scholarly journals Development of Climate Data Bias Corrector (CDBC) Tool and Its Application over the Agro-Ecological Zones of India

Water ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 1102 ◽  
Author(s):  
Rishabh Gupta ◽  
Rabin Bhattarai ◽  
Ashok Mishra
Keyword(s):  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Computational Cost ◽  
Regional Climate Models ◽  
Climate Data ◽  
Ecological Zones ◽  
Station Grid ◽  
File Formats ◽  
Agro Ecological Zones

The use of global and regional climate models has been increasing in the past few decades, in order to analyze the future of natural resources and the socio-economic aspects of climate change. However, these climate model outputs can be quite biased, which makes it challenging to use them directly for analysis purpose. Therefore, a tool named Climate Data Bias Corrector was developed to correct the bias in climatic projections of historical and future periods for three primary climatic variables—rainfall, temperature (maximum and minimum), and solar radiation. It uses the quantile mapping approach, known for its efficiency and low computational cost for bias correction. Its Graphical User Interface (GUI) was made to be feasible to take input and give output in commonly used file formats—comma and tab delimited file formats. It also generates month-wise cumulative density function (CDF) plot of a random station/grid to allow the user to investigate the effectiveness of correction statistically. The tool was verified with a case study on several agro-ecological zones of India and found to be efficient.

Future humidity extremes in an urban-rural context - using regional climate model projections down to convection permitting scales for Berlin

2021 ◽  
Author(s):  
Gaby S. Langendijk ◽  
Diana Rechid ◽  
Daniela Jacob
Keyword(s):  
Climate Change ◽  
Urban Areas ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Climate Change Impacts ◽  
Regional Climate Models ◽  
Climate Projections ◽  
Climate Data ◽  
Urban Rural

<p>Urban areas are prone to climate change impacts. A transition towards sustainable and climate-resilient urban areas is relying heavily on useful, evidence-based climate information on urban scales. However, current climate data and information produced by urban or climate models are either not scale compliant for cities, or do not cover essential parameters and/or urban-rural interactions under climate change conditions. Furthermore, although e.g. the urban heat island may be better understood, other phenomena, such as moisture change, are little researched. Our research shows the potential of regional climate models, within the EURO-CORDEX framework, to provide climate projections and information on urban scales for 11km and 3km grid size. The city of Berlin is taken as a case-study. The results on the 11km spatial scale show that the regional climate models simulate a distinct difference between Berlin and its surroundings for temperature and humidity related variables. There is an increase in urban dry island conditions in Berlin towards the end of the 21st century. To gain a more detailed understanding of climate change impacts, extreme weather conditions were investigated under a 2°C global warming and further downscaled to the 3km scale. This enables the exploration of differences of the meteorological processes between the 11km and 3km scales, and the implications for urban areas and its surroundings. The overall study shows the potential of regional climate models to provide climate change information on urban scales.</p>

Supporting users to implement uncertainty of climate change information in adaptation studies

2020 ◽  
Author(s):  
Gabriella Zsebeházi ◽  
Beatrix Bán
Keyword(s):  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Climate Projections ◽  
Web Portals ◽  
Climate Data ◽  
Adaptation Studies ◽  
Climate Services ◽  
Model Simulations

<p>There is a growing need to develop climate services both at national and international level, to bridge the gap between the providers and the end-users of climate information. Several national climate services are aiming to serve the local users’ needs by creating web portals. Thanks to this trend, the number of available climate data (both measured and modelled) is rapidly growing and often there is not any personal contact between the users and the climate scientists via the web portals. Therefore, it is important to make this service usable and informative and train the potential users about the nature, strengths and limits of climate data.</p><p>Within the framework of a national funded project (KlimAdat), the regional climate model projections of the Hungarian Meteorological Service are extended and a representative climate database is developed. Regular workshops are organised, where we get hands-on information about the requirements and give training about climate modelling in exchange. One of the most discussed issue during the workshops is tackling with uncertainty information of climate projections in climate change adaptation studies. The future changes are quantified in probabilistic form, applying ensemble technique, i.e. several climate model simulations prepared with different global and regional climate models and anthropogenic scenarios are evaluated simultaneously.</p><p>In order to help the users orienting through the mushrooming climate projections, a user guide is prepared. Topics are e.g. how to select model simulations, how to take into account model validation results and what is the difference between signal and noise. The guideline is based on 24 simulations of the 12-km resolution Euro-CORDEX regional climate models, driven by the RCP4.5 and RCP8.5 scenarios. Two target groups are distinguished based on the required level of post-processing climate data: 1) climate impact modellers, who need large amount of raw or bias corrected data to drive their own impact model; 2) decision makers and planners, who need heavily processed but lightweight data. The purpose of our guideline is to provide insight into the customized methodologies used at the Hungarian Meteorological Service for fulfilling users’ needs.</p>

scholarly journals Projecting Health Impacts of Future Temperature: A Comparison of Quantile-Mapping Bias-Correction Methods

