scholarly journals From Historical Silk Fabrics to Their Interactive Virtual Representation and 3D Printing

2020 ◽  
Vol 12 (18) ◽  
pp. 7539
Author(s):  
Manolo Pérez ◽  
Pablo Casanova-Salas ◽  
Pawel Twardo ◽  
Piotr Twardo ◽  
Arabella León ◽  
...  
Keyword(s):  
3D Printing ◽  
Cultural Heritage ◽  
Environmental Sustainability ◽  
3D Models ◽  
Creative Industries ◽  
Technological Tools ◽  
3D Printed ◽  
Great Relevance ◽  
Traditional Production ◽  
Silk Fabrics

The documentation, dissemination, and enhancement of Cultural Heritage is of great relevance. To that end, technological tools and interactive solutions (e.g., 3D models) have become increasingly popular. Historical silk fabrics are nearly flat objects, very fragile and with complex internal geometries, related to different weaving techniques and types of yarns. These characteristics make it difficult to properly document them, at the yarn level, with current technologies. In this paper, we bring a new methodology to virtually represent such heritage and produce 3D printouts, also making it highly interactive through the tool Virtual Loom. Our work involves sustainability from different perspectives: (1) The traditional production of silk fabrics respects the environment; (2) Virtual Loom allows the studying of silk heritage while avoiding their degradation; (3) Virtual Loom allows creative industries to save money and materials; (4) current research on bioplastics for 3D printing contributes to environmental sustainability; (5) edutainment and gaming can also benefit from Virtual Loom, avoiding the need to acquire the original objects and enhancing creativity. The presented work has been carried out within the scope of the SILKNOW project to show some results and discuss the sustainability issues, from the production of traditional silk fabrics, to their dissemination by means of Virtual Loom and 3D printed shapes.

scholarly journals Accessing 3D Printed Vascular Phantoms for Procedural Simulation

2021 ◽  
Vol 7 ◽  
Author(s):  
Jasamine Coles-Black ◽  
Damien Bolton ◽  
Jason Chuen
Keyword(s):  
3D Printing ◽  
Endovascular Procedures ◽  
Low Cost ◽  
3D Models ◽  
Routine Care ◽  
Aortic Aneurysms ◽  
Patient Specific ◽  
Ct Angiogram ◽  
Abdominal Aortic ◽  
3D Printed

Introduction: 3D printed patient-specific vascular phantoms provide superior anatomical insights for simulating complex endovascular procedures. Currently, lack of exposure to the technology poses a barrier for adoption. We offer an accessible, low-cost guide to producing vascular anatomical models using routine CT angiography, open source software packages and a variety of 3D printing technologies.Methods: Although applicable to all vascular territories, we illustrate our methodology using Abdominal Aortic Aneurysms (AAAs) due to the strong interest in this area. CT aortograms acquired as part of routine care were converted to representative patient-specific 3D models, and then printed using a variety of 3D printing technologies to assess their material suitability as aortic phantoms. Depending on the technology, phantoms cost $20–$1,000 and were produced in 12–48 h. This technique was used to generate hollow 3D printed thoracoabdominal aortas visible under fluoroscopy.Results: 3D printed AAA phantoms were a valuable addition to standard CT angiogram reconstructions in the simulation of complex cases, such as short or very angulated necks, or for positioning fenestrations in juxtarenal aneurysms. Hollow flexible models were particularly useful for device selection and in planning of fenestrated EVAR. In addition, these models have demonstrated utility other settings, such as patient education and engagement, and trainee and anatomical education. Further study is required to establish a material with optimal cost, haptic and fluoroscopic fidelity.Conclusion: We share our experiences and methodology for developing inexpensive 3D printed vascular phantoms which despite material limitations, successfully mimic the procedural challenges encountered during live endovascular surgery. As the technology continues to improve, 3D printed vascular phantoms have the potential to disrupt how endovascular procedures are planned and taught.

scholarly journals A STUDY ON PLANNING AND PLATFORM FOR INTERACTIVE EXHIBITION OF SCIENTIFIC CULTURAL HERITAGE

2019 ◽  
Vol XLII-2/W15 ◽  
pp. 605-607
Author(s):  
Y. H. Jo ◽  
J. Kim ◽  
N. C. Cho ◽  
C. H. Lee ◽  
Y. H. Yun ◽  
...  
Keyword(s):  
3D Printing ◽  
Cultural Heritage ◽  
Three Dimensional ◽  
Conservation Science ◽  
Scientific Content ◽  
Projection Mapping ◽  
Digital Database ◽  
3D Effects ◽  
3D Printed ◽  
Bronze Mirrors

