scholarly journals Simulation and Optimization of SNAP-Taper Coupling System in Displacement Sensing

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 2947
Author(s):  
Jian Chen ◽  
Yongchao Dong ◽  
Han Wang ◽  
Penghui Sun ◽  
Xueliang Zeng
Keyword(s):  
High Sensitivity ◽  
Resonance Wavelength ◽  
Displacement Sensor ◽  
Sensitivity Threshold ◽  
Simulation And Optimization ◽  
Sensing Applications ◽  
Coupling System ◽  
Surface Plot ◽  
Wide Range ◽  
Coupling Parameters

Sensing applications based on whispering gallery mode (WGM) microcavities have attracted extensive attention recently, especially in displacement sensing applications. However, the traditional displacement sensing scheme based on shift in a single resonance wavelength, has a lot of drawbacks. Herein, a novel displacement sensing scheme based on the surface nanoscale axial photonics (SNAP) is proposed to achieve a wide range and high-resolution displacement sensor through analyzing the transmittance of multiple axial modes. By analyzing the surface plot of the resonance spectrum with different coupling positions, the ideal coupling parameters and ERV for displacement sensing are obtained. In the following, displacement sensing with high sensitivity and a wide range is theoretically realized through adjusting the sensitivity threshold and the number of modes. Finally, we present our views on the current challenges and the future development of the displacement sensing based on an SNAP resonator. We believe that a comprehensive understanding on this sensing scheme would significantly contribute to the advancement of the SNAP resonator for a broad range of applications.

Fabrication, Characterization and Microsensing of Whispering-Gallery Mode Micro-Coupling Systems

2008 ◽  
Author(s):  
Qiulin Ma ◽  
Tobias Rossmann ◽  
Zhixiong Guo
Keyword(s):  
Transmission Loss ◽  
Coupling Efficiency ◽  
High Sensitivity ◽  
Single Mode ◽  
Whispering Gallery Mode ◽  
Single Mode Fiber ◽  
Whispering Gallery ◽  
Coupling System ◽  
Wide Range ◽  
Micro Sensor

An optical micro-coupling system of whispering-gallery mode usually consists of a resonator (e.g. a sphere) and a coupler (e.g. a taper). In this report, silica microspheres of 50–500 μm in diameter are fabricated by hydrogen flame fusing of an end of a single mode fiber or fiber taper. Fiber tapers are fabricated by the method of heating and pulling that meets an adiabatic condition. Taper’s waist diameter can routinely be made less than 1 μm and almost zero transmission loss in a taper is achieved which allows an effective and phase-matched coupling for a wide range sizes of microspheres. Both resonators and couplers’ surface microstructure and shapes are examined by scanning electronic microscopy. Three regimes of coupling are achieved, enabling a good flexibility to control Q value and coupling efficiency of a micro-coupling system. Whispering gallery mode shift is used to demonstrate a novel temperature micro-sensor. Its sensitivity determined from actual experimental results agrees well with the theoretical value. A concept of using the photon’s cavity ring down (CRD) in the microsphere to make a novel high-sensitivity trace gas micro-sensor is proposed. The CRD time constant when ammonia is chosen as the analyte gas is predicted using the simulated absorption lines.

scholarly journals Graphene and its Derivatives-Based Optical Sensors

2021 ◽  
Vol 9 ◽  
Author(s):  
Xiao-Guang Gao ◽  
Ling-Xiao Cheng ◽  
Wen-Shuai Jiang ◽  
Xiao-Kuan Li ◽  
Fei Xing
Keyword(s):  
Optical Sensors ◽  
Low Cost ◽  
High Sensitivity ◽  
Fast Response ◽  
Cell Detection ◽  
Single Cell Detection ◽  
Sensing Applications ◽  
Wide Range ◽  
Surface Enhanced Raman ◽  
Recent Developments

Being the first successfully prepared two-dimensional material, graphene has attracted extensive attention from researchers due to its excellent properties and extremely wide range of applications. In particular, graphene and its derivatives have displayed several ideal properties, including broadband light absorption, ability to quench fluorescence, excellent biocompatibility, and strong polarization-dependent effects, thus emerging as one of the most popular platforms for optical sensors. Graphene and its derivatives-based optical sensors have numerous advantages, such as high sensitivity, low-cost, fast response time, and small dimensions. In this review, recent developments in graphene and its derivatives-based optical sensors are summarized, covering aspects related to fluorescence, graphene-based substrates for surface-enhanced Raman scattering (SERS), optical fiber biological sensors, and other kinds of graphene-based optical sensors. Various sensing applications, such as single-cell detection, cancer diagnosis, protein, and DNA sensing, are introduced and discussed systematically. Finally, a summary and roadmap of current and future trends are presented in order to provide a prospect for the development of graphene and its derivatives-based optical sensors.

