scholarly journals A Low-Crossover and Fast-Kinetics Thiolate Negolyte for Aqueous Redox Flow Batteries

2022 ◽  
Vol 2022 ◽  
pp. 1-11
Author(s):  
Bin Yang ◽  
Zengyue Wang ◽  
Wanwan Wang ◽  
Yi-Chun Lu
Keyword(s):  
Reaction Kinetics ◽  
Large Scale ◽  
Coulombic Efficiency ◽  
Low Cost ◽  
High Capacity ◽  
Fast Kinetics ◽  
Redox Flow Batteries ◽  
Crossover Rate ◽  
Flow Batteries ◽  
Kinetics Of

Aqueous redox flow batteries (ARFBs) are a promising technology for large-scale energy storage. Developing high-capacity and long-cycle negolyte materials is one of major challenges for practical ARFBs. Inorganic polysulfide is promising for ARFBs owing to its low cost and high solubility. However, it suffers from severe crossover resulting in low coulombic efficiency and limited lifespan. Organosulfides are more resistant to crossover than polysulfides owing to their bulky structures, but they suffer from slow reaction kinetics. Herein, we report a thiolate negolyte prepared by an exchange reaction between a polysulfide and an organosulfide, preserving low crossover rate of the organosulfide and high reaction kinetics of the polysulfide. The thiolate denoted as 2-hydroxyethyl disulfide+potassium polysulfide (HEDS+K2S2) shows reduced crossover rate than K2S2, faster reaction kinetics than HEDS, and longer lifespan than both HEDS and K2S2. The 1.5 M HEDS+1.5 M K2S2 static cell demonstrated 96 Ah L-1negolyte over 100 and 200 cycles with a high coulombic efficiency of 99.2% and 99.6% at 15 and 25 mA cm-2, respectively. The 0.5 M HEDS+0.5 M K2S2 flow cell delivered a stable and high capacity of 30.7 Ah L-1negolyte over 400 cycles (691 h) at 20 mA cm-2. This study presents an effective strategy to enable low-crossover and fast-kinetics sulfur-based negolytes for advanced ARFBs.

Recent progress in zinc-based redox flow batteries: a review

2021 ◽  
Author(s):  
Guixiang Wang ◽  
Haitao Zou ◽  
Xiaobo Zhu ◽  
Mei Ding ◽  
Chuankun Jia
Keyword(s):  
High Performance ◽  
Large Scale ◽  
Electrode Materials ◽  
Low Cost ◽  
Ion Selectivity ◽  
Commercial Application ◽  
Environmental Friendliness ◽  
Membrane Materials ◽  
Redox Flow Batteries ◽  
Flow Batteries

Abstract Zinc-based redox flow batteries (ZRFBs) have been considered as ones of the most promising large-scale energy storage technologies owing to their low cost, high safety, and environmental friendliness. However, their commercial application is still hindered by a few key problems. First, the hydrogen evolution and zinc dendrite formation cause poor cycling life, of which needs to ameliorated or overcome by finding suitable anolytes. Second, the stability and energy density of catholytes are unsatisfactory due to oxidation, corrosion, and low electrolyte concentration. Meanwhile, highly catalytic electrode materials remain to be explored and the ion selectivity and cost efficiency of membrane materials demands further improvement. In this review, we summarize different types of ZRFBs according to their electrolyte environments including ZRFBs using neutral, acidic, and alkaline electrolytes, then highlight the advances of key materials including electrode and membrane materials for ZRFBs, and finally discuss the challenges and perspectives for the future development of high-performance ZRFBs.

scholarly journals Conversion of Spent Coffee Beans to Electrode Material for Vanadium Redox Flow Batteries

Batteries ◽  
2018 ◽  
Vol 4 (4) ◽  
pp. 56 ◽  
Author(s):  
Vida Krikstolaityte ◽  
Oh Joshua ◽  
Andrei Veksha ◽  
Nyunt Wai ◽  
Grzegorz Lisak ◽  
...  
Keyword(s):  
Surface Area ◽  
Electrode Material ◽  
Low Cost ◽  
Redox Flow Batteries ◽  
Graphite Plate ◽  
Coffee Beans ◽  
Flow Batteries ◽  
Activation Times ◽  
Vanadium Redox ◽  
Kinetics Of