<p><strong>Abstract.</strong> This study has developed an experiential exhibition system of scientific cultural heritage through interactive projection mapping. A bronze mirror with fine linear design was selected as an exhibition subject considering the intuitiveness and responsiveness of research and development results. First, three-dimensional (3D) scanning was performed to construct a digital database of the original forms, and computer graphics-based 3D modeling was also performed to build exhibition materials and 3D printed objects. Furthermore, objective scenarios were created based on a traditional science experience, understanding the present bronze mirror, and processes of restoring the corroded original bronze mirror through modern conservation science. The technique selected to implement the scientific content of bronze mirror as media art in this study is interactive projection mapping. Moreover, a large 3D printing of bronze mirror was installed at the center of the exhibition space to allow users and all viewers to concurrently engage in scientific cultural heritage content. Simultaneous projection mapping on the front and rear of the printed bronze mirror model enhanced 3D effects and the immersion of the content. To construct an interactive space connecting the virtual and reality, ore, mold, bronze mirror replicas, 3D printing outputs, and cultural products used in the process of producing bronze mirrors were exhibited to make the exhibit more intuitive for visitors. This interactive projection mapping-based scientific and cultural exhibition of the bronze mirror is an experiential exhibition system which combines traditional science, modern conservation science, and future exhibition technology.</p>

scholarly journals REPLICAS IN CULTURAL HERITAGE: 3D PRINTING AND THE MUSEUM EXPERIENCE

2018 ◽  
Vol XLII-2 ◽  
pp. 55-62 ◽  
Author(s):  
M. Ballarin ◽  
C. Balletti ◽  
P. Vernier
Keyword(s):  
3D Printing ◽  
Cultural Heritage ◽  
Laser Scanner ◽  
Original Data ◽  
Digital Data ◽  
Physical Representation ◽  
Museum Exhibitions ◽  
3D Printed ◽  
Museum Experience ◽  
Partially Sighted

3D printing has seen a recent massive diffusion for several applications, not least the field of Cultural Heritage. Being used for different purposes, such as study, analysis, conservation or access in museum exhibitions, 3D printed replicas need to undergo a process of validation also in terms of metrical precision and accuracy.<br> The Laboratory of Photogrammetry of Iuav University of Venice has started several collaborations with Italian museum institutions firstly for the digital acquisition and then for the physical reproduction of objects of historical and artistic interest. The aim of the research is to analyse the metric characteristics of the printed model in relation to the original data, and to optimize the process that from the survey leads to the physical representation of an object. In fact, this could be acquired through different methodologies that have different precisions (multi-image photogrammetry, TOF laser scanner, triangulation based laser scanner), and it always involves a long processing phase. It should not be forgotten that the digital data have to undergo a series of simplifications, which, on one hand, eliminate the noise introduced by the acquisition process, but on the other one, they can lead to discrepancies between the physical copy and the original geometry. In this paper we will show the results obtained on a small archaeological find that was acquired and reproduced for a museum exhibition intended for blind and partially sighted people.

Design and Development of 3D Printed Teaching Aids for Architecture Education

2019 ◽  
pp. 457-475
Author(s):  
Min Jeong Song ◽  
Euna Ha ◽  
Sang-Kwon Goo ◽  
JaeKyung Cho
Keyword(s):  
3D Printing ◽  
3D Modeling ◽  
3D Models ◽  
Design And Development ◽  
Architecture Education ◽  
Teaching Aids ◽  
Current State ◽  
Practice Based Research ◽  
Research Findings ◽  
3D Printed

This article describes how the implementation of 3D printing in classrooms has brought many opportunities to educators as it provides affordability and accessibility in creating and customizing teaching aids. The study reports on the process of fabricating teaching aids for architecture education using 3D printing technologies. The practice-based research intended to illustrate the making process from initial planning, 3D modeling to 3D printing with practical examples, and addresses the potential induced by the technologies. Based on the investigation into the current state of 3D printing technologies in education, limitations were identified before the making process. The researchers created 3D models in both digital and tangible forms and the process was documented in textual and pictorial formats. It is expected that the research findings will serve as a guideline for other educators to create 3D printed teaching aids, particularly architectural forms.

scholarly journals A review and guide to creating patient specific 3D printed anatomical models from MRI for benign gynecologic surgery

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Teresa E. Flaxman ◽  
Carly M. Cooke ◽  
Olivier X. Miguel ◽  
Adnan M. Sheikh ◽  
Sukhbir S. Singh
Keyword(s):  
3D Printing ◽  
Clinical Benefit ◽  
Three Dimensional ◽  
Uterine Fibroids ◽  
3D Models ◽  
Gynecologic Surgery ◽  
Patient Specific ◽  
Mr Images ◽  
Adjacent Structures ◽  
3D Printed

