scholarly journals Optimizing of Microalgae Scenedesmus sp. Biomass Production in Wet Market Wastewater Using Response Surface Methodology

2021 ◽  
Vol 13 (4) ◽  
pp. 2216
Author(s):  
Najeeha Mohd Apandi ◽  
Mimi Suliza Muhamad ◽  
Radin Maya Saphira Radin Mohamed ◽  
Norshuhaila Mohamed Sunar ◽  
Adel Al-Gheethi ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Biomass Yield ◽  
Biomass Productivity ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Aeration Rate ◽  
Composition Analysis ◽  
Wet Market ◽  
Central Composite

The present study aimed to optimize the production of Scenedesmus sp. biomass during the phycoremediation process. The biomass productivity was optimized using face centred central composite design (FCCCD) in response surface methodology (RSM) as a function of two independent variables that included wet market wastewater concentrations (A) with a range of 10% to 75% and aeration rate (B) with a range of 0.02 to 4.0 L/min. The results revealed that the highest biomass productivity (73 mg/L/d) and maximum growth rate (1.19 day−1) was achieved with the 64.26% of (A) and 3.08 L/min of (B). The GC-MS composition analysis of the biomass yield extract revealed that the major compounds are hexadecane (25%), glaucine (16.2%), and phytol (8.33%). The presence of these compounds suggests that WMW has the potential to be used as a production medium for Scenedesmus sp. Biomass, which has several applications in the pharmaceutical and chemical industry.

Enzyme-assisted Extraction for Optimized Recovery of Phenolic Bioactives from Peganum hermala Leaves Using Response Surface Methodology

2018 ◽  
Vol 17 (4) ◽  
pp. 349-354
Author(s):  
Qadir Rahman ◽  
Anwar Farooq ◽  
Amjad Gilani Mazhar ◽  
Nadeem Yaqoob Muhammad ◽  
Ahmad Mukhtar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Enzyme Concentration ◽  
Coumaric Acid ◽  
Assisted Extraction ◽  
Pre Treatment ◽  
Optimized Conditions ◽  
Enzyme Complexes ◽  
Hydrolysis Of ◽  
Central Composite

This study investigates the effect of enzyme formulations (Zympex-014, Kemzyme dry-plus and Natuzyme) on recovery of phenolics from Peganum hermala (harmal) leaves, under optimized conditions using response surface methodology. As compared to the other enzyme complexes, the yield (34 g/100g) obtained through Zympex-014-assisted extraction was higher under optimized conditions such as time (75 min), temperature (70°C), pH (6.5) and enzyme concentration (5 g/100 g) using central composite design (CCD). Effectiveness of Zympex-014 towards hydrolysis of P. hermala leaves cell wall was examined by analyzing the control and enzyme-treated leave residues using scanning electron microscope (SEM). GC/MS characterization authenticated the presence of quercetin (1.44), gallic acid (0.23), caffeic acid (0.04), cinnamic acid (0.05), m-coumaric acid (0.23) and p-coumaric acid (0.37 μg/g) as the potent phenolics in Zympex-014 based extract. It can be concluded from the findings of the current work that pre-treatment of P. hermala leaves with Zympex-014 significantly enhanced the recovery of phenolics that supports its potential uses in the nutra-pharamaceutical industry.

Response Surface Methodology towards Optimization of Calotropis Procera Essential oil Extraction by using Supercritical CO2.

2019 ◽  
Vol 09 ◽  
Author(s):  
Hossein Zaeri ◽  
Bahareh Kamyab Moghadas ◽  
Bijan Honarvar ◽  
Ali Shokuhi Rad
Keyword(s):  
Response Surface Methodology ◽  
Essential Oil ◽  
Response Surface ◽  
Extraction Time ◽  
Calotropis Procera ◽  
Retrieval Rate ◽  
The Family ◽  
Effects Of Temperature ◽  
Carbon Dioxide Co2 ◽  
Central Composite

: In this research, the extraction of essential oil from Calotropis Procera with the family name of Asclepiadaceae, by supercritical carbon dioxide (CO2) solvent has been investigated in detail, and the yield and chemical profile of the extracts achieved by this method were compared with those resulted by the conventional Hydro distillation method. To optimize the process parameters of CO2 supercritical extraction (SCE) of the Calotropis Procera, the Response Surface Methodology (RSM) with central composite design (CCD) was employed. The effects of temperature, pressure, and extraction time on the oil yield are considered for investigation. Results showed that the data were sufficiently fitted into the second-order polynomial model. The extraction conditions, including pressure, temperature, and extraction time, were studied between 150-200 bar, 40-50 ºC, and 50-100 min, respectively. The optimal conditions are achieved as the temperature of 47.19ºC, the pressure of 172.2 bar, and time of 86 minutes with the retrieval rate of 31.39%.