2021 ◽  
Vol 18 (4) ◽  
pp. 1992
Author(s):  
Weijia Qian ◽  
Howard H. Chang
Keyword(s):  
Bias Correction ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Warm Season ◽  
Climate Science ◽  
Regional Climate Models ◽  
Health Impact ◽  
Quantile Mapping ◽  
Ed Visits

Health impact assessments of future environmental exposures are routinely conducted to quantify population burdens associated with the changing climate. It is well-recognized that simulations from climate models need to be bias-corrected against observations to estimate future exposures. Quantile mapping (QM) is a technique that has gained popularity in climate science because of its focus on bias-correcting the entire exposure distribution. Even though improved bias-correction at the extreme tails of exposure may be particularly important for estimating health burdens, the application of QM in health impact projection has been limited. In this paper we describe and apply five QM methods to estimate excess emergency department (ED) visits due to projected changes in warm-season minimum temperature in Atlanta, USA. We utilized temperature projections from an ensemble of regional climate models in the North American-Coordinated Regional Climate Downscaling Experiment (NA-CORDEX). Across QM methods, we estimated consistent increase in ED visits across climate model ensemble under RCP 8.5 during the period 2050 to 2099. We found that QM methods can significantly reduce between-model variation in health impact projections (50–70% decreases in between-model standard deviation). Particularly, the quantile delta mapping approach had the largest reduction and is recommended also because of its ability to preserve model-projected absolute temporal changes in quantiles.

Regional Climate Model Inter-Comparison for Antarctica within a Data Science Framework

2021 ◽  
Author(s):  
Jeremy Carter ◽  
Amber Leeson ◽  
Andrew Orr ◽  
Christoph Kittel ◽  
Melchior van Wessem
Keyword(s):  
Regional Climate Model ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Future Climate Change ◽  
Near Surface ◽  
Virtual Lab ◽  
Model Variability ◽  
The Antarctic

<p>Understanding the surface climatology of the Antarctic ice sheet is essential if we are to adequately predict its response to future climate change. This includes both primary impacts such as increased ice melting and secondary impacts such as ice shelf collapse events. Given its size, and inhospitable environment, weather stations on Antarctica are sparse. Thus, we rely on regional climate models to 1) develop our understanding of how the climate of Antarctica varies in both time and space and 2) provide data to use as context for remote sensing studies and forcing for dynamical process models. Given that there are a number of different regional climate models available that explicitly simulate Antarctic climate, understanding inter- and intra model variability is important.</p><p>Here, inter- and intra-model variability in Antarctic-wide regional climate model output is assessed for: snowfall; rainfall; snowmelt and near-surface air temperature within a cloud-based virtual lab framework. State-of-the-art regional climate model runs from the Antarctic-CORDEX project using the RACMO, MAR and MetUM models are used, together with the ERA5 and ERA-Interim reanalyses products. Multiple simulations using the same model and domain boundary but run at either different spatial resolutions or with different driving data are used. Traditional analysis techniques are exploited and the question of potential added value from more modern and involved methods such as the use of Gaussian Processes is investigated. The advantages of using a virtual lab in a cloud based environment for increasing transparency and reproducibility, are demonstrated, with a view to ultimately make the code and methods used widely available for other research groups.</p>

scholarly journals Global Radiative Flux and Cloudiness Variability for the Period 1959–2010 in Belgium: A Comparison between Reanalyses and the Regional Climate Model MAR

Atmosphere ◽  
2018 ◽  
Vol 9 (7) ◽  
pp. 262 ◽  
Author(s):  
Coraline Wyard ◽  
Sébastien Doutreloup ◽  
Alexandre Belleflamme ◽  
Martin Wild ◽  
Xavier Fettweis
Keyword(s):  
Cloud Cover ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Horizontal Resolution ◽  
Radiative Flux ◽  
Added Value ◽  
Historical Trends ◽  
The Mean

The use of regional climate models (RCMs) can partly reduce the biases in global radiative flux (Eg↓) that are found in reanalysis products and global models, as they allow for a finer spatial resolution and a finer parametrisation of surface and atmospheric processes. In this study, we assess the ability of the MAR («Modèle Atmosphérique Régional») RCM to reproduce observed changes in Eg↓, and we investigate the added value of MAR with respect to reanalyses. Simulations were performed at a horizontal resolution of 5 km for the period 1959–2010 by forcing MAR with different reanalysis products: ERA40/ERA-interim, NCEP/NCAR-v1, ERA-20C, and 20CRV2C. Measurements of Eg↓ from the Global Energy Balance Archive (GEBA) and from the Royal Meteorological Institute of Belgium (RMIB), as well as cloud cover observations from Belgocontrol and RMIB, were used for the evaluation of the MAR model and the forcing reanalyses. Results show that MAR enables largely reducing the mean biases that are present in the reanalyses. The trend analysis shows that only MAR forced by ERA40/ERA-interim shows historical trends, which is probably because the ERA40/ERA-interim has a better horizontal resolution and assimilates more observations than the other reanalyses that are used in this study. The results suggest that the solar brightening observed since the 1980s in Belgium has mainly been due to decreasing cloud cover.

