scholarly journals Space Thermoacoustic Radioisotopic Power System, SpaceTRIPS: The Magnetohydrodynamic Generator

2021 ◽  
Vol 13 (23) ◽  
pp. 13498
Author(s):  
Arturs Brekis ◽  
Antoine Alemany ◽  
Olivier Alemany ◽  
Augusto Montisci
Keyword(s):  
Fluid Dynamic ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Electricity Production ◽  
One Dimensional ◽  
Mhd Generator ◽  
Deep Space Exploration ◽  
Stage System ◽  
Characteristic Values ◽  
Eu Project

Electricity production is a major problem for deep space exploration. The possibility of using radioisotope elements with a very long life as an energy source was investigated in the framework of an EU project “SpaceTRIPS”. For this, a two-stage system was tested, the first in which thermal energy is converted into mechanical energy by means of a thermoacoustic process, and the second where mechanical energy is converted into electrical energy by means of a magnetohydrodynamic generator (MHD). The aim of the present study is to develop an analytical model of the MHD generator. A one-dimensional model is developed and presented that allows us to evaluate the behavior of the device as regards both electromagnetic and fluid-dynamic aspects, and consequently to determine the characteristic values of efficiency and power.

scholarly journals Physics-Based Device Models and Progress Review for Active Piezoelectric Semiconductor Devices

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3872
Author(s):  
Hongseok Oh ◽  
Shadi A. Dayeh
Keyword(s):  
Mechanical Energy ◽  
Three Dimensional ◽  
Electrical Energy ◽  
Piezoelectric Response ◽  
Crystalline Materials ◽  
One Dimensional ◽  
Two Dimensional Materials ◽  
Transduction Mechanisms ◽  
Piezoelectric Devices ◽  
And Robotics

Piezoelectric devices transduce mechanical energy to electrical energy by elastic deformation, which distorts local dipoles in crystalline materials. Amongst electromechanical sensors, piezoelectric devices are advantageous because of their scalability, light weight, low power consumption, and readily built-in amplification and ability for multiplexing, which are essential for wearables, medical devices, and robotics. This paper reviews recent progress in active piezoelectric devices. We classify these piezoelectric devices according to the material dimensionality and present physics-based device models to describe and quantify the piezoelectric response for one-dimensional nanowires, emerging two-dimensional materials, and three-dimensional thin films. Different transduction mechanisms and state-of-the-art devices for each type of material are reviewed. Perspectives on the future applications of active piezoelectric devices are discussed.

Reduction of structural vibrations with the piezoelectric stacks ring

2020 ◽  
Vol 64 (1-4) ◽  
pp. 729-736
Author(s):  
Jincheng He ◽  
Xing Tan ◽  
Wang Tao ◽  
Xinhai Wu ◽  
Huan He ◽  
...  
Keyword(s):  
Vibration Control ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibrations ◽  
Rotor Systems ◽  
Fea Model ◽  
Piezoelectric Stacks ◽  
Shunt Damping ◽  
Reduction Effect ◽  
Euler Bernoulli Beam

It is known that piezoelectric material shunted with external circuits can convert mechanical energy to electrical energy, which is so called piezoelectric shunt damping technology. In this paper, a piezoelectric stacks ring (PSR) is designed for vibration control of beams and rotor systems. A relative simple electromechanical model of an Euler Bernoulli beam supported by two piezoelectric stacks shunted with resonant RL circuits is established. The equation of motion of such simplified system has been derived using Hamilton’s principle. A more realistic FEA model is developed. The numerical analysis is carried out using COMSOL® and the simulation results show a significant reduction of vibration amplitude at the specific natural frequencies. Using finite element method, the influence of circuit parameters on lateral vibration control is discussed. A preliminary experiment of a prototype PSR verifies the PSR’s vibration reduction effect.

scholarly journals HF Radars for Wave Energy Resource Assessment Offshore NW Spain

2021 ◽  
Vol 13 (11) ◽  
pp. 2070
Author(s):  
Ana Basañez ◽  
Vicente Pérez-Muñuzuri
Keyword(s):  
Wave Energy ◽  
Numerical Models ◽  
Wave Spectrum ◽  
Energy Resource ◽  
Electrical Energy ◽  
Resource Assessment ◽  
Electricity Production ◽  
Statistical Validation ◽  
Wave Energy Converters ◽  
Energy Converters