This study presents the application of pyrolyzed spent coffee beans as a potential electrode material to replace commercial bipolar graphite plate in vanadium redox flow batteries (VRB). The results indicate that the biochar obtained from spent coffee beans shows relatively good electrochemical charge transfer kinetics of vanadium redox reactions as well as generates higher energy and voltage efficiency in a static cell test when compared to TF6 bipolar graphite plate. Additionally, the biochar was activated via steam at various activation times to increase its surface area, and their effect on the kinetics of the electrochemical reactions was investigated. The activated carbon did not exhibit any improvement neither in electron transfer kinetics nor in the battery efficiency, despite their increased surface area. The performed studies demonstrate that the biochar obtained from spent coffee beans can be a low-cost electrode material for VRB with improved performance characteristics.

scholarly journals Progress and directions in low-cost redox-flow batteries for large-scale energy storage

2017 ◽  
Vol 4 (1) ◽  
pp. 91-105 ◽  
Author(s):  
Bin Li ◽  
Jun Liu
Keyword(s):  
Energy Storage ◽  
Large Scale ◽  
Low Cost ◽  
Lithium Ion ◽  
High Energy ◽  
Water Soluble ◽  
Side Reactions ◽  
Aqueous Systems ◽  
Redox Flow Batteries ◽  
Flow Batteries

Abstract Compared to lithium-ion batteries, redox-flow batteries have attracted widespread attention for long-duration, large-scale energy-storage applications. This review focuses on current and future directions to address one of the most significant challenges in energy storage: reducing the cost of redox-flow battery systems. A high priority is developing aqueous systems with low-cost materials and high-solubility redox chemistries. Highly water-soluble inorganic redox couples are important for developing technologies that can provide high energy densities and low-cost storage. There is also great potential to rationally design organic redox molecules and fine-tune their properties for both aqueous and non-aqueous systems. While many new concepts begin to blur the boundary between traditional batteries and redox-flow batteries, breakthroughs in identifying/developing membranes and separators and in controlling side reactions on electrode surfaces also are needed.

scholarly journals Vanadium Redox Flow Batteries: A Review Oriented to Fluid-Dynamic Optimization

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 176
Author(s):  
Iñigo Aramendia ◽  
Unai Fernandez-Gamiz ◽  
Adrian Martinez-San-Vicente ◽  
Ekaitz Zulueta ◽  
Jose Manuel Lopez-Guede
Keyword(s):  
Large Scale ◽  
Numerical Models ◽  
Fluid Dynamic ◽  
Renewable Energy Sources ◽  
Vanadium Redox Flow Battery ◽  
Redox Flow Batteries ◽  
Design Flexibility ◽  
Flow Batteries ◽  
Exchange Membrane ◽  
Vanadium Redox

Large-scale energy storage systems (ESS) are nowadays growing in popularity due to the increase in the energy production by renewable energy sources, which in general have a random intermittent nature. Currently, several redox flow batteries have been presented as an alternative of the classical ESS; the scalability, design flexibility and long life cycle of the vanadium redox flow battery (VRFB) have made it to stand out. In a VRFB cell, which consists of two electrodes and an ion exchange membrane, the electrolyte flows through the electrodes where the electrochemical reactions take place. Computational Fluid Dynamics (CFD) simulations are a very powerful tool to develop feasible numerical models to enhance the performance and lifetime of VRFBs. This review aims to present and discuss the numerical models developed in this field and, particularly, to analyze different types of flow fields and patterns that can be found in the literature. The numerical studies presented in this review are a helpful tool to evaluate several key parameters important to optimize the energy systems based on redox flow technologies.

Large-scale and low cost synthesis of graphene as high capacity anode materials for lithium-ion batteries

Carbon ◽  
2013 ◽  
Vol 64 ◽  
pp. 158-169 ◽  
Author(s):  
Shuangqiang Chen ◽  
Peite Bao ◽  
Linda Xiao ◽  
Guoxiu Wang
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Materials ◽  
Large Scale ◽  
Low Cost ◽  
High Capacity ◽  
Lithium Ion

Electrodeposited reduced graphene oxide as a highly efficient and low-cost electrocatalyst for vanadium redox flow batteries

2019 ◽  
Vol 297 ◽  
pp. 31-39 ◽  
Author(s):  
Pooria Moozarm Nia ◽  
Ebrahim Abouzari-Lotf ◽  
Pei Meng Woi ◽  
Yatimah Alias ◽  
Teo Ming Ting ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Low Cost ◽  
Redox Flow Batteries ◽  
Highly Efficient ◽  
Reduced Graphene ◽  
Flow Batteries ◽  
Vanadium Redox

