A framework of artificial light management for optimal plant development for smart greenhouse application

Smart greenhouse farming has emerged as one of the solutions to global food security, where farming productivity can be managed and improved in an automated manner. While it is known that plant development is highly dependent on the quantity and quality of light exposure, the specific impact of the different light properties is yet to be fully understood. In this study, using the model plant Arabidopsis, we systematically investigate how six different light properties (i.e., photoperiod, light offset, intensity, phase of dawn, duration of twilight and period) would affect plant development i.e., flowering time and hypocotyl (seedling stem) elongation using an established mathematical model of the plant circadian system relating light input to flowering time and hypocotyl elongation outputs for smart greenhouse application. We vary each of the light properties individually and then collectively to understand their effect on plant development. Our analyses show in comparison to the nominal value, the photoperiod of 18 hours, period of 24 hours, no light offset, phase of dawn of 0 hour, duration of twilight of 0.05 hour and a reduced light intensity of 1% are able to improve by at least 30% in days to flower (from 32.52 days to 20.61 days) and hypocotyl length (from 1.90 mm to 1.19mm) with the added benefit of reducing energy consumption by at least 15% (from 4.27 MWh/year to 3.62 MWh/year). These findings could provide beneficial solutions to the smart greenhouse farming industries in terms of achieving enhanced productivity while consuming less energy.

Molecular Effectors of Photodynamic Therapy-Mediated Resistance to Cancer Cells

Photodynamic therapy (PDT) is currently enjoying considerable attention as the subject of experimental research to treat resistant cancers. The preferential accumulation of a non-toxic photosensitizer (PS) in different cellular organelles that causes oxidative damage by combining light and molecular oxygen leads to selective cell killing. However, one major setback, common among other treatment approaches, is tumor relapse and the development of resistance causing treatment failure. PDT-mediated resistance could result from increased drug efflux and decreased localization of PS, reduced light exposure, increased DNA damage repair, and altered expression of survival genes. This review highlights the essential insights of PDT reports in which PDT resistance was observed and which identified some of the molecular effectors that facilitate the development of PDT resistance. We also discuss different perceptions of PDT and how its current limitations can be overturned to design improved cancer resistant treatments.

The Photograph Registration of Petri Dishes in High Quality and Image Editing of Microbiological Testing

Science is based on evidence that can be measured or observed through methodical techniques which are expressed in several ways, either quantitatively or qualitatively. The technical photograph becomes one of the most important key tools to the result’s disclosure. In the microbiological research, several pieces of evidence can be indicated with variables that are deeply related to the means of culture; pH and color variation, halo formation, overlay of structures, culture shape, among others. The employment of technical photographs, as a strategy of the experimental observation and reliable representation, is indispensable. The protocol presented here suggests the production of the photographic support in microbiological tests runs on Petri dishes, taken by a smartphone to obtain high-quality images, besides showing tools to edit images through PowerPoint. The support is composed of a paper tube with a transparent border, whose reduced light penetration avoids problems, such as the luminous reflection over the Petri dishes or the environment itself. The edition consists of the photograph variation, and in clipping and pasting on uniform backgrounds to provide further detailing. The protocol allowed a standardized photograph collection in high quality, which is ideal for a comparative portrait of microbiological behaviors. The image editing enabled a framework and greater visibility of physical and biological structures in the exhibition of photographs inside the manuscript, such as the removal of noises, background alterations, deformities or irregularities. This protocol is a tool that helps the researcher on the knowledge-obtaining process, and it is applied to different experiments or adapted into the most variable research subjects.

Microclimate suitability for green and coloured sweet pepper hybrids in open and protected structures in sub-tropical humid climate of West Bengal

A study was undertaken for two consecutive seasons (autumn-winter) to evaluate the performance of three green, red and yellow-fruited sweet pepper hybrids in open field and under two protected structures (50% green shade net house and naturally-ventilated polyhouse) to understand the microclimate suitability for maximizing the productivity of these hybrids under sub-tropical humid climatic condition of eastern India. In this climatic condition, naturally-ventilated polyhouse was most suitable for enhancing fruit yieldof both green and coloured fruited hybrids. Open field condition was not suitable for both yellow and redfruited hybrids. Though green-fruited hybrids could be grown in open field condition, fruit yield was more than double under polyhouse. Shade net house could not be considered as a suitable protected structure for sweet pepper in this climatic condition because of reduced light intensity and high relative humidity inside it causing low fruit set and high incidence of bacterial wilt disease. Maximum/minimum temperature30oC to 33oC / 14oC to 17oC with comparatively reduced light intensity of 35,000 to 55,000 lux, prevention of adverse effect of low night temperature during winter and  60 per cent relative humidity condition during flowering, fruit set and fruit development period inside the naturally ventilated polyhouse were most suitable growing conditions for getting maximum productivity of both green and colour-fruited hybrids of sweet pepper.

