scholarly journals Review of Wave Energy Converter and Design of Mooring System

2020 ◽  
Vol 12 (19) ◽  
pp. 8251
Author(s):  
Dongsheng Qiao ◽  
Rizwan Haider ◽  
Jun Yan ◽  
Dezhi Ning ◽  
Binbin Li
Keyword(s):  
Wave Energy ◽  
Renewable Resources ◽  
Mooring System ◽  
Wave Direction ◽  
Research Focus ◽  
Energy Converter ◽  
Analysis And Design ◽  
Wave Energy Converters ◽  
Analysis Models ◽  
Energy Converters

In recent decades, the emphasis on renewable resources has grown considerably, leading to significant advances in the sector of wave energy. Nevertheless, the market cannot still be considered as commercialized, as there are still other obstacles in the mooring system for wave energy converters (WECs). The mooring system must be designed to not negatively impact the WEC’s efficiency and reduce the mooring loads. Firstly, the overview of the types of wave energy converters (WECs) are classified through operational principle, absorbing wave direction, location, and power take-off, respectively, and the power production analysis and design challenges of WECs are summarized. Then, the mooring materials, configurations, requirements, and the modeling approaches for WECs are introduced. Finally, the design of mooring systems, including the design considerations and standards, analysis models, software, current research focus, and challenges are discussed.

Optimization of Mooring Configuration Parameters of Floating Wave Energy Converters

2011 ◽  
Author(s):  
Pedro C. Vicente ◽  
Anto´nio F. O. Falca˜o ◽  
Paulo A. P. Justino
Keyword(s):  
Wave Energy ◽  
Oil And Gas ◽  
Wave Energy Converter ◽  
Domain Model ◽  
Floating Point ◽  
Mooring System ◽  
Energy Converter ◽  
Energy Devices ◽  
Wave Energy Converters ◽  
Energy Converters

Floating point absorbers devices are a large class of wave energy converters for deployment offshore, typically in water depths between 40 and 100m. As floating oil and gas platforms, the devices are subject to drift forces due to waves, currents and wind, and therefore have to be kept in place by a proper mooring system. Although similarities can be found between the energy converting systems and floating platforms, the mooring design requirements will have some important differences between them, one of them associated to the fact that, in the case of a wave energy converter, the mooring connections may significantly modify its energy absorption properties by interacting with its oscillations. It is therefore important to examine what might be the more suitable mooring design for wave energy devices, according to the converters specifications. When defining a mooring system for a device, several initial parameters have to be established, such as cable material and thickness, distance to the mooring point on the bottom, and which can influence the device performance in terms of motion, power output and survivability. Different parameters, for which acceptable intervals can be established, will represent different power absorptions, displacements from equilibrium position, load demands on the moorings and of course also different costs. The work presented here analyzes what might be, for wave energy converter floating point absorber, the optimal mooring configuration parameters, respecting certain pre-established acceptable intervals and using a time-domain model that takes into account the non-linearities introduced by the mooring system. Numerical results for the mooring forces demands and also motions and absorbed power, are presented for two different mooring configurations for a system consisting of a hemispherical buoy in regular waves and assuming a liner PTO.

scholarly journals Initial conceptual demonstration of control co-design for WEC optimization

2020 ◽  
Author(s):  
Ryan G. Coe ◽  
Giorgio Bacelli ◽  
Sterling Olson ◽  
Vincent S. Neary ◽  
Mathew B. R. Topper
Keyword(s):  
Design Optimization ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Short Paper ◽  
Energy Converter ◽  
Matlab Toolbox ◽  
Wave Energy Converters ◽  
Practical Engineering ◽  
Converter Design ◽  
Energy Converters

While some engineering fields have benefited from systematic design optimization studies, wave energy converters have yet to successfully incorporate such analyses into practical engineering workflows. The current iterative approach to wave energy converter design leads to suboptimal solutions. This short paper presents an open-source MATLAB toolbox for performing design optimization studies on wave energy converters where power take-off behavior and realistic constraints can be easily included. This tool incorporates an adaptable control co-design approach, in that a constrained optimal controller is used to simulate device dynamics and populate an arbitrary objective function of the user's choosing. A brief explanation of the tool's structure and underlying theory is presented. In order to demonstrate the capabilities of the tool, verify its functionality, and begin to explore some basic wave energy converter design relationships, three conceptual case studies are presented. In particular, the importance of considering (and constraining) the magnitudes of device motion and forces is shown.<br>