Three-dimensional annealed WO3 nanowire/graphene foam as an electrocatalytic material for all vanadium redox flow batteries

2017 ◽  
Vol 1 (10) ◽  
pp. 2091-2100 ◽  
Author(s):  
Daniel Manaye Kabtamu ◽  
Yu-Chung Chang ◽  
Guan-Yi Lin ◽  
Anteneh Wodaje Bayeh ◽  
Jian-Yu Chen ◽  
...  
Keyword(s):  
Graphene Sheet ◽  
Tungsten Trioxide ◽  
Low Cost ◽  
Three Dimensional ◽  
Graphene Foam ◽  
Redox Flow Batteries ◽  
Flow Batteries ◽  
Vanadium Redox

This paper presents a three-dimensional annealed tungsten trioxide nanowire/graphene sheet (3D annealed WO3 NWs/GS) foam as an excellent and low-cost electrocatalyst.

scholarly journals Interfacial Manipulation via In-Situ Grown ZnSe Overlayer toward Highly Reversible Zn Metal Anodes

2021 ◽  
Author(s):  
Xianzhong Yang ◽  
Chao Li ◽  
Zhongti Sun ◽  
Shuai Yang ◽  
Zixiong Shi ◽  
...  
Keyword(s):  
Large Scale ◽  
Coulombic Efficiency ◽  
Low Cost ◽  
Chemical Vapor ◽  
Side Reactions ◽  
Water Penetration ◽  
Metal Anode ◽  
Zn Anode ◽  
Manipulation Strategy

Abstract Zn metal anode has garnered growing scientific and industrial interest owing to its appropriate redox potential, low cost and good safety. Nevertheless, the instability of Zn metal, caused by dendrite formation, hydrogen evolution and side reactions, gives rise to poor electrochemical stability and unsatisfactory cycling life, greatly hampering large-scale utilization. Herein, an in-situ grown ZnSe layer with controllable thickness is crafted over one side of commercial Zn foil via chemical vapor deposition, aiming to achieve optimized interfacial manipulation between aqueous electrolyte/Zn anode. Thus-derived ZnSe overlayer not only prevents water penetration and restricts Zn2+ two-dimensional diffusion, but also homogenizes the electric field at the interface and facilitates favorable (002) plane growth of Zn. As a result, dendrite-free and homogeneous Zn deposition is obtained; side reactions are concurrently inhibited. In consequence, a high Coulombic efficiency of 99.2% and high cyclic stability for 860 cycles at 1.0 mA cm–2 in symmetrical cells is harvested. Meanwhile, when paired with V2O5 cathode, assembled full cell achieves an outstanding initial capacity (200 mAh g–1) and elongated lifespan (a capacity retention of 84% after 1000 cycles) at 5.0 A g–1. Our highly reversible Zn anode enabled by the interfacial manipulation strategy is anticipated to satisfy the demand of industrial and commercial use.

scholarly journals Tuning the Performance of Aqueous Organic Redox Flow Batteries from First Principles

2020 ◽  
Author(s):  
Junting Yu ◽  
Tianshou Zhao ◽  
Ding Pan
Keyword(s):  
Energy Storage ◽  
First Principles ◽  
High Performance ◽  
Large Scale ◽  
Electrical Energy ◽  
Ab Initio Molecular Dynamics ◽  
Redox Potentials ◽  
Redox Flow Batteries ◽  
Flow Batteries ◽  
Entropy Effects

<div>Aqueous organic redox flow batteries have many appealing properties in the application of large-scale energy storage. The large chemical tunability of organic electrolytes shows great potential to improve the performance of flow batteries. Computational studies at the quantum-mechanics level are very useful to guide experiments, but in previous studies explicit water interactions and thermodynamic effects were ignored. Here, we applied the computational electrochemistry method based on ab initio molecular dynamics to calculate redox potentials of quinones and their derivatives. The calculated results are in excellent agreement with experimental data. We mixed side chains to tune their reduction potentials, and found that solvation interactions and entropy effects play a significant role in side-chain engineering. Based on our calculations, we proposed several high-performance negative and positive electrolytes. Our first-principles study paves the way towards the development of large-scale and sustainable electrical energy storage.</div>

Sign in / Sign up

Export Citation Format

Share Document