scholarly journals Application of Terrestrial Laser Scanning (TLS) in the Architecture, Engineering and Construction (AEC) Industry

Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 265
Author(s):  
Chao Wu ◽  
Yongbo Yuan ◽  
Yang Tang ◽  
Boquan Tian
Keyword(s):  
Data Processing ◽  
Laser Scanning ◽  
Large Scale ◽  
Terrestrial Laser Scanning ◽  
Current Status ◽  
Future Research ◽  
Scientometric Analysis ◽  
3D Model Reconstruction ◽  
Future Research Directions ◽  
Effective Use

As a revolutionary technology, terrestrial laser scanning (TLS) is attracting increasing interest in the fields of architecture, engineering and construction (AEC), with outstanding advantages, such as highly automated, non-contact operation and efficient large-scale sampling capability. TLS has extended a new approach to capturing extremely comprehensive data of the construction environment, providing detailed information for further analysis. This paper presents a systematic review based on scientometric and qualitative analysis to summarize the progress and the current status of the topic and to point out promising research efforts. To begin with, a brief understanding of TLS is provided. Following the selection of relevant papers through a literature search, a scientometric analysis of papers is carried out. Then, major applications are categorized and presented, including (1) 3D model reconstruction, (2) object recognition, (3) deformation measurement, (4) quality assessment, and (5) progress tracking. For widespread adoption and effective use of TLS, essential problems impacting working effects in application are summarized as follows: workflow, data quality, scan planning, and data processing. Finally, future research directions are suggested, including: (1) cost control of hardware and software, (2) improvement of data processing capability, (3) automatic scan planning, (4) integration of digital technologies, (5) adoption of artificial intelligence.

Tourism research for the GCC region: Current status and future research directions

2021 ◽  
pp. 135481662199996
Author(s):  
Ali Salman Saleh ◽  
Charbel Bassil ◽  
Arsalan Safari
Keyword(s):  
United Arab Emirates ◽  
Current Status ◽  
Future Research ◽  
Research Directions ◽  
Regional Tourism ◽  
Research Theme ◽  
Tourism Sector ◽  
Future Research Directions ◽  
Meta Analyses ◽  
The Impact

Tourism in the Gulf Cooperation Council (GCC) countries has recently been considered by policymakers as a new avenue for economic diversification. Despite the considerable literature concerning the impact of tourism worldwide, only a limited number of studies have looked at the tourism sector in the GCC region or analyzed its economic, sociocultural, and environmental impacts. This article therefore conducts a systematic review of the state of the literature related to tourism in the GCC region. It provides effective insights about the current status, gaps, and challenges and proposes future research directions in this area for academics, practitioners, and policymakers with an interest in regional tourism development. The preferred reporting items for systematic reviews and meta-analyses approach was used to identify and select the papers. Some 23 papers were identified and analyzed. The majority of these studies focused on the United Arab Emirates, specifically the Dubai emirate. We found the most dominant research theme to be tourism planning.

scholarly journals Mesophotic.org: a repository for scientific information on mesophotic ecosystems

Database ◽  
2019 ◽  
Vol 2019 ◽  
Author(s):  
Pim Bongaerts ◽  
Gonzalo Perez-Rosales ◽  
Veronica Z Radice ◽  
Gal Eyal ◽  
Andrea Gori ◽  
...  
Keyword(s):  
Large Scale ◽  
Scientific Information ◽  
Temporal Trends ◽  
Light Availability ◽  
Research Community ◽  
Future Research ◽  
Photosynthetic Organisms ◽  
Future Research Directions ◽  
Available Information ◽  
Reduced Light

Abstract Mesophotic coral ecosystems (MCEs) and temperate mesophotic ecosystems (TMEs) occur at depths of roughly 30–150 m depth and are characterized by the presence of photosynthetic organisms despite reduced light availability. Exploration of these ecosystems dates back several decades, but our knowledge remained extremely limited until about a decade ago, when a renewed interest resulted in the establishment of a rapidly growing research community. Here, we present the ‘mesophotic.org’ database, a comprehensive and curated repository of scientific literature on mesophotic ecosystems. Through both manually curated and automatically extracted metadata, the repository facilitates rapid retrieval of available information about particular topics (e.g. taxa or geographic regions), exploration of spatial/temporal trends in research and identification of knowledge gaps. The repository can be queried to comprehensively obtain available data to address large-scale questions and guide future research directions. Overall, the ‘mesophotic.org’ repository provides an independent and open-source platform for the ever-growing research community working on MCEs and TMEs to collate and expedite our understanding of the occurrence, composition and functioning of these ecosystems. Database URL: http://mesophotic.org/

