scholarly journals Displacement Characterization and Spatial-Temporal Evolution of the 2020 Aniangzhai Landslide in Danba County Using Time-Series InSAR and Multi-Temporal Optical Dataset

2021 ◽  
Vol 14 (1) ◽  
pp. 68
Author(s):  
Jianming Kuang ◽  
Alex Hay-Man Ng ◽  
Linlin Ge
Keyword(s):  
Time Series ◽  
Heavy Rainfall ◽  
Surface Deformation ◽  
Temporal Evolution ◽  
Failure Surface ◽  
Optical Images ◽  
Before And After ◽  
Multi Temporal ◽  
Triggering Factor ◽  
Offset Tracking

On 17 June 2020, a large ancient landslide over the Aniangzhai (ANZ) slope, Danba County, Sichuan Province, China, was reactivated by a series of multiple phenomena, including debris flow triggered by heavy rainfall and flooding. In this study, Synthetic Aperture Radar (SAR) images acquired by the Sentinel-1A/B satellite and optical images captured by the PlanetScope satellites were jointly used to analyze and explore the deformation characteristics and the Spatial-Temporal evolution of the ANZ landslide before and after the multi-hazard chain. Several areas of pre-failure movements were found from the multi-temporal optical images analysis before the reactivation of the ANZ landslide. The large post-failure surface deformation over the ANZ slope was also retrieved by the optical pixel offset tracking (POT) technique. A major northwest movement with the maximum horizontal deformation of up to 14.4 m was found. A time-series InSAR technique was applied to analyze the descending and ascending Sentinel-1A/B datasets spanning from March 2018 to July 2020, showing that the maximum magnitudes of the Line of Sight (LoS) displacement velocities were −70 mm/year and 45 mm/year, respectively. The Spatial-Temporal evolution over the ANZ landslide was analyzed based on the time-series results. No obvious change in acceleration (precursory deformation) was detected before the multi-hazard chain, while clear accelerated deformation can be observed over the slope after the event. This suggested that heavy rainfall was the most significant triggering factor for the generation and reactivation of the ANZ landslide. Other preparatory factors, including the deformation behavior, the undercutting and erosion of the river and the outburst flood, the local terrain conditions, and earthquakes, might also have played an important role in the generation and reactivation of the landslide.

scholarly journals Detecting Long-Term Deformation of a Loess Landslide from the Phase and Amplitude of Satellite SAR Images: A Retrospective Analysis for the Closure of a Tunnel Event

2021 ◽  
Vol 13 (23) ◽  
pp. 4841
Author(s):  
Yaru Zhu ◽  
Haijun Qiu ◽  
Zijing Liu ◽  
Jiading Wang ◽  
Dongdong Yang ◽  
...  
Keyword(s):  
Local Governments ◽  
Surface Deformation ◽  
Failure Surface ◽  
Deformation Characteristics ◽  
Spatiotemporal Evolution ◽  
Loess Landslide ◽  
Landslide Deformation ◽  
Term Creep ◽  
Offset Tracking

Information about the long-term spatiotemporal evolution of landslides can improve the understanding of landslides. However, since landslide deformation characteristics differ it is difficult to monitor the entire movement of a landslide using a single method. The Interferometric Synthetic Aperture Radar (InSAR) and pixel offset tracking (POT) method can complement each other when monitoring deformation at different landslide stages. Therefore, the InSAR and improved POT method were adapted to study the pre- and post-failure surface deformation characteristics of the Gaojiawan landslide to deepen understanding of the long-term spatiotemporal evolution characteristics of landslides. The results show that the deformation displacement gradient of the Gaojiawan landslide exhibited rapid movement that exceeded the measurable limit of InSAR during the first disaster. Moreover, the Gaojiawan landslide has experienced long-term creep, and while studying the post-second landslide’s failure stability, the acceleration trend was identified via time series analysis, which can be used as a precursor signal for landslide disaster warning. Our study aims to provide scientific reference for local governments to help prevent and mitigate geological disasters in this region.

