scholarly journals Fully Automated Detection of Supraglacial Lake Area for Northeast Greenland Using Sentinel-2 Time-Series

2021 ◽  
Vol 13 (2) ◽  
pp. 205
Author(s):  
Philipp Hochreuther ◽  
Niklas Neckel ◽  
Nathalie Reimann ◽  
Angelika Humbert ◽  
Matthias Braun
Keyword(s):  
Time Series ◽  
Observation Interval ◽  
Lake Area ◽  
Climate Data ◽  
Melt Pond ◽  
Automated Processing ◽  
Average Observation ◽  
Average Size ◽  
Lake Size ◽  
Sentinel 2

The usability of multispectral satellite data for detecting and monitoring supraglacial meltwater ponds has been demonstrated for western Greenland. For a multitemporal analysis of large regions or entire Greenland, largely automated processing routines are required. Here, we present a sequence of algorithms that allow for an automated Sentinel-2 data search, download, processing, and generation of a consistent and dense melt pond area time-series based on open-source software. We test our approach for a ~82,000 km2 area at the 79°N Glacier (Nioghalvfjerdsbrae) in northeast Greenland, covering the years 2016, 2017, 2018 and 2019. Our lake detection is based on the ratio of the blue and red visible bands using a minimum threshold. To remove false classification caused by the similar spectra of shadow and water on ice, we implement a shadow model to mask out topographically induced artifacts. We identified 880 individual lakes, traceable over 479 time-steps throughout 2016–2019, with an average size of 64,212 m2. Of the four years, 2019 had the most extensive lake area coverage with a maximum of 333 km2 and a maximum individual lake size of 30 km2. With 1.5 days average observation interval, our time-series allows for a comparison with climate data of daily resolution, enabling a better understanding of short-term climate-glacier feedbacks.

scholarly journals Comparison of Multi-Temporal PlanetScope Data with Landsat 8 and Sentinel-2 Data for Estimating Airborne LiDAR Derived Canopy Height in Temperate Forests

2020 ◽  
Vol 12 (11) ◽  
pp. 1876 ◽  
Author(s):  
Katsuto Shimizu ◽  
Tetsuji Ota ◽  
Nobuya Mizoue ◽  
Hideki Saito
Keyword(s):  
Time Series ◽  
Prediction Accuracy ◽  
Time Series Data ◽  
Airborne Lidar ◽  
Canopy Height ◽  
Forest Monitoring ◽  
Series Data ◽  
Landsat 8 ◽  
Multi Temporal ◽  
Sentinel 2

Developing accurate methods for estimating forest structures is essential for efficient forest management. The high spatial and temporal resolution data acquired by CubeSat satellites have desirable characteristics for mapping large-scale forest structural attributes. However, most studies have used a median composite or single image for analyses. The multi-temporal use of CubeSat data may improve prediction accuracy. This study evaluates the capabilities of PlanetScope CubeSat data to estimate canopy height derived from airborne Light Detection and Ranging (LiDAR) by comparing estimates using Sentinel-2 and Landsat 8 data. Random forest (RF) models using a single composite, multi-seasonal composites, and time-series data were investigated at different spatial resolutions of 3, 10, 20, and 30 m. The highest prediction accuracy was obtained by the PlanetScope multi-seasonal composites at 3 m (relative root mean squared error: 51.3%) and Sentinel-2 multi-seasonal composites at the other spatial resolutions (40.5%, 35.2%, and 34.2% for 10, 20, and 30 m, respectively). The results show that RF models using multi-seasonal composites are 1.4% more accurate than those using harmonic metrics from time-series data in the median. PlanetScope is recommended for canopy height mapping at finer spatial resolutions. However, the unique characteristics of PlanetScope data in a spatial and temporal context should be further investigated for operational forest monitoring.

scholarly journals Onboard Radio Frequency Interference as the Origin of Inter-Satellite Biases for Microwave Humidity Sounders

2019 ◽  
Vol 11 (7) ◽  
pp. 866 ◽  
Author(s):  
Imke Hans ◽  
Martin Burgdorf ◽  
Stefan A. Buehler
Keyword(s):  
Time Series ◽  
Radio Frequency ◽  
Time Dependent ◽  
Radio Frequency Interference ◽  
Climate Variables ◽  
Compelling Evidence ◽  
Climate Data ◽  
The Earth ◽  
Correction Scheme

Understanding the causes of inter-satellite biases in climate data records from observations of the Earth is crucial for constructing a consistent time series of the essential climate variables. In this article, we analyse the strong scan- and time-dependent biases observed for the microwave humidity sounders on board the NOAA-16 and NOAA-19 satellites. We find compelling evidence that radio frequency interference (RFI) is the cause of the biases. We also devise a correction scheme for the raw count signals for the instruments to mitigate the effect of RFI. Our results show that the RFI-corrected, recalibrated data exhibit distinctly reduced biases and provide consistent time series.

