Petri-Net Based Multi-Objective Optimization in Multi-UAV Aided Large-Scale Wireless Power and Information Transfer Networks

Power consumption in wireless sensor networks is high, and the lifetime of a battery has become a bottleneck, restricting network performance. Wireless power transfer with a ground mobile charger is vulnerable to interference from the terrain and other factors, and hence it is difficult to deploy in practice. Accordingly, a novel paradigm is adopted where a multi-UAV (unmanned aerial vehicle) with batteries can transfer power and information to SDs (sensor devices) in a large-scale sensor network. However, there are discrete events, continuous process, time delay, and decisions in such a complicated system. From the perspective of a hybrid system, a hybrid colored cyber Petri net system is proposed here to depict and analyze this problem. Furthermore, the energy utilization rate and information collection time delay are conflict with each other; therefore, UAV-aided wireless power and information transfer is formulated as a multi-objective optimization problem. For this reason, the MAC-NSGA II (multiple ant colony-nondominated sorting genetic algorithm II) is proposed in this work. Firstly, the optimal trajectory of multiple UAVs was obtained, and on this basis, the above two objectives were optimized simultaneously. Large-scale simulation results show that the proposed algorithm is superior to NSGA II and MOEA/D in terms of energy efficiency and information collection delay.

Download Full-text

Synchronous R-NSGA-II: An Extended Preference-Based Evolutionary Algorithm for Multi-Objective Optimization

Informatica ◽

10.15388/informatica.2015.37 ◽

2015 ◽

Vol 26 (1) ◽

pp. 33-50 ◽

Cited By ~ 16

Author(s):

Ernestas Filatovas ◽

Olga Kurasova ◽

Karthik Sindhya

Keyword(s):

Evolutionary Algorithm ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective

Download Full-text

Multi-Objective Lightweight Optimization of Parameterized Suspension Components Based on NSGA-II Algorithm Coupling with Surrogate Model

Machines ◽

10.3390/machines9060107 ◽

2021 ◽

Vol 9 (6) ◽

pp. 107

Author(s):

Rongchao Jiang ◽

Zhenchao Jin ◽

Dawei Liu ◽

Dengfeng Wang

Keyword(s):

Ride Comfort ◽

Lightweight Design ◽

Dynamic Performance ◽

Vehicle Dynamic ◽

Multi Objective Optimization ◽

Original Design ◽

Dynamic Simulations ◽

Nsga Ii ◽

Torsion Beam ◽

Multi Objective

In order to reduce the negative effect of lightweighting of suspension components on vehicle dynamic performance, the control arm and torsion beam widely used in front and rear suspensions were taken as research objects for studying the lightweight design method of suspension components. Mesh morphing technology was employed to define design variables. Meanwhile, the rigid–flexible coupling vehicle model with flexible control arm and torsion beam was built for vehicle dynamic simulations. The total weight of control arm and torsion beam was taken as optimization objective, as well as ride comfort and handling stability performance indexes. In addition, the fatigue life, stiffness, and modal frequency of control arm and torsion beam were taken as the constraints. Then, Kriging model and NSGA-II were adopted to perform the multi-objective optimization of control arm and torsion beam for determining the lightweight scheme. By comparing the optimized and original design, it indicates that the weight of the optimized control arm and torsion beam are reduced 0.505 kg and 1.189 kg, respectively, while structural performance and vehicle performance satisfy the design requirement. The proposed multi-objective optimization method achieves a remarkable mass reduction, and proves to be feasible and effective for lightweight design of suspension components.

Download Full-text

Design and characterization of effective solar cells

Energy Systems ◽

10.1007/s12667-021-00451-x ◽

2021 ◽

Author(s):

Varun Ojha ◽

Giorgio Jansen ◽

Andrea Patanè ◽

Antonino La Magna ◽

Vittorio Romano ◽

...

