scholarly journals Formulation and In Vitro Evaluation of Casein Nanoparticles as Carrier for Celecoxib

2020 ◽  
Vol 10 (3) ◽  
pp. 408-417
Author(s):  
Jyotsana R. Madan ◽  
Izharahemad N. Ansari ◽  
Kamal Dua ◽  
Rajendra Awasthi
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Water Soluble ◽  
Polydispersity Index ◽  
Drug Dissolution ◽  
Permeation Studies ◽  
Poorly Water Soluble

Purpose : The objective of this work was to formulate casein (CAS) nanocarriers for the dissolution enhancement of poorly water soluble drug celecoxib (CLXB). Methods: The CLXB loaded CAS nanocarriers viz., nanoparticles, reassembled CAS micelles and nanocapsules were prepared using sodium caseinate (SOD-CAS) as a carrier to enhance the solubility of CLXB. The prepared formulations were characterized for particle size, polydispersity index, zeta potential, percentage entrapment efficiency, and surface morphology for the selection of best formulation. Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction study was used to for the confirmation of encapsulation of CLXB. Further, in vitro drug dissolution, ex-vivo permeation studies on chicken ileum and stability studies were carried out. Results: The CLXB loaded casein nanoparticles (CNP) (batch A2) showed a particle size diameter 216.1 nm, polydispersity index 0.422 with percentage entrapment efficiency of 90.71% and zeta potential of -24.6 mV. Scanning electron microscopy of suspension confirmed globular shape of CNP. The in vitro release data of optimized batch followed non Fickian diffusion mechanism. The ex vivo permeation studies on chicken ileum of CLXB loaded CNP showed permeation through mucous membrane as compared to pure CLXB. The apparent permeability of best selected freeze dried CLXB loaded CNP (batch A2) was higher and gradually increased from 0.90 mg/cm2 after 10 min to a maximum of 1.95 mg/cm2 over the subsequent 90 min. A higher permeation was recorded at each time point than that of the pure CLXB. Conclusion: The study explored the potential of CAS as a carrier for solubility enhancement of poorly water soluble drugs.

scholarly journals Water Soluble Chitosan Mediated Voriconazole Microemulsion as Sustained Carrier for Ophthalmic Application: In vitro/Ex vivo/In vivo Evaluations

2016 ◽  
Vol 3 (1) ◽  
pp. 215-234 ◽  
Author(s):  
Rohit Bhosale ◽  
Omkar Bhandwalkar ◽  
Anita Duduskar ◽  
Rahul Jadhav ◽  
Pravin Pawar
Keyword(s):  
Zeta Potential ◽  
Phase Diagrams ◽  
Droplet Size ◽  
Ex Vivo ◽  
Water Soluble ◽  
Polydispersity Index ◽  
Modified Chitosan ◽  
Mucoadhesive Polymer

Background: Voriconazole (VCZ) is a lipophilic candidate, effective against fungal infections like ocular keratitis and endopthalmitis. Objective: The purpose to develop, optimize and characterize voriconazole microemulsion as sustained medication for ophthalmic application. Methods: The pseudo-ternary phase diagrams were developed using oleic acid, isopropyl myristate and isopropyl palmitate (oil phases), tween 80 (surfactant), propylene glycol (co-surfactant), distilled water (aqueous phase) and modified chitosan (Mod.CH) as mucoadhesive polymer. The optimum composition of oil, Smix and water was selected on the basis of phase diagrams and as mucoadhesive polymer Mod.CH was used in the formulations. All the formulations were evaluated for thermodynamic stability/dispersibility, physicochemical parameters (droplet size, polydispersity index, zeta potential, drug content, viscosity, pH and conductivity), in vitro, ex vivo and in vivo studies. Results: All formulations showed droplet size below 250 nm, positive zeta potential and polydispersity index below 0.5. The in vitro drug release study performed on selected formulations showed maximum sustained release than marketed formulation. The in vitro transcorneal permeation experiment of formulations suggests that optimized formulations showed better permeation. The selected formulation of voriconazole microemulsion was able to produce maximum antifungal activity against Candida albicans when compared to marketed formulation. In vivo study performed on rabbit eyes, found more drug concentration in aqueous humor of optimized formulation; the AUC0→t of IPMVM-11 was approximately 6.84-fold higher than VOZOLE and efficiently enhanced the corneal bioavailability. Conclusion: The modified chitosan based on voriconazole loaded microemulsion was promising novel carrier for sustained action in ophthalmic medication.