scholarly journals Optimization of Eugenol Extraction from Clove Oil using Response Surface Methodology

2015 ◽  
Vol 9 (11) ◽  
pp. 68
Author(s):  
Widayat Widayat ◽  
Hadiyanto Hadiyanto ◽  
Bambang Cahyono ◽  
Ngadiwiyana Ngadiwiyana
Keyword(s):  
Response Surface Methodology ◽  
Optimum Condition ◽  
Central Composite Design ◽  
Response Surface ◽  
Design Method ◽  
Main Process ◽  
Clove Oil ◽  
Design Variables ◽  
Central Composite

The objective of this research was to obtain optimum condition of eugenol production from clove oil using a central composite design method. The main process occured in the eugenol production was saphonification and neutralization processes. In order to optimize these processes, the ratio of NaOH/clove oil and temperature were studied as design variables i.e. ratio of NaOH/clove oil=1:2.5-1:3.5 while temperature was varied between 40 and 60oC. The yield of eugenol was considered as the main response in of this experiment. The result showed that the optimum condition was achieved when the temperature and the ratio of NaOH/clove oil were 50oC and 2.75:1, respectively and the yield was 39.17%.<br />

scholarly journals Pembuatan Biodiesel dari Minyak Sawit Off-Grade Menggunakan Katalis CaO Melalui Proses Dua Tahap

2015 ◽  
Vol 10 (3) ◽  
Author(s):  
Febrina Dwi Putri ◽  
Zuchra Helwani ◽  
Drastinawati Drastinawati
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Central Composite

Biodiesel merupakan sumber bahan bakar alternatif yang bisa dihasilkan dari minyak nabati melalui transesterifikasi dengan metanol. Sawit Off-grade merupakan salah satu sumber minyak nabati yang mempunyai potensi untuk digunakan sebagai bahan dasar produksi biodiesel. Reaksi transesterifikasi dilangsungkan dengan bantuan katalis CaO dari cangkang telur yang dikalsinasi pada suhu 900ºC selama 2 jam. Tujuan dari penelitian ini adalah untuk memproduksi biodiesel dari minyak sawit off-grade melalui reaksi dua-tahap, melihat performa katalis Cao terhadap reaksi transesterifikasi, serta mempelajari pengaruh temperatur reaksi, rasio mol minyak:metanol dan konsentrasi katalis terhadap yield biodiesel pada reaksi transesterifikasi. Esterifikasi dilakukan pada suhu 60°C dengan perbandingan mol minyak:metanol 1:12 menggunakan 1%wt katalis H2SO4. Asam lemak bebas (ALB) tereduksi dari 16,18% menjadi 0,6%. Reaksi transesterifikasi dilakukan dengan variasi perbandingan mol minyak:metanol 1:7, 1:9, 1:11, konsentrasi katalis 2%wt, 4%wt, 6%wt, serta suhu reaksi pada 50ºC, 60ºC, 70ºC selama 2 jam. Data yang diperoleh diproses dengan menggunakan response surface methodology (RSM), sedangkan jumlah eksperimen ditentukan dengan central composite design (CCD). Yield yang diperoleh pada penelitian ini yaitu sebanyak 62,30%-87,41%. Yield optimum dihasilkan pada reaksi dengan suhu 70ºC menggunakan minyak:metanol dengan perbandingan 1:11 dan katalis CaO 2%wt. Kondisi proses yang berpengaruh terhadap yield biodiesel adalah suhu reaksi, perbandingan mol minyak:metanol, serta interaksi antara suhu dengan perbandingan mol minyak:metanol. Akan tetapi tidak ditemukan adanya pengaruh signifikan konsentrasi katalis terhadap yield biodiesel.

scholarly journals OPTIMASI TEKSTUR BUAH TOMAT SETELAH SIMULASI TRANSPORTASI MENGGUNAKAN RESPON SURFACE METODOLOGY (RSM)

