Response Surface Methodology towards Optimization of Calotropis Procera Essential oil Extraction by using Supercritical CO2.

2019 ◽  
Vol 09 ◽  
Author(s):  
Hossein Zaeri ◽  
Bahareh Kamyab Moghadas ◽  
Bijan Honarvar ◽  
Ali Shokuhi Rad
Keyword(s):  
Response Surface Methodology ◽  
Essential Oil ◽  
Response Surface ◽  
Extraction Time ◽  
Calotropis Procera ◽  
Retrieval Rate ◽  
The Family ◽  
Effects Of Temperature ◽  
Carbon Dioxide Co2 ◽  
Central Composite

: In this research, the extraction of essential oil from Calotropis Procera with the family name of Asclepiadaceae, by supercritical carbon dioxide (CO2) solvent has been investigated in detail, and the yield and chemical profile of the extracts achieved by this method were compared with those resulted by the conventional Hydro distillation method. To optimize the process parameters of CO2 supercritical extraction (SCE) of the Calotropis Procera, the Response Surface Methodology (RSM) with central composite design (CCD) was employed. The effects of temperature, pressure, and extraction time on the oil yield are considered for investigation. Results showed that the data were sufficiently fitted into the second-order polynomial model. The extraction conditions, including pressure, temperature, and extraction time, were studied between 150-200 bar, 40-50 ºC, and 50-100 min, respectively. The optimal conditions are achieved as the temperature of 47.19ºC, the pressure of 172.2 bar, and time of 86 minutes with the retrieval rate of 31.39%.

scholarly journals Optimization of Microwave-Assisted Extraction of Essential Oil from Vietnamese Basil (Ocimum basilicum L.) Using Response Surface Methodology

Processes ◽  
2018 ◽  
Vol 6 (11) ◽  
pp. 206 ◽  
Author(s):  
Thien Tran ◽  
Huynh Nguyen ◽  
Duy Nguyen ◽  
Thanh Nguyen ◽  
Huynh Tan ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Chemical Composition ◽  
Essential Oil ◽  
Response Surface ◽  
Microwave Power ◽  
Raw Material ◽  
Extraction Time ◽  
Quadratic Model ◽  
Common Source ◽  
Microwave Assisted

Basil plant is a common source for linalool and estragole. However, it has been showed that the chemical composition of basil varies considerably depending on many factors including method of extraction, cultivar of the plant or geographical location. In this study, we attempted to extract essential oil from Vietnamese basil and analyze the chemical composition of the obtained oil using gas chromatography–mass spectrometry (GC-MS). The extraction method of choice was microwave-assisted hydro-distillation (MAHD) and the process was optimized with Response Surface Methodology (RSM) with regard to four experimental parameters including raw material size, raw material to water ratio, extraction time and microwave power. The results showed that ground basil leaves, when extracted with optimal conditions of water-to-material ratio of 3.2:1, extraction time of 97 (min) and microwave power of 430 (W), gave the actual essential oil yield of 0.6%. Regarding ANOVA results of the quadratic model, high determination coefficient (R2 = 0.9077), significant F-value of 10.92 and the p-value of less than 0.05 indicate that this model is significant between experimental and predicted variables, and should be fixed. In addition, GC-MS analysis revealed that major components of Vietnamese Basil were Estragole (87.869%), α-Bergamotene (2.922%), τ-Cadinol (2.770%), and Linalool (1.347%).

scholarly journals Optimization of Storage Conditions of the Medicinal Herb Ilex asprella against the Sterigmatocystin Producer Aspergillus versicolor Using Response Surface Methodology

Toxins ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 499
Author(s):  
Xiaofang Lu ◽  
Chaoquan Luo ◽  
Jianyong Xing ◽  
Zhengzhou Han ◽  
Tong Li ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Southern China ◽  
Storage Conditions ◽  
Raw Material ◽  
Aspergillus Versicolor ◽  
Total Saponin ◽  
Different Temperatures ◽  
Effects Of Temperature ◽  
Central Composite

The root of Ilex asprella is a commonly used herb in Southern China, and also constitutes the main raw material of Canton herbal tea. I. asprella is readily contaminated by mildew because of rich nutrients. Aspergillus versicolor producing sterigmatocystin is one of the most common molds that contaminate foodstuffs and medicinal herbs. Previous study on the evaluation of fungal contamination on samples of I. asprella revealed that A. versicolor was the dominant contaminant. In this study, experiments based on response surface methodology combined with central composite design were carried out to determine the optimal storage conditions of I. asprella to minimize the contamination of sterigmatocystin. The herb, manually innoculated with A. versicolor, was stored under different temperatures (20–40 °C) and humidity (80–95%) for seven days. The effects of temperature and humidity were evaluated using total saponin, polysaccharide and the sterigmatocystin levels as quality indexes. The results showed that A. versicolor grew quickly and produced large amounts of sterigmatocystin on I. asprella, at humidity ranging from 85% to 90% and temperatures above 26 °C. Meanwhile, total saponin and polysaccharide amounts were reduced significantly. These findings suggested that I. asprella samples should be stored in an environment with humidity and temperature below 85% and 26 °C, respectively, to reduce A. versicolor growth and sterigmatocystin production.