scholarly journals FORMULATION, OPTIMIZATION, AND IN VITRO EVALUATION OF POLYMERIC NANOSUSPENSION OF FLURBIPROFEN

2019 ◽  
pp. 183-191
Author(s):  
PANKAJ JADHAV ◽  
ADHIKRAO YADAV
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Transmission Electron

Objective: At present, more than 40% of drugs are poorly water-soluble that leads to reduced bioavailability. The objective of the present investigation was to overcome the issue of poor aqueous solubility of drug; therefore, stable flurbiprofen (FBF) nanosuspensions were developed by nanoprecipitation method. Materials and Methods: Based on particle size, zeta potential, and entrapment efficiency, the polymeric system of hydroxypropyl methylcellulose E15 and poloxamer 188 was used effectively. The prepared formulations were evaluated for Fourier transform infrared spectroscopy, transmission electron microscopy, differential scanning calorimetry, powder X-ray diffraction, saturation solubility, entrapment efficiency, particle size, zeta potential, dissolution profile, and stability. Results: The resultant FBF nanosuspensions depicted particles in size range of 200–400 nm and were physically stable. After nanonization, the crystallinity of FBF was slightly reduced in the presence of excipients. The aqueous solubility and dissolution rate of all FBF nanosuspensions were significantly increased as compared with FBF powder. Conclusion: This investigation demonstrated that nanoprecipitation is a promising method to develop stable polymeric nanosuspension of FBF with significant increase in its aqueous solubility.

scholarly journals Ezetimibe-Loaded Nanostructured Lipid Carrier Based Formulation Ameliorates Hyperlipidaemia in an Experimental Model of High Fat Diet

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1485
Author(s):  
Yogeeta O. Agrawal ◽  
Umesh B. Mahajan ◽  
Vinit V. Agnihotri ◽  
Mayur S. Nilange ◽  
Hitendra S. Mahajan ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
High Fat Diet ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Nanostructured Lipid Carrier ◽  
High Fat ◽  
Scanning Calorimetry ◽  
Bioavailability Enhancement

Ezetimibe (EZE) possesses low aqueous solubility and poor bioavailability and in addition, its extensive hepatic metabolism supports the notion of developing a novel carrier system for EZE. Ezetimibe was encapsulated into nanostructured lipid carriers (EZE-NLCs) via a high pressure homogenization technique (HPH). A three factor, two level (23) full factorial design was employed to study the effect of amount of poloxamer 188 (X1), pressure of HPH (X2) and number of HPH cycle (X3) on dependent variables. Particle size, polydispersity index (PDI), % entrapment efficiency (%EE), zeta potential, drug content and in-vitro drug release were evaluated. The optimized formulation displays pragmatic inferences associated with particle size of 134.5 nm; polydispersity index (PDI) of 0.244 ± 0.03; zeta potential of −28.1 ± 0.3 mV; % EE of 91.32 ± 1.8% and % CDR at 24-h of 97.11%. No interaction was observed after X-ray diffraction (XRD) and differential scanning calorimetry (DSC) studies. EZE-NLCs (6 mg/kg/day p.o.) were evaluated in the high fat diet fed rats induced hyperlipidemia in comparison with EZE (10 mg/kg/day p.o.). Triglyceride, HDL-c, LDL-c and cholesterol were significantly normalized and histopathological evaluation showed normal structure and architecture of the hepatocytes. The results demonstrated the superiority of EZE-NLCs in regard to bioavailability enhancement, dose reduction and dose-dependent side effects.

scholarly journals Formulation, optimization and in vitro evaluation of nanostructured lipid carriers for topical delivery of apremilast

2020 ◽  
Author(s):  
Jyotsana R Madan ◽  
Shweta Khobaragade ◽  
Kamal Dua ◽  
Rajendra Awasthi
Keyword(s):  
Zeta Potential ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Nanostructured Lipid Carriers ◽  
Water Soluble ◽  
Polydispersity Index ◽  
Drug Diffusion ◽  
Solid Lipid ◽  
Skin Deposition

