scholarly journals Estudo das características do carvão ativado a partir do bagaço da cana-de-açúcar na adsorção do Chumbo em efluentes industriais / Study of the characteristics of activated carbon from sugarcane bagasse in lead adsorption in industrial effluents

2021 ◽  
Vol 7 (12) ◽  
pp. 117642-117667
Author(s):  
Larissa Amorim Fonseca ◽  
Mayron Mairink Franco de Castro ◽  
Margarete Aparecida Pereira
Keyword(s):  
Activated Carbon ◽  
Sugarcane Bagasse ◽  
Industrial Effluents ◽  
Lead Adsorption

scholarly journals Microporous activated carbon developed from KOH activated biomass waste: surface mechanistic study of methylene blue dye adsorption

2021 ◽  
Author(s):  
Ali H. Jawad ◽  
Ahmed Saud Abdulhameed ◽  
Noor Nazihah Bahrudin ◽  
Nurul Nadiah Mohd Firdaus Hum ◽  
S. N. Surip ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Surface Area ◽  
Sugarcane Bagasse ◽  
High Surface ◽  
High Surface Area ◽  
Dye Adsorption ◽  
Type I ◽  
Order Kinetic ◽  
Bagasse Waste

Abstract In this work, sugarcane bagasse waste (SBW) was used as a lignocellulosic precursor to develop a high surface area activated carbon (AC) by thermal treatment of the SBW impregnated with KOH. This sugarcane bagasse waste activated carbon (SBWAC) was characterized by means of crystallinity, porosity, surface morphology and functional groups availability. The SBWAC exhibited Type I isotherm which corresponds to microporosity with high specific surface area of 709.3 m2/g and 6.6 nm of mean pore diameter. Further application of SBWAC as an adsorbent for methylene blue (MB) dye removal demonstrated that the adsorption process closely followed the pseudo-second order kinetic and Freundlich isotherm models. On the other hand, thermodynamic study revealed the endothermic nature and spontaneity of MB dye adsorption on SBWAC with high acquired adsorption capacity (136.5 mg/g). The MB dye adsorption onto SBWAC possibly involved electrostatic interaction, H-bonding and π-π interaction. This work demonstrates SBW as a potential lignocellulosic precursor to produce high surface area AC that can potentially remove more cationic dyes from the aqueous environment.

Preparation of activated carbon dots from sugarcane bagasse for naphthalene removal from aqueous solutions

2018 ◽  
Vol 53 (16) ◽  
pp. 2536-2549 ◽  
Author(s):  
Azadeh Eslami ◽  
Seyed Mehdi Borghei ◽  
Alimorad Rashidi ◽  
Afshin Takdastan
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Sugarcane Bagasse ◽  
Carbon Dots

Application of response surface methodology to optimize the fabrication of ZnCl2-activated carbon from sugarcane bagasse for the removal of Cu2+

2017 ◽  
Vol 75 (9) ◽  
pp. 2047-2055 ◽  
Author(s):  
Thuan Van Tran ◽  
Quynh Thi Phuong Bui ◽  
Trinh Duy Nguyen ◽  
Van Thi Thanh Ho ◽  
Long Giang Bach
Keyword(s):  
Response Surface Methodology ◽  
Activated Carbon ◽  
Response Surface ◽  
Sugarcane Bagasse ◽  
Interactive Effect ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Aqueous Environment ◽  
Activation Temperature

The present study focused on the application of response surface methodology to optimize the fabrication of activated carbon (AC) from sugarcane bagasse for adsorption of Cu2+ ion. The AC was synthesized via chemical activation with ZnCl2 as the activating agent. The central composite design based experiments were performed to assess the individual and interactive effect of influential parameters, including activation temperature, ZnCl2 impregnation ratio and activation time on the AC yield and removal of Cu2+ ion from the aqueous environment. The statistically significant, well-fitting quadratic regression models were successfully developed as confirmed by high F- and low P-values (<0.0001), high correlation coefficients and lack-of-fit tests. Accordingly, the optimum AC yield and removal efficiency of Cu2+ were predicted, respectively, as 48.8% and 92.7% which were approximate to the actual values. By applying the predicted optimal parameters, the AC shows a surprisingly high surface area of around 1,500 m2/g accompanied by large pore volume and narrow micropore size at low fabrication temperature.

Preparation of Activated Carbon Monolith Electrodes from Sugarcane Bagasse by Physical and Physical-Chemical Activation Process for Supercapacitor Application

2014 ◽  
Vol 896 ◽  
pp. 179-182 ◽  
Author(s):  
Erman Taer ◽  
Iwantono ◽  
Saidul Tua Manik ◽  
R. Taslim ◽  
D. Dahlan ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Sugarcane Bagasse ◽  
Chemical Activation ◽  
Physical Activation ◽  
Activation Process ◽  
X Ray Diffraction ◽  
Supercapacitor Application ◽  
Carbon Monolith ◽  
Physical Chemical ◽  
Activated Carbon Monoliths

Binderless activated carbon monoliths (ACMs) for supercapacitor electrodes were prepared from sugarcane bagasse by two different methods of physical and combination of physical-chemical activation process. The CO2 gas was used as physical activation agent and 0.3 M KOH was chosen as chemical activation agent. The ACMs were tested as electrodes in two-electrode systems of the coin tape cell supercapacitor that consists of stainless steel as current collectors and 1 M H2SO4 as an electrolyte. The improving of resistive, capacitive and energy properties of combination of physical-chemical ACMs electrodes were shown by an impedance spectroscopy, a cyclic voltammetry and a galvanostatic charge-discharge method. The improving of resistive, capacitive and energy properties as high as 1 to 0.6 Ω, 146 to 178 F g-1, 3.83 to 4.72 W h kg-1, respectively. The X-ray diffraction analysis and field emission scanning electron microscope were performed to characterize the crystallite and morphology characteristics. The results showed that the combination of physical-chemical activation process have given a good improving in performance of the bagasse based ACMs electrodes in supercapacitor application.