scholarly journals DCN-Based Spatial Features for Improving Parcel-Based Crop Classification Using High-Resolution Optical Images and Multi-Temporal SAR Data

2019 ◽  
Vol 11 (13) ◽  
pp. 1619 ◽  
Author(s):  
Zhou Ya’nan ◽  
Luo Jiancheng ◽  
Feng Li ◽  
Zhou Xiaocheng
Keyword(s):  
Time Series ◽  
High Resolution ◽  
Short Term Memory ◽  
Multivariate Time Series ◽  
Hunan Province ◽  
Spatial Features ◽  
Optical Images ◽  
Multi Temporal ◽  
Crop Classification ◽  
Sar Data

Spatial features retrieved from satellite data play an important role for improving crop classification. In this study, we proposed a deep-learning-based time-series analysis method to extract and organize spatial features to improve parcel-based crop classification using high-resolution optical images and multi-temporal synthetic aperture radar (SAR) data. Central to this method is the use of multiple deep convolutional networks (DCNs) to extract spatial features and to use the long short-term memory (LSTM) network to organize spatial features. First, a precise farmland parcel map was delineated from optical images. Second, hundreds of spatial features were retrieved using multiple DCNs from preprocessed SAR images and overlaid onto the parcel map to construct multivariate time-series of crop growth for parcels. Third, LSTM-based network structures for organizing these time-series features were constructed to produce a final parcel-based classification map. The method was applied to a dataset of high-resolution ZY-3 optical images and multi-temporal Sentinel-1A SAR data to classify crop types in the Hunan Province of China. The classification results, showing an improvement of greater than 5.0% in overall accuracy relative to methods without spatial features, demonstrated the effectiveness of the proposed method in extracting and organizing spatial features for improving parcel-based crop classification.

scholarly journals In-Season Mapping of Irrigated Crops Using Landsat 8 and Sentinel-1 Time Series

2019 ◽  
Vol 11 (2) ◽  
pp. 118 ◽  
Author(s):  
Valérie Demarez ◽  
Florian Helen ◽  
Claire Marais-Sicre ◽  
Frédéric Baup
Keyword(s):  
Time Series ◽  
Shuttle Radar Topography Mission ◽  
Irrigation Scheduling ◽  
Landsat 8 ◽  
Radar Images ◽  
Optical Images ◽  
Multi Temporal ◽  
Irrigated Crops ◽  
Elevation Model ◽  
The Impact

Numerous studies have reported the use of multi-spectral and multi-temporal remote sensing images to map irrigated crops. Such maps are useful for water management. The recent availability of optical and radar image time series such as the Sentinel data offers new opportunities to map land cover with high spatial and temporal resolutions. Early identification of irrigated crops is of major importance for irrigation scheduling, but the cloud coverage might significantly reduce the number of available optical images, making crop identification difficult. SAR image time series such as those provided by Sentinel-1 offer the possibility of improving early crop mapping. This paper studies the impact of the Sentinel-1 images when used jointly with optical imagery (Landsat8) and a digital elevation model of the Shuttle Radar Topography Mission (SRTM). The study site is located in a temperate zone (southwest France) with irrigated maize crops. The classifier used is the Random Forest. The combined use of the different data (radar, optical, and SRTM) improves the early classifications of the irrigated crops (k = 0.89) compared to classifications obtained using each type of data separately (k = 0.84). The use of the DEM is significant for the early stages but becomes useless once crops have reached their full development. In conclusion, compared to a “full optical” approach, the “combined” method is more robust over time as radar images permit cloudy conditions to be overcome.

scholarly journals Mapping Winter Crops in China with Multi-Source Satellite Imagery and Phenology-Based Algorithm

2019 ◽  
Vol 11 (7) ◽  
pp. 820 ◽  
Author(s):  
Haifeng Tian ◽  
Ni Huang ◽  
Zheng Niu ◽  
Yuchu Qin ◽  
Jie Pei ◽  
...  
Keyword(s):  
Time Series ◽  
Large Scale ◽  
Time Windows ◽  
Vegetation Indices ◽  
Optical Images ◽  
Landsat 7 ◽  
Multi Temporal ◽  
Winter Crop ◽  
Winter Crops ◽  
Sentinel 2

