scholarly journals Integrating Solar Photovoltaics in Residential Buildings: Towards Zero Energy Buildings in Hail City, KSA

2021 ◽  
Vol 13 (4) ◽  
pp. 1845
Author(s):  
Mohamed Hssan Hassan Abdelhafez ◽  
Mabrouk Touahmia ◽  
Emad Noaime ◽  
Ghazy Abdullah Albaqawy ◽  
Khaled Elkhayat ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Co2 Emissions ◽  
Tilt Angle ◽  
Residential Buildings ◽  
Performance Ratio ◽  
Energy Sources ◽  
System Efficiency ◽  
Zero Energy ◽  
Pv System ◽  
Pv Module

In recent years, most cities have faced great demand for electricity supply due to rapid population growth and industrialization. Supplying sufficient electrical energy, while reducing greenhouse gas emissions, is one of the major concerns of policymakers and scientists all over the world. In Saudi Arabia, local authorities are increasingly aware of the necessity of reducing the environmental impact of nonrenewable energy by exploring alternative sustainable energy sources and improving buildings’ energy efficiency. Recently, building-integrated photovoltaic (BIPV) technology has been regarded as a promising technology for generating instantaneous sustainable energy for buildings. To achieve a substantial contribution regarding zero energy buildings, solar energy should be widely used in residential buildings within the urban context. This paper examines how to achieve an appropriate model for integrating photovoltaics on the rooftop of residential buildings in Hail city to provide alternative energy sources. The estimated rooftop areas in Hail city, utilizable for PV application were calculated. Using PV*SOL simulation software, the performance ratio and the system efficiency, as well as the annual energy output in several tilt angles, were determined and presented. The amount of energy expected when using all effective roof area in the city was also calculated. The amount of CO2 emissions that could be reduced as a result of using a PV system was estimated. The results show a significant area of rooftop suitable for PV system in residential buildings in Hail city, which exceeds 9 million square meters. On the other hand, the performance ratio and the system efficiency are affected by the tilt angle of the PV module, where the efficiency increases with higher tilt angle, this is due to the PV module temperature, where, with the decrease in the PV module temperature its efficiency increases. The results indicate that the 30° tilt PV produced the highest amount of energy, whereas the 75° tilt PV records the smallest one although it achieves the best possible efficiency. There is a significant amount of energy produced from the use of all residential rooftops in Hail, and there is also a significant reduction in the amount of CO2 emissions. It is expected that this research would develop innovative building design strategies and specifications allowing for better climate and energy efficiency as well.

Performance assessment of free standing and building integrated grid connected photovoltaic system for southern part of India

2020 ◽  
pp. 014362442097774
Author(s):  
VS Chandrika ◽  
M Mohamed Thalib ◽  
Alagar Karthick ◽  
Ravishankar Sathyamurthy ◽  
A Muthu Manokar ◽  
...  
Keyword(s):  
Geographical Location ◽  
Photovoltaic System ◽  
Building Structures ◽  
System Efficiency ◽  
Pv System ◽  
Free Standing ◽  
Pv Module ◽  
Building Integrated Photovoltaic ◽  
Community Buildings ◽  
Equatorial Climate

Photovoltaic (PV) system efficiency depends on the geographical location and the orientation of the building. Until installing the building structures, the integration of the PV module must be evaluated with ventilation and without ventilation effects. This work optimises the performance of the 250 kWp grid-connected photovoltaic (GPV) for community buildings in the southern part of India. This simulation is carried out to evaluate the system efficiency of the GPV system under various ventilation conditions, such as free-standing PV (FSPV), building integrated photovoltaic ventilated (BIPV_V) and Building Integrated Photovoltaic without ventilation (BIPV). The PVsyst simulation tool is used to simulate and optimise the performance of the system with FSPV, BIPV and BIPV_V for the region of Chennai (13.2789° N, 80.2623° E), Tamilnadu, India. An annual system energy production is 446 MWh, 409 MWh and 428 MWh of FSPV, BIPV and BIPV_V system respectively. while electrical efficiency for the FSPV, BIPV_V, BIPV system is 15.45%. 15.25% and 14.75% respectively. Practical application: Integrating the grid connected photovoltaic system on the building reduces the energy consumption in the building. The integration of the PV on the roof or semi integrated on the roof is need to be investigated before installing on the buildings. The need for installation of the BIPV with ventilation is explored. This study will assist architects and wider community to design buildings roofs with GPV system which are more aesthetic and account for noise protection and thermal insulation in the region of equatorial climate zones.

scholarly journals Optimisation of Energy Accumulation for Renewable Energy Sources

