian Prairie ◽  
Seasonal Snow ◽  
L Band

Detailed angular ground-based L-band brightness temperature (TB) measurements over snow covered frozen soil in a prairie environment were used to parameterize and evaluate an electromagnetic model, the Wave Approach for LOw-frequency MIcrowave emission in Snow (WALOMIS), for seasonal snow. WALOMIS, initially developed for Antarctic applications, was extended with a soil interface model. A Gaussian noise on snow layer thickness was implemented to account for natural variability and thus improve the TB simulations compared to observations. The model performance was compared with two radiative transfer models, the Dense Media Radiative Transfer-Multi Layer incoherent model (DMRT-ML) and a version of the Microwave Emission Model for Layered Snowpacks (MEMLS) adapted specifically for use at L-band in the original one-layer configuration (LS-MEMLS-1L). Angular radiometer measurements (30°, 40°, 50°, and 60°) were acquired at six snow pits. The root-mean-square error (RMSE) between simulated and measured TB at vertical and horizontal polarizations were similar for the three models, with overall RMSE between 7.2 and 10.5 K. However, WALOMIS and DMRT-ML were able to better reproduce the observed TB at higher incidence angles (50° and 60°) and at horizontal polarization. The similar results obtained between WALOMIS and DMRT-ML suggests that the interference phenomena are weak in the case of shallow seasonal snow despite the presence of visible layers with thicknesses smaller than the wavelength, and the radiative transfer model can thus be used to compute L-band brightness temperature.

scholarly journals Effects of Various parameters on Radiative Transfer Theory Based Microwave Emission Model

2017 ◽  
Vol 27 (1) ◽  
pp. 95-107
Author(s):  
Mazen E. Assiri Mazen E. Assiri
Keyword(s):  
Radiative Transfer ◽  
Brightness Temperature ◽  
Microwave Radiometer ◽  
Microwave Emission ◽  
Radiative Transfer Model ◽  
Stem Volume ◽  
Transfer Model ◽  
Emission Model ◽  
Radiative Transfer Theory ◽  
Transfer Theory

This paper outlines research that is currently being carried out to model the interaction of electromagnetic radiation with earth and atmosphere. Among many others, passive microwave (PM) imagery represents a useful source of data for mapping Earth features. Since, signal of a microwave radiometer is composed of surface and atmospheric contributions, for proper interpretation of the data these effects should be quantified. This research presents analysis of radiative transfer model contributors, which include; the ground based parameters, forest area, water area, and meteorological parameters. The principal objective of this study is to analyze the degree to which brightness temperature can be affected by various earth and atmospheric features. A sensitivity analysis is performed to test the contributing effects of various parameters in radiative transfer theory based microwave emission model. The results of the study show that soil temperature and forest stem volume are the main contributing parameters in estimating brightness temperature values. The results further show that both the earthly located features and atmospheric parameters are important factors that must be taken into account in the development and application of radiative transfer theory based models

scholarly journals Comparison of measured brightness temperatures from SMOS with modelled ones from ORCHIDEE and H-TESSEL over the Iberian Peninsula

2015 ◽  
Vol 12 (12) ◽  
pp. 13019-13067
Author(s):  
A. Barella-Ortiz ◽  
J. Polcher ◽  
P. de Rosnay ◽  
M. Piles ◽  
E. Gelati
Keyword(s):  
Soil Moisture ◽  
Radiative Transfer ◽  
Iberian Peninsula ◽  
Land Surface ◽  
Function Analysis ◽  
Microwave Emission ◽  
Radiative Transfer Model ◽  
Retrieval Algorithm ◽  
Transfer Model ◽  
Brightness Temperatures

Abstract. L-Band radiometry is considered to be one of the most suitable techniques to estimate surface soil moisture by means of remote sensing. Brightness temperatures are key in this process, as they are the main input in the retrieval algorithm. The work exposed compares brightness temperatures measured by the Soil Moisture and Ocean Salinity (SMOS) mission to two different sets of modelled ones, over the Iberian Peninsula from 2010 to 2012. The latter were estimated using a radiative transfer model and state variables from two land surface models: (i) ORganising Carbon and Hydrology In Dynamic EcosystEms (ORCHIDEE) and (ii) Hydrology – Tiled ECMWF Scheme for Surface Exchanges over Land (H-TESSEL). The radiative transfer model used is the Community Microwave Emission Model (CMEM). A good agreement in the temporal evolution of measured and modelled brightness temperatures is observed. However, their spatial structures are not consistent between them. An Empirical Orthogonal Function analysis of the brightness temperature's error identifies a dominant structure over the South-West of the Iberian Peninsula which evolves during the year and is maximum in Fall and Winter. Hypotheses concerning forcing induced biases and assumptions made in the radiative transfer model are analysed to explain this inconsistency, but no candidate is found to be responsible for it at the moment. Further hypotheses are proposed at the end of the paper.