Timely and accurate mapping of winter crop planting areas in China is important for food security assessment at a national level. Time-series of vegetation indices, such as the normalized difference vegetation index (NDVI), are widely used for crop mapping, as they can characterize the growth cycle of crops. However, with the moderate spatial resolution optical imagery acquired by Landsat and Sentinel-2, it is difficult to obtain complete time-series curves for vegetation indices due to the influence of the revisit cycle of the satellite and weather conditions. Therefore, in this study, we propose a method for compositing the multi-temporal NDVI, in order to map winter crop planting areas with the Landsat-7 and -8 and Sentinel-2 optical images. The algorithm composites the multi-temporal NDVI into three key values, according to two time-windows—a period of low NDVI values and a period of high NDVI values—for the winter crops. First, we identify the two time-windows, according to the time-series of the NDVI obtained from daily Moderate Resolution Imaging Spectroradiometer observations. Second, the 30 m spatial resolution multi-temporal NDVI curve, derived from the Landsat-7 and -8 and Sentinel-2 optical images, is composited by selecting the maximal value in the high NDVI value period, and the minimal and median values in the low NDVI value period, using an algorithm of the Google Earth Engine. Third, a decision tree classification method is utilized to perform the winter crop classification at a pixel level. The results indicate that this method is effective for the large-scale mapping of winter crops. In the study area, the area of winter crops in 2018 was determined to be 207,641 km2, with an overall accuracy of 96.22% and a kappa coefficient of 0.93. The method proposed in this paper is expected to contribute to the rapid and accurate mapping of winter crops in large-scale applications and analyses.

scholarly journals Constructing Adaptive Deformation Models for Estimating DEM Error in SBAS-InSAR Based on Hypothesis Testing

2021 ◽  
Vol 13 (10) ◽  
pp. 2006
Author(s):  
Jun Hu ◽  
Qiaoqiao Ge ◽  
Jihong Liu ◽  
Wenyan Yang ◽  
Zhigui Du ◽  
...  
Keyword(s):  
Time Series ◽  
Hypothesis Testing ◽  
Surface Deformation ◽  
A Priori ◽  
Least Square ◽  
Deformation Model ◽  
Phase Time ◽  
Testing Theory ◽  
Sbas Insar ◽  
Deformation Models

The Interferometric Synthetic Aperture Radar (InSAR) technique has been widely used to obtain the ground surface deformation of geohazards (e.g., mining subsidence and landslides). As one of the inherent errors in the interferometric phase, the digital elevation model (DEM) error is usually estimated with the help of an a priori deformation model. However, it is difficult to determine an a priori deformation model that can fit the deformation time series well, leading to possible bias in the estimation of DEM error and the deformation time series. In this paper, we propose a method that can construct an adaptive deformation model, based on a set of predefined functions and the hypothesis testing theory in the framework of the small baseline subset InSAR (SBAS-InSAR) method. Since it is difficult to fit the deformation time series over a long time span by using only one function, the phase time series is first divided into several groups with overlapping regions. In each group, the hypothesis testing theory is employed to adaptively select the optimal deformation model from the predefined functions. The parameters of adaptive deformation models and the DEM error can be modeled with the phase time series and solved by a least square method. Simulations and real data experiments in the Pingchuan mining area, Gaunsu Province, China, demonstrate that, compared to the state-of-the-art deformation modeling strategy (e.g., the linear deformation model and the function group deformation model), the proposed method can significantly improve the accuracy of DEM error estimation and can benefit the estimation of deformation time series.

scholarly journals Adjoint-based direct data assimilation of GNSS time series for optimizing frictional parameters and predicting postseismic deformation following the 2003 Tokachi-oki earthquake