2021 ◽  
Vol 19 ◽  
pp. 205-210
Author(s):  
Milan Belik ◽  
Keyword(s):  
Renewable Energy ◽  
Model Building ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Photovoltaic System ◽  
Energy Sources ◽  
Pv System ◽  
Energy Accumulation ◽  
Wind Power Station ◽  
Future Production

This project focuses on optimisation of energy accumulation for various types of distributed renewable energy sources. The main goal is to prepare charging – discharging strategy depending on actual power consumption and prediction of consumption and production of utilised renewable energy sources for future period. The simulation is based on real long term data measured on photovoltaic system, wind power station and meteo station between 2004 – 2021. The data from meteo station serve as the input for the simulation and prediction of the future production while the data from PV system and wind turbine are used either as actual production or as a verification of the predicted values. Various parameters are used for trimming of the optimisation process. Influence of the charging strategy, discharging strategy, values and shape of the demand from the grid and prices is described on typical examples of the simulations. The main goal is to prepare and verify the system in real conditions with real load chart and real consumption defined by the model building with integrated renewable energy sources. The system can be later used in general installations on commercial or residential buildings.

scholarly journals Performance Evaluation of 100kWp Roof-top Grid-connected PV System installed in Northern India

2019 ◽  
Vol 8 (3) ◽  
pp. 8441-8444 ◽  
Keyword(s):  
Degradation Rate ◽  
Capacity Utilization ◽  
Plant Performance ◽  
Performance Ratio ◽  
Energy Output ◽  
System Efficiency ◽  
Pv System ◽  
Utilization Factor ◽  
Northern India ◽  
Efficiency Performance

The performance of 100 kWp roof-top grid-connected PV system was evaluated. The plant was installed at PGDM building in Sharda University, Greater Noida in northern India. The plant was monitored from March 2018 to February 2019. Performance parameters such as system efficiency, performance ratio, capacity utilization factor, and degradation rate were obtained. The plant performance result was compared with the estimated results obtained from SAM and PVsyst software. The total annual energy output was found to be 16426 kWh. The annual average system efficiency and capacity utilization factor of the plant was found to be 15.62 % and 14.72 % respectively. The annual performance ratio and annual degradation rate were found to be 76% and 1.28%/year respectively. The annual performance ratio obtained from SAM and PVsyst was found to be 78% and 82% respectively. It was noticed that the measured performance ratio was highly relative with the one obtained from SAM software.

scholarly journals Energy Efficiency – Indoor Air Quality Dilemma in Educational Buildings: A Possible Solution

2020 ◽  
Vol 24 (1) ◽  
pp. 357-367
Author(s):  
Liva Asere ◽  
Andra Blumberga
Keyword(s):  
Energy Efficiency ◽  
Renewable Energy ◽  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Pv System ◽  
Educational Buildings ◽  
Electricity Tariff

AbstractThe energy efficiency – indoor air quality dilemma is well known and the main drawback to operate the mechanical ventilation is electricity costs as concluded from previous studies. Educational buildings are one of the places where future taxpayers spend a lot of time. This paper aims to study an alternative solution on how to reduce energy efficiency – indoor air quality dilemma in educational buildings by adopting systems that use renewable energy sources. A typical education building in Latvia is taken as a case study by changing it from a consumer to prosumer. This building type has a specific electricity usage profile that makes the choice of photovoltaics (PV) power quite challenging so the various power options have been analysed and used for an electricity solution. Also, the more decentralised preference is chosen – disconnect from a public heating provider and using a local system with a pellet boiler. Educational buildings using PV can reduce the electricity tariff, but the payback periods are still not very satisfactory without subsidies. The average electricity tariff per month varies between scenarios and the best one is for the scenario with 30 kW installed power. The educational building partly using 16 kW PV system reduces not only its bill for electricity but also reduces CO2 emissions by around 36 tons. The education buildings as energy prosumers using renewable energy sources are reducing GHG emissions by having high indoor air quality.

scholarly journals Energy benchmarking in educational buildings in the city of Kragujevac - possibilities for energy efficiency improvement

2021 ◽  
Vol 18 (1) ◽  
pp. 95-114
Author(s):  
Ana Radojevic ◽  
Danijela Nikolic ◽  
Jasna Radulovic ◽  
Jasmina Skerlic
Keyword(s):  
Energy Efficiency ◽  
Renewable Energy ◽  
Energy Consumption ◽  
Co2 Emissions ◽  
Renewable Energy Sources ◽  
Electricity Consumption ◽  
Energy Sources ◽  
Efficiency Improvement ◽  
Energy Efficiency Improvement ◽  
Energy Benchmarking

