scholarly journals Time Series Effect on Surface Deformation above Goaf Area with Multiple-Seam Mining

Symmetry ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1428
Author(s):  
Zhenyue Shi ◽  
Qingbiao Wang ◽  
Pu Wang ◽  
Donglin He ◽  
Yun Bai ◽  
...  
Keyword(s):  
Coal Mining ◽  
Surface Deformation ◽  
Ground Subsidence ◽  
Lagrangian Analysis ◽  
Large Area ◽  
Coal Seams ◽  
Near Surface ◽  
Geological Conditions ◽  
Mining Sequence ◽  
Seam Mining

The surface subsidence caused by coal mining is a large area, and computer simulation is a fast and intuitive method, which can help us understand the macroscopic subsidence law. The mined-out area left over by coal mining is not disposed of appropriately for a long time. Thus, it can easily cause ground subsidence, collapse, or spot cracking, especially when mining multiple coal seams, which seriously restricts the construction and safety of the near-surface rock and soil layers. Based on the engineering background of five-layer coal mining in the Beibu Coal Mine of Laiwu City, a “Fast Lagrangian Analysis of Continua in 3D” numerical calculation model was established. The model was used to analyze the surface deformation indexes of four groups with different mining sequences in multiple coal seams, revealing the sequence effects of mining time on the surface deformation law in the goaf collapse areas, hence obtaining optimal mining sequences. The results showed that the four groups of mining sequences (including vertical settlement and horizontal deformation) have stable surface deformation centers, but the deformation ranges and amounts are quite different. The settlement deformation is the main difference. Mining sequence I has the largest deformation of 62.7 cm, followed by mining sequence III. Mining sequences II and IV are basically the same, at only 22% of the value of mining sequence 1. A multi-index analysis of the surface deformation curve including the inflection point, stagnation point, and slope showed that the larger the surface deformation, the more evident the change of the curve (concave or convex) and slope, the more uneven the foundation stress, the more severe the damage to the surface structures, and the less suitable the surface construction. Finally, upon analyzing the indicators of surface stability and adaptability, mining sequence IV was indicated as the optimal scheme. It is suggested that an optimal mining sequence should be appropriately selected before the mining of multiple coal seams. The research results can provide effective guidance for addressing surface deformations under similar geological conditions, and can provide scientific evaluations for the safety and stability of surface buildings and structures, leading to considerable economic and social benefits.

scholarly journals Control of the Internal and External Staggered Distance of Coal Mining Face to the Water-Conducting Fissures in the Overlying Strata of the Near Coal

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Zhiyuan Jin ◽  
Tao Peng
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Coal Mine ◽  
Calculation Formula ◽  
Coal Seams ◽  
Coal Face ◽  
Geological Conditions ◽  
Mining Face ◽  
Seam Mining ◽  
Water Proof

In Northwest China, rainfall is low, water resources are scarce, and the ecological environment is fragile. For shallow-buried and close-spaced coal seams with a thickness of upper coal bed >60∼70 m, the water-conducting fissures of the overlying rock will not penetrate the water-isolating layer after the upper coal seam is mined; the internal and external gap angles of the water-conducting fissures are not generated from the water-isolating layer. We set out to explore the critical internal and external dislocations for the second significant development of water-conducting fissures in the overlying rock after coal mining under control. A calculation model for the critical internal and external staggered distances of coal mining face in shallow-buried and close-spaced coal seams is established, the calculation formula is given, and the calculation formula for the critical seam mining ratio under the condition of internal staggered mining mode is given. Numerical simulation performed by UDEC methods: taking the overburden strata in the shallow-buried and close-spaced coal seam mining area of Shigetai Coal Mine as a prototype, it was verified that the critical internal and external offsets of the coal mining face in shallow-buried and close-spaced coal seams have a significant effect on the overlying water flow cracks in the mining of the lower coal seam. For the feasibility of developmental control, according to the engineering geological conditions of Shigetai, through the calculation method of external staggered distance, it is concluded that the distance of the open cut of the lower coal face and the upper coal face is only 21∼27 m, which is much smaller than the water barrier. It does not produce the critical distance of the water-conducting cracks. Therefore, in the process of mining the lower coal seam, the water-proof layer will produce water-conducting cracks, lose its water-proof performance, and cause water loss. This is also the cause of the water inrush accident in Shigetai Coal Mine.

scholarly journals Spatial-Temporal Evolution of Land Subsidence and Rebound over Xi’an in Western China Revealed by SBAS-InSAR Analysis

