scholarly journals Acoustic Mapping of Submerged Stone Age Sites—A HALD Approach

2021 ◽  
Vol 13 (3) ◽  
pp. 445
Author(s):  
Ole Grøn ◽  
Lars Ole Boldreel ◽  
Morgan F. Smith ◽  
Shawn Joy ◽  
Rostand Tayong Boumda ◽  
...  
Keyword(s):  
High Resolution ◽  
Resonance Phenomenon ◽  
Stone Age ◽  
Acoustic Response ◽  
Fe Modelling ◽  
Response Characteristics ◽  
Reflection Seismic ◽  
Stage Of Development ◽  
Reflection Seismics ◽  
Marine Areas

Acoustic response from lithics knapped by humans has been demonstrated to facilitate effective detection of submerged Stone Age sites exposed on the seafloor or embedded within its sediments. This phenomenon has recently enabled the non-invasive detection of several hitherto unknown submerged Stone Age sites, as well as the registration of acoustic responses from already known localities. Investigation of the acoustic-response characteristics of knapped lithics, which appear not to be replicated in naturally cracked lithic pieces (geofacts), is presently on-going through laboratory experiments and finite element (FE) modelling of high-resolution 3D-scanned pieces. Experimental work is also being undertaken, employing chirp sub-bottom systems (reflection seismic) on known sites in marine areas and inland water bodies. Fieldwork has already yielded positive results in this initial stage of development of an optimised Human-Altered Lithic Detection (HALD) method for mapping submerged Stone Age sites. This paper reviews the maritime archaeological perspectives of this promising approach, which potentially facilitates new and improved practice, summarizes existing data, and reports on the present state of development. Its focus is not reflection seismics as such, but a useful resonance phenomenon induced by the use of high-resolution reflection seismic systems.

scholarly journals Investigating the Norse Harbour of Igaliku (Southern Greenland) Using an Integrated System of Side-Scan Sonar and High-Resolution Reflection Seismics

2019 ◽  
Vol 11 (16) ◽  
pp. 1889 ◽  
Author(s):  
Dennis Wilken ◽  
Tina Wunderlich ◽  
Peter Feldens ◽  
Joris Coolen ◽  
John Preston ◽  
...  
Keyword(s):  
High Resolution ◽  
Sea Level ◽  
Integrated System ◽  
Small Island ◽  
Differential Gps ◽  
Side Scan Sonar ◽  
Reflection Seismic ◽  
Reflection Seismics ◽  
Survey System ◽  
Fertile Land

This study presents the results of a marine geophysical survey performed in the Igaliku fjord in southern Greenland in order to understand the harbour setting of the former Norse settlement Garðar (modern Igaliku). The aims of the survey were (a) to reconstruct the former coastline during the first centuries of the Norse settlement period (c. 11/12th centuries) and (b) to search for archaeological remains on the seabed connected to maritime traffic and trade. In order to approach these goals, we used an integrated marine survey system consisting of a side-scan sonar and a reflection seismic system. The system was designed for lightweight transport, allowing measurements in areas that are logistically difficult to access. The side-scan sonar data revealed no remains of clear archaeological origin. Bathymetric data from seismic seabed reflection and additional Differential GPS height measurements yielded a high-resolution bathymetric map. Based on estimates of Holocene relative sea level change, our bathymetry model was used to reconstruct the shift of the high and low-water line since the early Norse period. The reconstructed coastline shows that a small island, which hosts the ruins of a tentative Norse warehouse at the mouth of the present harbour, was connected to the shore at low tide during the early Norse period. In addition, reflection seismics and side-scan sonar images reveal a sheltered inlet with steep slopes on one side of the island, which may have functioned as a landing bridge used to load ships. We also show that the loss of fertile land due to sea level rise until the end of the Norse settlement was insignificant compared to the available fertile land in the Igaliku fjord and is thus not the reason for the collapse of the colony.

The use of geophysical prospecting for imaging active faults in the Roer Graben, Belgium

Geophysics ◽  
2001 ◽  
Vol 66 (1) ◽  
pp. 78-89 ◽  
Author(s):  
Donat Demanet ◽  
François Renardy ◽  
Kris Vanneste ◽  
Denis Jongmans ◽  
Thierry Camelbeeck ◽  
...  
Keyword(s):  
High Resolution ◽  
Physical Properties ◽  
Fault Zone ◽  
Geophysical Methods ◽  
Depth Range ◽  
Electrical Tomography ◽  
Reflection Seismic ◽  
Refraction Seismic ◽  
Geophysical Surveys ◽  
Geophysical Techniques

As part of a paleoseismological investigation along the Bree fault scarp (western border of the Roer Graben), various geophysical methods [electrical profiling, electromagnetic (EM) profiling, refraction seismic tests, electrical tomography, ground‐penetrating radar (GPR), and high‐resolution reflection seismic profiles] were used to locate and image an active fault zone in a depth range between a few decimeters to a few tens of meters. These geophysical investigations, in parallel with geomorphological and geological analyses, helped in the decision to locate trench excavations exposing the fault surfaces. The results could then be checked with the observations in four trenches excavated across the scarp. Geophysical methods pointed out anomalies at all sites of the fault position. The contrast of physical properties (electrical resistivity and permittivity, seismic velocity) observed between the two fault blocks is a result of a differences in the lithology of the juxtaposed soil layers and of a change in the water table depth across the fault. Extremely fast techniques like electrical and EM profiling or seismic refraction profiles localized the fault position within an accuracy of a few meters. In a second step, more detailed methods (electrical tomography and GPR) more precisely imaged the fault zone and revealed some structures that were observed in the trenches. Finally, one high‐resolution reflection seismic profile imaged the displacement of the fault at depths as large as 120 m and filled the gap between classical seismic reflection profiles and the shallow geophysical techniques. Like all geophysical surveys, the quality of the data is strongly dependent on the geologic environment and on the contrast of the physical properties between the juxtaposed formations. The combined use of various geophysical techniques is thus recommended for fault mapping, particularly for a preliminary investigation when the geological context is poorly defined.

