scholarly journals FORMULATION, OPTIMIZATION, AND IN VITRO EVALUATION OF POLYMERIC NANOSUSPENSION OF FLURBIPROFEN

2019 ◽  
pp. 183-191
Author(s):  
PANKAJ JADHAV ◽  
ADHIKRAO YADAV
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Transmission Electron

Objective: At present, more than 40% of drugs are poorly water-soluble that leads to reduced bioavailability. The objective of the present investigation was to overcome the issue of poor aqueous solubility of drug; therefore, stable flurbiprofen (FBF) nanosuspensions were developed by nanoprecipitation method. Materials and Methods: Based on particle size, zeta potential, and entrapment efficiency, the polymeric system of hydroxypropyl methylcellulose E15 and poloxamer 188 was used effectively. The prepared formulations were evaluated for Fourier transform infrared spectroscopy, transmission electron microscopy, differential scanning calorimetry, powder X-ray diffraction, saturation solubility, entrapment efficiency, particle size, zeta potential, dissolution profile, and stability. Results: The resultant FBF nanosuspensions depicted particles in size range of 200–400 nm and were physically stable. After nanonization, the crystallinity of FBF was slightly reduced in the presence of excipients. The aqueous solubility and dissolution rate of all FBF nanosuspensions were significantly increased as compared with FBF powder. Conclusion: This investigation demonstrated that nanoprecipitation is a promising method to develop stable polymeric nanosuspension of FBF with significant increase in its aqueous solubility.

scholarly journals Formulation and In Vitro Evaluation of Casein Nanoparticles as Carrier for Celecoxib

2020 ◽  
Vol 10 (3) ◽  
pp. 408-417
Author(s):  
Jyotsana R. Madan ◽  
Izharahemad N. Ansari ◽  
Kamal Dua ◽  
Rajendra Awasthi
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Water Soluble ◽  
Polydispersity Index ◽  
Drug Dissolution ◽  
Permeation Studies ◽  
Poorly Water Soluble

Purpose : The objective of this work was to formulate casein (CAS) nanocarriers for the dissolution enhancement of poorly water soluble drug celecoxib (CLXB). Methods: The CLXB loaded CAS nanocarriers viz., nanoparticles, reassembled CAS micelles and nanocapsules were prepared using sodium caseinate (SOD-CAS) as a carrier to enhance the solubility of CLXB. The prepared formulations were characterized for particle size, polydispersity index, zeta potential, percentage entrapment efficiency, and surface morphology for the selection of best formulation. Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction study was used to for the confirmation of encapsulation of CLXB. Further, in vitro drug dissolution, ex-vivo permeation studies on chicken ileum and stability studies were carried out. Results: The CLXB loaded casein nanoparticles (CNP) (batch A2) showed a particle size diameter 216.1 nm, polydispersity index 0.422 with percentage entrapment efficiency of 90.71% and zeta potential of -24.6 mV. Scanning electron microscopy of suspension confirmed globular shape of CNP. The in vitro release data of optimized batch followed non Fickian diffusion mechanism. The ex vivo permeation studies on chicken ileum of CLXB loaded CNP showed permeation through mucous membrane as compared to pure CLXB. The apparent permeability of best selected freeze dried CLXB loaded CNP (batch A2) was higher and gradually increased from 0.90 mg/cm2 after 10 min to a maximum of 1.95 mg/cm2 over the subsequent 90 min. A higher permeation was recorded at each time point than that of the pure CLXB. Conclusion: The study explored the potential of CAS as a carrier for solubility enhancement of poorly water soluble drugs.

scholarly journals Ezetimibe-Loaded Nanostructured Lipid Carrier Based Formulation Ameliorates Hyperlipidaemia in an Experimental Model of High Fat Diet

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1485
Author(s):  
Yogeeta O. Agrawal ◽  
Umesh B. Mahajan ◽  
Vinit V. Agnihotri ◽  
Mayur S. Nilange ◽  
Hitendra S. Mahajan ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
High Fat Diet ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Nanostructured Lipid Carrier ◽  
High Fat ◽  
Scanning Calorimetry ◽  
Bioavailability Enhancement