This work was aimed to formulate topical Apremilast loaded nanostructured lipid-carriers (NLCs) for the management of psoriasis. Psoriasis is a widespread skin condition considered to be a Th1 autoimmune skin disease and characterized by excessive growth and abnormal differentiation of keratinocytes. Objective of the study was to investigate the applicability of lipid matrix of NLC composed of solid lipid and liquid lipid (oil), creating imperfections in the crystal lattice, in improving drug loading as well as physical stability. NLCs were prepared by a cold homogenization technique using Compritol® 888ATO, oleic acid, Tween 80 and Span 20, and Transcutol P as a solid lipid, liquid lipid, surfactant mixture and penetration enhancer, respectively. Carbopol 940 was used to convert NLC dispersion into NLC based hydrogel to improve its viscosity for topical administration. The optimized formulation was characterized for size, polydispersity index, zeta potential, percentage entrapment efficiency (%EE), and surface morphology. Further, viscosity, spreadability, stability, in- vitro drug diffusion, ex-vivo skin permeation and skin deposition studies were carried out. Apremilast loaded NLCs showed narrow polydispersity index (PDI- 0.339) with particle size of 758 nm, %EE of 85.5% and zeta potential of -33.3 mV. Scanning electron microscopy confirmed spherical shape of NLCs. In vitro drug diffusion and ex vivo skin permeation results showed low drug diffusion and sustained drug release and 60.1% skin deposition. The present study confirms the potential of the nanostructured lipid form of poorly water-soluble drugs for topical application and increased drug deposition in the skin.

scholarly journals Andrographolide-loaded ethosomal gel for transdermal application: Formulation and in vitro penetration study

2021 ◽  
Author(s):  
Nooryza Martihandini ◽  
Silvia Surini ◽  
Anton Bahtiar
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Transdermal Delivery ◽  
Weight Ratio ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Transmission Electron Micrograph ◽  
C 30 ◽  
The Stability

Background: Andrographolide is a phytoconstituent with anti-inflammatory activity, however, the compound’s poor oral bioavailability has hindered its effective formulation for oral administration. This study, therefore, aims to develop an ethosome for improving andrographolide penetration through the transdermal delivery system. Methods: This study developed 3 ethosome formulas with different andrographolide-phospholipid weight ratios (1:8, 1:9; 1:10), using the thin-layer dispersion-sonication method. Subsequently, the ethosomes were evaluated for particle size, polydispersity index, zeta potential, morphology, as well as entrapment efficiency, and incorporated into a gel dosage form. Subsequently, an in vitro penetration study was performed using Franz diffusion cells for 24 hours and the stability of the gels at 5 ± 2°C, 30 ± 2°C, and 40 ± 2°C, were studied for 3 months. Results: The results showed the optimal formula was E2, a 1:9 weight ratio formula of andrographolide and phospholipid. Based on the transmission electron micrograph, E2 possessed unilamellar, as well as spherical-shaped vesicles, and exhibited superior characteristics for transdermal delivery, with a particle size of 89.95 ± 0.75 nm, polydispersity index of 0.254 ± 0.020, a zeta potential of -39.3 ± 0.82 mV, and entrapment efficiency of 97.89 ± 0.02%. Furthermore, the cumulative andrographolide penetration and transdermal flux for the ethosomal gel of E2 (EG2) were 129.25 ± 4.66 µg/cm2 and 5.16 ± 0.10 µg/cm2/hours, respectively. All the ethosomal gel formulations exhibited improved penetration enhancement of andrographolide, compared to the nonethosomal formulations. Also, the andrographolide levels in the ethosomal and nonethosomal gels after 3 months ranged from 98.13 to 104.19%, 97.93 to 104.01%, and 97.23 to 102.26% at storage temperatures of 5 ± 2°C, 30 ± 2°C/RH 65% ± 5%, and 40 ± 2°C/RH 75% ± 5%, respectively. Conclusions: This study concluded that encapsulation into ethosome enhances andrographolide delivery through the skin.

scholarly journals Development and Evaluation of Lapatinib Solid Lipid Nanoparticles in the Management of Breast Cancer

2019 ◽  
Vol 11 (05) ◽  
Author(s):  
Pamu Sandhya
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Drug Dissolution ◽  
Dissolution Studies ◽  
Solid Lipid