Keyword(s):

Solar Cells ◽

Quantum Efficiency ◽

Cost Benefit Analysis ◽

Cost Minimization ◽

Cell Structure ◽

Cost Benefit ◽

Structure Design ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective

AbstractWe propose a two-stage multi-objective optimization framework for full scheme solar cell structure design and characterization, cost minimization and quantum efficiency maximization. We evaluated structures of 15 different cell designs simulated by varying material types and photodiode doping strategies. At first, non-dominated sorting genetic algorithm II (NSGA-II) produced Pareto-optimal-solutions sets for respective cell designs. Then, on investigating quantum efficiencies of all cell designs produced by NSGA-II, we applied a new multi-objective optimization algorithm II (OptIA-II) to discover the Pareto fronts of select (three) best cell designs. Our designed OptIA-II algorithm improved the quantum efficiencies of all select cell designs and reduced their fabrication costs. We observed that the cell design comprising an optimally doped zinc-oxide-based transparent conductive oxide (TCO) layer and rough silver back reflector (BR) offered a quantum efficiency ($$Q_e$$ Q e ) of 0.6031. Overall, this paper provides a full characterization of cell structure designs. It derives relationship between quantum efficiency, $$Q_e$$ Q e of a cell with its TCO layer’s doping methods and TCO and BR layer’s material types. Our solar cells design characterization enables us to perform a cost-benefit analysis of solar cells usage in real-world applications.

Download Full-text

Multi-objective optimization of energy efficiency and thermal comfort in an existing office building using NSGA-II with fitness approximation: a case study

Journal of Building Engineering ◽

10.1016/j.jobe.2021.102440 ◽

2021 ◽

pp. 102440

Author(s):

Mohammadamin Ghaderian ◽

Farzad Veysi

Keyword(s):

Energy Efficiency ◽

Thermal Comfort ◽

Office Building ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective ◽

Fitness Approximation

Download Full-text

Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science ◽

10.1177/0954406221995863 ◽

2021 ◽

pp. 095440622199586

Author(s):

Qianhao Xiao ◽

Jun Wang ◽

Boyan Jiang ◽

Weigang Yang ◽

Xiaopei Yang

Keyword(s):

Flow Rate ◽

Optimization Design ◽

Volume Flow Rate ◽

Kriging Model ◽

Volume Flow ◽

Design Parameters ◽

Multi Objective Optimization ◽

Nsga Ii ◽

Multi Objective ◽

Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

Download Full-text

Multi-objective optimization of weld geometry in hybrid fiber laser-arc butt welding using Kriging model and NSGA-II

Applied Physics A ◽

10.1007/s00339-016-0144-2 ◽

2016 ◽

Vol 122 (6) ◽

Cited By ~ 9

Author(s):

Zhongmei Gao ◽

Xinyu Shao ◽

Ping Jiang ◽

Chunming Wang ◽

Qi Zhou ◽

...

Keyword(s):

Fiber Laser ◽

Kriging Model ◽

Multi Objective Optimization ◽

Hybrid Fiber ◽

Nsga Ii ◽

Butt Welding ◽

Multi Objective ◽

Weld Geometry

Download Full-text

Multi-Objective Optimization of Autonomous Microgrids with Reliability Consideration

Energies ◽

10.3390/en14154466 ◽

2021 ◽

Vol 14 (15) ◽

pp. 4466

Author(s):

Maël Riou ◽

Florian Dupriez-Robin ◽

Dominique Grondin ◽

Christophe Le Loup ◽

Michel Benne ◽

...

Keyword(s):

Power Systems ◽

Rural Areas ◽

Energy System ◽

Design Stage ◽

Multi Objective Optimization ◽

Renewable Energy Resources ◽

Nsga Ii ◽

Renewable Integration ◽

Multi Objective ◽

Trade Offs

Microgrids operating on renewable energy resources have potential for powering rural areas located far from existing grid infrastructures. These small power systems typically host a hybrid energy system of diverse architecture and size. An effective integration of renewable energies resources requires careful design. Sizing methodologies often lack the consideration for reliability and this aspect is limited to power adequacy. There exists an inherent trade-off between renewable integration, cost, and reliability. To bridge this gap, a sizing methodology has been developed to perform multi-objective optimization, considering the three design objectives mentioned above. This method is based on the non-dominated sorting genetic algorithm (NSGA-II) that returns the set of optimal solutions under all objectives. This method aims to identify the trade-offs between renewable integration, reliability, and cost allowing to choose the adequate architecture and sizing accordingly. As a case study, we consider an autonomous microgrid, currently being installed in a rural area in Mali. The results show that increasing system reliability can be done at the least cost if carried out in the initial design stage.

Download Full-text