scholarly journals Physics-Based Device Models and Progress Review for Active Piezoelectric Semiconductor Devices

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3872
Author(s):  
Hongseok Oh ◽  
Shadi A. Dayeh
Keyword(s):  
Mechanical Energy ◽  
Three Dimensional ◽  
Electrical Energy ◽  
Piezoelectric Response ◽  
Crystalline Materials ◽  
One Dimensional ◽  
Two Dimensional Materials ◽  
Transduction Mechanisms ◽  
Piezoelectric Devices ◽  
And Robotics

Piezoelectric devices transduce mechanical energy to electrical energy by elastic deformation, which distorts local dipoles in crystalline materials. Amongst electromechanical sensors, piezoelectric devices are advantageous because of their scalability, light weight, low power consumption, and readily built-in amplification and ability for multiplexing, which are essential for wearables, medical devices, and robotics. This paper reviews recent progress in active piezoelectric devices. We classify these piezoelectric devices according to the material dimensionality and present physics-based device models to describe and quantify the piezoelectric response for one-dimensional nanowires, emerging two-dimensional materials, and three-dimensional thin films. Different transduction mechanisms and state-of-the-art devices for each type of material are reviewed. Perspectives on the future applications of active piezoelectric devices are discussed.

scholarly journals Space Thermoacoustic Radioisotopic Power System, SpaceTRIPS: The Magnetohydrodynamic Generator

2021 ◽  
Vol 13 (23) ◽  
pp. 13498
Author(s):  
Arturs Brekis ◽  
Antoine Alemany ◽  
Olivier Alemany ◽  
Augusto Montisci
Keyword(s):  
Fluid Dynamic ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Electricity Production ◽  
One Dimensional ◽  
Mhd Generator ◽  
Deep Space Exploration ◽  
Stage System ◽  
Characteristic Values ◽  
Eu Project

Electricity production is a major problem for deep space exploration. The possibility of using radioisotope elements with a very long life as an energy source was investigated in the framework of an EU project “SpaceTRIPS”. For this, a two-stage system was tested, the first in which thermal energy is converted into mechanical energy by means of a thermoacoustic process, and the second where mechanical energy is converted into electrical energy by means of a magnetohydrodynamic generator (MHD). The aim of the present study is to develop an analytical model of the MHD generator. A one-dimensional model is developed and presented that allows us to evaluate the behavior of the device as regards both electromagnetic and fluid-dynamic aspects, and consequently to determine the characteristic values of efficiency and power.

CLASSICAL LIMIT PROBLEM OF QUANTUM MECHANICAL ENERGY EIGENFUNCTIONS — EXTENSION TO TWO- AND THREE-DIMENSIONAL CASES

2005 ◽  
Vol 20 (32) ◽  
pp. 7515-7524 ◽  
Author(s):  
D. SEN ◽  
S. SENGUPTA
Keyword(s):  
Classical Limit ◽  
Bound States ◽  
Mechanical Energy ◽  
Three Dimensional ◽  
Limit Problem ◽  
Quantum Mechanical ◽  
One Dimensional ◽  
Special Cases ◽  
Objective Description ◽  
Quantum Mechanical Energy

In an earlier paper appropriate limiting procedure is discussed in a general way for quantum mechanical energy eigenfunctions (one-dimensional bound states) — a single interpretational postulate leading smoothly to entire compatible classical objective description without facing any contradiction. The method is consistently extended to two- and three-dimensional cases and it is interesting to note that results of earlier study on the classical limit of the radial distribution function of hydrogen atom are easily obtained as special cases of our analysis.

scholarly journals Thermomechanical Effects on Electrical Energy Harvested from Laminated Piezoelectric Devices

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 141
Author(s):  
Pornrawee Thonapalin ◽  
Sontipee Aimmanee ◽  
Pitak Laoratanakul ◽  
Raj Das
Keyword(s):  
Elevated Temperature ◽  
Energy Harvesting ◽  
Electromechanical Coupling ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Piezoelectric Sensor ◽  
Electrical Energy ◽  
Piezoelectric Devices ◽  
Thermomechanical Effects

Piezoelectric materials are used to harvest ambient mechanical energy from the environment and supply electrical energy via their electromechanical coupling property. Amongst many intensive activities of energy harvesting research, little attention has been paid to study the effect of the environmental factors on the performance of energy harvesting from laminated piezoelectric materials, especially when the temperature in the operating condition is different from the room temperature. In this work, thermomechanical effects on the electrical energy harvested from a type of laminated piezoelectric devices, known as thin layer unimorph ferroelectric driver (called THUNDER) were investigated. Three configurations of THUNDER devices were tested in a controlled temperature range of 30–80 °C. The THUNDER devices were pushed by using a cam mechanism in order to generate required displacements and frequencies. The experimental results exhibited a detrimental effect of the elevated temperature on the generated voltage and the harvested electrical power. It is due to changes in residual stress and geometry. These results are advantageous for many applications of the THUNDER devices and for future design of a new laminated piezoelectric sensor and energy harvester in an elevated temperature environment.