Ezetimibe (EZE) possesses low aqueous solubility and poor bioavailability and in addition, its extensive hepatic metabolism supports the notion of developing a novel carrier system for EZE. Ezetimibe was encapsulated into nanostructured lipid carriers (EZE-NLCs) via a high pressure homogenization technique (HPH). A three factor, two level (23) full factorial design was employed to study the effect of amount of poloxamer 188 (X1), pressure of HPH (X2) and number of HPH cycle (X3) on dependent variables. Particle size, polydispersity index (PDI), % entrapment efficiency (%EE), zeta potential, drug content and in-vitro drug release were evaluated. The optimized formulation displays pragmatic inferences associated with particle size of 134.5 nm; polydispersity index (PDI) of 0.244 ± 0.03; zeta potential of −28.1 ± 0.3 mV; % EE of 91.32 ± 1.8% and % CDR at 24-h of 97.11%. No interaction was observed after X-ray diffraction (XRD) and differential scanning calorimetry (DSC) studies. EZE-NLCs (6 mg/kg/day p.o.) were evaluated in the high fat diet fed rats induced hyperlipidemia in comparison with EZE (10 mg/kg/day p.o.). Triglyceride, HDL-c, LDL-c and cholesterol were significantly normalized and histopathological evaluation showed normal structure and architecture of the hepatocytes. The results demonstrated the superiority of EZE-NLCs in regard to bioavailability enhancement, dose reduction and dose-dependent side effects.

scholarly journals Preparation and Characterization of Chitosan Coated PLGA Nanoparticles of Resveratrol: Improved Stability, Antioxidant and Apoptotic Activities in H1299 Lung Cancer Cells

Coatings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 439 ◽  
Author(s):  
Hibah M. Aldawsari ◽  
Nabil A. Alhakamy ◽  
Rayees Padder ◽  
Mohammad Husain ◽  
Shadab Md
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Plga Nanoparticles ◽  
Steady Increase ◽  
Average Particle

Resveratrol (RES) is a polyphenolic compound which has shown beneficial pharmacological effects such as anti-inflammatory, antioxidant, and anti-cancer effects. However, poor aqueous solubility, bioavailability, and low stability are the major limitations to the clinical application of RES. Therefore, in the present study, chitosan (CS) coated PLGA nanoparticles of RES (CS-RES-PLGA NPs) was developed, characterized and its anticancer activity was evaluated in the H1299 lung carcinoma cell line. The effects of the increase in CS coating and cryoprotectant concentration on particle size, polydispersity index (PDI) and zeta potential (ZP) were determined. The particle size, PDI, ZP and entrapment efficiency of the optimized CS-RES-PLGA NPs were found to be 341.56 ± 7.90 nm, 0.117 ± 0.01, 26.88 ± 2.69 mV and 75.13% ± 1.02% respectively. The average particle size and ZP showed a steady increase with an increase in CS concentration. The increase in positive zeta potential is evident for higher CS concentrations. The effect of trehalose as cryoprotectant on average particle size was decreased significantly (p < 0.05) when it was increased from 1%−5% w/v. TEM and SEM showed uniform particle distribution with a smooth surface and spherical shape. The CS coating provides modulation of in vitro drug release and showed a sustained release pattern. The stability of RES loaded PLGA NPs was improved by CS coating. CS-coated NPs showed greater cytotoxicity and apoptotic activities compared to free RES. The CS coated NPs had a higher antioxidant effect than the free RES. Therefore, CS coated PLGA NPs could be a potential nanocarrier of RES to improve drug solubility, entrapment, sustain release, stability and therapeutic application.

IN VITRO EVALUATION OF LECTINIZED CISPLATIN BEARING LIPOSOMES SYSTEM

2020 ◽  
pp. 60-64
Author(s):  
RAHUL TIWARI ◽  
KALIYAPERUMAL VISWANATHAN ◽  
SURESH PRASAD VYAS ◽  
VANDANA SONI
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Wheat Germ Agglutinin ◽  
Wheat Germ ◽  
Entrapment Efficiency ◽  
Cancer Drug ◽  
Drug Molecules ◽  
Transmission Electron ◽  
Surface Modified

Objective: The purpose of this study was to evaluate the extent and mechanism anti-cancer drug-loaded liposomes using wheat germ agglutinin as a guiding molecule. Methods: For the drug-loaded liposome synthesis, the thin film hydration method was used and the drug cisplatin was loaded during the synthesis and followed by the surface modification using wheat germ agglutinin (WGA) lectin. The developed system was confirmed based on transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size (PS) analyzer, polydispersity index and Zeta Potential analyzer. Results: The results showed the surface modified by liposomes had the particle size 200±5 nm. The wheat germ agglutinin coated on the surface to liposome led to a reduction in zeta potential and drug entrapment efficiency while particle size increased. Plain liposomes containing cisplatin had less effect than WGA modified liposome on MCF-7 cell lines. Conclusion: The MTT studies indicated that the drug molecules were initially get delivered to the inside the cell. This formulation offered new simple approach and effectively kill the cells via targeting the nucleus.

