scholarly journals Crop Yield Prediction Using Multitemporal UAV Data and Spatio-Temporal Deep Learning Models

2020 ◽  
Vol 12 (23) ◽  
pp. 4000
Author(s):  
Petteri Nevavuori ◽  
Nathaniel Narra ◽  
Petri Linna ◽  
Tarmo Lipping
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Crop Yield ◽  
Time Series Data ◽  
Weather Data ◽  
Series Data ◽  
Percentage Error ◽  
Time Series Modelling ◽  
Spatio Temporal ◽  
3D Cnn

Unmanned aerial vehicle (UAV) based remote sensing is gaining momentum worldwide in a variety of agricultural and environmental monitoring and modelling applications. At the same time, the increasing availability of yield monitoring devices in harvesters enables input-target mapping of in-season RGB and crop yield data in a resolution otherwise unattainable by openly availabe satellite sensor systems. Using time series UAV RGB and weather data collected from nine crop fields in Pori, Finland, we evaluated the feasibility of spatio-temporal deep learning architectures in crop yield time series modelling and prediction with RGB time series data. Using Convolutional Neural Networks (CNN) and Long-Short Term Memory (LSTM) networks as spatial and temporal base architectures, we developed and trained CNN-LSTM, convolutional LSTM and 3D-CNN architectures with full 15 week image frame sequences from the whole growing season of 2018. The best performing architecture, the 3D-CNN, was then evaluated with several shorter frame sequence configurations from the beginning of the season. With 3D-CNN, we were able to achieve 218.9 kg/ha mean absolute error (MAE) and 5.51% mean absolute percentage error (MAPE) performance with full length sequences. The best shorter length sequence performance with the same model was 292.8 kg/ha MAE and 7.17% MAPE with four weekly frames from the beginning of the season.

scholarly journals Missing Value Imputation of Time-Series Air-Quality Data via Deep Neural Networks

2021 ◽  
Vol 18 (22) ◽  
pp. 12213
Author(s):  
Taesung Kim ◽  
Jinhee Kim ◽  
Wonho Yang ◽  
Hunjoo Lee ◽  
Jaegul Choo
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Air Quality ◽  
Time Series Data ◽  
Quality Data ◽  
Series Data ◽  
Missing Value ◽  
Missing Value Imputation ◽  
Spatio Temporal ◽  
Air Quality Data

To prevent severe air pollution, it is important to analyze time-series air quality data, but this is often challenging as the time-series data is usually partially missing, especially when it is collected from multiple locations simultaneously. To solve this problem, various deep-learning-based missing value imputation models have been proposed. However, often they are barely interpretable, which makes it difficult to analyze the imputed data. Thus, we propose a novel deep learning-based imputation model that achieves high interpretability as well as shows great performance in missing value imputation for spatio-temporal data. We verify the effectiveness of our method through quantitative and qualitative results on a publicly available air-quality dataset.

scholarly journals Load forecasting of refrigerated display cabinet based on CEEMD–IPSO–LSTM combined model

Open Physics ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 360-374
Author(s):  
Yuan Pei ◽  
Lei Zhenglin ◽  
Zeng Qinghui ◽  
Wu Yixiao ◽  
Lu Yanli ◽  
...  
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Time Series Data ◽  
Load Forecasting ◽  
Series Data ◽  
Forecasting Model ◽  
Combined Model ◽  
Forecasting Accuracy ◽  
Forecasting Method ◽  
Consumption Reduction

Abstract The load of the showcase is a nonlinear and unstable time series data, and the traditional forecasting method is not applicable. Deep learning algorithms are introduced to predict the load of the showcase. Based on the CEEMD–IPSO–LSTM combination algorithm, this paper builds a refrigerated display cabinet load forecasting model. Compared with the forecast results of other models, it finally proves that the CEEMD–IPSO–LSTM model has the highest load forecasting accuracy, and the model’s determination coefficient is 0.9105, which is obviously excellent. Compared with other models, the model constructed in this paper can predict the load of showcases, which can provide a reference for energy saving and consumption reduction of display cabinet.

scholarly journals Bernoulli Time Series Modelling with Application to Accommodation Tourism Demand