scholarly journals Regional Climate Model Emulator based on Deep Learning: Concept and First Evaluation of a Novel Hybrid Downscaling Approach

2021 ◽  
Author(s):  
Antoine Doury ◽  
Samuel Somot ◽  
Sébastien Gadat ◽  
Aurélien Ribes ◽  
Lola Corre
Keyword(s):  
Climate Change ◽  
Network Architecture ◽  
Large Scale ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Future Climate ◽  
Near Surface ◽  
The Way

Abstract Providing reliable information on climate change at local scale remains a challenge of first importance for impact studies and policymakers. Here, we propose a novel hybrid downscaling method combining the strengths of both empirical statistical downscaling methods and Regional Climate Models (RCMs). The aim of this tool is to enlarge the size of high-resolution RCM simulation ensembles at low cost.We build a statistical RCM-emulator by estimating the downscaling function included in the RCM. This framework allows us to learn the relationship between large-scale predictors and a local surface variable of interest over the RCM domain in present and future climate. Furthermore, the emulator relies on a neural network architecture, which grants computational efficiency. The RCM-emulator developed in this study is trained to produce daily maps of the near-surface temperature at the RCM resolution (12km). The emulator demonstrates an excellent ability to reproduce the complex spatial structure and daily variability simulated by the RCM and in particular the way the RCM refines locally the low-resolution climate patterns. Training in future climate appears to be a key feature of our emulator. Moreover, there is a huge computational benefit in running the emulator rather than the RCM, since training the emulator takes about 2 hours on GPU, and the prediction is nearly instantaneous. However, further work is needed to improve the way the RCM-emulator reproduces some of the temperature extremes, the intensity of climate change, and to extend the proposed methodology to different regions, GCMs, RCMs, and variables of interest.

A statistical framework for evaluating EURO-CORDEX simulations and derived drought characteristics

2021 ◽  
Author(s):  
David J. Peres ◽  
Alfonso Senatore ◽  
Paola Nanni ◽  
Antonino Cancelliere ◽  
Giuseppe Mendicino ◽  
...  
Keyword(s):  
Climate Change ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Circulation Model ◽  
Regional Climate Models ◽  
Monitoring Networks ◽  
Global Circulation Model ◽  
Drought Characteristics ◽  
Precipitation And Temperature

<p>Regional climate models (RCMs) are commonly used for assessing, at proper spatial resolutions, future impacts of climate change on hydrological events. In this study, we propose a statistical methodological framework to assess the quality of the EURO-CORDEX RCMs concerning their ability to simulate historic observed climate (temperature and precipitation). We specifically focus on the models’ performance in reproducing drought characteristics (duration, accumulated deficit, intensity, and return period) determined by the theory of runs at seasonal and annual timescales, by comparison with high-density and high-quality ground-based observational datasets. In particular, the proposed methodology is applied to the Sicily and Calabria regions (Southern Italy), where long historical precipitation and temperature series were recorded by the ground-based monitoring networks operated by the former Regional Hydrographic Offices. The density of the measurements is considerably greater than observational gridded datasets available at the European level, such as E-OBS or CRU-TS. Results show that among the models based on the combination of the HadGEM2 global circulation model (GCM) with the CLM-Community RCMs are the most skillful in reproducing precipitation and temperature variability as well as drought characteristics. Nevertheless, the ranking of the models may slightly change depending on the specific variable analysed, as well as the temporal and spatial scale of interest. From this point of view, the proposed methodology highlights the skills and weaknesses of the different configurations, aiding on the selection of the most suitable climate model for assessing climate change impacts on drought processes and the underlying variables.</p>

The Mesoscale Response to Global Warming over the Pacific Northwest Evaluated Using a Regional Climate Model Ensemble

2021 ◽  
pp. 1-56
Keyword(s):  
Global Warming ◽  
Pacific Northwest ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Wrf Model ◽  
Regional Climate Models ◽  
Winter Precipitation ◽  
Historical Period ◽  
Continental Interior