Formulation, Characterization and In-vitro and In-vivo Evaluation of Capecitabine Loaded Niosomes

2020 ◽  
Vol 17 (3) ◽  
pp. 257-268
Author(s):  
Parth Patel ◽  
Tejas Barot ◽  
Pratik Kulkarni
Keyword(s):  
Particle Size ◽  
Entrapment Efficiency ◽  
Particle Size Analysis ◽  
Multi Drug Resistance ◽  
Size Analysis ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation ◽  
Transmission Electron

Background: Nanocarriers improve the efficacy of drugs by facilitating their specific delivery and protecting them from external environment resulting in a better performance against diseases. Objective: In this study, it was aimed to improve the efficacy of capecitabine against colorectal cancer by its entrapment in niosomes. Ether injection method was used to prepare niosomes composed of span 20 and cholesterol. Methods: Niosomes were evaluated by evaluating the entrapment efficiency, in-vitro drug release and cytotoxicity of capecitabine loaded niosomes. Niosomes were characterized by particle size analysis, transmission electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry for surface morphology and drug excipient interactions. Results: High encapsulation efficiency (90.55%) was observed, which is anticipated to resolve the multi-drug resistance problem. Reported particle size was 180.9 + 5 nm with a negative zeta potential - 21 + 0.5 mV and the kinetic study showed a concentration-dependent release of the drug from the niosome. DSC study proved entrapment of the entire drug and its non-covalent bonding with the excipients. Cytotoxicity study of niosomes on CaCO2 cell line showed an improved IC>50 value as compared to the free drug. Conclusion: Enhanced cytotoxicity observed in the results further supports the suitability of niosome as a nanocarrier for pharmaceutical drug delivery.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

scholarly journals Plumbagin-Loaded Glycerosome Gel as Topical Delivery System for Skin Cancer Therapy

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 923
Author(s):  
Shadab Md ◽  
Nabil A. Alhakamy ◽  
Hibah M. Aldawsari ◽  
Mohammad Husain ◽  
Nazia Khan ◽  
...  
Keyword(s):  
Skin Cancer ◽  
Zeta Potential ◽  
Skin Permeation ◽  
Entrapment Efficiency ◽  
Aqueous Solubility ◽  
Skin Layer ◽  
Vesicle Size ◽  
Cytotoxicity Activities

Plumbagin (PLM) is a phytochemical which has shown cytotoxicity against of cancer cells both in vitro and in vivo. However, the clinical application of PLM has been hindered due to poor aqueous solubility and low bioavailability. The aim of the present study was to develop, optimize and evaluate PLM-loaded glycerosome (GM) gel and compare with conventional liposome (CL) for therapeutic efficacy against skin cancer. The GM formulations were optimized by employing design expert software by 3-level 3-factor design. The prepared GMs were characterized in vitro for vesicle size, size distribution, zeta potential, vesicle deformability, drug release, skin permeation, retention, texture, antioxidant and cytotoxicity activities. The optimized formulation showed a vesicle size of 119.20 ± 15.67 nm with a polydispersity index (PDI) of 0.145 ± 0.02, the zeta potential of −27 ± 5.12 mV and entrapment efficiency of 76.42 ± 9.98%. The optimized PLM-loaded GM formulation was transformed into a pre-formed gel which was prepared using Carbopol 934 polymer. The drug diffusion fluxes of CL gel and GM-loaded gel were 23.31 ±6.0 and 79.43 ± 12.43 µg/ cm2/h, respectively. The result of texture analysis revealed the adequate hardness, cohesiveness, consistency, and viscosity of the developed GM-loaded gel compared to CL gel. The confocal images showed that glycerosomal gel has deeper skin layer penetration as compared to the control solution. GM-loaded gel treated rat skin showed significantly (p < 0.05) higher drug accumulation in the dermis, higher cytotoxicity and higher antioxidant activity as compared to CL gel and PLM suspension. Thus, findings revealed that novel GM-loaded gel could be potential carriers for therapeutic intervention in skin cancer.