Enzyme-assisted Extraction for Optimized Recovery of Phenolic Bioactives from Peganum hermala Leaves Using Response Surface Methodology

2018 ◽  
Vol 17 (4) ◽  
pp. 349-354
Author(s):  
Qadir Rahman ◽  
Anwar Farooq ◽  
Amjad Gilani Mazhar ◽  
Nadeem Yaqoob Muhammad ◽  
Ahmad Mukhtar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Enzyme Concentration ◽  
Coumaric Acid ◽  
Assisted Extraction ◽  
Pre Treatment ◽  
Optimized Conditions ◽  
Enzyme Complexes ◽  
Hydrolysis Of ◽  
Central Composite

This study investigates the effect of enzyme formulations (Zympex-014, Kemzyme dry-plus and Natuzyme) on recovery of phenolics from Peganum hermala (harmal) leaves, under optimized conditions using response surface methodology. As compared to the other enzyme complexes, the yield (34 g/100g) obtained through Zympex-014-assisted extraction was higher under optimized conditions such as time (75 min), temperature (70°C), pH (6.5) and enzyme concentration (5 g/100 g) using central composite design (CCD). Effectiveness of Zympex-014 towards hydrolysis of P. hermala leaves cell wall was examined by analyzing the control and enzyme-treated leave residues using scanning electron microscope (SEM). GC/MS characterization authenticated the presence of quercetin (1.44), gallic acid (0.23), caffeic acid (0.04), cinnamic acid (0.05), m-coumaric acid (0.23) and p-coumaric acid (0.37 μg/g) as the potent phenolics in Zympex-014 based extract. It can be concluded from the findings of the current work that pre-treatment of P. hermala leaves with Zympex-014 significantly enhanced the recovery of phenolics that supports its potential uses in the nutra-pharamaceutical industry.

scholarly journals Optimizing of Microalgae Scenedesmus sp. Biomass Production in Wet Market Wastewater Using Response Surface Methodology

2021 ◽  
Vol 13 (4) ◽  
pp. 2216
Author(s):  
Najeeha Mohd Apandi ◽  
Mimi Suliza Muhamad ◽  
Radin Maya Saphira Radin Mohamed ◽  
Norshuhaila Mohamed Sunar ◽  
Adel Al-Gheethi ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Biomass Yield ◽  
Biomass Productivity ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Aeration Rate ◽  
Composition Analysis ◽  
Wet Market ◽  
Central Composite

The present study aimed to optimize the production of Scenedesmus sp. biomass during the phycoremediation process. The biomass productivity was optimized using face centred central composite design (FCCCD) in response surface methodology (RSM) as a function of two independent variables that included wet market wastewater concentrations (A) with a range of 10% to 75% and aeration rate (B) with a range of 0.02 to 4.0 L/min. The results revealed that the highest biomass productivity (73 mg/L/d) and maximum growth rate (1.19 day−1) was achieved with the 64.26% of (A) and 3.08 L/min of (B). The GC-MS composition analysis of the biomass yield extract revealed that the major compounds are hexadecane (25%), glaucine (16.2%), and phytol (8.33%). The presence of these compounds suggests that WMW has the potential to be used as a production medium for Scenedesmus sp. Biomass, which has several applications in the pharmaceutical and chemical industry.

scholarly journals Homogenate Extraction of Crocins from Saffron Optimized by Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Yingpeng Tong ◽  
Yu Jiang ◽  
Dan Guo ◽  
Yongqiu Yan ◽  
Shiping Jiang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Process Conditions ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Voltage ◽  
Homogenate Extraction

Saffron, which has many kinds of biological activities, has been widely used in medicine, cosmetics, food, and other fields of health promotion industries. Crocins are the main component of saffron (Crocus sativus L.). At present, most of the extraction methods for crocins require long time or special instruments to complete the process and some of them are not suitable for industrial production at present. In this article, homogenate extraction technology which is a convenient and efficient method was developed for crocins extraction from saffron. Firstly, the influences of extraction voltage, extraction time, ethanol concentration, and temperature on crocins yield were studied by single factor experiments; and then response surface methodology (RSM) was used to optimize levels of four variables based on the result of single factor experiments. Results showed that the optimum extraction process conditions for crocins were as follows: extraction voltage, 110 V; ethanol concentration, 70%; extraction temperature, 57°C; and extraction time, 40 s. Based on these conditions, the extraction yield of crocins can reach 22.76% which is higher than ultrasonic extraction method. Therefore, homogenate extraction is an effective way to extract crocins from saffron with higher extraction yield and shorter extraction time.

scholarly journals Optimization of Supercritical Carbon Dioxide Extraction of Quercus infectoria Oil

2015 ◽  
Vol 74 (7) ◽  
Author(s):  
Liza Md Salleh ◽  
Stashia ELeaness Rosland Abel ◽  
Gholamreza Zahedi ◽  
Russly Abd Rahman ◽  
Hasmida Mohd Nasir ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Goodness Of Fit ◽  
Maximum Yield ◽  
Extraction Yield ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Predicted Values ◽  
Artificial Neural Network Ann ◽  
Quercus Infectoria

This current study focuses on the modelling and optimization of supercritical fluid extraction of Quercus infectoria galls oil. In this case, response surface methodology (RSM) and artificial neural network (ANN) were applied for the modelling and prediction of extraction yield of galls oil. A 17-run Box-Behnken Design (BBD) was employed to statistically optimize the process parameters of SC-CO2 extraction of Quercus infectoria galls at a condition as follows: pressure (5000, 6000, 7000 Psi), temperature (40, 50, 60°C) and extraction time (30, 45, 60 min). The maximum yield of the extracted oil is1.12 % and the optimum conditions are at an extraction pressure of 5574 Psi; extraction temperature of 75°C and extraction time of 54 min. Under the optimal conditions, the experimental results agree with the predicted values obtained through analysis of variance (ANOVA). This indicates a successful response surface methodology and highly satisfactory goodness of fit of the model used. The analysis of experimental design for process optimization results demonstrates that temperature and extraction time are the main parameters that influence the oil extraction of Quercus infectoria.

Sign in / Sign up

Export Citation Format

Share Document