2020 ◽  
Vol 12 (22) ◽  
pp. 3756
Author(s):  
Wei Shi ◽  
Guan Chen ◽  
Xingmin Meng ◽  
Wanyu Jiang ◽  
Yan Chong ◽  
...  
Keyword(s):  
Land Subsidence ◽  
Groundwater Level ◽  
Surface Deformation ◽  
Western China ◽  
Ground Subsidence ◽  
Underground Space ◽  
Large Area ◽  
Space Utilization ◽  
Rapid Urbanization ◽  
Ground Fissures

Land subsidence is one of the major urban geological hazards, which seriously restricts the development of many cities in the world. As one of the major cities in China, Xi’an has also been experiencing a large area of land subsidence due to excessive exploitation of groundwater. Since the Heihe Water Transfer Project (HWTP) became fully operational in late 2003, the problem of subsidence has been restrained, but other issues, such as ground rebounds, have appeared, and the effect of the underground space utilization on land subsidence remains unsolved. The spatial-temporal pattern of land subsidence and rebound in Xi’an after HWTP and their possible cause have so far not been well understood. In this study, the evolutionary characteristics of land subsidence and rebound in Xi’an city from 2007–2019 was investigated using Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-SAR) technology to process the Advanced Land Observing Satellite (ALOS) and Sentinel-1A SAR datasets, and their cause and the correlation with groundwater level changes and the underground space utilization were discussed. We found that the land subsidence rate in the study area slowed from 2007–2019, and the subsidence area shrank and gradually developed into three relatively independent and isolated subsidence areas primarily. Significant local rebound deformation up to 22 mm/y commenced in the groundwater recharge region during 2015–2019. The magnitude of local rebound was dominated by the rise in groundwater level due to HWTP, whereas tectonic faults and ground fissures control the range of subsidence and the uplift area. The influence of building load on surface deformation became increasingly evident and primarily manifested by slowing the subsidence reduction trend. Additionally, land subsidence caused by the disturbances during the subway construction period was stronger than that in the operational stage. Future land subsidence in Xi’an is predicted to be alleviated overall, and the areas of rebound deformation will continue increasing for a limited time. However, uneven settlement range may extend to the Qujiang and Xixian New District due to the rapid urban construction. Our results could provide a scientific basis for land subsidence hazard mitigation, underground space planning, and groundwater management in Xi’an or similar regions where severe ground subsidence was induced by rapid urbanization.

Distribution of Underground Pressure Law and Fracture Zone Prediction Research of Overburden in Steep and Multiple Coal Seams Mining

2013 ◽  
Vol 448-453 ◽  
pp. 3888-3892
Author(s):  
Ke Min Wei ◽  
Mao Sen Zhao ◽  
Ze Kang Wen ◽  
You Ling Fang
Keyword(s):  
Stress Concentration ◽  
Coal Mining ◽  
Fracture Zone ◽  
Coal Pillar ◽  
Steep Seam ◽  
Coal Seams ◽  
Level 1 ◽  
Mining Work ◽  
Seam Mining ◽  
Protection Pillar

Use Taiping coal mines second horizontal (+1100m~+900 m level ) 1#, 3# and 5# coal seam in Panzhihua Baoding as the research object, apply the problem solving nonlinear large deformation finite difference method (FLAC), to research the steep multi-seam mining of pressure distribution and characteristics of fracture zone. The results show that: (1)During the course of three coal mining extraction, the stress of goaf surrounding rocks will be changed. (2)When the nearby coal is mining, the coal pillar come into being stress concentration near the area. when the mining work continues, the goaf will have an effect on the protection pillar, which is similar to the "liberate". the effect of coal pillar and stress concentration nearby will be eased; (3)After the coal mining, plastic failure has occurred over the protection pillar, forming a water guide channel. Research results can be as a reference for similar steep seam mining.

scholarly journals Additional Stress on a Buried Pipeline under the Influence of Coal Mining Subsidence

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Ping Xu ◽  
Minxia Zhang ◽  
Zhibin Lin ◽  
Zhengzheng Cao ◽  
Xu Chang
Keyword(s):  
Coal Mining ◽  
Surface Deformation ◽  
Analytical Calculation ◽  
Mining Subsidence ◽  
Ground Subsidence ◽  
Additional Stress ◽  
Buried Pipeline ◽  
Buried Pipelines ◽  
Probability Integral Method ◽  
Coal Mining Subsidence

Buried pipelines influenced by coal mining subsidence will deform and generate additional stress during surface deformation. On the basis of the coordinating deformation relationship between buried pipeline and its surrounding soils, a stress analysis method of a buried pipeline induced by mining was proposed. The buried pipeline additional stresses were analyzed; meanwhile, a corresponding analysis process of the pipeline stresses was also presented during mining subsidence. Furthermore, based on the ground subsidence along the pipeline predicted in advance by the probability integral method, the additional stresses and Von Mises equivalent stresses and their distributions along the buried pipeline induced by the exploitation of a coal mining working face named 14101 were obtained. Meanwhile, a comparative analysis of additional stresses between simulation and analytical calculation was performed for the deep analysis and reliability of the results presented by the proposed methodology in this paper. The proposed method provides references for analysis of the additional stress and safety of buried pipelines under the influence of mining subsidence.