2021 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Miguel Ángel Ruiz Reina
Keyword(s):  
Time Series ◽  
Time Series Data ◽  
Prognostic Models ◽  
Series Data ◽  
Economic Agents ◽  
Time Series Modelling ◽  
Simulation And Training ◽  
Uncertainty Method ◽  
And Training ◽  
Hotel Accommodation

In this research, a new uncertainty method has been developed and applied to forecasting the hotel accommodation market. The simulation and training of Time Series data are from January 2001 to December 2018 in the Spanish case. The Log-log BeTSUF method estimated by GMM-HAC-Newey-West is considered as a contribution for measuring uncertainty vs. other prognostic models in the literature. The results of our model present better indicators of the RMSE and Ratio Theil’s for the predictive evaluation period of twelve months. Furthermore, the straightforward interpretation of the model and the high descriptive capacity of the model allow economic agents to make efficient decisions.

scholarly journals Distance variable improvement of time-series big data stream evaluation

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Ari Wibisono ◽  
Petrus Mursanto ◽  
Jihan Adibah ◽  
Wendy D. W. T. Bayu ◽  
May Iffah Rizki ◽  
...  
Keyword(s):  
Time Series ◽  
Standard Deviation ◽  
Standard Method ◽  
Time Series Data ◽  
Series Data ◽  
Percentage Error ◽  
Traffic Demand ◽  
Incremental Model ◽  
Chernoff Bound ◽  
The Mean

Abstract Real-time information mining of a big dataset consisting of time series data is a very challenging task. For this purpose, we propose using the mean distance and the standard deviation to enhance the accuracy of the existing fast incremental model tree with the drift detection (FIMT-DD) algorithm. The standard FIMT-DD algorithm uses the Hoeffding bound as its splitting criterion. We propose the further use of the mean distance and standard deviation, which are used to split a tree more accurately than the standard method. We verify our proposed method using the large Traffic Demand Dataset, which consists of 4,000,000 instances; Tennet’s big wind power plant dataset, which consists of 435,268 instances; and a road weather dataset, which consists of 30,000,000 instances. The results show that our proposed FIMT-DD algorithm improves the accuracy compared to the standard method and Chernoff bound approach. The measured errors demonstrate that our approach results in a lower Mean Absolute Percentage Error (MAPE) in every stage of learning by approximately 2.49% compared with the Chernoff Bound method and 19.65% compared with the standard method.

scholarly journals Deep Learning for Anomaly Detection in Time-Series Data: Review, Analysis, and Guidelines

IEEE Access ◽  
2021 ◽  
Vol 9 ◽  
pp. 120043-120065
Author(s):  
Kukjin Choi ◽  
Jihun Yi ◽  
Changhwa Park ◽  
Sungroh Yoon
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Anomaly Detection ◽  
Time Series Data ◽  
Series Data ◽  
Review Analysis

scholarly journals Implementation of IoT Framework with Data Analysis Using Deep Learning Methods for Occupancy Prediction in a Building

2021 ◽  
Vol 13 (3) ◽  
pp. 67
Author(s):  
Eric Hitimana ◽  
Gaurav Bajpai ◽  
Richard Musabe ◽  
Louis Sibomana ◽  
Jayavel Kayalvizhi
Keyword(s):  
Machine Learning ◽  
Time Series ◽  
Deep Learning ◽  
Time Series Data ◽  
Multivariate Time Series ◽  
Machine Learning Algorithms ◽  
Series Data ◽  
Support Vector ◽  
Human Beings ◽  
Feed Forward Network

Many countries worldwide face challenges in controlling building incidence prevention measures for fire disasters. The most critical issues are the localization, identification, detection of the room occupant. Internet of Things (IoT) along with machine learning proved the increase of the smartness of the building by providing real-time data acquisition using sensors and actuators for prediction mechanisms. This paper proposes the implementation of an IoT framework to capture indoor environmental parameters for occupancy multivariate time-series data. The application of the Long Short Term Memory (LSTM) Deep Learning algorithm is used to infer the knowledge of the presence of human beings. An experiment is conducted in an office room using multivariate time-series as predictors in the regression forecasting problem. The results obtained demonstrate that with the developed system it is possible to obtain, process, and store environmental information. The information collected was applied to the LSTM algorithm and compared with other machine learning algorithms. The compared algorithms are Support Vector Machine, Naïve Bayes Network, and Multilayer Perceptron Feed-Forward Network. The outcomes based on the parametric calibrations demonstrate that LSTM performs better in the context of the proposed application.

