scholarly journals An Integrated Approach to Improve Seismic and Energetic Behaviour of RC Framed Buildings Using Timber Panels

2021 ◽  
Vol 13 (20) ◽  
pp. 11304
Author(s):  
Francesco Smiroldo ◽  
Isabella Paviani ◽  
Ivan Giongo ◽  
Stefano Zanon ◽  
Rossano Albatici ◽  
...  
Keyword(s):  
Seismic Vulnerability ◽  
Thermal Analyses ◽  
Integrated Approach ◽  
Intervention Strategies ◽  
Cross Laminated Timber ◽  
Alternative Intervention ◽  
Integrated Intervention ◽  
Technical Details ◽  
Different Levels

In the present paper, an integrated intervention system applicable to concrete-framed buildings is presented. The purpose of the intervention is to improve both the seismic and the energetic behaviour of such buildings using cross-laminated timber (CLT) panels. Two alternative intervention configurations with different levels of invasiveness are described. Considering a double-wythe masonry-infilled frame, the most invasive configuration consists in the replacement of the external masonry wythe with the CLT panel, while the least invasive configuration consists in the arrangement of the CLT panel from the outside without removing the wythes. The technical details and implementation procedures were studied, considering functionality and disturbance to occupants. An isolated one-storey-one-bay frame was used as a reference for the seismic and thermal analyses. Subsequently, the two intervention configurations were applied to a case-study building by identifying two alternative intervention strategies. The obtained results showed that the proposed integrated intervention approach can significantly reduce both the seismic vulnerability and the energy consumption of concrete buildings.

Commitment To Coax Subtleties From Seismic By Means Of An Intelligent Integrated Approach - A Case Study

2009 ◽  
Author(s):  
Vincent Wai Tin Kong ◽  
Alexis Carrillat ◽  
John Ross Gaither ◽  
Ahmad Bukhari Ibrahim ◽  
Irmawaty Abdullah ◽  
...  
Keyword(s):  
Integrated Approach

scholarly journals Digital Twin for Designing and Reconfiguring Human–Robot Collaborative Assembly Lines

2021 ◽  
Vol 11 (10) ◽  
pp. 4620
Author(s):  
Niki Kousi ◽  
Christos Gkournelos ◽  
Sotiris Aivaliotis ◽  
Konstantinos Lotsaris ◽  
Angelos Christos Bavelos ◽  
...  
Keyword(s):  
Production System ◽  
Assembly Lines ◽  
Flexible Assembly ◽  
Digital Twin ◽  
Collaborative Assembly ◽  
Geometrical Information ◽  
Line Level ◽  
Dual Arm ◽  
Different Levels

This paper discusses a digital twin-based approach for designing and redesigning flexible assembly systems. The digital twin allows modeling the parameters of the production system at different levels including assembly process, production station, and line level. The approach allows dynamically updating the digital twin in runtime, synthesizing data from multiple 2D–3D sensors in order to have up-to-date information about the actual production process. The model integrates both geometrical information and semantics. The model is used in combination with an artificial intelligence logic in order to derive alternative configurations of the production system. The overall approach is discussed with the help of a case study coming from the automotive industry. The case study introduces a production system integrating humans and autonomous mobile dual arm workers.

scholarly journals A New Integrated Approach for Municipal Landfill Siting Based on Urban Physical Growth Prediction: A Case Study Mashhad Metropolis in Iran

2021 ◽  
Vol 13 (5) ◽  
pp. 949
Author(s):  
Salman Qureshi ◽  
Saman Nadizadeh Shorabeh ◽  
Najmeh Neysani Samany ◽  
Foad Minaei ◽  
Mehdi Homaee ◽  
...  
Keyword(s):  
Urban Growth ◽  
Integrated Approach ◽  
Physical Growth ◽  
Support Vector ◽  
Markov Chain Method ◽  
Physical Expansion ◽  
Hierarchy Process ◽  
The City

Due to irregular and uncontrolled expansion of cities in developing countries, currently operational landfill sites cannot be used in the long-term, as people will be living in proximity to these sites and be exposed to unhygienic circumstances. Hence, this study aims at proposing an integrated approach for determining suitable locations for landfills while considering their physical expansion. The proposed approach utilizes the fuzzy analytical hierarchy process (FAHP) to weigh the sets of identified landfill location criteria. Furthermore, the weighted linear combination (WLC) approach was applied for the elicitation of the proper primary locations. Finally, the support vector machine (SVM) and cellular automation-based Markov chain method were used to predict urban growth. To demonstrate the applicability of the developed approach, it was applied to a case study, namely the city of Mashhad in Iran, where suitable sites for landfills were identified considering the urban growth in different geographical directions for this city by 2048. The proposed approach could be of use for policymakers, urban planners, and other decision-makers to minimize uncertainty arising from long-term resource allocation.

scholarly journals Evaluating Life Cycle of Buildings Using an Integrated Approach Based on Quantitative-Qualitative and Simplified Best-Worst Methods (QQM-SBWM)

2021 ◽  
Vol 13 (8) ◽  
pp. 4487
Author(s):  
Maghsoud Amiri ◽  
Mohammad Hashemi-Tabatabaei ◽  
Mohammad Ghahremanloo ◽  
Mehdi Keshavarz-Ghorabaee ◽  
Edmundas Kazimieras Zavadskas ◽  
...  
Keyword(s):  
Life Cycle ◽  
Computer Software ◽  
Integrated Approach ◽  
Comfort Level ◽  
Combination Method ◽  
New Combination ◽  
Numerical Examples ◽  
Environmental Consequences ◽  
Time Required