The current research was aimed at formulation of Lapatinib loaded solid lipid nanoparticles (SLNs) followed by evaluation for effective treatment of breast cancer. The formulations prepared by homogenization and ultrasonication and evaluated for zeta potential, particle size, polydispersity index, entrapment efficiency and in- vitro dissolution studies. Entrapment efficiency studies indicated proportional relation between concentration of lipid and the amount of drug entrapped. The physicochemical parameter evaluation data indicated 94.27% entrapment efficiency, 130 nm particle size and -19.9 zeta potential for stable formulation. The in vitro drug dissolution studies indicated that Lapatinib loaded SLNs (F6) formulated with Dynasan 116 and Egg Lecithin was suitable for anti-cancer therapy with higher drug dissolution rate.

scholarly journals Design, Formulation, In-Vitro and Ex-Vivo Evaluation of Atazanavir Loaded Cubosomal Gel

2020 ◽  
Vol 11 (4) ◽  
pp. 12037-12054
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Relative Bioavailability ◽  
Transdermal Application ◽  
Study Results ◽  
Nano Formulation

In this study, Atazanavir (ATZ) was designed into the Nano formulation called cubosomes to improve its bioavailability and curtail the adverse effects by the transdermal route delivery of ATZ -loaded cubosomes. Around twenty cubosomal formulations were formulated using a Central composite factorial design. The effect of glyceryl monooleate (GMO), surfactant (Pluronic F 127), and Cetyltrimethylammonium bromide (CTAB) were studied using processes of emulsification and homogenization. Different concentrations of independent variables on particle size distribution, zeta potential, and entrapment efficiency were determined. FTIR, DSC, X-ray, and SEM, TEM results established that the drug was encapsulated in the cubosomes. The results suggested that the optimal formula exhibited a particle size of 100±7.9 - 345±6.4 nm and entrapment efficiency ranging from 61±4.6 - 93±0.8, zeta potential values ranging from -24.51 to -32.45 mV, polydispersity index values ranged from 0.35±0.01-0.54±0.02 of ATZ. The in vitro studies showed a controlled release pattern of drug release up to 24h. The ATZ cubosomal gel application on the in vivo absorption studies of the drug was studied in rats and compared with oral ATZ solution. The in vivo study results showed that the transdermal application of ATZ cubosomal gel considerably improves the absorption of drug compared to that of oral ATZ solution and found that the relative bioavailability is 4.6 times greater of oral ATZ solution. Thus it can be concluded that the ATZ cubosomal gel application via transdermal delivery route has the potential in increasing the bioavailability of the drug.

Novel Simultaneous Identification of Capsaicin and It’s Quantification in Transferosome Formulation By HP-TLC Technique

2020 ◽  
Vol 17 (1) ◽  
pp. 172-183
Author(s):  
Nandanwadkar Shrikrishna Madhukar Hema ◽  
Mastiholimath Vinayak Shivamurthy ◽  
Pulija Karunakar
Keyword(s):  
Particle Size ◽  
Quality Control ◽  
Regression Analysis ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Average Recovery ◽  
Morphological Studies ◽  
Drug Entrapment Efficiency ◽  
Different Levels