scholarly journals Height of the Fractured Zone in Coal Mining under Extra-Thick Coal Seam Geological Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Dequan Sun ◽  
Xiaoyan Li ◽  
Zhijie Zhu ◽  
Yang Li ◽  
Fang Cui
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Process Analysis ◽  
Failure Process ◽  
Analysis Method ◽  
Coal Seams ◽  
Fractured Zone ◽  
Seam Mining ◽  
Borehole Televiewer ◽  
Overlying Strata

The height of the fractured zone caused by coal mining is extremely significant for safely mining under water, water conservation, and gas treatment. At present, the common prediction methods of overburden fractured zone height are only applicable to thin and medium-thick coal seams, not suitable for thick and extra-thick coal seams. In order to determine the overburden fractured zone distribution characteristics of extra-thick seam mining, failure process analysis method of overlying strata was proposed based on key strata theory. This method was applied to 15 m coal seam of Tongxin coal mine, and fractured zone height was determined to be 174 m for 8100 panel. EH4 electromagnetic image system and borehole televiewer survey were also conducted to verify the theory results. The distribution of the electrical conductivity showed that the failure height was 150–170 m. Observation through the borehole televiewer showed that the fractured zone height was 171 m. The results of the two field test methods showed that the fractured zone height was 150–171 m, and it was consistent with the theory calculation results. Therefore, this failure process analysis method of overlying strata can be safely used for other coal mines.

scholarly journals Influence of Valleys Terrain on Pressure of Fully Mechanized Working Faces in Shallow Coal Seams

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
YingJie Liu ◽  
Qingjie Qi ◽  
Anhu Wang
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Rock Fracture ◽  
Mine Pressure ◽  
Overburden Rock ◽  
Coal Seams ◽  
Valley Bottom ◽  
Key Stratum ◽  
Seam Mining ◽  
The Impact

The absence of a key stratum during overburden rock movement is crucial to the mining pressure of fully mechanized coal mining faces. Using physical and numerical simulations, the 21304 mechanized mining in Daliuta and Huojitu coal mining faces 1−2 appeared twice during a pressure frame accident analysis. The results indicate that a lack of key overlying strata is crucial to the mining of lower coal seams, particularly for the upper sections of a single key stratum of coal. When the key stratum of the upper coal seam is absent, a stable masonry structure is formed after mining. It is easy to form stable stacked strata at the bottom of a coal seam. When developing gullies in deep terrains, the formation of the key stratum will be an upper rock fracture affected by the impact, resulting in a partial absence of the key stratum. When the key stratum is absent, the mining of upslope working faces and the probability of dynamic strata pressure increase with the overburden on the working face and mining of downslope faces. The face mine pressure development laws on the upper and lower coal seam mining were similar, mainly manifesting as “slope section >valley bottom section >back slope section.”

scholarly journals Research on Surface Subsidence of Long-Span Underground Tunnel

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Jun Yan ◽  
Xueying Liu ◽  
Xiaoyu Bai ◽  
Mingyi Zhang ◽  
Yujin Jiao ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Vertical Surface ◽  
Surface Settlement ◽  
Horizontal Surface ◽  
Urban Rail Transit ◽  
Ground Subsidence ◽  
Underground Excavation ◽  
Management Level ◽  
Long Span ◽  
Geological Conditions

In the process of urban rail transit construction, underground excavation method is often used in subway station construction. Based on a large number of measured data of Qingdao Metro Line 3, this paper analyzes and studies the ground subsidence law of long-span shallow buried excavation station. The research results show that vertical surface settlement will be caused by the excavation of both sides of the guide hole, but the settlement is relatively small, basically within −10 mm. Large surface settlement will occur during the middle or middle guide hole excavation, with a large settlement up to −30 mm. Through data fitting, it is found that the regression analysis using cubic polynomial of one degree can get better fitting effect. The horizontal surface variation rules of underground excavation stations are affected by the tunnel depth, geological conditions, management level of monitoring units, monitoring layout and monitoring accuracy, and so on. The differences in horizontal surface deformation and settlement between stations are large. Wannianquan Road Station basically conforms to the deformation law of ground settlement trough in Peck, and Junfeng Road Station directly above belongs to the whole subsidence type. This study has accumulated a large number of surface settlement monitoring data, which can provide a certain reference for the subsequent design of similar lines.