An updated national-scale mangrove forest map in China Using Sentinel-1 and Sentinel-2 Time-Series Data with Google Earth Engine

2021 ◽  
Author(s):  
Luojia Hu ◽  
Wei Yao ◽  
Zhitong Yu ◽  
Yan Huang
Keyword(s):  
Time Series ◽  
High Resolution ◽  
Mangrove Forest ◽  
Google Earth ◽  
Series Data ◽  
National Scale ◽  
Mangrove Area ◽  
Google Earth Engine ◽  
Forest Maps ◽  
Sentinel 2

<p>A high resolution mangrove map (e.g., 10-m), which can identify mangrove patches with small size (< 1 ha), is a central component to quantify ecosystem functions and help government take effective steps to protect mangroves, because the increasing small mangrove patches, due to artificial destruction and plantation of new mangrove trees, are vulnerable to climate change and sea level rise, and important for estimating mangrove habitat connectivity with adjacent coastal ecosystems as well as reducing the uncertainty of carbon storage estimation. However, latest national scale mangrove forest maps mainly derived from Landsat imagery with 30-m resolution are relatively coarse to accurately characterize the distribution of mangrove forests, especially those of small size (area < 1 ha). Sentinel imagery with 10-m resolution provide the opportunity for identifying these small mangrove patches and generating high-resolution mangrove forest maps. Here, we used spectral/backscatter-temporal variability metrics (quantiles) derived from Sentinel-1 SAR (Synthetic Aperture Radar) and sentinel-2 MSI (Multispectral Instrument) time-series imagery as input features for random forest to classify mangroves in China. We found that Sentinel-2 imagery is more effective than Sentinel-1 in mangrove extraction, and a combination of SAR and MSI imagery can get a better accuracy (F1-score of 0.94) than using them separately (F1-score of 0.88 using Sentinel-1 only and 0.895 using Sentinel-2 only). The 10-m mangrove map derived by combining SAR and MSI data identified 20,003 ha mangroves in China and the areas of small mangrove patches (< 1 ha) was 1741 ha, occupying 8.7% of the whole mangrove area. The largest area (819 ha) of small mangrove patches is located in Guangdong Province, and in Fujian the percentage of small mangrove patches in total mangrove area is the highest (11.4%). A comparison with existing 30-m mangrove products showed noticeable disagreement, indicating the necessity for generating mangrove extent product with 10-m resolution. This study demonstrates the significant potential of using Sentinel-1 and Sentinel-2 images to produce an accurate and high-resolution mangrove forest map with Google Earth Engine (GEE). The mangrove forest maps are expected to provide critical information to conservation managers, scientists, and other stakeholders in monitoring the dynamics of mangrove forest.</p>

scholarly journals Sentinel-2 Based Temporal Detection of Agricultural Land Use Anomalies in Support of Common Agricultural Policy Monitoring

2018 ◽  
Vol 7 (10) ◽  
pp. 405 ◽  
Author(s):  
Urška Kanjir ◽  
Nataša Đurić ◽  
Tatjana Veljanovski
Keyword(s):  
Land Use ◽  
Time Series ◽  
Agricultural Policy ◽  
Common Agricultural Policy ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Agricultural Land ◽  
Agricultural Land Use ◽  
Land Use Control ◽  
Sentinel 2