Preliminary Cross-Validation of Wave Energy Converter Array Interactions

2013 ◽  
Author(s):  
Matt Folley ◽  
Trevor Whittaker
Keyword(s):  
Numerical Model ◽  
Wave Energy ◽  
Cross Validation ◽  
Wave Energy Converter ◽  
Energy Yield ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
The Cost ◽  
Wave Farm ◽  
Energy Converters

The development of wave energy for utility-scale electricity production requires an understanding of how wave energy converters will interact with each other when part of a wave farm. Without this understanding it is difficult to calculate the energy yield from a wave farm and consequently the optimal wave farm layout and configuration cannot be determined. In addition, the uncertainty in a wave farm’s energy yield will increase the cost of finance for the project, which ultimately increases the cost of energy. Numerical modelling of wave energy converter arrays, based on potential flow, has provided some initial indications of the strength of array interactions and optimal array configurations; however, there has been limited validation of these numerical models. Moreover, the cross-validation that has been completed has been for relatively small arrays of wave energy converters. To provide some validation for large array interactions wave basin testing of three different configurations of up to 24 wave energy converters has been completed. All tests used polychromatic (irregular) sea-states, with a range of long-crested and short-crested seas, to provide validation in realistic conditions. The physical model array interactions are compared to those predicted by a numerical model and the suitability of the numerical and physical models analysed. The results are analysed at three different levels and all provide support for the cross-validation of the two models. The differences between the physical and numerical model are also identified and the implications for improving the modelling discussed.

Constrained Optimal Control of a Heaving Buoy Wave-Energy Converter

2010 ◽  
Vol 133 (1) ◽  
Author(s):  
Jørgen Hals ◽  
Johannes Falnes ◽  
Torgeir Moan
Keyword(s):  
Energy Absorption ◽  
Wave Energy ◽  
Optimal Operation ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Energy Converter ◽  
Model Predictive Controller ◽  
Wave Energy Converters ◽  
Predictive Controller ◽  
Energy Converters

The question of optimal operation of wave-energy converters has been a key issue since modern research on the topic emerged in the early 1970s, and criteria for maximum wave-energy absorption soon emerged from frequency domain analysis. However, constraints on motions and forces give the need for time-domain modeling, where numerical optimization must be used to exploit the full absorption potential of an installed converter. A heaving, semisubmerged sphere is used to study optimal constrained motion of wave-energy converters. Based on a linear model of the wave-body interactions, a procedure for the optimization of the machinery force is developed and demonstrated. Moreover, a model-predictive controller is defined and tested for irregular sea. It repeatedly solves the optimization problem online in order to compute the optimal constrained machinery force on a receding horizon. The wave excitation force is predicted by use of an augmented Kalman filter based on a damped harmonic oscillator model of the wave process. It is shown how constraints influence the optimal motion of the heaving wave-energy converter, and also how close it is possible to approach previously published theoretical upper bounds. The model-predictive controller is found to perform close to optimum in irregular waves, depending on the quality of the wave force predictions. An absorbed power equal to or larger than 90% of the ideal constrained optimum is achieved for a chosen range of realistic sea states. Under certain circumstances, the optimal wave-energy absorption may be better in irregular waves than for a corresponding regular wave having the same energy period and wave-power level. An argument is presented to explain this observation.

scholarly journals On the Development of an Offshore Version of the CECO Wave Energy Converter

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1036 ◽  
Author(s):  
Gianmaria Giannini ◽  
Paulo Rosa-Santos ◽  
Victor Ramos ◽  
Francisco Taveira-Pinto
Keyword(s):  
Wave Energy ◽  
Time Domain ◽  
System Performance ◽  
Energy Production ◽  
Design Methodology ◽  
The Other ◽  
Mooring System ◽  
Wave Energy Conversion ◽  
Energy Converter ◽  
Wave Energy Converters

Offshore locations present significant amounts of wave energy and free sea space, which could facilitate the deployment of larger numbers of wave energy converters (WECs) in comparison with nearshore regions. The present study aims to find a suitable design for an offshore floating version of CECO, a sloped motion WEC. For this purpose, a new design methodology is proposed in this paper for identifying and assessing possible floating configurations of CECO, which consists of four distinct set-ups obtained by varying the type of main supporting structure and the mooring system. Two options are based on spar designs and the other two on tension leg platform (TLP) designs. Based on outcomes of time-domain numerical calculations, the aforementioned configurations were assessed in terms of annual wave energy conversion and magnitude of mooring loads. Results indicate that a TLP configuration with an innovative mooring solution could increase the annual energy production by 40% with respect to the fixed version of CECO. Besides, the mooring system is found to be a key component, influencing the overall system performance.