Effect of varying salt concentration on iridescence in precooked pork meat

The objective of this study was to investigate the effect of salt concentration on meat iridescence in cured cooked pork products. In addition, the influence of nitrite and pigmentary color on iridescence and its visual macroscopic perception was ascertained. Sample cubes from the pigs M. longissimus thoracis et lumborum were salted with either NaCl (20 g/kg, 40 g/kg) or nitrite curing salt (6 g/kg, 20 g/kg, and 40 g/kg) and subsequently cooked. Control samples were not salted. The effects of NaCl and curing salt on iridescence, instrumental color and microstructure were evaluated. Salt treatment significantly (p < 0.05) increased water-holding capacity, mean myofibers diameters and iridescence and reduced light scattering (L* value). An iridescence limit was reached with the 20 g/kg salt treatments. No differences between sodium chloride and nitrite curing salt were observed for both visual evaluation and colorimetry of the interference colors. Iridescence increases were attributed to a swelling of the myofilament lattice and thus reduction of intermyofibrillar spaces as well as an optical clearing of the myofibrils by dissolution of myofibrillar proteins that both reduce light scattering and allow more reflectance and interference to occur. Graphic abstract

Deep Ultraviolet AlGaN-Based Light-Emitting Diodes with p-AlGaN/AlGaN Superlattice Hole Injection Structures

The p-AlGaN/AlGaN superlattice (SL) hole injection structure was introduced into deep ultraviolet (DUV) light-emitting diodes (LEDs) to enhance their performances. The period thicknesses of the p-Al0.8Ga0.2N/Al0.48Ga0.52N SLs affected the performances of the DUV LEDs. The appropriate period thickness of the p-Al0.8Ga0.2N/Al0.48Ga0.52N SL may enhance the hole injection of DUV LEDs. Therefore, compared with the reference LEDs, the DUV LEDs with the 10-pair Al0.8Ga0.2N (1 nm)/Al0.48Ga0.52N (1 nm) SL presented forward voltage reduction of 0.23 V and light output power improvement of 15% at a current of 350 mA. Furthermore, the 10-pair Al0.8Ga0.2N (1 nm)/Al0.48Ga0.52N (1 nm) SL could slightly suppress the Auger recombination and current overflow of the DUV LEDs in a high-current operation region. In addition to improved carrier injection, the DUV LEDs with the p-Al0.8Ga0.2N/Al0.48Ga0.52N SL hole injection structure showed reduced light absorption at their emission wavelength compared with the reference LEDs. Therefore, the DUV LEDs with p-Al0.8Ga0.2N/Al0.48Ga0.52N SL may exhibit better light extraction efficiency than the reference LEDs. The enhancement of p-Al0.8Ga0.2N (1 nm)/Al0.48Ga0.52N (1 nm) SL may contribute to improvements in light extraction and hole injection.

Reduced light absorption of black carbon (BC) and its influence on BC-boundary-layer interactions during “APEC Blue”

Light absorption and radiative forcing of black carbon (BC) is influenced by both BC itself and its interactions with other aerosol chemical compositions. Although the changes in BC concentrations in response to emission reduction measures have been well documented, the influence of emission reductions on the light absorption properties of BC and its influence on BC-boundary-layer interactions has been less explored. In this study, we used the online coupled WRF-Chem model to examine how emission control measures during the Asia-Pacific Economic Cooperation (APEC) summit affect the mixing state and light absorption of BC, and the associated implications for BC-PBL interactions. We found that both the mass concentration of BC and the BC coating materials declined during the APEC week, which reduced the light absorption and light absorption enhancement (Eab) of BC. The reduced absorption aerosol optical depth (AAOD) during APEC was caused by both the decline in the mass concentration of BC itself (52.0 %), and the lensing effect of BC (48.0 %). The reduction in coating materials (39.4 %) contributed the most to the influence of the lensing effect, and the reduced light absorption capability (Eab) contributed 3.2 % to the total reduction in AAOD. Reduced light absorption of BC due to emission control during APEC enhanced planetary boundary layer height (PBLH) by 8.2 m. PM2.5 and O3 were found to have different responses to the changes in the light absorption of BC. Reduced light absorption of BC due to emission reductions decreased near-surface PM2.5 concentrations but near-surface O3 concentrations were enhanced in the North China Plain. These results suggest that current measures to control SO2, NOx, etc. would be effective in reducing the absorption enhancement of BC and in inhibiting the feedback of BC on the boundary layer. However, enhanced ground O3 might be a side effect of current emission control strategies. How to control emissions to offset this side effect of current emission control measures on O3 should be an area of further focus.