Evaluation of shortwave radiation fluxes in the multi-layer SPARTACUS-Urban scheme using DART

2021 ◽  
Author(s):  
Megan Stretton ◽  
William Morrison ◽  
Robin Hogan ◽  
Sue Grimmond
Keyword(s):  
Radiative Transfer ◽  
Urban Form ◽  
Climate Models ◽  
Weather Prediction ◽  
Computational Cost ◽  
Three Dimensional ◽  
Shortwave Radiation ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Urban Structure

<p>The heterogenous structure of cities impacts radiative exchanges (e.g. albedo and heat storage). Numerical weather prediction (NWP) models often characterise the urban structure with an infinite street canyon – but this does not capture the three-dimensional urban form. SPARTACUS-Urban (SU) - a fast, multi-layer radiative transfer model designed for NWP - is evaluated using the explicit Discrete Anisotropic Radiative Transfer (DART) model for shortwave fluxes across several model domains – from a regular array of cubes to real cities .</p><p>SU agrees with DART (errors < 5.5% for all variables) when the SU assumptions of building distribution are fulfilled (e.g. randomly distribution). For real-world areas with pitched roofs, SU underestimates the albedo (< 10%) and shortwave transmission to the surface (< 15%), and overestimates wall-plus-roof absorption (9-27%), with errors increasing with solar zenith angle. SU should be beneficial to weather and climate models, as it allows more realistic urban form (cf. most schemes) without large increases in computational cost.</p>

scholarly journals Evaluation of MWHS-2 Using a Co-located Ground-Based Radar Network for Improved Model Assimilation

2019 ◽  
Vol 11 (20) ◽  
pp. 2338 ◽  
Author(s):  
Liu ◽  
Chu ◽  
Yin ◽  
Liu
Keyword(s):  
Radiative Transfer ◽  
Brightness Temperature ◽  
Weather Prediction ◽  
Order Relation ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Radar Network ◽  
Intense Precipitation ◽  
Standard Deviations ◽  
Light Precipitation

Accurate precipitation detection is one of the most important factors in satellite data assimilation, due to the large uncertainties associated with precipitation properties in radiative transfer models and numerical weather prediction (NWP) models. In this paper, a method to achieve remote sensing of precipitation and classify its intensity over land using a co-located ground-based radar network is described. This method is intended to characterize the O−B biases for the microwave humidity sounder -2 (MWHS-2) under four categories of precipitation: precipitation-free (0–5 dBZ), light precipitation (5–20 dBZ), moderate precipitation (20–35 dBZ), and intense precipitation (>35 dBZ). Additionally, O represents the observed brightness temperature (TB) of the satellite and B is the simulated TB from the model background field using the radiative transfer model. Thresholds for the brightness temperature differences between channels, as well as the order relation between the differences, exhibited a good estimation of precipitation. It is demonstrated that differences between observations and simulations were predominantly due to the cases in which radar reflectivity was above 15 dBZ. For most channels, the biases and standard deviations of O−B increased with precipitation intensity. Specifically, it is noted that for channel 11 (183.31 ± 1 GHz), the standard deviations of O−B under moderate and intense precipitation were even smaller than those under light precipitation and precipitation-free conditions. Likewise, abnormal results can also be seen for channel 4 (118.75 ± 0.3 GHz).

scholarly journals RTTOV-gb – Adapting the fast radiative transfer model RTTOV for the assimilation of ground-based microwave radiometer observations

2016 ◽  
Author(s):  
Francesco De Angelis ◽  
Domenico Cimini ◽  
James Hocking ◽  
Pauline Martinet ◽  
Stefan Kneifel
Keyword(s):  
Radiative Transfer ◽  
Liquid Water ◽  
Weather Prediction ◽  
Microwave Radiometer ◽  
Software Tool ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
60 Ghz ◽  
Variational Assimilation ◽  
Temperature And Humidity