scholarly journals An improved framework to predict river flow time series data

PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e7183 ◽  
Author(s):  
Hafiza Mamona Nazir ◽  
Ijaz Hussain ◽  
Ishfaq Ahmad ◽  
Muhammad Faisal ◽  
Ibrahim M. Almanjahie
Keyword(s):  
Time Series ◽  
Water Resource Management ◽  
River Flow ◽  
Time Series Data ◽  
Flow Time ◽  
Indus Basin ◽  
Series Data ◽  
Percentage Error ◽  
Empirical Bayesian ◽  
Noise Characteristics

Due to non-stationary and noise characteristics of river flow time series data, some pre-processing methods are adopted to address the multi-scale and noise complexity. In this paper, we proposed an improved framework comprising Complete Ensemble Empirical Mode Decomposition with Adaptive Noise-Empirical Bayesian Threshold (CEEMDAN-EBT). The CEEMDAN-EBT is employed to decompose non-stationary river flow time series data into Intrinsic Mode Functions (IMFs). The derived IMFs are divided into two parts; noise-dominant IMFs and noise-free IMFs. Firstly, the noise-dominant IMFs are denoised using empirical Bayesian threshold to integrate the noises and sparsities of IMFs. Secondly, the denoised IMF’s and noise free IMF’s are further used as inputs in data-driven and simple stochastic models respectively to predict the river flow time series data. Finally, the predicted IMF’s are aggregated to get the final prediction. The proposed framework is illustrated by using four rivers of the Indus Basin System. The prediction performance is compared with Mean Square Error, Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE). Our proposed method, CEEMDAN-EBT-MM, produced the smallest MAPE for all four case studies as compared with other methods. This suggests that our proposed hybrid model can be used as an efficient tool for providing the reliable prediction of non-stationary and noisy time series data to policymakers such as for planning power generation and water resource management.

A deep learning method for data recovery in sensor networks using effective spatio-temporal correlation data

Sensor Review ◽  
2019 ◽  
Vol 39 (2) ◽  
pp. 208-217 ◽  
Author(s):  
Jinghan Du ◽  
Haiyan Chen ◽  
Weining Zhang
Keyword(s):  
Deep Learning ◽  
Sensor Networks ◽  
Large Scale ◽  
Time Series Data ◽  
Temporal Correlation ◽  
Data Recovery ◽  
Series Data ◽  
Learning Method ◽  
Content Type ◽  
Spatio Temporal

Purpose In large-scale monitoring systems, sensors in different locations are deployed to collect massive useful time-series data, which can help in real-time data analytics and its related applications. However, affected by hardware device itself, sensor nodes often fail to work, resulting in a common phenomenon that the collected data are incomplete. The purpose of this study is to predict and recover the missing data in sensor networks. Design/methodology/approach Considering the spatio-temporal correlation of large-scale sensor data, this paper proposes a data recover model in sensor networks based on a deep learning method, i.e. deep belief network (DBN). Specifically, when one sensor fails, the historical time-series data of its own and the real-time data from surrounding sensor nodes, which have high similarity with a failure observed using the proposed similarity filter, are collected first. Then, the high-level feature representation of these spatio-temporal correlation data is extracted by DBN. Moreover, to determine the structure of a DBN model, a reconstruction error-based algorithm is proposed. Finally, the missing data are predicted based on these features by a single-layer neural network. Findings This paper collects a noise data set from an airport monitoring system for experiments. Various comparative experiments show that the proposed algorithms are effective. The proposed data recovery model is compared with several other classical models, and the experimental results prove that the deep learning-based model can not only get a better prediction accuracy but also get a better performance in training time and model robustness. Originality/value A deep learning method is investigated in data recovery task, and it proved to be effective compared with other previous methods. This might provide a practical experience in the application of a deep learning method.

Sign in / Sign up

Export Citation Format

Share Document