scholarly journals Weighted Structured Sparse Reconstruction-Based Lamb Wave Imaging Exploiting Multipath Edge Reflections in an Isotropic Plate

Sensors ◽  
2020 ◽  
Vol 20 (12) ◽  
pp. 3502
Author(s):  
Caibin Xu ◽  
Zhibo Yang ◽  
Mingxi Deng
Keyword(s):  
Lamb Wave ◽  
Isotropic Plate ◽  
Lamb Waves ◽  
Correlation Coefficients ◽  
Sparse Reconstruction ◽  
Imaging Method ◽  
Structured Sparsity ◽  
Large Area ◽  
Prediction Technique ◽  
Wave Imaging

Lamb wave-based structural health monitoring techniques have the ability to scan a large area with relatively few sensors. Lamb wave imaging is a signal processing strategy that generates an image for locating scatterers according to the received Lamb waves. This paper presents a Lamb wave imaging method, which is formulated as a weighted structured sparse reconstruction problem. A dictionary is constructed by an analytical Lamb wave scattering model and an edge reflection prediction technique, which is used to decompose the experimental scattering signals under the constraint of weighted structured sparsity. The weights are generated from the correlation coefficients between the scattering signals and the predicted ones. Simulation and experimental results from an aluminum plate verify the effectiveness of the present method, which can generate images with sparse pixel values even with very limited number of sensors.

scholarly journals Lamb Waves Topological Imaging of Multiple Blind Defects in an Isotropic Plate

2019 ◽  
Vol 24 (2) ◽  
pp. 320-326 ◽  
Author(s):  
Wen-Fa Zhu ◽  
Hai-Yan Zhang Zhang ◽  
Meng-Yun Xu ◽  
Guo-Peng Fan
Keyword(s):  
Lamb Wave ◽  
Isotropic Plate ◽  
Lamb Waves ◽  
Mode Conversion ◽  
Image Resolution ◽  
Imaging Method ◽  
Wave Fields ◽  
Face To Face ◽  
Element Simulation ◽  
Reference Medium

The study investigates the feasibility of the Lamb wave topological imaging method for detecting multiple blindholes in an isotropic plate. The topological imaging method is performed based on the computations of two wave fields, a forward and an adjoint, in the defect-free reference medium using different emitting sources. The image is computed by multiplying the forward and adjoint wave fields together and integrating them over time or frequency. The interferences of multimode aliasing and the scattering effect can thus be eliminated at the defectfree positions with an improved image resolution. To investigate the physical mechanism, the refocusing process of the multimode Lamb waves at the defect positions is presented by a face-to-face comparison between the snapshots of the forward and adjoint wave fields using the finite element simulation. The Lamb wave topological imaging method is numerically and experimentally verified to identify multiple blind-holes in an isotropic aluminium plate. The results demonstrate that the topological imaging method enables the suppression of the sartefacts resulting from the mode conversion and achieve high-resolution imaging of the blind defects

scholarly journals Damage Identification of Large Generator Stator Insulation Based on PZT Sensor Systems and Hybrid Features of Lamb Waves

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2745 ◽  
Author(s):  
Ruihua Li ◽  
Hao Li ◽  
Bo Hu
Keyword(s):  
Power Systems ◽  
Lamb Wave ◽  
Damage Identification ◽  
Lamb Waves ◽  
Fem Simulation ◽  
Correlation Coefficients ◽  
Hybrid Features ◽  
Material Inhomogeneity ◽  
Time Frequency ◽  
Damage Imaging

Large generators are the principal pieces of equipment in power systems, and their operation reliability critically depends on the stator insulation. Damages in stator insulation will gradually lead to the failure and breakdown of generator. Due to the advantages of Lamb waves in Structural health monitoring (SHM), in this study, a distributed piezoelectric (PZT) sensor system and hybrid features of the Lamb waves are introduced to identify stator insulation damage of large generator. A hierarchical probability damage-imaging (PDI) algorithm is proposed to tackle the material inhomogeneity and anisotropy of the stator insulation. The proposed method includes three steps: global detection using correlation coefficients, local detection using Time of flight (ToF) along with the amplitude of damage-scattered Lamb wave, and final images fusion. Wavelet Transform was used to extract the ToF of Lamb wave in terms of the time-frequency domain. Finite Element Modeling (FEM) simulation and experimental work were carried out to identify four typical stator insulation damages for validation, including inner void, inner delamination, puncture, and crack. Results show that the proposed method can precisely identify the location of stator insulation damage, and the reconstruction image can be used to identify the size of stator insulation damage.