2020 ◽  
Vol 72 (1) ◽  
Author(s):  
Masayuki Kano ◽  
Shin’ichi Miyazaki ◽  
Yoichi Ishikawa ◽  
Kazuro Hirahara
Keyword(s):  
Time Series ◽  
Data Assimilation ◽  
Evaluation Method ◽  
Temporal Evolution ◽  
Recovery Process ◽  
Postseismic Deformation ◽  
Coseismic Slip ◽  
Megathrust Earthquakes ◽  
Spatio Temporal ◽  
Gnss Time Series

Abstract Postseismic Global Navigation Satellite System (GNSS) time series followed by megathrust earthquakes can be interpreted as a result of afterslip on the plate interface, especially in its early phase. Afterslip is a stress release process accumulated by adjacent coseismic slip and can be considered a recovery process for future events during earthquake cycles. Spatio-temporal evolution of afterslip often triggers subsequent earthquakes through stress perturbation. Therefore, it is important to quantitatively capture the spatio-temporal evolution of afterslip and related postseismic crustal deformation and to predict their future evolution with a physics-based simulation. We developed an adjoint data assimilation method, which directly assimilates GNSS time series into a physics-based model to optimize the frictional parameters that control the slip behavior on the fault. The developed method was validated with synthetic data. Through the optimization of frictional parameters, the spatial distributions of afterslip could roughly (but not in detail) be reproduced if the observation noise was included. The optimization of frictional parameters reproduced not only the postseismic displacements used for the assimilation, but also improved the prediction skill of the following time series. Then, we applied the developed method to the observed GNSS time series for the first 15 days following the 2003 Tokachi-oki earthquake. The frictional parameters in the afterslip regions were optimized to A–B ~ O(10 kPa), A ~ O(100 kPa), and L ~ O(10 mm). A large afterslip is inferred on the shallower side of the coseismic slip area. The optimized frictional parameters quantitatively predicted the postseismic GNSS time series for the following 15 days. These characteristics can also be detected if the simulation variables can be simultaneously optimized. The developed data assimilation method, which can be directly applied to GNSS time series following megathrust earthquakes, is an effective quantitative evaluation method for assessing risks of subsequent earthquakes and for monitoring the recovery process of megathrust earthquakes.

scholarly journals Comparison of Multi-Temporal PlanetScope Data with Landsat 8 and Sentinel-2 Data for Estimating Airborne LiDAR Derived Canopy Height in Temperate Forests

2020 ◽  
Vol 12 (11) ◽  
pp. 1876 ◽  
Author(s):  
Katsuto Shimizu ◽  
Tetsuji Ota ◽  
Nobuya Mizoue ◽  
Hideki Saito
Keyword(s):  
Time Series ◽  
Prediction Accuracy ◽  
Time Series Data ◽  
Airborne Lidar ◽  
Canopy Height ◽  
Forest Monitoring ◽  
Series Data ◽  
Landsat 8 ◽  
Multi Temporal ◽  
Sentinel 2

Developing accurate methods for estimating forest structures is essential for efficient forest management. The high spatial and temporal resolution data acquired by CubeSat satellites have desirable characteristics for mapping large-scale forest structural attributes. However, most studies have used a median composite or single image for analyses. The multi-temporal use of CubeSat data may improve prediction accuracy. This study evaluates the capabilities of PlanetScope CubeSat data to estimate canopy height derived from airborne Light Detection and Ranging (LiDAR) by comparing estimates using Sentinel-2 and Landsat 8 data. Random forest (RF) models using a single composite, multi-seasonal composites, and time-series data were investigated at different spatial resolutions of 3, 10, 20, and 30 m. The highest prediction accuracy was obtained by the PlanetScope multi-seasonal composites at 3 m (relative root mean squared error: 51.3%) and Sentinel-2 multi-seasonal composites at the other spatial resolutions (40.5%, 35.2%, and 34.2% for 10, 20, and 30 m, respectively). The results show that RF models using multi-seasonal composites are 1.4% more accurate than those using harmonic metrics from time-series data in the median. PlanetScope is recommended for canopy height mapping at finer spatial resolutions. However, the unique characteristics of PlanetScope data in a spatial and temporal context should be further investigated for operational forest monitoring.