Wave energy resource assessment is crucial for the development of the marine renewable industry. High-frequency radars (HF radars) have been demonstrated to be a useful wave measuring tool. Therefore, in this work, we evaluated the accuracy of two CODAR Seasonde HF radars for describing the wave energy resource of two offshore areas in the west Galician coast, Spain (Vilán and Silleiro capes). The resulting wave characterization was used to estimate the electricity production of two wave energy converters. Results were validated against wave data from two buoys and two numerical models (SIMAR, (Marine Simulation) and WaveWatch III). The statistical validation revealed that the radar of Silleiro cape significantly overestimates the wave power, mainly due to a large overestimation of the wave energy period. The effect of the radars’ data loss during low wave energy periods on the mean wave energy is partially compensated with the overestimation of wave height and energy period. The theoretical electrical energy production of the wave energy converters was also affected by these differences. Energy period estimation was found to be highly conditioned to the unimodal interpretation of the wave spectrum, and it is expected that new releases of the radar software will be able to characterize different sea states independently.

scholarly journals Marine current energy assessment and the hydrodynamic design of the hydrokinetic turbine for the Moroccan Mediterranean Coast

2021 ◽  
pp. 014459872098662
Author(s):  
Salma Hazim ◽  
Abdelouahab Salih ◽  
Mourad Taha Janan ◽  
Ahmed El Ouatouati ◽  
Abdellatif Ghennioui
Keyword(s):  
Electrical Energy ◽  
Mediterranean Coast ◽  
Electricity Production ◽  
Blade Element Theory ◽  
Hydrokinetic Turbine ◽  
Marine Current ◽  
Current Resource ◽  
Suitable Area ◽  
The Impact ◽  
Current Energy

Generating electricity through renewable energies is growing increasingly to reduce the huge demand on electricity and the impact of fossil energies on the environment, the most common sources forms used are: the wind, the sun, the photovoltaic and the thermal, without forgetting hydropower by the bays of dams. Fortunately, 70% of our planet is covered by the seas and oceans, this area constitutes a huge potential for electricity production to be exploited. The scientific advances of recent years allow a better exploitation of these resources especially the marine current due to its reliability and predictability. The marine current energy is extracted using a hydrokinetic turbine (HKT) which transform the kinetic energy of water into an electrical energy. The exploitation of this resource needs in the first step the assessment of marine currents in the study area for implementing the HKT, and the second step is designing an adequate technology. The main goal of this study is the assessment of the marine current resource on the Moroccan Mediterranean coast to evaluate the suitable area to implement the HKT, and to determine the marine current speed intensities at different depths. As well as, to estimate an average potential existing in the site. Moreover, we will conduct a study based on the results of the assessment that was made to design a horizontal axis marine current turbine (HAMCT). Two hydrofoil profile were considered to design a HAMCT using the Blade Element Theory (BEM) and calculating their performances adapted to the site conditions Naca4415 and s8052. In addition, a comparison was made between this two HAMCT hydrofoil profile for deciding the best one for implementing in the studied area.

Analysis of Heat, Mass, and Momentum Transfer in the Rain Zone of Counterflow Cooling Towers

1999 ◽  
Vol 121 (4) ◽  
pp. 751-755 ◽  
Author(s):  
E. de Villiers ◽  
D. G. Kro¨ger
Keyword(s):  
Momentum Transfer ◽  
Cooling Tower ◽  
Mechanical Energy ◽  
Performance Evaluations ◽  
Cooling Towers ◽  
Droplet Deformation ◽  
One Dimensional ◽  
Mechanical Energy Loss ◽  
Simplifying Assumptions ◽  
Semi Empirical

The rate of heat, mass, and momentum transfer in the rain zone of three counterflow cooling tower geometries is analyzed using simplifying assumptions and numerical integration. The objective of the analysis is to generate equations for use in a one-dimensional mathematical cooling tower performance evaluations. Droplet deformation is taken into account and momentum transfer is calculated from the air flow’s mechanical energy loss, caused by air-droplet interaction. A comparison of dimensionless semi-empirical equations and experimental data demonstrates the method’s capability to predict the pressure drop in a counterflow rain zone.

scholarly journals Feasibility study of power generation using a turbine mounted in aircraft wing