Sustainability and Design Education: The Current Status of Product Design Higher Education in the UK

2021 ◽  
Author(s):  
Emelia Delaney ◽  
Wei Liu
Keyword(s):  
Higher Education ◽  
Product Design ◽  
New Product Development ◽  
Design Education ◽  
Current Status ◽  
Design Stage ◽  
Future Research ◽  
Future Research Directions ◽  
Area Of Concern ◽  
The Uk

Abstract The aim of sustainability is to fulfil the needs of current generations without compromising the needs of future generations. It is also a rising area of concern within industry, it is therefore important that graduate designers are equipped with the skills to accommodate sustainability issues as well as demands from industry. Additionally, the product design stage during New Product Development has been identified to have the greatest impact on the sustainability of the entire product, however how educated designers are on the topic of sustainability is unclear. An initial literature review has been conducted to investigate design education on sustainability as well as teaching styles. Following this the study identifies and reviews UK Product Design courses to establish the current status of sustainability integration in higher education. The exploration into university prospectuses has found that around half of UK universities implement sustainability in some way, however there are limited courses which dedicate specific modules to sustainability. Additionally, links with industry and accreditation organizations between UK product design courses have been confirmed, but there is no definite information to suggest that the universities use this to aid in the implementation sustainability education. From this review future research directions have been outlined.

scholarly journals 3D Printing in Construction: Current Status, Implementation Hindrances, and Development Agenda

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Xin Ning ◽  
Tong Liu ◽  
Chunlin Wu ◽  
Chao Wang
Keyword(s):  
Systematic Review ◽  
3D Printing ◽  
Current Status ◽  
Future Research ◽  
Research Directions ◽  
Technical Research ◽  
Research Status ◽  
Development Agenda ◽  
Future Research Directions ◽  
Future Topics

3D printing (3DP) is regarded as an innovation that contributes to automation in civil engineering and offers benefits in design, greenness, and efficiency. It is necessary to objectively analyze the current status and challenges associated with 3DP and identify future research directions to properly understand its construction applications. Previous research has focused more on the technical dimension of 3DP; however, the nontechnical dimension of the technology may hinder its implementation and thus must be paid particular attention to. This study presents a systematic review of the existing literature from both technical and nontechnical dimensions by combining quantitative and qualitative studies. The quantitative study was conducted using scientometric methods. The qualitative study analyzed information, including the technical research status and nontechnical challenges and trends. Two aspects of technical research status are presented, including materials and processes. In addition, nontechnical challenges and trends from the economic, environmental, social, and legislative aspects are proposed. This study provides a comprehensive agenda to advance 3DP in construction and proposes research interests, challenges, and future topics. It is intended to help construction practitioners systematically master existing processes and materials and assess the application degree and necessity of 3DP.

Big 4 Firms as Legal Service Providers: Implications for Audit Practice and Future Research Directions

2021 ◽  
Author(s):  
David N. Herda ◽  
Jonathan H. Grenier ◽  
Billy E. Brewster ◽  
Mary E Marshall
Keyword(s):  
Service Providers ◽  
Current Status ◽  
Future Research ◽  
Legal Services ◽  
Legal Service ◽  
Accounting Firms ◽  
Big 4 ◽  
Rule Changes ◽  
Future Research Directions ◽  
The U.S

The Big 4 accounting firms have expanded their legal service arms to historic proportions over the last decade, employing thousands of lawyers around the world. Although most of the Big 4's revenue from legal services is presently generated outside the U.S., they are now making inroads into the U.S. legal market, and rule changes are being considered that would further allow the Big 4 to offer legal services in the U.S. This essay summarizes the current status of Big 4 firms as legal service providers, discusses potential implications of legal offerings for their U.S. audit practices, and suggests directions for future research. Our proposed research questions are informed by several literatures, interviews with former Big 4 partners and practicing attorneys, and a survey of the general public. They center on the fundamental difference between audit and law practices, brand equity considerations, and culture changes within the Big 4.

