Dental restorations. Phosphate-bonded refractory die materials

2015 ◽  
Keyword(s):  
Dental Restorations ◽  
Die Materials

Zirconia ceramic dental restorations: Laser machining and optical testing

2009 ◽  
Author(s):  
Duncan P. Hand ◽  
Jonathan P. Parry ◽  
Mateusz Matysiak ◽  
Fraser C. Dear ◽  
J Graham Crowder ◽  
...  
Keyword(s):  
Zirconia Ceramic ◽  
Laser Machining ◽  
Optical Testing ◽  
Dental Restorations

Study of Electrochemical Behavior of Some Dental Alloys

2018 ◽  
Vol 69 (6) ◽  
pp. 1598-1602
Author(s):  
Alice Arina Ciocan Pendefunda ◽  
Constanta Mocanu ◽  
Doriana Agop Forna ◽  
Cristina Iordache ◽  
Elena Luca ◽  
...  
Keyword(s):  
Oral Cavity ◽  
Electrochemical Behavior ◽  
Base Alloy ◽  
Artificial Saliva ◽  
Surface Condition ◽  
Continuous Process ◽  
Metal Alloys ◽  
Alloy Surface ◽  
Dental Alloys ◽  
Dental Restorations

The purpose of the study is to investigate the electrochemical behavior of two dental alloys: palladium alloy (Palidor) and Ni-Cr alloy (Verasoft) in three types of artificial saliva. Determination of corrosion potential and recording of linear and cyclic polarization curves were performed with PGP201 potentiostat (VoltaLab 21- Radelkis Copenhagen. In order to study the modifications produced on the surface of the electrodes, a complex optical microscope MC 1 research type (IOR, Romania) was used, adapted to a digital camera, which was connected to a computer for the digital acquisition of images . Two metal alloys based on Ag-Pd and Ni-Cr were used for the experiments. The materials used came from different types of dental restorations removed from the oral cavity of the patients after a 5-15 years period. As corrosion environments, three artificial saliva were used: Fusayama, Afnor and Rondelli. The Pd-Ag dental alloy exhibits a very good corrosion resistance and the treatment in the Afnor saliva does not affect the surface of the alloy. Electrochemical behavior in Fusayama-Meyer�s saliva of the alloy surface results in a series of spots representing deposits of insoluble salts resulting from the oxidation process, while in the Rondelli saliva there is a series of small corrosion points on the alloy surface. The behavior of the Verasoft alloy in the Afnor and Rondelli saliva is similar; In both solutions, the potential breakthroughs are very close, but in Fusayama-Meyer�s saliva, the potential for initiation of corrosion points is very low (206 mV), a potential that can be encountered in the oral cavity. All metals and metal alloys, even the noble and semi-precious ones, are susceptible to corrosion, forming compounds with properties different from those of the metal or base alloy, which change their surface condition. Metallic dental restorations are permanently affected by the factors of the oral environment (physical-mechanical, chemical and biological), being subjected to a continuous process of degradation.

Additively Manufactured Ingot For Interim Dental Restorations Fabrication Using A Chairside Milling Machine

2021 ◽  
Author(s):  
Marcelo Gabriel Pérez‐Giugovaz ◽  
Delaram Mostafavi ◽  
Marta Revilla‐León
Keyword(s):  
Milling Machine ◽  
Dental Restorations

scholarly journals The Surface Condition of Ni-Cr after SiC Abrasive Blasting for Applications in Ceramic Restorations

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5824
Author(s):  
Weronika Czepułkowska-Pawlak ◽  
Emilia Wołowiec-Korecka ◽  
Leszek Klimek
Keyword(s):  
Surface Condition ◽  
Abrasive Particle ◽  
Surface Profile ◽  
Abrasive Particles ◽  
Dental Restorations ◽  
Large Width ◽  
Ceramic Restorations ◽  
The Impact ◽  
Abrasive Size ◽  
Abrasive Blasting

Abrasive blasting is a process widely used in dentistry. One of the uses is the development of metal surfaces for connections with ceramics in fixed prosthetic restorations. The purpose of this paper was to check how the rough surface profile (width, height, and depth on unevenness) impacts the surface’s condition, like its wettability and percentage of stuck abrasives. The Ni-Cr alloy surface was abrasive blasted by silicon carbide with the various pressure parameters (0.2, 0.4, and 0.6 MPa) and abrasive particle sizes (50, 110, and 250 µm). Cleaned surfaces were examined for roughness, wettability, and percentage of stuck abrasive particles on the surface. The surface after abrasive blasting using 110 µm of abrasive size and 0.4 MPa pressure has the best wettability results. The width of unevenness may cause it. When the unevenness has too small or too large width and depth, the fluids may not cover the entire cavities because of locking the air. The surface condition of dental alloys directly affects metal–ceramic connection strength. The knowledge about the impact of the abrasive blasting parameters on the bond strength will allow one to create durable dental restorations.