2019 ◽  
Vol 7 (2) ◽  
pp. 139-147
Author(s):  
Ida Ayu Widhiantari ◽  
Sandra Sandra ◽  
Gunomo Djoyowasito
Keyword(s):  
Response Surface Methodology ◽  
Central Composite Design ◽  
Response Surface ◽  
Central Composite

Selama kegiatan transportasi buah tomat dapat mengalami kerusakan akibat adanya frekuensi getaran yang berasal dari mesin transportasi dan juga lama waktu kegiatan transportasi. Adanya getaran selama proses transportasi buah tomat dapat mempengaruhi perubahan tekstur buah tomat. Optimasi dilakukan dalam penelitian ini dengan tujuan untuk memperoleh mutu buah tomat yang optimal setelah dilakukan simulasi transportasi. Optimasi dilakukan dengan menggunakan Response Surface Methodology (RSM) central composite design (CCD) dengan dua variabel bebas yaitu frekuensi getaran (3 Hz, 6HZ, dan 9Hz) dan lama waktu penggetaran (120, 150, dan 180 menit) serta tekstur buah tomat sebagai respon. Kondisi optimum diperoleh pada frekuensi getaran  2,33 Hz dan waktu simulasi transportasi 133,42 menit dengan nilai tekstur optimum buah tomat yaitu 0,147768 dengan nilai desirability sebesar 0,928.    

scholarly journals Aplikasi Response Surface Methodology pada Optimasi Penambahan Blast Furnace Slag Terhadap Waktu Pengikatan dan Kuat Tekan Semen

2020 ◽  
Vol 4 (1) ◽  
pp. 61
Author(s):  
Hardjono Hardjono ◽  
Cucuk Evi Lusiani ◽  
Agung Ari Wibowo ◽  
Mochammad Agung Indra Iswara
Keyword(s):  
Compressive Strength ◽  
Response Surface Methodology ◽  
Blast Furnace ◽  
Response Surface ◽  
Blast Furnace Slag ◽  
Setting Time ◽  
Initial Setting Time ◽  
Initial Setting ◽  
Central Composite ◽  
Furnace Slag

Produksi semen setengah jadi (clinker) membutuhkan energi yang tinggi sehingga menggunakan batu bara dalam jumlah besar. Hal ini menyebabkan biaya produksi dari pabrik semen juga tinggi. Kebutuhan energi yang besar untuk menghasilkan clinker tersebut dapat dikurangi dengan menambahan blast furnace slag sebagai campuran pembuatan semen. Campuran clinker dapat menghasilkan produk semen yang memiliki waktu pengikatan dan kuat tekan sesuai SNI. Pengaruh penambahan blast furnace slag sebagai campuran clinker terhadap waktu pengikatan dan kuat tekan semen dapat dioptimalkan dengan response surface methodology (RSM) menggunakan Central Composite Design (CCD). Optimasi dengan menggunakan RSM bertujuan untuk mengetahui kondisi optimum pada penambahan blast furnace slag dan clinker terhadap variabel respon berupa waktu pengikatan awal, waktu pengikatan akhir, dan kuat tekan. Hasil uji ANOVA dan analisis response surface menunjukkan bahwa penambahan blast furnace slag sebagai campuran dalam pembuatan semen memberikan pengaruh yang signifikan terhadap waktu pengikatan awal, waktu pengikatan akhir, dan kuat tekan. Penambahan 5% blast furnace slag dengan 92,5% clinker pada campuran clinker dan gypsum merupakan kondisi optimum yang memberikan pengaruh signifikan terhadap variabel respon.The production of clinker consumes high energy and causes high production cost of cement industry. It can be reduced by adding blast furnace slag as a mixture in cement production. The blast furnace slag - clinker mixture can produce cement with setting time and compressive strength according to SNI. The effect of the addition of blast furnace slag as a clinker mixture to the setting time and compressive strength of cement can be optimized by response surface methodology (RSM) using Central Composite Design (CCD). Optimization by using RSM aims to determine the optimum condition of the blast furnace slag – clinker mixture to the initial setting time, final setting time, and compressive strength. ANOVA test results and response surface analysis show that the addition of blast furnace slag into the cement mixture has a significant influence on the initial setting time, final setting time, and compressive strength. The addition of  5% blast furnace slag with  92.5% clinker in the mixture of clinker and gypsum is the optimum condition which gives a significant effect on the response variable.

Sign in / Sign up

Export Citation Format

Share Document