Solid recovered fuels. Determination of potential rate of microbial self heating using the real dynamic respiration index

2007 ◽  
Keyword(s):  
The Real ◽  
Self Heating ◽  
Potential Rate

scholarly journals Potential of bio-drying applied to exhausted grape marc

Wine Studies ◽  
2012 ◽  
Vol 2 (1) ◽  
pp. 2 ◽  
Author(s):  
Elena Cristina Rada ◽  
Marco Ragazzi
Keyword(s):  
Water Content ◽  
Energy Content ◽  
Moisture Level ◽  
Drying Process ◽  
Self Heating ◽  
Grape Marc ◽  
Thermal Drying ◽  
Energy Options ◽  
Potential Rate

In the present work, experimentation was carried out to study the behavior of exhausted grape marc during the bio-drying process. This process was chosen as an alternative to the typical grape marc thermal drying approach. The aim was to reduce the moisture level thanks to the biological exothermal reactions, and to increase the energy content in the biodried grape marc. The target was the generation of a product interesting for energy options. For the development of the research, a biological pilot reactor and a respirometric apparatus were used. Results demonstrated that bio-drying can decrease the water content saving the original energy content. The final material could be assumed like a solid recovered fuel, class 5:1:1 with a very low potential rate of microbial self-heating.

scholarly journals RESEARCH OF THE TENSELY-DEFORMED STATE OF ELEMENTS OF MOBILE HEAT STORAGE

2020 ◽  
Vol 42 (2) ◽  
pp. 68-75
Author(s):  
V.G. Demchenko ◽  
А.S. Тrubachev ◽  
A.V. Konyk
Keyword(s):  
Mathematical Model ◽  
Heat Storage ◽  
Quantitative Estimation ◽  
The Real ◽  
State Of The Union ◽  
Real Geometry ◽  
Deformed State ◽  
The Mathematical Model ◽  
Minimization Of Functional

Worked out methodology of determination of the tensely-deformed state of elements of mobile heat storage of capacity type, that works in the real terms of temperature and power stress on allows to estimate influence of potential energy on resilient deformation that influences on reliability of construction and to give recommendations on planning of tank (capacities) of accumulator. For determination possibly of possible tension of construction of accumulator kinematics maximum terms were certain. As a tank of accumulator shows a soba the difficult geometrical system, the mathematical model of calculation of coefficient of polynomial and decision of task of minimization of functional was improved for determination of tension for Міzеs taking into account the real geometry of equipment. Conducted quantitative estimation of the tensely-deformed state of the union coupling, corps and bottom of thermal accumulator and the resource of work of these constructions is appraised. Thus admissible tension folds 225 МРа.

scholarly journals Determination of the Precise Coordinates of the GPS Reference Station in of a GBAS System in the Air Transport

2020 ◽  
Vol 22 (3) ◽  
pp. 11-18
Author(s):  
Kamil Krasuski ◽  
Stepan Savchuk
Keyword(s):  
Mathematical Model ◽  
Measurement Technique ◽  
Air Transport ◽  
Reference Station ◽  
The Real ◽  
Station Coordinates ◽  
Geocentric Coordinates

This paper presents results of research concerning determination of the GPS reference station coordinates located on the grounds of an EPDE airport in Deblin. The study uses a mathematical model of the PPP measurement technique in order to determine the coordinates of the reference station using the real GPS code-phase observations. The computations of the coordinates of the GPS reference station were carried out in numerical applications CSRS-PPP, APPS and GAPS. In this research was found that the accuracy of finding solutions to the XYZ geocentric coordinates of the reference station REF1 between solutions CSRS-PPP, APPS and GAPS ranges from 0.01m to 0.13m. In addition, the accuracy of determining the XYZ geocentric coordinates from the PPP method related to the GPS differential solution ranged from 0.01m to 0.11m.

scholarly journals Measuring thermal conductivity of soils under laboratory conditions.

1969 ◽  
Vol 17 (1) ◽  
pp. 71-79
Author(s):  
A.I. Golovanov
Keyword(s):  
Thermal Conductivity ◽  
Flow Velocity ◽  
Soil Sample ◽  
Water Flow ◽  
Coarse Sand ◽  
Conductivity Measurements ◽  
Soil Layers ◽  
The Real ◽  
Real Flow

Experiments were made to determine the influence of size of soil sample, convection and water flow on the determination of thermal conductivity of soils using a thin needle (0.05 cm radius, 8.5 cm in length) as the heating element and copper cylinders for sample containers. For measurements during a period of 100 seconds the diameter of the sample must be at least 4 cm and to avoid any influence of convection measurements should not exceed 100 seconds. When heating elements are placed horizontally to measure simultaneously the thermal conductivity of different soil layers they should be placed at least 10 cm apart. Thermal conductivity measurements could be used to determine flow velocities of water in coarse sand samples provided that the real flow velocity was highev than 0.35 cm/ min. (Abstract retrieved from CAB Abstracts by CABI’s permission)

scholarly journals Determination of available and carbonate antimony (Sb) in soil by Atomic Fluorescence Spectrometry

2021 ◽  
Vol 236 ◽  
pp. 02033
Author(s):  
Xiaoyan Ge ◽  
Qian Mo ◽  
Guofeng Wang ◽  
Yan Zhao ◽  
Yongyu Li ◽  
...  
Keyword(s):  
Recovery Rate ◽  
Atomic Fluorescence Spectrometry ◽  
Atomic Fluorescence ◽  
Average Recovery ◽  
The Real ◽  
Real Risk ◽  
Average Recovery Rate ◽  
Repeatability And Reproducibility ◽  
Water Bath Heating

Antimony (Sb) is a toxic and potentially carcinogenic metalloid element. The toxicity of Sb in the environment strongly relies on its speciation. It is necessary to investigate the speciation and content of antimony in soil in order to understand better the real risk associated with Sb in the environment. This study developed water bath heating and soaking-AFS methods to determine the available and carbonate antimony in soil. Through analysis and mutual verification experiments in three different laboratories, the repeatability and reproducibility in the precision experiment were less than 3.44, the average recovery rate was more than 98.1%. These methods were accurate, reproducible and effective for detecting the content of available and carbonate antimony in soil.

scholarly journals DETERMINATION OF THE REAL VALUES OF KINEMATIC INDEX CORRESPONDING TO THE MECHANICAL SEPARATION PROCESS

2017 ◽  
Vol 22 (2) ◽  
Author(s):  
EMILIAN MOȘNEGUȚU ◽  
VALENTIN NEDEFF ◽  
MIRELA PANAINTE-LEHĂDUȘ ◽  
NARCIS BÂRSAN ◽  
DANA CHIȚIMUȘ ◽  
...  
Keyword(s):  
Separation Process ◽  
Experimental Batch ◽  
Solid Particles ◽  
Common Method ◽  
The Real ◽  
Mechanical Separation

This article presents the methodology for determining the real values of kinematic indices which characterizes the mechanical separation of a mixture of solid particles. Mechanical separation of a mixture of solid-solid on surface provided with holes is the most common method of separation. To optimize equipment that performs this operation, both theoretical and practical characteristics are determined. Kinematic indices are part of the theoretical characteristics, helping to identify behavior of solid particles on a surface flat swing. Starting from an experimental batch, real values of the kinematic indices corresponding to up, down and sideways movement on the sieve were determined for the following types of real particles: grain, large grain beans, small grain beans and soybeans.

Sign in / Sign up

Export Citation Format

Share Document