Thin-Plate Imaging Inspection Using Scattered Waves Cross-Correlation Algorithm and Non-Contact Air-Coupled Transducer

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Wenfeng Xiao ◽  
Lingyu Yu
Keyword(s):  
Lamb Wave ◽  
Cross Correlation ◽  
Lamb Waves ◽  
Imaging Technique ◽  
Laser Doppler Vibrometer ◽  
Correlation Method ◽  
Single Mode ◽  
Wave System ◽  
Wave Imaging ◽  
Incident Waves

Abstract This paper presents a non-contact air-coupled Lamb wave imaging technique using a two-dimensional (2D) cross-correlation method that not only detects the damage but also precisely quantifies for orientations and sizes. The air-coupled transducers (ACT) is used together with a scanning laser Doppler vibrometer (SLDV) for sensing, making a fully non-contact Lamb wave system used for this study. We first show that single-mode Lamb wave actuation can be achieved by the ACT-based on Snell's law. Detailed study and characterization of the directional ACT Lamb waves are conducted. For damage detection, a 2D cross-correlation imaging technique that uses the damage introduced scattered waves of all directions is proposed for correlating with the incident waves. The frequency-wavenumber filtering technique is used to implement the acquisition of the scatted waves and incident waves, respectively. In the end application to notches with various orientations and various sizes in terms of depth and length is given. The results show the proposed technique can precisely imaging the damages and can quantitatively evaluate the damage size in terms of length and depth.

Numerical and experimental investigation of damage severity estimation using Lamb wave–based imaging methods

2018 ◽  
Vol 30 (4) ◽  
pp. 618-635 ◽  
Author(s):  
Asaad Migot ◽  
Yeasin Bhuiyan ◽  
Victor Giurgiutiu
Keyword(s):  
Lamb Wave ◽  
Lamb Waves ◽  
Wave Interaction ◽  
Crack Size ◽  
Imaging Method ◽  
Size Estimation ◽  
Local Approach ◽  
Imaging Methods ◽  
Imaging Results ◽  
Scattering Wave

In this article, estimation of crack size, shape, and orientation was investigated numerically and experimentally using Lamb waves. A hybrid global–local approach was used in conjunction with the imaging methods for the numerical simulation. The hybrid global–local approach allowed fast and efficient prediction of scattering wave signals for Lamb wave interaction with crack from various incident directions. The simulation results showed the directionality effect of the scattering wave signals and suggested an optimum transmitter–sensor configuration. Two imaging methods were used: one involves the synthetic time reversal concept and the other involves Gaussian distribution function. Both imaging methods show very good agreement during simulations. Experiments were designed and conducted based on the simulated results. A network of eight piezoelectric wafer active sensors was used to capture the scattering waves from the crack. Both the pitch-catch and pulse-echo experimental modes were used. The directionality effect of incident Lamb waves on the imaging results was studied. The effect of summation, multiplication, and combined algorithms for each imaging method was studied. It was found that both methods can successfully predict the crack size and orientation. An attempt was made to use these imaging methods for detecting and sizing smaller sized damage (1- to 3-mm-diameter hole). It was found that these methods can successfully localize the hole, but size estimation was a bit challenging because of the smaller dimensions. The scattering waves for various hole sizes were studied.

scholarly journals Lamb wave generation using nanosecond laser ablation to detect damage

2017 ◽  
Vol 24 (24) ◽  
pp. 5842-5853 ◽  
Author(s):  
Naoki Hosoya ◽  
Ryosuke Umino ◽  
Atsushi Kanda ◽  
Itsuro Kajiwara ◽  
Atsushi Yoshinaga
Keyword(s):  
Laser Ablation ◽  
Damage Detection ◽  
Lamb Wave ◽  
Lamb Waves ◽  
Wave Generation ◽  
Nanosecond Laser ◽  
Large Area ◽  
Contact Damage ◽  
Contact Type ◽  
Aluminum Alloy 2024