Recent Patents on Thin Coal Seam Mining Equipment

2020 ◽  
Vol 13 (2) ◽  
pp. 99-108
Author(s):  
Yanxiang Wang ◽  
Daolong Yang ◽  
Bangsheng Xing ◽  
Tingting Zhao ◽  
Zhiyi Sun ◽  
...  
Keyword(s):  
Coal Seam ◽  
Underground Space ◽  
Mining Method ◽  
Mining Equipment ◽  
Coal Seams ◽  
Thin Coal Seam ◽  
Recoverable Reserves ◽  
Working Face ◽  
Geological Conditions ◽  
Seam Mining

Background:: China's thin and extremely thin coal seam resources are widely distributed and rich in reserves. These coal seams account for 20% of the recoverable reserves, with 9.83 billion tons of industrial reserves and 6.15 billion tons of recoverable reserves. Objective: Due to the complex geological conditions of the thin coal seam, the plow mining method cannot be effectively popularized, and the drum mining method is difficult to be popularized and applied in small and medium-sized coal mines, so it is necessary to find other more advantageous alternative mining methods. Methods: The equipment integrates mining operations, conveying operations, and supporting operations, and is suitable for mining short and extremely thin coal seam with a height of 0.35m-0.8m and width of 2m-20m. It has the advantages of the low body of the shearer, no additional support on the working face, and small underground space. The mining efficiency of thin coal seam and very thin coal seam can be improved and the mining cost can be reduced. Results: Thin coal seam shear mining combines mining, conveying, and supporting processes together and has the advantages of a low fuselage, no extra support required for the working face, and feasibility in a small underground space. Conclusion: The summarized mining method can improve the mining efficiency of thin and extremely thin coal seams, reduce mining costs, and incorporate green mining practices, which take both mining economy and safety into account.

Research on the Overlying Strata in Full-Mechanized Coal Mining of Datong Jurassic Coal Multi-Layer Goaf

2012 ◽  
Vol 616-618 ◽  
pp. 402-405 ◽  
Author(s):  
Hong Chun Xia ◽  
Guo Sheng Gao ◽  
Bin Yu
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Coal Pillar ◽  
Mining Area ◽  
Mechanics Model ◽  
Roof Structure ◽  
Geological Conditions ◽  
Seam Mining ◽  
The Impact ◽  
Overlying Strata

According to the specific geological conditions in themulti-layer worked-out areas of Yongding coal seam, by the methods of integration of theoretic analysis, numerical value calculation and so on, we studied movement law of Overlaying Strata and influence of coal pillar in Coal seam mining, obtained the basic law of the overlying strata movement in multiplayer, provides a theoretical basis for the safe and efficient exploitation of the success of multiplayer. Many mining area in China is mining of closed distance coal seam group, By the impact of coal seam in the overlying, face and the tunnel roof structure will be different injury in sub-coal seam mining, Roof structure has changed greatly, even damage and easily take the roof leakage, When the the goaf communication with the overlying coal seams, caused by the induced secondary disasters such as face air leakage, Therefore, exploitation of the law of motion of the overlying strata in the multiplayer is a pressing problem. Exploitation multiplayer seam few theoretical and technical foundation at home and abroad, affecting the validity of the mining, rationality. although a lot of research on theory and technology of coal mining over the years[1~5], But it was not able to an overall comprehensive analysis of upper goaf adjacent goaf and overlying the coal pillar and present mining face, create a dynamic structural mechanics model, which is likely to cause the occurrence of disasters.

scholarly journals The evolution of thick coal seams mining methods in China

2020 ◽  
Vol 192 ◽  
pp. 01023
Author(s):  
Qiao Jianyong ◽  
Wang Zhiqiang ◽  
Zhao Jingli
Keyword(s):  
Coal Mining ◽  
Spontaneous Combustion ◽  
Underground Coal Mining ◽  
Coal Seams ◽  
Recovery Coefficient ◽  
Increased Risk ◽  
Geological Conditions ◽  
Mechanized Method ◽  
Full Capacity ◽  
The Moment

The article is shown that the main methods used in China for coal mining from thick seams at the moment are two methods the Complex mechanized method of developing seams at their full capacity (used only in simple geological conditions and is an additional method for the following) and Complex mechanized mining method with coal production (which is used mainly, including in difficult conditions). Despite the fact that these methods have positively proven themselves over the years, their use has a number of significant drawbacks, including a low extraction rate, an increased risk of endogenous combustion and rock burst, and others. Currently, a promising way is a development method with a diagonal (cross-shaped) arrangement of drifts, which helps to eliminate many of the shortcomings of previous methods, including a low recovery coefficient, the risk of spontaneous combustion, the need to support the drift and others. It is expected that this method will be widely used for underground coal mining in deep mines in China with difficult mining and geological conditions.

Sign in / Sign up

Export Citation Format

Share Document