This paper describes the downscaling of an ensemble of twelve GCMs using the WRF model at 12-km grid spacing over the period 1970-2099, examining the mesoscale impacts of global warming as well as the uncertainties in its mesoscale expression. The RCP 8.5 emissions scenario was used to drive both global and regional climate models. The regional climate modeling system reduced bias and improved realism for a historical period, in contrast to substantial errors for the GCM simulations driven by lack of resolution. The regional climate ensemble indicated several mesoscale responses to global warming that were not apparent in the global model simulations, such as enhanced continental interior warming during both winter and summer as well as increasing winter precipitation trends over the windward slopes of regional terrain, with declining trends to the lee of major barriers. During summer there is general drying, except to the east of the Cascades. April 1 snowpack declines are large over the lower to middle slopes of regional terrain, with small snowpack increases over the lower elevations of the interior. Snow-albedo feedbacks are very different between GCM and RCM projections, with the GCM’s producing large, unphysical areas of snowpack loss and enhanced warming. Daily average winds change little under global warming, but maximum easterly winds decline modestly, driven by a preferential sea level pressure decline over the continental interior. Although temperatures warm continuously over the domain after approximately 2010, with slight acceleration over time, occurrences of temperature extremes increase rapidly during the second half of the 21st century.

scholarly journals Regional Climate Model Evaluation System powered by Apache Open Climate Workbench v1.3.0: an enabling tool for facilitating regional climate studies

2018 ◽  
Author(s):  
Huikyo Lee ◽  
Alexander Goodman ◽  
Lewis McGibbney ◽  
Duane Waliser ◽  
Jinwon Kim ◽  
...  
Keyword(s):  
Regional Climate Model ◽  
Model Evaluation ◽  
Evaluation System ◽  
Climate Models ◽  
Performance Metrics ◽  
Climate Model ◽  
Regional Climate ◽  
The United States ◽  
Climate Data ◽  
Climate Model Evaluation

Abstract. The Regional Climate Model Evaluation System (RCMES) is an enabling tool of the National Aeronautics and Space Administration to support the United States National Climate Assessment. As a comprehensive system for evaluating climate models on regional and continental scales using observational datasets from a variety of sources, RCMES is designed to yield information on the performance of climate models and guide their improvement. Here we present a user-oriented document describing the latest version of RCMES, its development process and future plans for improvements. The main objective of RCMES is to facilitate the climate model evaluation process at regional scales. RCMES provides a framework for performing systematic evaluations of climate simulations, such as those from the Coordinated Regional Climate Downscaling Experiment (CORDEX), using in-situ observations as well as satellite and reanalysis data products. The main components of RCMES are: 1) a database of observations widely used for climate model evaluation, 2) various data loaders to import climate models and observations in different formats, 3) a versatile processor to subset and regrid the loaded datasets, 4) performance metrics designed to assess and quantify model skill, 5) plotting routines to visualize the performance metrics, 6) a toolkit for statistically downscaling climate model simulations, and 7) two installation packages to maximize convenience of users without Python skills. RCMES website is maintained up to date with brief explanation of these components. Although there are other open-source software (OSS) toolkits that facilitate analysis and evaluation of climate models, there is a need for climate scientists to participate in the development and customization of OSS to study regional climate change. To establish infrastructure and to ensure software sustainability, development of RCMES is an open, publicly accessible process enabled by leveraging the Apache Software Foundation's OSS library, Apache Open Climate Workbench (OCW). The OCW software that powers RCMES includes a Python OSS library for common climate model evaluation tasks as well as a set of user-friendly interfaces for quickly configuring a model evaluation task. OCW also allows users to build their own climate data analysis tools, such as the statistical downscaling toolkit provided as a part of RCMES.

scholarly journals The Impact of Climate Change on Material Degradation Criteria in Heritage over Iran: Regional Climate Model Evaluation

2020 ◽  
Vol 172 ◽  
pp. 02006
Author(s):  
Hamed Hedayatnia ◽  
Marijke Steeman ◽  
Nathan Van Den Bossche
Keyword(s):  
Climate Change ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Salt Crystallization ◽  
Climate Modelling ◽  
Impact Of Climate Change ◽  
Climate Change Effects ◽  
The Impact

Understanding how climate change accelerates or slows down the process of material deterioration is the first step towards assessing adaptive approaches for the preservation of historical heritage. Analysis of the climate change effects on the degradation risk assessment parameters like salt crystallization cycles is of crucial importance when considering mitigating actions. Due to the vulnerability of cultural heritage in Iran to climate change, the impact of this phenomenon on basic parameters plus variables more critical to building damage like salt crystallization index needs to be analyzed. Regional climate modelling projections can be used to asses the impact of climate change effects on heritage. The output of two different regional climate models, the ALARO-0 model (Ghent University-RMI, Belgium) and the REMO model (HZG-GERICS, Germany), is analyzed to find out which model is more adapted to the region. So the focus of this research is mainly on the evaluation to determine the reliability of both models over the region. For model validation, a comparison between model data and observations was performed in 4 different climate zones for 30 years to find out how reliable these models are in the field of building pathology.

Sign in / Sign up

Export Citation Format

Share Document