Towards a Definition and Metric for the Survivability of Ocean Wave Energy Converters

2010 ◽  
Author(s):  
Adam Brown ◽  
Robert Paasch ◽  
Irem Y. Tumer ◽  
Pukha Lenee-Bluhm ◽  
Justin Hovland ◽  
...  
Keyword(s):  
Wave Energy ◽  
Energy Content ◽  
Ocean Waves ◽  
Wave Energy Converter ◽  
Ocean Wave ◽  
Energy Converter ◽  
Term Survival ◽  
Wave Energy Converters ◽  
Ocean Wave Energy ◽  
Energy Converters

Survivability is a term that is widely used in the ocean wave energy industry, but the term has never been defined in that context. The word itself seems to have an intrinsic meaning that people understand; this fact often leads to the term’s misuse and its confusion with “reliability”. In order to design systems that are capable of long term survival in the ocean environment, it must be clear what “survivability” means and how it affects the design process and ultimately the device being deployed. Ocean energy is relatively predictable over the span of months, days, and even hours, which makes it very promising as a form of renewable energy. However, the variation of the energy content of ocean waves in a given location is likely high due to the effect of storms and the seasons. Wave energy converters must be built to be reliable while operating and survivable during severe conditions. Therefore, probabilistic design practices must be used to insure reliability and survivability in conditions that are constantly changing. Reliability is used to numerically express the failures of a device that occur while the system is operational, and it is usually expressed in terms of the mean time between failure (MTBF). However, in the context of ocean wave energy converters, the devices are likely to be continuously deployed in conditions that push them beyond their operating limits. During these times it is likely that wave energy converters will be placed in some sort of “survival mode” where the device sheds excess power, reducing system loading. Survivability is focused specifically on failures that occur during these times, when the device is experiencing conditions that surpass its operational limits. Developing a highly survivable wave energy converter is an outstanding goal, but without a standard definition of the term survivability, progress towards that goal cannot be measured. The purpose of this paper is to provide an initial definition for survivability, and to introduce a simple metric that provides an objective comparison of the survivability of varying wave energy converter technologies.

scholarly journals A Study on Electrical Power for Multiple Linear Wave Energy Converter Considering the Interaction Effect

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2964 ◽  
Author(s):  
Qiao Li ◽  
Motohiko Murai ◽  
Syu Kuwada
Keyword(s):  
Wave Energy ◽  
Interference Effect ◽  
Electrical Power ◽  
Wave Energy Converter ◽  
Energy Converter ◽  
Multiple Wave ◽  
Floating Structures ◽  
Wave Energy Converters ◽  
Electrical Generator ◽  
Energy Converters

A linear electrical generator can be used on wave energy converter for converting the kinetic energy of a floating structure to the electricity. A wave farm consists of multiple wave energy converters which equipped in a sea area. In the present paper, a numerical model is proposed considering not only the interference effect in the multiple floating structures, but also the controlling force of each linear electrical generator. In particular, the copper losses in the electrical generator is taken into account, when the electrical power is computed. In a case study, the heaving motions and electrical powers of the multiple wave energy converters are estimated in the straight arrangement and triangle arrangement. In addition, the average electrical power is analyzed in different distances of the floating structures. The aim of this paper is to clear the relationship between the interference effect and electric powers from wave energy converters. This will be useful for deciding the arrangement of multiple wave energy converters.

scholarly journals Initial conceptual demonstration of control co-design for WEC optimization