Automated phase attribute-based picking applied to reflection seismics

Geophysics ◽  
2016 ◽  
Vol 81 (2) ◽  
pp. V141-V150 ◽  
Author(s):  
Emanuele Forte ◽  
Matteo Dossi ◽  
Michele Pipan ◽  
Anna Del Ben
Keyword(s):  
Signal To Noise Ratio ◽  
Phase Method ◽  
Data Sets ◽  
Reflection Seismic ◽  
Instantaneous Phase ◽  
Whole Process ◽  
Specific Analysis ◽  
Reflection Seismics ◽  
Selection Of ◽  
Energy Package

We have applied an attribute-based autopicking algorithm to reflection seismics with the aim of reducing the influence of the user’s subjectivity on the picking results and making the interpretation faster with respect to manual and semiautomated techniques. Our picking procedure uses the cosine of the instantaneous phase to automatically detect and mark as a horizon any recorded event characterized by lateral phase continuity. A patching procedure, which exploits horizon parallelism, can be used to connect consecutive horizons marking the same event but separated by noise-related gaps. The picking process marks all coherent events regardless of their reflection strength; therefore, a large number of independent horizons can be constructed. To facilitate interpretation, horizons marking different phases of the same reflection can be automatically grouped together and specific horizons from each reflection can be selected using different possible methods. In the phase method, the algorithm reconstructs the reflected wavelets by averaging the cosine of the instantaneous phase along each horizon. The resulting wavelets are then locally analyzed and confronted through crosscorrelation, allowing the recognition and selection of specific reflection phases. In case the reflected wavelets cannot be recovered due to shape-altering processing or a low signal-to-noise ratio, the energy method uses the reflection strength to group together subparallel horizons within the same energy package and to select those satisfying either energy or arrival time criteria. These methods can be applied automatically to all the picked horizons or to horizons individually selected by the interpreter for specific analysis. We show examples of application to 2D reflection seismic data sets in complex geologic and stratigraphic conditions, critically reviewing the performance of the whole process.

Reflection seismic imaging of buried shallow salt structures – examples from ongoing case studies in Northern Germany

2021 ◽  
Author(s):  
Ulrich Polom ◽  
Rebekka Mecking ◽  
Phillip Leineweber ◽  
Andreas Omlin
Keyword(s):  
High Resolution ◽  
Water Resources ◽  
Industrial Development ◽  
Geophysical Methods ◽  
Hydrocarbon Exploration ◽  
P Wave ◽  
Depth Range ◽  
Reflection Seismic ◽  
Wide Range ◽  
Cap Rock

<p>In the North German Basin salt tectonics generated a wide range of evaporite structures since the Upper Triassic, resulting in e.g. extended salt walls, salt diapirs, and salt pillows in the depth range up to 8 km. Due to their trap and seal properties these structures were in the focus of hydrocarbon exploration over many decades, leading to an excellent mapping of their geometries below 300 m in depth. During salt rise Rotliegend formations were partly involved as a constituent. Some structures penetrated the salt table, some also the former surface. Dissolution (subrosion) and erosion of the salt cap rock by meteoric water took place, combined with several glacial and intraglacial overprints. Finally the salt structures were covered by pleistocene and holocene sediments. This situation partly resulted in proneness for ongoing karstification of the salt cap rock, leading to e.g. local subsidence and sinkhole occurrence at the surface. The geometry, structure and internal lithology of these shallow salt cap rocks are widely unknown. Expanding urban and industrial development, water resources management and increasing climate change effects enhance the demands for shallow mapping and characterization of these structures regarding save building grounds and sustainable water resources.</p><p>Results of shallow drilling investigations of the salt cap rock and the overburden show unexpectedly heterogenous subsurface conditions, yielding to limited success towards mapping and characterization. Thus, shallow high-resolution geophysical methods are in demand to close the gaps with preferred focus of applicability in urban and industrial environments. Method evaluations starting in 2010 geared towards shallow high-resolution reflection seismic to meet the requirements of both depth penetration and structure resolution. Since 2017 a combination of S-wave and P-wave seismic methods including depth calibrations by Vertical Seismic Profiling (VSP) enabled 2.5D subsurface imaging starting few meters below the surface up to several hundred meters depth in 0.5-5 m resolution range, respectively. The resulting profiles image strong variations along the boundaries and on top of the salt cap rock. Beside improved mapping capabilities, aim of research is the development of characteristic data features to differentiate save and non-save areas.</p>

High-resolution 3D reflection seismics on a tidal flat: acquisition, processing and interpretation

First Break ◽  
1988 ◽  
Vol 6 (1203) ◽  
Author(s):  
J. Corsmit ◽  
W.H. Versteeg ◽  
J.H. Brouwer ◽  
K. Helbig
Keyword(s):  
High Resolution ◽  
Tidal Flat ◽  
Reflection Seismics
Sign in / Sign up

Export Citation Format

Share Document