Abstract Background Patient specific three-dimensional (3D) models can be derived from two-dimensional medical images, such as magnetic resonance (MR) images. 3D models have been shown to improve anatomical comprehension by providing more accurate assessments of anatomical volumes and better perspectives of structural orientations relative to adjacent structures. The clinical benefit of using patient specific 3D printed models have been highlighted in the fields of orthopaedics, cardiothoracics, and neurosurgery for the purpose of pre-surgical planning. However, reports on the clinical use of 3D printed models in the field of gynecology are limited. Main text This article aims to provide a brief overview of the principles of 3D printing and the steps required to derive patient-specific, anatomically accurate 3D printed models of gynecologic anatomy from MR images. Examples of 3D printed models for uterine fibroids and endometriosis are presented as well as a discussion on the barriers to clinical uptake and the future directions for 3D printing in the field of gynecological surgery. Conclusion Successful gynecologic surgery requires a thorough understanding of the patient’s anatomy and burden of disease. Future use of patient specific 3D printed models is encouraged so the clinical benefit can be better understood and evidence to support their use in standard of care can be provided.

scholarly journals The use of three-dimensional anatomical patient-specific printed models in surgical clipping of intracranial aneurysm: A pilot study

2020 ◽  
Vol 11 ◽  
pp. 381
Author(s):  
Moneer K. Faraj ◽  
Samer S. Hoz ◽  
Amjad J. Mohammad
Keyword(s):  
3D Printing ◽  
Teaching Hospital ◽  
Three Dimensional ◽  
3D Models ◽  
Patient Specific ◽  
Anterior Communicating Artery ◽  
Parent Vessel ◽  
Microsurgical Clipping ◽  
Valuable Adjunct ◽  
3D Printed

Background: In the present study, we aim to develop simulation models based on computed tomography angiography images of intracranial aneurysms (IAs) and their parent vessels using three-dimensional (3D) printing technology. The study focuses on the value of these 3D models in presurgical planning and intraoperative navigation and ultimately their impact on patient outcomes. To the best of our knowledge, this is the first report of its kind from a war-torn country, like Iraq. Methods: This is a prospective study of a series of 11, consecutively enrolled, patients suffering from IAs for the period between February and September 2019. The study represents a collaboration between the two major neurosurgical centers in Baghdad/Iraq; Neurosciences Teaching Hospital and Neurosurgery Teaching Hospital. We analyzed the data of eleven patients with IAs treated by microsurgical clipping. These data include patient demographics, clinical, surgical, and outcomes along with the data of the 3D-printed replica used in these surgeries. All cases were operated on by one surgeon. Results: Our study included 11 patients, with a total of 11 aneurysms clipped. The mean age was 44 ± 8, with a median of 42.5 and a range of 35–61 years. About 60% of our patients were female with a female-to-male ratio of 1:5. About 60% of the aneurysms were located at the anterior communicating artery (Acom) while the remaining 40% were equally distributed between the posterior communicating and internal carotid arteries bifurcation. The standard pterional approach was followed in 50% of cases, whereas the other 50% of patients were treated through the lateral supraorbital approach. About 90% (n = 9) of the patients had a Glasgow Outcome Scale (GOS) of 5 and 10% had a GOS of 4. The 3D-printed models successfully replicated the aneurysm size, location, and relation to the parent vessel with 100% accuracy and were used for intraoperative guidance. The average production time was 24–48 h and the production cost was 10–20 US dollars. Conclusion: 3D printing is a promising technology that is rapidly penetrating the field of neurosurgery. In particular, the use of 3D-printed patient-matched, anatomically accurate replicas of the cerebral vascular tree is valuable adjunct to the microsurgical clipping of IAs, and our study conclusions support this concept. However, both the feasibility and clinical utility of 3D printing remain the subject of much, ongoing investigations.

scholarly journals Post-Processing of 3D-Printed Polymers

Technologies ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 61
Author(s):  
John Ryan C. Dizon ◽  
Ciara Catherine L. Gache ◽  
Honelly Mae S. Cascolan ◽  
Lina T. Cancino ◽  
Rigoberto C. Advincula
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
3D Models ◽  
Industrial Applications ◽  
Post Processing ◽  
Processing Methods ◽  
Stl File ◽  
Advantages And Disadvantages ◽  
Manufacturing Operations ◽  
3D Printed

Additive manufacturing, commonly known as 3D printing, is an advancement over traditional formative manufacturing methods. It can increase efficiency in manufacturing operations highlighting advantages such as rapid prototyping, reduction of waste, reduction of manufacturing time and cost, and increased flexibility in a production setting. The additive manufacturing (AM) process consists of five steps: (1) preparation of 3D models for printing (designing the part/object), (2) conversion to STL file, (3) slicing and setting of 3D printing parameters, (4) actual printing, and (5) finishing/post-processing methods. Very often, the 3D printed part is sufficient by itself without further post-printing processing. However, many applications still require some forms of post-processing, especially those for industrial applications. This review focuses on the importance of different finishing/post-processing methods for 3D-printed polymers. Different 3D printing technologies and materials are considered in presenting the authors’ perspective. The advantages and disadvantages of using these methods are also discussed together with the cost and time in doing the post-processing activities. Lastly, this review also includes discussions on the enhancement of properties such as electrical, mechanical, and chemical, and other characteristics such as geometrical precision, durability, surface properties, and aesthetic value with post-printing processing. Future perspectives is also provided towards the end of this review.