The implementation of energy efficiency measures and use of renewable energy sources in educational buildings can significantly contribute to reducing energy consumption, but also to CO2 emissions in the entire public sector. The paper shows the comparison of energy consumption indicators for 61 elementary school buildings which have previously been divided in 12 groups, according to the period of construction and size, based on the national typology called TABULA, as the first step of further study on how to use the renewable energy sources. The aim of this paper is to use the energy benchmarking process to select representative facilities which are suitable for applying renewable energy sources, for their further energy efficiency improvement. Indicators of annual specific electricity consumption and CO2 emissions per unit area [kWh/m2] and per user [kWh/user] were calculated. After that, from two groups (in which the highest electricity consumption and CO2 emissions are 68.37% and 74.53% of the total consumption/ emissions), one representative facility was selected.

scholarly journals Photovoltaic systems – types of installations, materials, monitoring and modeling - review

2020 ◽  
pp. 40-49 ◽  
Author(s):  
Angelika Anduła ◽  
Dariusz Heim
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Future Research ◽  
Photovoltaic Systems ◽  
Zero Energy ◽  
Thermal Systems ◽  
Photovoltaic Panels ◽  
Common Solution

Photovoltaic systems have become a common solution for, both small residential buildings as well as large service buildings. When buildings are being designed, it is important to focus on the aspect of the object’s energy efficiency as lowering the energy consumption of a given facility is crucial. The article discusses the use of photovoltaic panels such as so-called BAPV (Building Applied Photovoltaics) and BIPV (Building Installed Photovoltaics) installations as well as photovoltaic thermal systems (PV/T), which generate both electricity and heat. The role of PV installation in so-called zero energy buildings and proposals for future research and solutions are also discussed.

scholarly journals Targeting Energy Efficiency through Air Conditioning Operational Modes for Residential Buildings in Tropical Climates, Assisted by Solar Energy and Thermal Energy Storage. Case Study Brazil

2021 ◽  
Vol 13 (22) ◽  
pp. 12831
Author(s):  
Alex Ximenes Naves ◽  
Laureano Jiménez Esteller ◽  
Assed Naked Haddad ◽  
Dieter Boer
Keyword(s):  
Energy Efficiency ◽  
Life Cycle ◽  
Energy Storage ◽  
Air Conditioning ◽  
Residential Buildings ◽  
Zero Energy ◽  
Net Zero Energy ◽  
Net Zero ◽  
Life Cycle Perspective ◽  
Operational Modes

Economy and parsimony in the consumption of energy resources are becoming a part of common sense in practically all countries, although the effective implementation of energy efficiency policies still has a long way to go. The energy demand for residential buildings is one of the most significant energy sinks. We focus our analysis on one of the most energy-consuming systems of residential buildings located in regions of tropical climate, which are cooling systems. We evaluate to which degree the integration of thermal energy storage (TES) and photovoltaic (PV) systems helps to approach an annual net zero energy building (NZEB) configuration, aiming to find a feasible solution in the direction of energy efficiency in buildings. To conduct the simulations, an Energy Efficiency Analysis Framework (EEAF) is proposed. A literature review unveiled a potential knowledge gap about the optimization of the ASHRAE operational modes (full storage load, load leveled, and demand limiting) for air conditioning/TES sets using PV connected to the grid. A hypothetical building was configured with detailed loads and occupation profiles to simulate different configurations of air conditioning associated with TES and a PV array. Using TRNSYS software, a set of scenarios was simulated, and their outputs are analyzed in a life cycle perspective using life cycle costing (LCC). The modeling and simulation of different scenarios allowed for identifying the most economic configurations from a life cycle perspective, within a safe range of operability considering the energy efficiency and consequently the sustainability aspects of the buildings. The EEAF also supports other profiles, such as those in which the occupancy of residential buildings during the day is increased due to significant changes in people’s habits, when working and studying in home office mode, for example. These changes in habits should bring a growing interest in the adoption of solar energy for real-time use in residential buildings. The results can be used as premises for the initial design or planning retrofits of buildings, aiming at the annual net zero energy balance.

scholarly journals Towards Nearly-Zero Energy in Heritage Residential Buildings Retrofitting in Hot, Dry Climates

2021 ◽  
Vol 13 (24) ◽  
pp. 13934
Author(s):  
Hanan S. S. Ibrahim ◽  
Ahmed Z. Khan ◽  
Yehya Serag ◽  
Shady Attia
Keyword(s):  
Renewable Energy ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Energy Performance ◽  
High Energy ◽  
Energy Sources ◽  
Zero Energy ◽  
Building Stock ◽  
Heritage Buildings ◽  
Dry Climates