Abstract. Ground-based microwave radiometers (MWR) offer a new capability to provide continuous observations of the atmospheric thermodynamic state in the planetary boundary layer. Thus, they are potential candidates to supplement radiosonde network and satellite data to improve numerical weather prediction (NWP) models through a variational assimilation of their data. However in order to assimilate MWR observations a fast radiative transfer model is required and such a model is not currently available. This is necessary for going from the model state vector space to the observation space at every observation point. The fast radiative transfer model RTTOV is well accepted in the NWP community, though it was developed to simulate satellite observations only. In this work, the RTTOV code has been modified to allow for simulations of ground-based upward looking microwave sensors. In addition, the Tangent Linear, Adjoint, and K-modules of RTTOV have been adapted to provide Jacobians (i.e. the sensitivity of observations to the atmospheric thermodynamical state) for ground-based geometry. These modules are necessary for the fast minimization of the cost function in a variational assimilation scheme. The proposed ground-based version of RTTOV, called RTTOV-gb, has been validated against accurate and less time-efficient line-by-line radiative transfer models. In the frequency range commonly used for temperature and humidity profiling (22–60 GHz), root-mean-square brightness temperature differences are smaller than typical MWR uncertainties (~ 0.5 K) at all channels used in this analysis. Brightness temperatures (TB) computed with RTTOV-gb from radiosonde profiles have been compared with nearly simultaneous and colocated ground-based MWR observations. Differences between simulated and measured TB are below 0.5 K for all channels except for the water vapor band, where most of the uncertainty comes from instrumental errors. The Jacobians calculated with the K-module of RTTOV-gb have been compared with those calculated with the brute force technique and those from the line-by-line model ARTS. Jacobians are found to be almost identical, except for liquid water content Jacobians for which a 10 % difference between ARTS and RTTOV-gb at transparent channels around 450 hPa is attributed to differences in liquid water absorption models. Finally, RTTOV-gb has been applied as the forward model operator within a 1-Dimensional Variational (1D-Var) software tool in an Observing-System Simulation Experiment (OSSE). For both temperature and humidity profiles, the 1D-Var with RTTOV-gb improves the retrievals with respect to NWP model in the first few kilometers from the ground.

scholarly journals A fast visible-wavelength 3D radiative transfer model for numerical weather prediction visualization and forward modeling

2020 ◽  
Vol 13 (6) ◽  
pp. 3235-3261
Author(s):  
Steven Albers ◽  
Stephen M. Saleeby ◽  
Sonia Kreidenweis ◽  
Qijing Bian ◽  
Peng Xian ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Radiative Transfer ◽  
Numerical Weather Prediction ◽  
Land Surface ◽  
Weather Prediction ◽  
Lower Boundary ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Numerical Weather ◽  
Visible Wavelength

Abstract. Solar radiation is the ultimate source of energy flowing through the atmosphere; it fuels all atmospheric motions. The visible-wavelength range of solar radiation represents a significant contribution to the earth's energy budget, and visible light is a vital indicator for the composition and thermodynamic processes of the atmosphere from the smallest weather scales to the largest climate scales. The accurate and fast description of light propagation in the atmosphere and its lower-boundary environment is therefore of critical importance for the simulation and prediction of weather and climate. Simulated Weather Imagery (SWIm) is a new, fast, and physically based visible-wavelength three-dimensional radiative transfer model. Given the location and intensity of the sources of light (natural or artificial) and the composition (e.g., clear or turbid air with aerosols, liquid or ice clouds, precipitating rain, snow, and ice hydrometeors) of the atmosphere, it describes the propagation of light and produces visually and physically realistic hemispheric or 360∘ spherical panoramic color images of the atmosphere and the underlying terrain from any specified vantage point either on or above the earth's surface. Applications of SWIm include the visualization of atmospheric and land surface conditions simulated or forecast by numerical weather or climate analysis and prediction systems for either scientific or lay audiences. Simulated SWIm imagery can also be generated for and compared with observed camera images to (i) assess the fidelity and (ii) improve the performance of numerical atmospheric and land surface models. Through the use of the latter in a data assimilation scheme, it can also (iii) improve the estimate of the state of atmospheric and land surface initial conditions for situational awareness and numerical weather prediction forecast initialization purposes.

scholarly journals Clear-Sky Mask for the Advanced Clear-Sky Processor for Oceans

2010 ◽  
Vol 27 (10) ◽  
pp. 1609-1623 ◽  
Author(s):  
B. Petrenko ◽  
A. Ignatov ◽  
Y. Kihai ◽  
A. Heidinger
Keyword(s):  
High Resolution ◽  
Radiative Transfer ◽  
Weather Prediction ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Clear Sky ◽  
Brightness Temperatures ◽  
Spatial Uniformity ◽  
Uniformity Test ◽  
Cross Platform

Abstract The Advanced Clear Sky Processor for Oceans (ACSPO) generates clear-sky products, such as SST, clear-sky radiances, and aerosol, from Advanced Very High Resolution Radiometer (AVHRR)-like measurements. The ACSPO clear-sky mask (ACSM) identifies clear-sky pixels within the ACSPO products. This paper describes the ACSM structure and compares the performances of ACSM and its predecessor, Clouds from AVHRR Extended Algorithm (CLAVRx). ACSM essentially employs online clear-sky radiative transfer simulations enabled within ACSPO with the Community Radiative Transfer Model (CRTM) in conjunction with numerical weather prediction atmospheric [Global Forecast System (GFS)] and SST [Reynolds daily high-resolution blended SST (DSST)] fields. The baseline ACSM tests verify the accuracy of fitting observed brightness temperatures with CRTM, check retrieved SST for consistency with Reynolds SST, and identify ambient cloudiness at the boundaries of cloudy systems. Residual cloud effects are screened out with several tests, adopted from CLAVRx, and with the SST spatial uniformity test designed to minimize misclassification of sharp SST gradients as clouds. Cross-platform and temporal consistencies of retrieved SSTs are maintained by accounting for SST and brightness temperature biases, estimated within ACSPO online and independently from ACSM. The performance of ACSM is characterized in terms of statistics of deviations of retrieved SST from the DSST. ACSM increases the amount of “clear” pixels by 30% to 40% and improves statistics of retrieved SST compared with CLAVRx. ACSM is also shown to be capable of producing satisfactory statistics of SST anomalies if the reference SST field for the exact date of observations is unavailable at the time of processing.