Structure and function of neural networks in the retina

1988 ◽  
Vol 46 ◽  
pp. 26-27
Author(s):  
Peter Sterling
Keyword(s):  
Ganglion Cells ◽  
Three Dimensional ◽  
Structure And Function ◽  
Synaptic Connections ◽  
Visual Axis ◽  
One Dimensional ◽  
Cat Retina ◽  
Ultrathin Sections ◽  
And Function ◽  
Insight Into

The synaptic connections in cat retina that link photoreceptors to ganglion cells have been analyzed quantitatively. Our approach has been to prepare serial, ultrathin sections and photograph en montage at low magnification (˜2000X) in the electron microscope. Six series, 100-300 sections long, have been prepared over the last decade. They derive from different cats but always from the same region of retina, about one degree from the center of the visual axis. The material has been analyzed by reconstructing adjacent neurons in each array and then identifying systematically the synaptic connections between arrays. Most reconstructions were done manually by tracing the outlines of processes in successive sections onto acetate sheets aligned on a cartoonist's jig. The tracings were then digitized, stacked by computer, and printed with the hidden lines removed. The results have provided rather than the usual one-dimensional account of pathways, a three-dimensional account of circuits. From this has emerged insight into the functional architecture.

Exploring the Multidimensional Facets of Authoritarianism: Authoritarian Aggression and Social Dominance Orientation

2008 ◽  
Vol 67 (1) ◽  
pp. 51-60 ◽  
Author(s):  
Stefano Passini
Keyword(s):  
Social Dominance ◽  
Factor Model ◽  
Three Dimensional ◽  
Social Dominance Orientation ◽  
Model Fit ◽  
Regression Analyses ◽  
One Dimensional ◽  
Confirmatory Factor ◽  
The One ◽  
Better Than

The relation between authoritarianism and social dominance orientation was analyzed, with authoritarianism measured using a three-dimensional scale. The implicit multidimensional structure (authoritarian submission, conventionalism, authoritarian aggression) of Altemeyer’s (1981, 1988) conceptualization of authoritarianism is inconsistent with its one-dimensional methodological operationalization. The dimensionality of authoritarianism was investigated using confirmatory factor analysis in a sample of 713 university students. As hypothesized, the three-factor model fit the data significantly better than the one-factor model. Regression analyses revealed that only authoritarian aggression was related to social dominance orientation. That is, only intolerance of deviance was related to high social dominance, whereas submissiveness was not.

Reduction of structural vibrations with the piezoelectric stacks ring

2020 ◽  
Vol 64 (1-4) ◽  
pp. 729-736
Author(s):  
Jincheng He ◽  
Xing Tan ◽  
Wang Tao ◽  
Xinhai Wu ◽  
Huan He ◽  
...  
Keyword(s):  
Vibration Control ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibrations ◽  
Rotor Systems ◽  
Fea Model ◽  
Piezoelectric Stacks ◽  
Shunt Damping ◽  
Reduction Effect ◽  
Euler Bernoulli Beam

It is known that piezoelectric material shunted with external circuits can convert mechanical energy to electrical energy, which is so called piezoelectric shunt damping technology. In this paper, a piezoelectric stacks ring (PSR) is designed for vibration control of beams and rotor systems. A relative simple electromechanical model of an Euler Bernoulli beam supported by two piezoelectric stacks shunted with resonant RL circuits is established. The equation of motion of such simplified system has been derived using Hamilton’s principle. A more realistic FEA model is developed. The numerical analysis is carried out using COMSOL® and the simulation results show a significant reduction of vibration amplitude at the specific natural frequencies. Using finite element method, the influence of circuit parameters on lateral vibration control is discussed. A preliminary experiment of a prototype PSR verifies the PSR’s vibration reduction effect.

Sign in / Sign up

Export Citation Format

Share Document