Introduction: Capsaicin (8-methy-N-vanillyl-6-nonenamide), a potential analgesic derived from Capsicum annuum (Chili peppers), widely used from ancient times for its pharmacological activities such as anti-inflammatory, anti-oxidant and analgesic and provides relief from migraine and diabetes. But for obvious reasons, capsaicin cannot be administered directly. The present work was designed with a focus to comply with mandatory requirement in various pharmacopeias to know the actual content of API present in final formulations. The formulation (TS3) consisting of 3% lipid, with 4:6 ratio of the polymer and solvent, was found to be the optimized formulation, which gave the best evaluation with regard to the particle size (97.03±2.68) nm, polydispersity index (0.20±0.00), higher zeta potential (61.28±2.06) mv, morphological studies and highest drug entrapment efficiency (68.34±4.24)%. The prepared transferosome formulation was subjected to characterization by validated HP-TLC method consisting of N-Hexane: Tert- Iso-butyl-methyl ether in ratio (5:15) v/v. Linearity was performed in the range of 50-1500 ng/spot with LOD/LOQ 50 ng and 150 ng, with regression analysis (R) of 99.91%. Recovery analysis was performed at 3 different levels at 80, 100 and 120 with an average recovery of 106.97%, respectively. Till now, no analytical method has been reported, associated with the characterization of pharmaceutical nano-forms (Capsaicin), like transferosomes. Thus, the maiden validated HP-TLC method for concurrent analysis of capsaicin as API in nano-transferosome may be employed in process quality control of formulations containing the said API. Background: The irritability and adverse effects post application, leading to inflammation and neural pain at the site of administration of newly Capsaicin API and its chemical entities and marketed formulations are usually related to poor permeability, leading to drug complex reactions in the development phases or therapeutic failure along with the quantification of the same in blood plasma. However, advancement in drug formulations with the use of polymer: alcohol ratio and modernized analytical techniques for the quantification of Pharmaceutical APIs seems to be emerging and promising for overcoming pain and related inflammatory complications by formulating the APIs in Transferosome formulation with Validated HP-TLC technique being used as an effective economic and precise tool for quantitative analysis of APIs in their respective nano-forms. Objective: The study proposes a novel standardized method development and validation of pharmaceutical nanoforms with Capsaicin as API. Method: Capsaicin Transferosomes were formulated using Ultra probe sonication by utilizing different proportions of phospholipid 90G dissolved in a mixture of ethanol and propylene glycol. The formulation was subjected to Dynamic Light Scattering (DLS) technique for nano-particle analysis followed by characterization with respect to particle size, polydispersity index, zeta potential and entrapment efficiency. The morphological study of vesicles was determined using SEM and TEM. A Validated HP-TLC method for the identification and determination of Capsaicin in transferosomes formulation was performed as per the ICH guidelines. Results: The formulation gave the best evaluation for particle size (97.03±2.68) nm, polydispersity index (0.20±0.00), higher zeta potential (61.28±2.06) mv, morphological studies (SEM & TEM) and highest drug entrapment efficiency (68.34±4.24)%. DSC thermograms and FTIR spectral patterns confirmed no physical interaction by polymers with API. The prepared formulation was then characterized using HP-TLC method. The best resolution was found in NHexane: Tert-Isobutyl methyl ether in a ratio of 5:15 v/v. The Rf was found to be 0.3±0.03. Linearity was performed in a range of 50-1500 ng/spot, with regression analysis (R) of 99.91% Further, recovery analysis was done at 3 different levels as 80, 100 and 120 with an average recovery of 106.97%. The LOD/LOQ was found to be 50 and 150 ng, respectively. Precision was carried out in which % RSD was found to be precise and accurate. Conclusion: The outcomes of the present study suggested that the proposed novel formulation analyzed by Validated planar chromatographic technique (HP-TLC) for Capsaicin quantification in nanoforms may be employed as a routine quality control method for the said API in various other formulations.

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

scholarly journals Effect of Chitosan Coating on PLGA Nanoparticles for Oral Delivery of Thymoquinone: In Vitro, Ex Vivo, and Cancer Cell Line Assessments

Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 6
Author(s):  
Sultan Alshehri ◽  
Syed Sarim Imam ◽  
Md Rizwanullah ◽  
Khalid Umar Fakhri ◽  
Mohd Moshahid Alam Rizvi ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Cancer Cell Line ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Cancer Management ◽  
Mcf 7

In the present study, thymoquinone (TQ)-encapsulated chitosan- (CS)-coated poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) were formulated using the emulsion evaporation method. NPs were optimized by using 33-QbD approach for improved efficacy against breast cancer. The optimized thymoquinone loaded chitosan coated Poly (d,l-lactide-co-glycolide) nanoparticles (TQ-CS-PLGA-NPs) were successfully characterized by different in vitro and ex vivo experiments as well as evaluated for cytotoxicity in MDA-MB-231 and MCF-7 cell lines. The surface coating of PLGA-NPs was completed by CS coating and there were no significant changes in particle size and entrapment efficiency (EE) observed. The developed TQ-CS-PLGA-NPs showed particle size, polydispersibility index (PDI), and %EE in the range between 126.03–196.71 nm, 0.118–0.205, and 62.75%–92.17%. The high and prolonged TQ release rate was achieved from TQ-PLGA-NPs and TQ-CS-PLGA-NPs. The optimized TQ-CS-PLGA-NPs showed significantly higher mucoadhesion and intestinal permeation compared to uncoated TQ-PLGA-NPs and TQ suspension. Furthermore, TQ-CS-PLGA-NPs showed statistically enhanced antioxidant potential and cytotoxicity against MDA-MB-231 and MCF-7 cells compared to uncoated TQ-PLGA-NPs and pure TQ. On the basis of the above findings, it may be stated that chitosan-coated TQ-PLGA-NPs represent a great potential for breast cancer management.

Sign in / Sign up

Export Citation Format

Share Document