scholarly journals GPS measurements on pre-, co- and post-seismic surface deformation at first multi-parametric geophysical observatory, Ghuttu in Garhwal Himalaya, India

2020 ◽  
Vol 10 (1) ◽  
pp. 136-144
Author(s):  
P.K. Gautam ◽  
S. Rajesh ◽  
N. Kumar ◽  
C.P. Dabral
Keyword(s):  
Time Series ◽  
Surface Deformation ◽  
Translational Motion ◽  
Anomalous Behavior ◽  
Deformation Pattern ◽  
Local Earthquakes ◽  
Position Time Series ◽  
Continuous Gps ◽  
Gps Time Series ◽  
Gps Station

Abstract We investigate the surface deformation pattern of GPS station at MPGO Ghuttu (GHUT) to find out the cause of anomalous behavior in the continuous GPS time series. Seven years (2007-2013) of GPS data has been analyzed using GAMIT/GLOBK software and generated the daily position time series. The horizontal translational motion at GHUT is 43.7 ± 1 mm/yr at an angle of 41°± 3° towards NE, while for the IGS station at LHAZ, the motion is 49.4 ±1 mm/yr at 18 ± 2.5° towards NEE. The estimated velocity at GHUT station with respect to IISC is 12 ± 1 mm/yr towards SW. Besides, we have also examined anomalous changes in the time series of GHUT before, after and during the occurrences of local earthquakes by considering the empirical strain radius; such that, a possible relationship between the strain radius and the occurrences of earthquakes have been explored. We considered seven local earthquakes on the basis of Dobrovolsky strain radius condition having magnitude from 4.5 to 5.7, which occurred from 2007 to 2011. Results show irrespective of the station strain radius, pre-seismic surface deformational anomalies are observed roughly 70 to 80 days before the occurrence of a Moderate or higher magnitude events. This has been observed for the cases of those events originated from the Uttarakashi and the Chamoli seismic zones in the Garhwal and Kumaun Himalaya. Occurrences of short (< 100 days) and long (two years) inter-seismic events in the Garhwal region plausibly regulating and diffusing the regional strain accumulation.

scholarly journals Complexity traits and synchrony of cryptocurrencies price dynamics

2021 ◽  
Author(s):  
Davide Provenzano ◽  
Rodolfo Baggio
Keyword(s):  
Time Series ◽  
Complex Network ◽  
Complex Structures ◽  
Slope Parameter ◽  
Exponential Distributions ◽  
Horizontal Visibility ◽  
Time Period ◽  
Before And After ◽  
Visibility Algorithm ◽  
Similar Complex

AbstractIn this study, we characterized the dynamics and analyzed the degree of synchronization of the time series of daily closing prices and volumes in US$ of three cryptocurrencies, Bitcoin, Ethereum, and Litecoin, over the period September 1,2015–March 31, 2020. Time series were first mapped into a complex network by the horizontal visibility algorithm in order to revel the structure of their temporal characters and dynamics. Then, the synchrony of the time series was investigated to determine the possibility that the cryptocurrencies under study co-bubble simultaneously. Findings reveal similar complex structures for the three virtual currencies in terms of number and internal composition of communities. To the aim of our analysis, such result proves that price and volume dynamics of the cryptocurrencies were characterized by cyclical patterns of similar wavelength and amplitude over the time period considered. Yet, the value of the slope parameter associated with the exponential distributions fitted to the data suggests a higher stability and predictability for Bitcoin and Litecoin than for Ethereum. The study of synchrony between the time series investigated displayed a different degree of synchronization between the three cryptocurrencies before and after a collapse event. These results could be of interest for investors who might prefer to switch from one cryptocurrency to another to exploit the potential opportunities of profit generated by the dynamics of price and volumes in the market of virtual currencies.

Sign in / Sign up

Export Citation Format

Share Document