Formulation and Evaluation of Benidipine Nanosuspension

2021 ◽  
pp. 4111-4116
Author(s):  
Sejal Patel ◽  
Anita P. Patel
Keyword(s):  
Particle Size ◽  
Water Solubility ◽  
Polymer Concentration ◽  
Oral Route ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
23 Factorial Design ◽  
Selection Of

In the interest of administration of dosage form oral route is most desirable and preferred method. After oral administration to get maximum therapeutic effect, major challenge is their water solubility. Water insoluble drug indicate insufficient bioavailability as well dissolution resulting in fluctuating plasma level. Benidipine (BND) is poorly water soluble antihypertensive drug has lower bioavailability. To improve bioavailability of Benidipine HCL, BND nanosuspension was formulated using media milling technique. HPMC E5 was used to stabilize nanosuspension. The effect of different important process parameters e.g. selection of polymer concentration X1(1.25 mg), stirring time X2 (800 rpm), selection of zirconium beads size X3 (0.4mm) were investigated by 23 factorial design to accomplish desired particle size and saturation solubility. The optimized batch had 408 nm particle size Y1, and showed in-vitro dissolution Y2 95±0.26 % in 30 mins and Zeta potential was -19.6. Differential scanning calorimetry (DSC) and FT-IR analysis was done to confirm there was no interaction between drug and polymer.

Mannosylated Solid Lipid Nanocarriers Of Chrysin To Target Gastric Cancer: Optimization and Cell line Study.

2021 ◽  
Vol 18 ◽  
Author(s):  
Sonia S. Pandey ◽  
Farhinbanu I. Shaikh ◽  
Arti R. Gupta ◽  
Rutvi J. Vaidya
Keyword(s):  
Gastric Cancer ◽  
Particle Size ◽  
Ex Vivo ◽  
Biological Effects ◽  
Entrapment Efficiency ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Lipid Nanocarriers

Background: Despite significant biological effects, the clinical use of chrysin has been restricted because of its poor oral bioavailability. Objective: The purpose of the present research was to investigate the targeting potential of Mannose decorated chrysin (5,7- dihydroxyflavone) loaded solid lipid nanocarrier (MC-SLNs) for gastric cancer. Methods: The Chrysin loaded SLNs (C-SLNs) were developed optimized, characterized and further mannosylated. The C-SLNs were developed with high shear homogenizer, optimized with 32 full factorial designs and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) and evaluated for particle size/polydispersity index, zeta-potential, entrapment efficiency, % release and haemolytic toxicity. The ex-vivo cytotoxicity study was performed on gastric cancer (ACG) and normal cell lines. Results: DSC and XRD data predict the chrysin encapsulation in lipid core and FTIR results confirm the mannosylation of C-SLNs. The optimized C-SLNs exhibited a narrow size distribution with a particle size of 285.65 nm. The % Entrapment Efficiency (%EE) and % controlled release were found to be 74.43% and 64.83%. Once C-SLNs were coated with mannose, profound change was observed in dependent variable - increase in the particle size of MC-SLNs (307.1 nm) was observed with 62.87% release and 70.8% entrapment efficiency. Further, the in vitro studies depicted MC- SLNs to be least hemolytic than pure chrysin and C-SLNs. MC-SLNs were most cytotoxic and were preferably taken up ACG tumor cells as evaluated against C-SLNs. Conclusion: These data suggested that the MC-SLNs demonstrated better biocompatibility and targeting efficiency to treat the gastric cancer.

scholarly journals FORMULATION AND EVALUATION OF PERINDOPRIL MICROENCAPSULES BY USING DIFFERENT POLYMER

2017 ◽  
Vol 10 (2) ◽  
pp. 153
Author(s):  
Leena Jacob ◽  
Abhilash Tv ◽  
Shajan Abraham
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Release Rate ◽  
Oral Drug Delivery ◽  
Entrapment Efficiency ◽  
Water Soluble ◽  
Oral Drug ◽  
Percentage Yield ◽  
Drug Entrapment Efficiency

Objective: The study was carried out with an objective to achieve a potential sustained release oral drug delivery system of an antihypertensive drug, Perindopril which is a ACE inhibitor having half life of 2 hours. Perindopril is water soluble drug, so we can control or delay the release rate of drug by using release retarding polymers. This may also decrease the toxic side effects by preventing the high initial concentration in the blood.Method: Microcapsules were prepared by solvent evaporation technique using Eudragit L100 and Ethyl cellulose as a retarding agent to control the release rate and magnesium stearate as an inert dispersing carrier to decrease the interfacial tension between lipophilic and hydrophilic phase. Results: Prepared microcapsules were evaluated for the particle size, percentage yield, drug entrapment efficiency, flow property and in vitro drug release for 12 h. Results indicated that the percentage yield, mean particle size, drug entrapment efficiency and the micrometric properties of the microcapsules was influenced by various drug: polymer ratio. The release rate of microcapsules could be controlled as desired by adjusting the combination ratio of dispersing agents to retarding agents.Conclusion:Perindopril microcapsules can be successfully designed to develop sustained drug delivery, that reduces the dosing frequency and their by one can increase the patient compliance.

Sign in / Sign up

Export Citation Format

Share Document