scholarly journals Bacterial Flagellum versus Carbon Nanotube: A Review Article on the Potential of Bacterial Flagellum as a Sustainable and Green Substance for the Synthesis of Nanotubes

2020 ◽  
Vol 13 (1) ◽  
pp. 21
Author(s):  
Charles Ng Wai Chun ◽  
Husnul Azan Tajarudin ◽  
Norli Ismail ◽  
Baharin Azahari ◽  
Muaz Mohd Zaini Makhtar ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Basal Body ◽  
Research Area ◽  
Review Article ◽  
Nanometer Scale ◽  
Structural Components ◽  
Bacterial Flagellum ◽  
Bacterial Flagella

Bacterial flagella are complex multicomponent structures that help in cell locomotion. It is composed of three major structural components: the hook, the filament and basal body. The special mechanical properties of flagellar components make them useful for the applications in nanotechnology especially in nanotube formation. Carbon nanotubes (CNTs) are nanometer scale tube-shaped material and it is very useful in many applications. However, the production of CNTs is costly and detrimental to the environment as it pollutes the environment. Therefore, bacterial flagella have become a highly interesting research area especially in producing bacterial nanotubes that could replace CNTs. In this review article, we will discuss about bacterial flagellum and carbon nanotubes in the context of their types and applications. Then, we will focus and review on the characteristics of bacterial flagellum in comparison to carbon nanotubes and subsequently, the advantages of bacterial flagellum as nanotubes in comparison with carbon nanotubes.

Mechanical Properties Of Polyaniline / Multi-walled Carbon Nanotube Composite Films

2003 ◽  
Vol 791 ◽  
Author(s):  
P. C. Ramamurthy ◽  
W. R. Harrell ◽  
R. V. Gregory ◽  
B. Sadanadan ◽  
A. M. Rao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Composite Films ◽  
Weight Percent ◽  
Organic Electronic Devices ◽  
Multiwalled Carbon ◽  
Multi Walled Carbon Nanotube ◽  
Contact Devices ◽  
Carbon Nanotube Composite

ABSTRACTHigh molecular weight polyaniline / multi-walled carbon nanotube composite films were fabricated using solution processing. Composite films with various weight percentages of multiwalled carbon nanotubes were fabricated. Physical properties of these composites were analyzed by thermogravimetric analysis, tensile testing, and scanning electron microscopy. These results indicate that the addition of multiwalled nanotubes to polyaniline significantly enhances the mechanical properties of the films. In addition, metal–semiconductor (composite) (MS) contact devices were fabricated, and it was observed that the current level in the films increased with increasing multiwalled nanotube content. Furthermore, it was observed that polyaniline containing one weight percent of carbon nanotubes appears to be the most promising composition for applications in organic electronic devices.

Electronic and Mechanical Properties of Super Carbon Nanotube Networks

2006 ◽  
Vol 963 ◽  
Author(s):  
Vitor R. Coluci ◽  
Socrates O. Dantas ◽  
Ado Jorio ◽  
Douglas s Galvao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Tight Binding ◽  
Deformation Mechanisms ◽  
Different Types ◽  
Dynamics Simulations ◽  
Walled Carbon Nanotubes ◽  
Carbon Nanotube Networks ◽  
Main Deformation

ABSTRACTEletronic and mechanical properties of ordered carbon nanotube networks are studied using molecular dynamics simulations and tight-binding calculations. These networks are formed by single walled carbon nanotubes (SWNT) regularly connected by junctions. The use of different types of junctions (“Y”-, “X”-like junctions, for example) allows the construction of networks with different symmetries. These networks can be very flexible and the elastic deformation was associated with two main deformation mechanisms (bending and stretching ) of the constituents SWNTs. Rolling up the networks, “super” carbon nanotubes can be constructed. These super-tubes share some of the main electronic features of the SWNT which form them but important changes are predicted (e.g. reduction of bandgap value). Simulations of their deformations under tensile stress have revealed that the super-tubes are softer than the corresponding SWNT and that their rupture occur in higher strain values.

The influence of functionalization time of carbon nanotube on the mechanical properties of the epoxy composites

2017 ◽  
Vol 51 (12) ◽  
pp. 1693-1701 ◽  
Author(s):  
EA Zakharychev ◽  
EN Razov ◽  
Yu D Semchikov ◽  
NS Zakharycheva ◽  
MA Kabina
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Carbon Nanotube ◽  
Composite Materials ◽  
Polymer Composites ◽  
Epoxy Composites ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

This paper investigates the structure, length, and percentage of functional groups of multi-walled carbon nanotubes (CNT) depending on the time taken for functionalization in HNO3 and H2SO4 mixture. The carbon nanotube content and influence of functionalization time on mechanical properties of polymer composite materials based on epoxy matrix are studied. The extreme dependencies of mechanical properties of carbon nanotube functionalization time of polymer composites were established. The rise in tensile strength of obtained composites reaches 102% and elastic modulus reaches 227% as compared to that of unfilled polymer. The composites exhibited best mechanical properties by including carbon nanotube with 0.5 h functionalization time.