High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements

2006 ◽  
Vol 510-511 ◽  
pp. 358-361
Author(s):  
Won Yong Kim ◽  
Han Sol Kim ◽  
In Dong Yeo ◽  
Mok Soon Kim
Keyword(s):  
High Temperature ◽  
Volume Fraction ◽  
Lattice Parameter ◽  
Alloying Elements ◽  
Solid Solution Hardening ◽  
High Temperature Strength ◽  
High Temperature Mechanical Properties ◽  
Die Materials ◽  
The Matrix ◽  
Effective Role

We report on advanced Ni3Al based high temperature structural alloys with refractory alloying elements such as Zr and Mo to be apllied in the fields of die-casting and high temperature press forming as die materials. The duplex microstructure consisting of L12 structured Ni3Al phase and Ni5Zr intermetallic dispersoids was observed to display the microstructural feature for the present alloys investigated. Depending on alloying elements, the volume fraction of 2nd phase was measured to be different, indicating a difference in solid solubility of alloying elements in the matrix γ’ phase. Lattice parameter of matrix phase increased with increasing content of alloying elements. In the higher temperature region more than 973K, the present alloys appeared to show their higher strength compared to those obtained in conventional superalloys. On the basis of experimental results obtained, it is suggested that refractory alloying elements have an effective role to improve the high temperature strength in terms of enhanced thermal stability and solid solution hardening.

scholarly journals On the Use of Conformal Cooling in High-Pressure Die-Casting and Semisolid Casting

Technologies ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 39
Author(s):  
Anders E. W. Jarfors ◽  
Ruslan Sevastopol ◽  
Karamchedu Seshendra ◽  
Qing Zhang ◽  
Jacob Steggo ◽  
...  
Keyword(s):  
High Pressure ◽  
Die Casting ◽  
Life Extension ◽  
Conformal Cooling ◽  
High Pressure Die Casting ◽  
Cooling Channels ◽  
Die Life ◽  
Die Materials ◽  
Pressure Die Casting ◽  
Semisolid Casting

Today, tool life in high pressure die casting (HPDC) is of growing interest. A common agreement is that die life is primarily decided by the thermal load and temperature gradients in the die materials. Conformal cooling with the growth of additive manufacturing has raised interest as a means of extending die life. In the current paper, conformal cooling channels’ performance and effect on the thermal cycle in high-pressure die casting and rheocasting are investigated for conventional HPDC and semisolid processing. It was found that conformal cooling aids die temperature reduction, and the use of die spray may be reduced and support the die-life extension. For the die filling, the increased temperature was possibly counterproductive. Instead, it was found that the main focus for conformal cooling should be focused to manage temperature around the in-let bushing and possibly the runner system. Due to the possible higher inlet pressures for semisolid casting, particular benefits could be seen.

scholarly journals Hydrothermal Ageing and Its Effect on Fracture Load of Zirconia Dental Implants

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3103
Author(s):  
Laurent Gremillard ◽  
Agnès Mattlet ◽  
Alexandre Mathevon ◽  
Damien Fabrègue ◽  
Bruno Zberg ◽  
...  
Keyword(s):  
Dental Implants ◽  
Fracture Load ◽  
Accelerated Ageing ◽  
Dental Ceramics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dental Restorations ◽  
Different Temperatures ◽  
Mechanical Performances ◽  
Kinetics Of

Due to growing demand for metal-free dental restorations, dental ceramics, especially dental zirconia, represent an increasing share of the dental implants market. They may offer mechanical performances of the same range as titanium ones. However, their use is still restricted by a lack of confidence in their durability and, in particular, in their ability to resist hydrothermal ageing. In the present study, the ageing kinetics of commercial zirconia dental implants are characterized by X-ray diffraction after accelerated ageing in an autoclave at different temperatures, enabling their extrapolation to body temperature. Measurements of the fracture loads show no effect of hydrothermal ageing even after ageing treatments simulated a 90-year implantation.

Sign in / Sign up

Export Citation Format

Share Document