scholarly journals Sensitivity Enhancement of Curvature Fiber Sensor Based on Polymer-Coated Capillary Hollow-Core Fiber

Sensors ◽  
2020 ◽  
Vol 20 (13) ◽  
pp. 3763 ◽  
Author(s):  
Luis A. Herrera-Piad ◽  
Iván Hernández-Romano ◽  
Daniel A. May-Arrioja ◽  
Vladimir P. Minkovich ◽  
Miguel Torres-Cisneros
Keyword(s):  
Fiber Optic ◽  
High Sensitivity ◽  
Single Mode ◽  
Cost Effective ◽  
Fiber Optic Sensor ◽  
Hollow Core ◽  
Sensing Applications ◽  
Optic Sensor ◽  
Wide Range ◽  
Core Fiber

In this paper, we propose and experimentally demonstrate a simple technique to enhance the curvature sensitivity of a bending fiber optic sensor based on anti-resonant reflecting optical waveguide (ARROW) guidance. The sensing structure is assembled by splicing a segment of capillary hollow-core fiber (CHCF) between two single-mode fibers (SMF), and the device is set on a steel sheet for measuring different curvatures. Without any surface treatment, the ARROW sensor exhibits a curvature sensitivity of 1.6 dB/m−1 in a curvature range from 0 to 2.14 m−1. By carefully coating half of the CHCF length with polydimethylsiloxane (PDMS), the curvature sensitivity of the ARROW sensor is enhanced to −5.62 dB/m−1, as well as an increment in the curvature range (from 0 to 2.68 m−1). Moreover, the covered device exhibits a low-temperature sensitivity (0.038 dB/°C), meaning that temperature fluctuations do not compromise the bending fiber optic sensor operation. The ARROW sensor fabricated with this technique has high sensitivity and a wide range for curvature measurements, with the advantage that the technique is cost-effective and easy to implement. All these features make this technique appealing for real sensing applications, such as structural health monitoring.

scholarly journals Method for Determining the Plasmon Resonance Wavelength in Fiber Sensors Based on Tilted Fiber Bragg Gratings

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4245 ◽  
Author(s):  
Egor Manuylovich ◽  
Kirill Tomyshev ◽  
Oleg V. Butov
Keyword(s):  
Plasmon Resonance ◽  
Spectral Characteristics ◽  
Fiber Bragg Gratings ◽  
Environmental Parameters ◽  
High Sensitivity ◽  
Bragg Gratings ◽  
Resonance Wavelength ◽  
Experimental Comparison ◽  
Spectral Position ◽  
Wide Range

Surface plasmon resonance-based fiber-optic sensors are of increasing interest in modern sensory research, especially for chemical and biomedical applications. Special attention deserves to be given to sensors based on tilted fiber Bragg gratings, due to their unique spectral properties and potentially high sensitivity and resolution. However, the principal task is to determine the plasmon resonance wavelength based on the spectral characteristics of the sensor and, most importantly, to measure changes in environmental parameters with high resolution, while the existing indirect methods are only useable in a narrow spectral range. In this paper, we present a new approach to solving this problem, based on the original method of determining the plasmon resonance spectral position in the automatic mode by precisely calculating the constriction location on the transmission spectrum of the sensor. We also present an experimental comparison of various data processing methods in both a narrow and a wide range of the refractive indexes. Application of our method resulted in achieving a resolution of up to 3 × 10−6 in terms of the refractive index.

High Sensitivity Temperature Sensor Based on Two-Dimensional Photonic Crystal

2021 ◽  
Author(s):  
Sapna Dinodiya ◽  
Bhuvneshwer Suthar ◽  
Anami Bhargava
Keyword(s):  
Photonic Crystal ◽  
Temperature Sensor ◽  
Photonic Band Gap ◽  
Base Material ◽  
High Sensitivity ◽  
Two Dimensional ◽  
Dimensional Photonic Crystal ◽  
Sensing Applications ◽  
Wide Range ◽  
Two Dimensional Photonic Crystal

In this work, a two-dimensional photonic crystal ring resonator based temperature sensor is investigated. The device consists of a hexagonal array of air holes surrounded by the base material of germanium (Ge). The sensing mechanism is based on the  shifting  of transmission peak with  refractive index changes in Ge induced  by variation  of temperature. Simulation results are obtained using finite difference time domain method (FDTD). The photonic band gap is studied by plane wave expansion method (PWE). The sensor has high sensitivity of 270 pm/K and high quality factor of 2028.86 with` wide range of temperature detection between 300 K to 800 K. The size of the structure is  112.91 (µm)2 and appropriate for sensing applications in nanotechnology.