scholarly journals Mesoscale Simulations of Australian Direct Normal Irradiance, Featuring an Extreme Dust Event

2018 ◽  
Vol 57 (3) ◽  
pp. 493-515 ◽  
Author(s):  
S. K. Mukkavilli ◽  
A. A. Prasad ◽  
R. A. Taylor ◽  
A. Troccoli ◽  
M. J. Kay
Keyword(s):  
Radiative Transfer ◽  
Climate Models ◽  
Global Climate ◽  
Weather Prediction ◽  
Wrf Model ◽  
Global Climate Models ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Dust Event ◽  
Direct Normal Irradiance

AbstractDirect normal irradiance (DNI) is the main input for concentrating solar power (CSP) technologies—an important component in future energy scenarios. DNI forecast accuracy is sensitive to radiative transfer schemes (RTSs) and microphysics in numerical weather prediction (NWP) models. Additionally, NWP models have large regional aerosol uncertainties. Dust aerosols can significantly attenuate DNI in extreme cases, with marked consequences for applications such as CSP. To date, studies have not compared the skill of different physical parameterization schemes for predicting hourly DNI under varying aerosol conditions over Australia. The authors address this gap by aiming to provide the first Weather and Forecasting (WRF) Model DNI benchmarks for Australia as baselines for assessing future aerosol-assimilated models. Annual and day-ahead simulations against ground measurements at selected sites focusing on an extreme dust event are run. Model biases are assessed for five shortwave RTSs at 30- and 10-km grid resolutions, along with the Thompson aerosol-aware scheme in three different microphysics configurations: no aerosols, fixed optical properties, and monthly climatologies. From the annual simulation, the best schemes were the Rapid Radiative Transfer Model for global climate models (RRTMG), followed by the new Goddard and Dudhia schemes, despite the relative simplicity of the latter. These top three RTSs all had 1.4–70.8 W m−2 lower mean absolute error than persistence. RRTMG with monthly aerosol climatologies was the best combination. The extreme dust event had large DNI mean bias overpredictions (up to 4.6 times), compared to background aerosol results. Dust storm–aware DNI forecasts could benefit from RRTMG with high-resolution aerosol inputs.

scholarly journals Three-dimensional effects in polarization signatures as observed from precipitating clouds by low frequency ground-based microwave radiometers

2006 ◽  
Vol 6 (3) ◽  
pp. 5427-5456
Author(s):  
A. Battaglia ◽  
C. Simmer ◽  
H. Czekala
Keyword(s):  
Radiative Transfer ◽  
Monte Carlo Model ◽  
Three Dimensional ◽  
Low Frequency ◽  
Radiative Transfer Model ◽  
Observation Angle ◽  
Transfer Model ◽  
One Dimensional ◽  
Dimensional Effects ◽  
The Impact

Abstract. Consistent negative polarization differences (i.e. differences between the vertical and the horizontal brightness temperature) are observed when looking at precipitating systems by ground-based radiometers at slant angles. These signatures can be partially explained by one-dimensional radiative transfer computations that include oriented non-spherical raindrops. However some cases are characterized by polarization values that exceed differences expected from one-dimensional radiative transfer. A three-dimensional fully polarized Monte Carlo model has been used to evaluate the impact of the horizontal finiteness of rain shafts with different rain rates at 10, 19, and 30 GHz. The results show that because of the reduced slant optical thickness in finite clouds, the polarization signal can strongly differ from its one-dimensional counterpart. At the higher frequencies and when the radiometer is positioned underneath the cloud, significantly higher negative values for the polarization are found which are also consistent with some observations. When the observation point is located outside of the precipitating cloud, typical polarization patterns (with troughs and peaks) as a function of the observation angle are predicted. An approximate 1-D slant path radiative transfer model is considered as well and results are compared with the full 3-D simulations to investigate whether or not three-dimensional effects can be explained by geometry effects alone. The study has strong relevance for low-frequency passive microwave polarimetric studies.

Sign in / Sign up

Export Citation Format

Share Document