2018 ◽  
Vol 7 (2-1) ◽  
pp. 433
Author(s):  
K. Sri Vamsi Krishna ◽  
Shiva Prasad ◽  
R. Sabari Vihar ◽  
K. Babitha ◽  
K Veeranjaneyulu ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Power Systems ◽  
Free Stream ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Aircraft Wing ◽  
Aerodynamic Efficiency ◽  
Turbulent Reynolds Number ◽  
Main Motive ◽  
Emergency Power

The main objective of this study is to increase the aerodynamic efficiency of turbine mounted novel wing. The main motive behind this work is to reduce the drag by attaining the positive velocity gradient and generate power by converting the stagnation pressure which also acts as emergency power source. By using the energy source of free stream air, Mechanical energy is converted into electrical energy. The obtained power is presented in terms of voltage generated at various angles of attack with different Reynolds number. Experimental analysis is carried out for NACA4415 airfoil at various angles with respect to free stream ranging from 0deg to 30deg from laminar to turbulent Reynolds number. The results were obtained using the research tunnel at IARE aerodynamic facility center. The aerodynamic advantage of this design in terms of voltage is 9.5 V at 35m/s which can be utilized for the aircraft on board power systems.

EXPERIMENTAL STUDY OF BIOELECTRICITY-MICROBIAL FUEL CELL FOR ELECTRICITY GENERATION: PERFORMANCE CHARACTERIZATION AND CAPACITY IMPROVEMENT

2017 ◽  
Vol 79 (5-2) ◽  
Author(s):  
Zul Hasrizal Bohari ◽  
Nur Asyhikin Azhari ◽  
Nuraina Nasuha Ab Rahman ◽  
Mohamad Faizal Baharom ◽  
Mohd Hafiz Jali ◽  
...  
Keyword(s):  
Organic Matter ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electrical Power ◽  
Electrical Energy ◽  
Sewage Water ◽  
Electricity Production ◽  
Sample Type ◽  
Series Of Experiments ◽  
The Right

Energy trending lately shown the need of new possible renewable energy. This paper studies about the capability and capacity generating of electricity by using Bio-electricity-Microbial Fuel Cell (Bio-MFC). Bio-MFC is the device that converts chemical energy to electrical energy by using microbes that exist in the sewage water. The energy contained in organic matter can be converted into useful electrical power. MFC can be operated by microbes that transfer electrons from anode to cathode for generating electricity. There are two major goals in this study. The first goal is to determine the performance characteristics of MFCs in this application. Specifically we investigate the relationship between the percentages of organic matter in a sample results in higher electricity production of MFCs power by that sample. As a result, the sewage (wastewater) chosen in the second series experiment because the sewage (wastewater) also produced the highest percentage of organic matter which is around 10%. Due to these, the higher percentage of organic matter corresponds to higher electricity production. The second goal is to determine the condition under which MFC work most efficiently to generating electricity. After get the best result of the combination for the electrode, which is combination of zinc and copper (900mV),the third series of experiments was coducted, that show the independent variable was in the ambient temperature. The reasons of these observations will be explained throughout the paper. The study proved that the electricity production of MFC can be increased by selecting the right condition of sample type, temperature and type of electrode. 

Improving a one-dimensional centrifugal compressor performance prediction method

2005 ◽  
Vol 219 (8) ◽  
pp. 653-659 ◽  
Author(s):  
E Swain
Keyword(s):  
Centrifugal Compressor ◽  
Performance Prediction ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Prediction Method ◽  
Compressor Cascade ◽  
One Dimensional ◽  
Compressor Performance ◽  
Cfd Analyses

A one-dimensional centrifugal compressor performance prediction technique that has been available for some time is updated as a result of extracting the component performance from three-dimensional computational fluid dynamic (CFD) analyses. Confidence in the CFD results is provided by comparison of overall performance for one of the compressor examples. The extracted impeller characteristic is compared with the original impeller loss model, and this indicated that some improvement was desirable. The position of least impeller loss was determined using a traditional axial compressor cascade method, and suitable algebraic expressions were derived to match the CFD data. The merit of the approach lies with the relative ease that CFD component performance currently can be achieved and adjusting one-dimensional methods to agree with the CFD-derived models.

Sign in / Sign up

Export Citation Format

Share Document