Evaluation of Dimensional Accuracy of 3D printed mandibular model using two different Additive Manufacturing Techniques based on Cone Beam Computed Tomography scan data (A Diagnostic Accuracy Study)

2019 ◽  
Author(s):  
Noha Hamada Mohamed ◽  
Hossam Kandil ◽  
Iman Ismail Dakhli
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Low Cost ◽  
Dimensional Accuracy ◽  
3D Models ◽  
The Body ◽  
Reference Standard ◽  
Linear Measurements ◽  
3D Printed ◽  
Manufacturing Techniques

Abstract In dentistry, 3D printing already has diverse applicability, and holds a great deal of promise to make possible many new and exciting treatments and approaches to manufacturing dental restorations. Better availability, shorter processing time, and descending costs have resulted in the increased use of RP. Concomitantly the development of medical applications is expanding. (Zaharia et al., 2017)Many different printing technologies exist, each with their own advantages and disadvantages. Unfortunately, a common feature of the more functional and productive equipment is the high cost of the equipment, the materials, maintenance, and repair, often accompanied by a need for messy cleaning, difficult post-processing, and sometimes onerous health and safety concerns (Dawood et al., 2015)Low-cost 3D printers represent a great opportunity in the dental and medical field, as they could allow surgeons to use 3D models at a very low cost and, therefore, democratize the use of these 3D models in various indications. However, efforts should be made to establish a unified validation protocol for low-cost RP 3D printed models, including accuracy, reproducibility, and repeatability tests. Asaumi et al., suggested that dimensional changes may not affect the success of surgical applications if such changes are within a 2% variation .However, the proposed cut-off of 2% should be furthermore discussed, as the same accuracy may be not required for all types of indications. (Silva et al., 2008; Maschio et al., 2016)This aim of the present study is to evaluate the dimensional accuracy of the 3D printed mandibular models fabricated by two different additive manufacturing techniques, using highly precise one as selective laser sintering (SLS) and a low-cost one as fused filament fabrication and whether they are both comparable in terms of precision. In addition to evaluation of dimensional accuracy of linear measurements of the mandible in CBCT scans.7 mandibular models will be recruited. Radio-opaque markers of gutta-percha balls will be applied on the model to act as guide pointsTen linear measurements (5 long distances: Inter-condylar, inter-coronoidal, inter-mandibular notch, length of left ramus, length of right ramus; as well as 5 short distances: Length of the body of the mandible at midline, length of the body of the mandible in the area of last left molar, as well as that of the last right molar, the distance between the tip of right condyle to the tip of the right coronoid, as well as that of their left counterparts) will be obtained using digital calliper, to act as the reference standard later. Scanning of the model by CBCT will be next , 3D printing of the scanned image using SLS and FFF printers will be done. Recording of same linear measurment will be done on printed models. Comparison of the recorded values vs reference standard is the last step

FINDUS: An Open-Source 3D Printable Liquid-Handling Workstation for Laboratory Automation in Life Sciences

2019 ◽  
Vol 25 (2) ◽  
pp. 190-199 ◽  
Author(s):  
Fabian Barthels ◽  
Ulrich Barthels ◽  
Marvin Schwickert ◽  
Tanja Schirmeister
Keyword(s):  
3D Printing ◽  
Open Source ◽  
Source Code ◽  
Life Sciences ◽  
3D Models ◽  
Laboratory Automation ◽  
Liquid Handling ◽  
Utility System ◽  
Assembly Instructions ◽  
3D Printed

3D-printed laboratory devices can enable ambitious research purposes even at a low-budget level. To follow this trend, here we describe the construction, calibration, and usage of the FINDUS (Fully Integrable Noncommercial Dispensing Utility System). We report the successful 3D printing and assembly of a liquid-handling workstation for less than $400. Using this setup, we achieve reliable and flexible liquid-dispensing automation with relative pipetting errors of less than 0.3%. We show our system is well suited for several showcase applications from both the biology and chemistry fields. In support of the open-source spirit, we make all 3D models, assembly instructions, and source code available for free download, rebuild, and modification.

Sign in / Sign up

Export Citation Format

Share Document