Evaluating the life cycle of buildings is a valuable tool for assessing sustainability and analyzing environmental consequences throughout the construction operations of buildings. In this study, in order to determine the importance of building life cycle evaluation indicators, a new combination method was used based on a quantitative-qualitative method (QQM) and a simplified best-worst method (SBWM). The SBWM method was used because it simplifies BWM calculations and does not require solving complex mathematical models. Reducing the time required to perform calculations and eliminating the need for complicated computer software are among the advantages of the proposed method. The QQM method has also been used due to its ability to evaluate quantitative and qualitative criteria simultaneously. The feasibility and applicability of the SBWM were examined using three numerical examples and a case study, and the results were evaluated. The results of the case study showed that the criteria of the estimated cost, comfort level, and basic floor area were, in order, the most important criteria among the others. The results of the numerical examples and the case study showed that the proposed method had a lower total deviation (TD) compared to the basic BWM. Sensitivity analysis results also confirmed that the proposed approach has a high degree of robustness for ranking and weighting criteria.

scholarly journals The Importance of Environmental Factors in the Planning of Container Terminals: The Case Study of the Port of Augusta

2021 ◽  
Vol 11 (5) ◽  
pp. 2153
Author(s):  
Nadia Giuffrida ◽  
Maja Stojaković ◽  
Elen Twrdy ◽  
Matteo Ignaccolo
Keyword(s):  
Environmental Impact ◽  
Container Terminal ◽  
Decision Support Tool ◽  
Container Terminals ◽  
Mitigation Measures ◽  
Support Tool ◽  
Clean Environment ◽  
Different Levels

Container terminals are the main hubs of the global supply chain but, conversely, they play an important role in energy consumption, environmental pollution and even climate change due to carbon emissions. Assessing the environmental impact of this type of port terminal and choosing appropriate mitigation measures is essential to pursue the goals related to a clean environment and ensuring a good quality of life of the inhabitants of port cities. In this paper the authors present a Terminal Decision Support Tool (TDST) for the development of a container terminal that considers both operation efficiency and environmental impacts. The TDST provides environmental impact mitigation measures based on different levels of evolution of the port’s container traffic. An application of the TDST is conducted on the Port of Augusta (Italy), a port that is planning infrastructural interventions in coming years in order to gain a new role as a reference point for container traffic in the Mediterranean.

scholarly journals A Unique Transdisciplinary Engineering-Based Integrated Approach for the Design of Temporary Refugee Housing Using Kano, HOQ/QFD, TRIZ, AD, ISM and DSM Tools

Designs ◽  
2021 ◽  
Vol 5 (2) ◽  
pp. 31
Author(s):  
Daniel Moran ◽  
Atila Ertas ◽  
Utku Gulbulak
Keyword(s):  
Rural Areas ◽  
Social Issues ◽  
Integrated Approach ◽  
Interpretive Structural Modeling ◽  
Design Problems ◽  
Design Structure ◽  
Function Design ◽  
Complex Engineering ◽  
Design Conflicts

The continued displacement of refugees from their homes and homelands (now greater than 50 million people worldwide) places increased focus and attention on evolving the designs of temporary housing that is available to be provided to the refugee population, especially in rural areas where housing does not already exist and must be constructed in very little time. Complex engineering problems involving social issues, such as this case study, benefit from the use of Integrated Transdisciplinary (TD) Tools (ITDT) to effectively and efficiently address the design questions related to them. The integrated use of TD Tools such as Kano Analysis, KJ Diagrams, Critical to Quality (CTQ), House of Quality (HOQ)/Quality Function Design (QFD), Theory of Inventive Problem Solving (TRIZ), Axiomatic Design (AD), Interpretive Structural Modeling (ISM), and Design Structure Matrix (DSM) through an end-to-end unique design process leads to innovation and elimination of design conflicts for especially complicated design problems. The objective of this study is to examine the design of temporary refugee housing using integrated TD tools mentioned above. This research concludes that the use of the ITDT approach provides an innovative, decoupled design.

unrechtliche peinliche schmehung oder dem gemeinen nutz nuetzlich?Eine Fallstudie zur Normenkonkurrenz im Schmähschriftprozess des 16. Jahrhunderts

2020 ◽  
Vol 25 (1) ◽  
pp. 135-149
Author(s):  
Jan Siegemund
Keyword(s):  
Early Modern ◽  
Common Good ◽  
Public Places ◽  
Legal Norms ◽  
The Public ◽  
The Common ◽  
The Public Sphere ◽  
The City ◽  
Different Levels

AbstractLibel played an important and extraordinary role in early modern conflict culture. The article discusses their functions and the way they were assessed in court. The case study illustrates argumentative spaces and different levels of normative references in libel trials in 16th century electoral Saxony. In 1569, Andreas Langener – in consequence of a long stagnating private conflict – posted several libels against the nobleman Tham Pflugk in different public places in the city of Dresden. Consequently, he was arrested and charged with ‘libelling’. Depending on the reference to conflicting social and legal norms, he had therefore been either threatened with corporal punishment including his execution, or rewarded with laudations. In this case, the act of libelling could be seen as slander, but also as a service to the community, which Langener had informed about potentially harmful transgression of norms. While the common good was the highest maxim, different and sometimes conflicting legally protected interests had to be discussed. The situational decision depended on whether the articulated charges where true and relevant for the public, on the invective language, and especially on the quality and size of the public sphere reached by the libel.

Sign in / Sign up

Export Citation Format

Share Document