2020 ◽  
Vol 6 (4) ◽  
pp. 441-449
Author(s):  
Ryan G. Coe ◽  
Giorgio Bacelli ◽  
Sterling Olson ◽  
Vincent S. Neary ◽  
Mathew B. R. Topper
Keyword(s):  
Design Optimization ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Short Paper ◽  
Energy Converter ◽  
Matlab Toolbox ◽  
Wave Energy Converters ◽  
Practical Engineering ◽  
Converter Design ◽  
Energy Converters

AbstractWhile some engineering fields have benefited from systematic design optimization studies, wave energy converters have yet to successfully incorporate such analyses into practical engineering workflows. The current iterative approach to wave energy converter design leads to sub-optimal solutions. This short paper presents an open-source MATLAB toolbox for performing design optimization studies on wave energy converters where power take-off behavior and realistic constraints can be easily included. This tool incorporates an adaptable control co-design approach, in that a constrained optimal controller is used to simulate device dynamics and populate an arbitrary objective function of the user’s choosing. A brief explanation of the tool’s structure and underlying theory is presented. To demonstrate the capabilities of the tool, verify its functionality, and begin to explore some basic wave energy converter design relationships, three conceptual case studies are presented. In particular, the importance of considering (and constraining) the magnitudes of device motion and forces in design optimization is shown.

scholarly journals Initial conceptual demonstration of control co-design for WEC optimization

2020 ◽  
Author(s):  
Ryan G. Coe ◽  
Giorgio Bacelli ◽  
Sterling Olson ◽  
Vincent S. Neary ◽  
Mathew B. R. Topper
Keyword(s):  
Design Optimization ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Short Paper ◽  
Energy Converter ◽  
Matlab Toolbox ◽  
Wave Energy Converters ◽  
Practical Engineering ◽  
Converter Design ◽  
Energy Converters

While some engineering fields have benefited from systematic design optimization studies, wave energy converters have yet to successfully incorporate such analyses into practical engineering workflows. The current iterative approach to wave energy converter design leads to suboptimal solutions. This short paper presents an open-source MATLAB toolbox for performing design optimization studies on wave energy converters where power take-off behavior and realistic constraints can be easily included. This tool incorporates an adaptable control co-design approach, in that a constrained optimal controller is used to simulate device dynamics and populate an arbitrary objective function of the user's choosing. A brief explanation of the tool's structure and underlying theory is presented. In order to demonstrate the capabilities of the tool, verify its functionality, and begin to explore some basic wave energy converter design relationships, three conceptual case studies are presented. In particular, the importance of considering (and constraining) the magnitudes of device motion and forces is shown.<br>

scholarly journals Transverse motion instability of a submerged moored buoy

2019 ◽  
Vol 475 (2221) ◽  
pp. 20180459 ◽  
Author(s):  
J. Orszaghova ◽  
H. Wolgamot ◽  
S. Draper ◽  
R. Eatock Taylor ◽  
P. H. Taylor ◽  
...  
Keyword(s):  
Wave Energy ◽  
Period Doubling ◽  
Vertical Cylinder ◽  
Mathieu Equation ◽  
Offshore Structures ◽  
Irregular Waves ◽  
Transverse Motion ◽  
Wave Direction ◽  
Wave Energy Converters ◽  
Energy Converters

Wave energy converters and other offshore structures may exhibit instability, in which one mode of motion is excited parametrically by motion in another. Here, theoretical results for the transverse motion instability (large sway oscillations perpendicular to the incident wave direction) of a submerged wave energy converter buoy are compared to an extensive experimental dataset. The device is axi-symmetric (resembling a truncated vertical cylinder) and is taut-moored via a single tether. The system is approximately a damped elastic pendulum. Assuming linear hydrodynamics, but retaining nonlinear tether geometry, governing equations are derived in six degrees of freedom. The natural frequencies in surge/sway (the pendulum frequency), heave (the springing motion frequency) and pitch/roll are derived from the linearized equations. When terms of second order in the buoy motions are retained, the sway equation can be written as a Mathieu equation. Careful analysis of 80 regular wave tests reveals a good agreement with the predictions of sub-harmonic (period-doubling) sway instability using the Mathieu equation stability diagram. As wave energy converters operate in real seas, a large number of irregular wave runs is also analysed. The measurements broadly agree with a criterion (derived elsewhere) for determining the presence of the instability in irregular waves, which depends on the level of damping and the amount of parametric excitation at twice the natural frequency.

Sign in / Sign up

Export Citation Format

Share Document