Retrofitting “nearly-zero energy” heritage buildings has always been controversial, due to the usual association of the “nearly-zero energy” target with high energy performance and the utilization of renewable energy sources in highly regarded cultural values of heritage buildings. This paper aims to evaluate the potential of turning heritage building stock into a “nearly-zero energy” in hot, dry climates, which has been addressed in only a few studies. Therefore, a four-phase integrated energy retrofitting methodology was proposed and applied to a sample of heritage residential building stock in Egypt along with microscale analysis on buildings. Three reference buildings were selected, representing the most dominant building typologies. The study combines field measurements and observations with energy simulations. In addition, simulation models were created and calibrated based on monitored data in the reference buildings. The results show that the application of hybrid passive and active non-energy generating scenarios significantly impacts energy use in the reference buildings, e.g., where 66.4% of annual electricity use can be saved. Moreover, the application of solar energy sources approximately covers the energy demand in the reference buildings, e.g., where an annual self-consumption of electricity up to 78% and surplus electricity up to 20.4% can be achieved by using photo-voltaic modules. Furthermore, annual natural gas of up to 66.8% can be saved by using two unglazed solar collectors. Lastly, achieving “nearly-zero energy” was possible for the presented case study area. The originality of this work lies in developing and applying an informed retrofitting (nearly-zero energy) guide to be used as a benchmark energy model for buildings that belong to an important historical era. The findings contribute to fill a gap in existing studies of integrating renewable energy sources to achieve “nearly-zero energy” in heritage buildings in hot climates.

scholarly journals Design of Graphical User Interface Development Environment Software for sizing of Grid Connected Photovoltaic (GCPV) system

2018 ◽  
Vol 7 (3.15) ◽  
pp. 145
Author(s):  
S Z.Mohammad Noor ◽  
S Zaini ◽  
A M.Omar
Keyword(s):  
User Interface ◽  
System Design ◽  
Graphical User Interface ◽  
Performance Ratio ◽  
Specific Yield ◽  
Pv System ◽  
Development Environment ◽  
Array Configuration ◽  
Pv Module ◽  
And Performance

This work presents a design of graphical user interface development environment (GUIDE) software for sizing of Grid Connected Photovoltaic (GCPV) system. The simulation model of the GCPV system design is developed by using GUIDE in MATLAB. The developed GUI display the performance of the PV system based on the three scenarios. The three scenarios are sizing based on architecture constraint, the energy required and budget constraint. The size of the GCPV system is from 4.6 kW to 60.0 kW. A GUIDE is developed to design and calculate the suitable size of photovoltaic (PV) module, analyses the optimum array configuration, selection of inverter, size of cable, determine the specific yield and performance ratio. The GUI be able to make a user’s job easier and beneficial in assisting the GCPV system design process compared to the manual calculation of the GCPV system.  

scholarly journals Monitoring Data Study of the Performance of Renewable Energy Systems in a Near Zero Energy Building in Spain: A Case Study

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2979 ◽  
Author(s):  
Javier Rey-Hernández ◽  
Eloy Velasco-Gómez ◽  
Julio San José-Alonso ◽  
Ana Tejero-González ◽  
Sergio González-González ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Co2 Emissions ◽  
Energy Demand ◽  
Energy Performance ◽  
Monitoring Data ◽  
Substantial Part ◽  
The European Union ◽  
Zero Energy ◽  
Pv System ◽  
Zero Energy Building

The building sector is responsible for a substantial part of the energy consumption and corresponding CO2 emissions. The European Union has consequently developed various directives, among which the updated Energy Performance of Buildings Directive 2018/844/EU stands out, aiming at minimizing the energy demand in buildings, improving the energy efficiency of their facilities and integrating renewable energies. The objective of the present study was to develop an analysis on the energy performance, related CO2 emissions and operating costs of the renewable energy technologies implemented within a multipurpose near Zero Energy Building (nZEB). The target building is an existing nZEB called LUCIA, located in Valladolid (Spain). Monitoring data provides the required information on the actual needs for electricity, cooling and heating. It is equipped with solar energy photovoltaic systems, a biomass boiler and a geothermal Earth to Air Heat Exchanger (EAHX) intended for meeting the ventilation thermal loads. All systems studied show favourable performances, but depend significantly on the particular characteristics of the building, the control algorithm and the climate of the location. Hence, design of these strategies for new nZEBs must consider all these factors. The combined use of the PhotoVoltaic PV System, the biomass and the EAHX reduces the CO2 emissions up to 123 to 170 tons/year in comparison with other fuels, entailing economic savings from the system operation of up to 43,000–50,000 €/year.

Sign in / Sign up

Export Citation Format

Share Document