Characterization of Mechanical Properties of Carbon Nanotubes in Copper-Matrix Nanocomposites

2006 ◽  
Author(s):  
Seunghyun Baik ◽  
Byeongsoo Lim ◽  
Bumjoon Kim ◽  
Untae Sim ◽  
Seyoung Oh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Pure Copper ◽  
Copper Matrix ◽  
Mixing Process ◽  
Mechanical Mixing ◽  
Matrix Nanocomposites ◽  
Coated Carbon

Carbon nanotubes have received considerable attention because of their excellent mechanical properties. In this study, carbon nanotube - copper composites have been sintered by a mechanical mixing process. The interfacial bonding between nanotubes and the copper matrix was improved by coating nanotubes with nickel. Sintered pure copper samples were used as control materials. The displacement rate of nanotube-copper composites was found to increase at 200°C whereas that of nickel-coated nanotue-copper composites significantly decreased. The incorporation of carbon nanotubes and nickel-coated carbon nanotubes in the copper matrix decreased friction coefficients and increased the time up to the onset of scuffing compared with those of pure copper specimens.

Mechanical Properties of Functionalized Carbon Nanotube as Reinforcements

2012 ◽  
Vol 583 ◽  
pp. 22-26 ◽  
Author(s):  
Cui Cui Ling ◽  
Qing Zhong Xue ◽  
Xiao Yan Zhou
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Molecular Dynamics ◽  
Carbon Nanotube ◽  
Binding Energy ◽  
Functional Groups ◽  
Functional Group ◽  
Young Modulus ◽  
Electrostatic Energy ◽  
Walled Cnts

The effects of functional groups and degree of functionalization on the young modulus of carbon nanotubes (CNTs) are investigated through molecular dynamics and molecular mechanics simulations. It is found that young’s modulus depends greatly on the functional groups and degree of functionalization. The results show that the fluorine (-F) can replace the hydrogen, and young modulus of sing-walled CNTs (SWNT) modified by -F functional group can inherit the mechanical properties of intrinsic SWNT. The binding energy between functional groups and SWNT, and electrostatic energy among the functional groups are mainly responsible for these findings. These characteristics rival those of SWNT modified by hydrogen allow one to consider SWNT modified by -F functional group for a range of technologies, in particular require better inertness and stability than unachievable for the compound.

Evaluation of mechanical and dynamic mechanical properties of multiwalled carbon nanotube-based ethylene–propylene copolymer composites mixed by masterbatch dilution

2016 ◽  
Vol 50 (29) ◽  
pp. 4093-4101 ◽  
Author(s):  
Maija Hoikkanen ◽  
Minna Poikelispää ◽  
Amit Das ◽  
Uta Reuter ◽  
Wilma Dierkes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Aspect Ratio ◽  
Melt Mixing ◽  
Multiwalled Carbon ◽  
Mixing Processes ◽  
Ethylene Propylene ◽  
Dynamic Mechanical ◽  
Mixing Method

A two-step masterbatch mixing technique was studied for preparation of carbon nanotube-filled ethylene–propylene diene elastomer compounds, and compared to conventional one-step mixing process. In the two-step process, a masterbatch compound with carbon nanotube content of 50 parts per hundred was prepared by melt-mixing ethylene–propylene diene elastomer. This material was then compounded with pristine ethylene–propylene diene elastomer and composites with different carbon nanotube concentrations were compared. The aim of this study is to compare the efficiency of two different mixing processes on the dispersion of carbon nanotubes and to facilitate the handling of carbon nanotubes, as the masterbatch can be prepared in a controlled way and used for further dilution without the problems related to carbon nanotube processing. The compound properties were studied with emphasis on mechanical characterization and dynamic mechanical thermal analysis. Masterbatch mixing resulted in the similar mechanical properties of the composites compared to the direct mixing method. At the relatively low loadings of carbon nanotubes, the considerable improvements of the mechanical properties were observed. The aspect ratio of the carbon nanotubes determined by transmission electron microscope was found to be similar to the one calculated from the Guth equation. It showed a considerable reduction in aspect ratio independent of the used mixing method.

Effect of Reprocessing on the Rheological, Electrical and Mechanical Properties of Polypropylene/Carbon Nanotube Composites

2016 ◽  
Author(s):  
Felicia Stan ◽  
Laurentiu Ionut Sandu ◽  
Catalin Fetecau ◽  
Razvan Train Rosculet
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Injection Molding ◽  
Young Modulus ◽  
Mechanical Recycling ◽  
Nanotube Composites ◽  
Multi Walled Carbon Nanotubes ◽  
Carbon Nanotube Composites ◽  
Plastic Parts

In the near future, carbon nanotubes containing plastic parts are likely to enter the environment in large quantities and, due to their resistance to degradation, the environmental impact may be even more important than that of similarly shaped plastic products. Thus, there is an immediate need to examine and understand the effect of recycling on the properties of polymer/carbon nanotube composites in order to develop sustainable recycling technologies. In this paper, polypropylene filled with different levels of multi-walled carbon nanotubes (MWCNTs) manufactured by injection molding was closed-loop recycled in order to investigate the effect of recycling and reprocessing on its rheological, electrical and mechanical properties. Preliminary results show that the PP/MWCNT composites keep the flow performance after mechanical recycling. Moreover, the stress and strain at break increase after one reprocessing cycle (mechanical recycling coupled with injection molding) whereas no statistically significant changes in electrical conductivity, Young modulus and tensile strength of the PP/MWCNT composites filled with 1, 3 and 5 wt.% were observed.

Sign in / Sign up

Export Citation Format

Share Document