This paper proposes a non-contact damage detection method based on Lamb waves generated by laser ablation (LA). Previously, Lamb waves generated by contact-type sensors such as acoustic emission or piezoelectric zirconate titanate devices have been studied to detect damage. Lamb wave generation systems with embedded contact-type excitation devices to objective structures to be inspected may quickly realize large-area damage detection on a huge object such as an aircraft. However, replacing contact-type devices with non-contact devices in Lamb wave generation systems, the systems will have sufficient potential to excite under the specific conditions such as submerged target structures in liquid and high-temperature substances. The LA-generated Lamb waves that have amplitudes several hundred times larger than those generated by conventional laser-thermoelastically generated Lamb waves are of advantage from the viewpoint of the signal-to-noise ratio in the measurements. When the laser fluence reaches 1012–1014 W/m2, which is greater than that for laser-thermoelastic regime, a LA regime is induced. The amplitudes of the LA-generated Lamb waves might be higher than those of the laser-thermoelastically generated Lamb waves; this is within the scope of the assumption. Since the LA process entails a number of nonlinear processes such as melting, vaporization, and sublimation, it is important to confirm that LA could generate a Lamb wave and its mode. In this paper, Lamb waves that contain broadband frequency elements of more than several hundred kHz are generated by non-contact impulse excitation using LA, which is common in vibration tests in the high-frequency range, laser peening, propulsion of micro-aircraft, bolt loosening diagnosis, etc. The present method is evaluated by comparing the measured and calculated propagation phase and group velocities of the Lamb waves. Furthermore, the feasibility of our approach is demonstrated by non-contact damage detection against an aluminum alloy 2024 plate with a crack.

scholarly journals Time-Domain Topological Energy Imaging Method of Concrete Cavity Defect by Lamb Wave

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Wen-Fa Zhu ◽  
Wei Shao ◽  
Le-Le Peng ◽  
Guo-Peng Fan ◽  
Xing-Jie Chen ◽  
...  
Keyword(s):  
Time Domain ◽  
Lamb Wave ◽  
Wave Dispersion ◽  
Imaging Method ◽  
Sound Fields ◽  
Wave Imaging ◽  
Reference Medium ◽  
Synthetic Aperture Focusing ◽  
Synthetic Aperture Focusing Technique ◽  
Defect Imaging

This paper presents an ultrasonic Lamb wave imaging method based on time-domain topological energy to address artifacts in the results of traditional ultrasound imaging methods. This method is based on topological theory and the calculation of the direct and adjoint sound fields in a defect-free reference medium. It focuses the direct and adjoint sound fields at the cavity defect using time reversal and their time-domain topological energy as the pixel values of the image to reduce the artifacts. The physical mechanism of time-domain topological energy (TDTE) imaging is revealed by finite element simulation and experiment. The feasibility of this method for multilayer concrete cavity defect imaging is verified. Compared with the traditional synthetic aperture focusing technique (SAFT) imaging method, the numerical simulation and experimental results show that the method can overcome the influence of ultrasonic Lamb wave dispersion and locate cavity defects with high accuracy and few artifacts. These features indicate the potential of the method in imaging damage concrete structures.

Damage imaging that exploits multipath scattered Lamb waves

2019 ◽  
Vol 19 (6) ◽  
pp. 1629-1644 ◽  
Author(s):  
Liang Zeng ◽  
Liping Huang ◽  
Zhi Luo ◽  
Jing Lin
Keyword(s):  
Lamb Waves ◽  
Propagation Path ◽  
Imaging Method ◽  
Reinforced Polymer ◽  
Direct Scattering ◽  
Gaussian Distribution Function ◽  
Individual Wave ◽  
Damage Imaging ◽  
Wave Imaging ◽  
Polymer Laminates

This article presents a multipath Lamb wave imaging method that leverages the extra reflections present in the recorded ultrasonic waveforms for structural prognosis. Under the ray acoustic approximation, an edge behaves like a mirror, which changes the propagation path of a wave and provides more views of the damage than can be obtained from direct scattering. To accommodate for these extra reflections, the scattering path of each wave in the residual signal is simplified as a direct scattering path from an actual or virtual transmitter (created by edge mirroring) to the damage, and then back to an actual or virtual receiver (created by edge mirroring). On this basis, the Gaussian distribution function is introduced to quantify the probabilities at each spatial node in relation to all possible damage loci. Through fusing the images obtained from all individual wave packets, the structure could be inspected with far fewer transducers compared to conventional elliptical imaging. Experimental results from carbon fiber-reinforced polymer laminates and aluminum plate are provided to illustrate the effectiveness of the imaging method, where damage is correctly detected and accurately localized even with a single transmitter–receiver pair.