The European Common Agricultural Policy (CAP) post-2020 timeframe reform will reshape the agriculture land use control procedures from a selected risk fields-based approach into an all-inclusive one. The reform fosters the use of Sentinel data with the objective of enabling greater transparency and comparability of CAP results in different Member States. In this paper, we investigate the analysis of a time series approach using Sentinel-2 images and the suitability of the BFAST (Breaks for Additive Season and Trend) Monitor method to detect changes that correspond to land use anomaly observations in the assessment of agricultural parcel management activities. We focus on identifying certain signs of ineligible (inconsistent) use in permanent meadows and crop fields in one growing season, and in particular those that can be associated with time-defined greenness (vegetation vigor). Depending on the requirements of the BFAST Monitor method and currently time-limited Sentinel-2 dataset for the reliable anomaly study, we introduce customized procedures to support and verify the BFAST Monitor anomaly detection results using the analysis of NDVI (Normalized Difference Vegetation Index) object-based temporal profiles and time-series standard deviation output, where geographical objects of interest are parcels of particular land use. The validation of land use candidate anomalies in view of land use ineligibilities was performed with the information on declared land annual use and field controls, as obtained in the framework of subsidy granting in Slovenia. The results confirm that the proposed combined approach proves efficient to deal with short time series and yields high accuracy rates in monitoring agricultural parcel greenness. As such it can already be introduced to help the process of agricultural land use control within certain CAP activities in the preparation and adaptation phase.

Time series analysis of Holocene climate data

1990 ◽  
Vol 330 (1615) ◽  
pp. 601-616 ◽  
Keyword(s):  
Time Series ◽  
Time Series Analysis ◽  
Time Domain ◽  
Small Sample ◽  
Climate Data ◽  
Holocene Climate ◽  
Series Analysis ◽  
Window Method ◽  
Band Limited ◽  
Periodic Components

Holocene climate records are imperfect proxies for processes containing complicated mixtures of periodic and random signals. I summarize time series analysis methods for such data with emphasis on the multiple-data-window technique. This method differs from conventional approaches to time series analysis in that a set of data tapers is applied to the data in the time domain before Fourier transforming. The tapers, or data windows, are discrete prolate spheroidal sequences characterized as being the most nearly band-limited functions possible among functions defined on a finite time domain. The multiple-window method is a small-sample theory and essentially an inverse method applied to the finite Fourier transform. For climate data it has the major advantage of providing a narrowband F -test for the presence and significance of periodic components and of being able to separate them from the non-deterministic part of the process. Confidence intervals for the estimated quantities are found by jackknifing across windows. Applied to 14 C records, this method confirms the presence of the ‘Suess wiggles’ and give an estimated period of 208.2 years. Analysis of the thickness variations of bristlecone pine growth rings shows a general absence of direct periodic components but a variation in the structure of the time series with a 2360-year period.

scholarly journals Distinguishing Trends and Shifts from Memory in Climate Data

2018 ◽  
Vol 31 (23) ◽  
pp. 9519-9543 ◽  
Author(s):  
Claudie Beaulieu ◽  
Rebecca Killick
Keyword(s):  
Climate Change ◽  
Time Series ◽  
Information Criterion ◽  
Steady Increase ◽  
Climate Data ◽  
Surface Warming ◽  
Abrupt Changes ◽  
Short Memory Process ◽  
The 1960S ◽  
And Shifts

The detection of climate change and its attribution to the corresponding underlying processes is challenging because signals such as trends and shifts are superposed on variability arising from the memory within the climate system. Statistical methods used to characterize change in time series must be flexible enough to distinguish these components. Here we propose an approach tailored to distinguish these different modes of change by fitting a series of models and selecting the most suitable one according to an information criterion. The models involve combinations of a constant mean or a trend superposed to a background of white noise with or without autocorrelation to characterize the memory, and are able to detect multiple changepoints in each model configuration. Through a simulation study on synthetic time series, the approach is shown to be effective in distinguishing abrupt changes from trends and memory by identifying the true number and timing of abrupt changes when they are present. Furthermore, the proposed method is better performing than two commonly used approaches for the detection of abrupt changes in climate time series. Using this approach, the so-called hiatus in recent global mean surface warming fails to be detected as a shift in the rate of temperature rise but is instead consistent with steady increase since the 1960s/1970s. Our method also supports the hypothesis that the Pacific decadal oscillation behaves as a short-memory process rather than forced mean shifts as previously suggested. These examples demonstrate the usefulness of the proposed approach for change detection and for avoiding the most pervasive types of mistake in the detection of climate change.

Sign in / Sign up

Export Citation Format

Share Document