scholarly journals Electrochemiluminescence Biosensors Using Screen-Printed Electrodes

Biosensors ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 118
Author(s):  
Emiliano Martínez-Periñán ◽  
Cristina Gutiérrez-Sánchez ◽  
Tania García-Mendiola ◽  
Encarnación Lorenzo
Keyword(s):  
Dna Analysis ◽  
Dynamic Range ◽  
Chemical Properties ◽  
High Sensitivity ◽  
Portable Devices ◽  
Research Fields ◽  
Sensing Applications ◽  
Screen Printed Electrodes ◽  
Wide Range ◽  
Screen Printed

Electrogenerated chemiluminescence (also called electrochemiluminescence (ECL)) has become a great focus of attention in different fields of analysis, mainly as a consequence of the potential remarkably high sensitivity and wide dynamic range. In the particular case of sensing applications, ECL biosensor unites the benefits of the high selectivity of biological recognition elements and the high sensitivity of ECL analysis methods. Hence, it is a powerful analytical device for sensitive detection of different analytes of interest in medical prognosis and diagnosis, food control and environment. These wide range of applications are increased by the introduction of screen-printed electrodes (SPEs). Disposable SPE-based biosensors cover the need to perform in-situ measurements with portable devices quickly and accurately. In this review, we sum up the latest biosensing applications and current progress on ECL bioanalysis combined with disposable SPEs in the field of bio affinity ECL sensors including immunosensors, DNA analysis and catalytic ECL sensors. Furthermore, the integration of nanomaterials with particular physical and chemical properties in the ECL biosensing systems has improved tremendously their sensitivity and overall performance, being one of the most appropriates research fields for the development of highly sensitive ECL biosensor devices.

scholarly journals Strain Sensor via Wood Anomalies in 2D Dielectric Array

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1022
Author(s):  
Rashid G. Bikbaev ◽  
Ivan V. Timofeev ◽  
Vasiliy F. Shabanov
Keyword(s):  
Higher Plants ◽  
Numerical Study ◽  
Reciprocal Lattice ◽  
Strain Sensing ◽  
Photonic Materials ◽  
Sensing Applications ◽  
Wide Range ◽  
Sensor Structure ◽  
Optical Behavior ◽  
Chlorophyll Absorption

Optical sensing is one of many promising applications for all-dielectric photonic materials. Herein, we present an analytical and numerical study on the strain-responsive spectral properties of a bioinspired sensor. The sensor structure contains a two-dimensional periodic array of dielectric nanodisks to mimic the optical behavior of grana lamellae inside chloroplasts. To accumulate a noticeable response, we exploit the collective optical mode in grana ensemble. In higher plants, such a mode appears as Wood’s anomaly near the chlorophyll absorption line to control the photosynthesis rate. The resonance is shown persistent against moderate biological disorder and deformation. Under the stretching or compression of a symmetric structure, the mode splits into a couple of polarized modes. The frequency difference is accurately detected. It depends on the stretch coefficient almost linearly providing easy calibration of the strain-sensing device. The sensitivity of the considered structure remains at 5 nm/% in a wide range of strain. The influence of the stretching coefficient on the length of the reciprocal lattice vectors, as well as on the angle between them, is taken into account. This adaptive phenomenon is suggested for sensing applications in biomimetic optical nanomaterials.

scholarly journals Gold–Carbon Nanocomposites for Environmental Contaminant Sensing

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 719
Author(s):  
Shahrooz Rahmati ◽  
William Doherty ◽  
Arman Amani Babadi ◽  
Muhamad Syamim Akmal Che Mansor ◽  
Nurhidayatullaili Muhd Julkapli ◽  
...  
Keyword(s):  
Environmental Pollutants ◽  
High Sensitivity ◽  
Environmental Crisis ◽  
World Population ◽  
Chemical Contaminants ◽  
Carbon Nanocomposites ◽  
Minimal Sample ◽  
Wide Range ◽  
And Control ◽  
Analytical Tools

The environmental crisis, due to the rapid growth of the world population and globalisation, is a serious concern of this century. Nanoscience and nanotechnology play an important role in addressing a wide range of environmental issues with innovative and successful solutions. Identification and control of emerging chemical contaminants have received substantial interest in recent years. As a result, there is a need for reliable and rapid analytical tools capable of performing sample analysis with high sensitivity, broad selectivity, desired stability, and minimal sample handling for the detection, degradation, and removal of hazardous contaminants. In this review, various gold–carbon nanocomposites-based sensors/biosensors that have been developed thus far are explored. The electrochemical platforms, synthesis, diverse applications, and effective monitoring of environmental pollutants are investigated comparatively.

Sign in / Sign up

Export Citation Format

Share Document