scholarly journals Effect of Phosphoric Acid Concentration on the Characteristics of Sugarcane Bagasse Activated Carbon

2016 ◽  
Vol 136 ◽  
pp. 012061 ◽  
Author(s):  
M R M Adib ◽  
W M S W Suraya ◽  
H Rafidah ◽  
A R M Amirza ◽  
M H M N Attahirah ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Acid Concentration ◽  
Sugarcane Bagasse ◽  
Phosphoric Acid Concentration

scholarly journals Karakteristik luas permukaan karbon aktif dari ampas tebu dengan aktivasi kimia

2018 ◽  
Vol 10 (3) ◽  
pp. 149
Author(s):  
Mahmud Sudibandriyo ◽  
L Lydia
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Sugarcane Bagasse ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Physical Activation ◽  
Mass Ratio ◽  
Characterization Of Activated Carbon

Surface area characterization of activated carbon from sugarcane baggase by chemical activationAdsorption is one the process with many applications in the industries such as in a separation or in gas storage. In this adsorption, adsorbent selection is the most important thing. One of the adsorbent most suitable for this process is activated carbon. Previous studies show that high surface area of activated carbon can be produced from sugarcane bagasse using activator ZnCl2. The research’s goal is to produce activated carbon from sugarcane bagasse and determine the effects of activator on the surface area of activated carbon produced. Activators used in this research are KOH and ZnCl2 with the mass ratio of activator/carbon are 1/1, 2/1 and 3/1. The results show that The highest surface area, 938,2 m2/g, is obtained by activation using KOH with mass ratio of activator/carbon 3/1, whereas the highest surface area by activation using ZnCl2 is 632 m2/g with mass ratio of activator/carbon 2/1. For comparison, preparation of activated carbon by physical activation is also done and the surface area is 293 m2/g.Keywords: Activated carbon, chemical activation, sugarcane bagasse, KOH, ZnCl2 Abstrak Adsorpsi merupakan salah satu proses yang banyak digunakan dalam industri baik dalam pemisahan maupun untuk penyimpanan gas. Pada proses adsorpsi ini, pemilihan adsorben merupakan hal yang sangat penting. Salah satu jenis adsorben yang sangat cocok untuk proses ini adalah karbon aktif. Penelusuran studi sebelumnya menunjukkan bahwa karbon aktif dengan luas permukaan yang cukup tinggi dapat dibuat dari ampas tebu dengan menggunakan aktivator ZnCl2. Penelitian ini bertujuan untuk menghasilkan karbon aktif dari ampas tebu dengan aktivasi kimia serta mengetahui pengaruh aktivator terhadap luas permukaan karbon aktif yang dihasilkan. Aktivator yang digunakan dalam penelitian ini adalah KOH dan ZnCl2 dengan rasio massa aktivator/massa karbon 1/1, 2/1, dan 3/1. Aktivasi dilakukan pada temperatur 700 oC selama 1 jam. Hasil penelitian menunjukkan bahwa luas permukaan tertinggi sebesar 938,2 m2/g diperoleh dengan aktivasi menggunakan KOH dengan rasio massa aktivator/massa arang 3/1, sedangkan aktivasi dengan menggunakan ZnCl2 diperoleh luas permukaan tertinggi sebesar 632 m2/g dengan rasio massa aktivator/massa arang 2/1. Sebagai pembanding, pada penelitian ini juga dilakukan pembuatan karbon aktif dengan metode aktivasi fisika dan diperoleh luas permukaan karbon aktif sebesar 293 m2/g.Kata kunci: Aktivasi kimia, ampas tebu, karbon aktif, KOH, ZnCl2

scholarly journals Chemical and physical preparation of activated carbon using Raw bagasse for cationic dye adsorption

2016 ◽  
Vol 18 (2) ◽  
pp. 402-415 ◽  
Keyword(s):  
Activated Carbon ◽  
Sugarcane Bagasse ◽  
Contact Time ◽  
Dye Adsorption ◽  
Isotherm Models ◽  
Adsorptive Capacity ◽  
Adsorption Isotherm Models ◽  
Equilibrium Data ◽  
Agriculture Wastes ◽  
Physical Preparation

<div> <p>Agriculture wastes like sugarcane bagasse are available in large quantities in Egypt. Various adsorbents from natural materials, industrial waste materials, agricultural by-products, and biomass based activated carbon can be used in the removal of various dyes. Raw Bagasse pith (RBP) was used to prepare activated carbon (AC) using phosphoric acid (H<sub>3</sub>PO<sub>4</sub>) as a chemical activating agent. C The raw BP and the synthesized adsorbent were characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscope (SEM). The effectiveness of AC prepared in adsorption of methylene blue (MB) has been studied as a function of adsorbent type, initial dye concentration and contact time. The effects of the initial dye concentration and contact time were evaluated. Adsorption isotherm models - Langmuir, Freundlich and Temkin were used to simulate the equilibrium data. Langmuir equation was found to have the highest value of R<sup>2</sup> compared with other models. Furthermore, it was found that sugarcane bagasse have a high adsorptive capacity towards MB.</p> </div> <p>&nbsp;</p>

Sign in / Sign up

Export Citation Format

Share Document