Enhancing Emergency Response Management using Emergency Description Information Technology (EDIT)

2016 ◽  
pp. 1264-1278
Author(s):  
Michael A. Erskine ◽  
Will Pepper
Keyword(s):  
Emergency Response ◽  
Process Model ◽  
Large Scale ◽  
Design Science ◽  
Future Research ◽  
Sporting Events ◽  
Emergency Responder ◽  
Response Information ◽  
Novel Approach ◽  
Future Research Directions

This paper presents a novel approach toward facilitating the effective collection and communication of information during an emergency. Initially, this research examines current emergency response information workflows and emergency responder dispatch criteria. A process for the optimization of these workflows and criteria, along with a suggested method to improve data collection accuracy and emergency response time using a mobile device application, are suggested. Specifically, a design-science approach incorporating the development of an expert system designed to facilitate efficient and effective sharing of emergency information is applied. The resulting benefits could improve emergency communications during large-scale international gatherings, such as sporting events or festivals, as well as the sharing of industry-specific safety incidents. A process model for conducting analyses of additional emergency response processes is also presented. Finally, future research directions are discussed.

scholarly journals Review of literature on decision support systems for natural hazard risk reduction: Current status and future research directions

2017 ◽  
Vol 96 ◽  
pp. 378-409 ◽  
Author(s):  
Jeffrey Peter Newman ◽  
Holger Robert Maier ◽  
Graeme Angus Riddell ◽  
Aaron Carlo Zecchin ◽  
James Edward Daniell ◽  
...  
Keyword(s):  
Decision Support ◽  
Decision Support Systems ◽  
Natural Hazard ◽  
Current Status ◽  
Future Research ◽  
Review Of Literature ◽  
Research Directions ◽  
Hazard Risk ◽  
Reduction Current ◽  
Future Research Directions

scholarly journals TLS and SfM Approach for Bulk Density Determination of Excavated Heterogeneous Raw Materials

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 174 ◽  
Author(s):  
Peter Blistan ◽  
Stanislav Jacko ◽  
Ľudovít Kovanič ◽  
Julián Kondela ◽  
Katarína Pukanská ◽  
...  
Keyword(s):  
Bulk Density ◽  
Laser Scanning ◽  
Large Scale ◽  
Raw Materials ◽  
Terrestrial Laser Scanning ◽  
Mineral Resources ◽  
Point Clouds ◽  
Raw Material

A frequently recurring problem in the extraction of mineral resources (especially heterogeneous mineral resources) is the rapid operative determination of the extracted quantity of raw material in a surface quarry. This paper deals with testing and analyzing the possibility of using unconventional methods such as digital close-range photogrammetry and terrestrial laser scanning in the process of determining the bulk density of raw material under in situ conditions. A model example of a heterogeneous deposit is the perlite deposit Lehôtka pod Brehmi (Slovakia). Classical laboratory methods for determining bulk density were used to verify the results of the in situ method of bulk density determination. Two large-scale samples (probes) with an approximate volume of 7 m3 and 9 m3 were realized in situ. 6 point samples (LITH) were taken for laboratory determination. By terrestrial laser scanning (TLS) measurement from 2 scanning stations, point clouds with approximately 163,000/143,000 points were obtained for each probe. For Structure-from-Motion (SfM) photogrammetry, 49/55 images were acquired for both probes, with final point clouds containing approximately 155,000/141,000 points. Subsequently, the bulk densities of the bulk samples were determined by the calculation from in situ measurements by TLS and SfM photogrammetry. Comparison of results of the field in situ measurements (1841 kg∙m−3) and laboratory measurements (1756 kg∙m−3) showed only a 4.5% difference in results between the two methods for determining the density of heterogeneous raw materials, confirming the accuracy of the used in situ methods. For the determination of the loosening coefficient, the material from both large-scale samples was transferred on a horizontal surface. Their volumes were determined by TLS. The loosening coefficient for the raw material of 1.38 was calculated from the resulting values.

Sign in / Sign up

Export Citation Format

Share Document