Multi-defect detection based on ultrasonic Lamb wave sign phase coherence factor imaging method

2021 ◽  
Vol 63 (11) ◽  
pp. 659-666
Author(s):  
Meng-Ke Zhang ◽  
Guo-Peng Fan ◽  
Wen-Fa Zhu ◽  
Shu-Bin Zheng ◽  
Xiao-Dong Chai ◽  
...  
Keyword(s):  
Lamb Wave ◽  
Performance Indicator ◽  
Signal To Noise Ratio ◽  
Scattered Signal ◽  
Imaging Method ◽  
Signal To Noise ◽  
Full Matrix ◽  
Wave Imaging ◽  
Array Performance ◽  
Scattering Signal

The ultrasonic Lamb wave total focusing method (TFM) only uses the amplitude of the defective scattered signal for virtual focused imaging, while ignoring the phase information of the scattered signal and the dispersion characteristics of the Lamb wave, resulting in low imaging resolution and easily produced artefacts in imaging. To solve this problem, an ultrasonic Lamb wave imaging method based on phase coherence is proposed in this paper and the sign coherence factor (SCF) in the full matrix scattering signal is extracted. Moreover, the method uses the SCF to weight the amplitude of the full matrix scattering signal, suppresses the side lobes of the defect echo signal and the Lamb wave dispersion effect, improves the ultrasonic Lamb wave imaging resolution and weakens the artefacts. Finally, single- and multiplehole defects in aluminium plates are detected for experimental validation using an ultrasonic phased array. The array performance indicator and signal-to-noise ratio are used as indicators for quantitative assessment of imaging performance. The results show that compared with the TFM imaging, the SCF imaging can effectively suppress the noise and scattered signal side lobes, improve the array performance indicator (API) by 69.1% and improve the signal-to-noise ratio (SNR) by 73.9%. In addition, the SCF imaging can effectively weaken the interference of scattered signals between multiple through-hole defects, resulting in fewer artefacts in imaging.

A SAFT algorithm for lamb wave imaging of isotropic plate-like structures

Ultrasonics ◽  
2002 ◽  
Vol 39 (7) ◽  
pp. 487-494 ◽  
Author(s):  
René Sicard ◽  
Jacques Goyette ◽  
Djamel Zellouf
Keyword(s):  
Lamb Wave ◽  
Isotropic Plate ◽  
Wave Imaging

Lamb wave imaging with actuator network for damage quantificationin aluminum plate structures

2020 ◽  
pp. 1045389X2095253
Author(s):  
Zhaoyun Ma ◽  
Lingyu Yu
Keyword(s):  
Lamb Wave ◽  
Lamb Waves ◽  
Laser Doppler Vibrometer ◽  
Inspection System ◽  
Synthetic Image ◽  
Target Area ◽  
Time Space ◽  
Wave Imaging ◽  
Triangular Profile ◽  
Aluminum Plates

Lamb waves have been widely used for damage detection on plate-like structures. However, there are still considerable interests on quantifying damage with complex profile. In this article, quantification of complex damage in plate-like structures using a network of actuators and time-space Lamb wavefield is investigated. The actuator network inspection system is implemented with multiple PZT transducers for Lamb wave actuation in round robin pattern and scanning laser Doppler vibrometer for wavefield sensing. The PZT network is arranged in a way that the target area is fully enclosed and Lamb waves come to the damage from all directions. Waves induced by the damage are subsequently obtained through frequency-wavenumber filtering, using the experimentally acquired dispersion curves presented in the paper. The filtered waves from all wave actuators are then used to generate a synthetic image of the damage being inspected. Two cases of complex damage are evaluated on aluminum plates, mass loss with triangular profile and mass addition with a three-letter cluster profile. Our results show that the damages are not only detected but also their profiles are clearly outlined in the images. We believe the subject methods provide improved evaluation of damage profile for Lamb wavefield based damage quantification.

Sign in / Sign up

Export Citation Format

Share Document