scholarly journals Penggunaan Bahan Restorasi di Rumah Sakit Gigi dan Mulut Fakultas Kedokteran Gigi Universitas Prof. Dr. Moestopo (Beragama)/RSGM FKG UPDM (B) pada Tahun 2014-2016

e-GIGI ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 317
Author(s):  
Sari Dewiyani ◽  
Ika Puspitasari
Keyword(s):  
Dental Caries ◽  
Random Sampling ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Sampling Technique ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Amalgam Restoration ◽  
Organic Tissue ◽  
Ionomer Cement

Abstract: Dental caries results in destruction of hard structure of teeth that causes demineralization of calcified tissue associated with destruction of organic tissue due to microorganisms and fermented carbohydrates. Dental caries can be treated with tooth resroration. There are different types of materials for dental restorations, as follows: amalgam, composite resins, and glass ionomer cement (GIC). This study was aimed to obtain the usage of restoration materials at Rumah Sakit Gigi dan Mulut Fakultas Kedokteran Gigi Universitas Prof. Dr. Moestopo (Beragama) [RSGM FKG UPDM (B)] Jakarta from 2014 to 2016. This was a descriptive and retrospective study. Samples were obtained by using random sampling technique. There were 1322 cases categorized based on age, sex, and location of restoration. Amalgam restoration was the most common in patients aged 17-25 years and in females. Most teeth at posterior region were treated with amalgam restoration (72%). In conclusion, the most common cases were amalgam restoration, aged 17-25 years, female, and posterior location of restoration.Keywords: resin composite; glass ionomer cement (GIC); amalgam; dental caries Abstrak: Karies gigi adalah suatu penyakit infeksi yang merusak struktur keras gigi sehingga menyebabkan demineralisasi jaringan terkalsifikasi, disertai kerusakan jaringan organiknya yang disebabkan oleh aksi mikroorganisme dan karbohidrat yang dapat di fermentasi. Salah satu cara penanganan karies gigi ialah dengan cara merestorasi gigi menggunakan bahan restorasi gigi. Bahan restorasi yang sering digunakan saat ini ialah amalgam, resin komposit, dan glass ionomer cement (GIC). Penelitian ini bertujuan untuk mengetahui distribusi frekuensi penggunaan bahan restorasi di Rumah Sakit Gigi dan Mulut Fakultas Kedokteran Gigi Universitas Prof. Dr. Moestopo (Beragama)/RSGM FKG UPDM (B) Jakarta pada tahun 2014-2016. Jenis penelitian ialah deskriptif dengan pendekatan retrospektif. Pengambilan sampel menggunakan teknik random sampling. Hasil penelitian mendapatkan 1322 kasus yang dikategorikan berdasarkan usia, jenis kelamin, dan lokasi restorasi. Perawatan dengan amalgam lebih sering dilakukan oleh pasien yang berusia 17-25 tahun dan berjenis kelamin perempuan. Regio posterior merupakan regio gigi yang paling banyak mendapatkan restorasi dengan amalgam. Simpulan penelitian ini ialah penggunaan bahan restorasi terbanyak ialah restorasi amalgam dengan kelompok usia terbanyak 17-25 tahun, jenis kelamin perempuan, dan lokasi restorasi pada posterior (72%).Kata kunci: resin komposit; glass ionomer cement (GIC); amalgam; karies gigi

Impact of the Porosity from Incremental and Bulk Resin Composite Filling Techniques on the Biomechanical Performance of Root-Treated Molars

2021 ◽  
Author(s):  
RAS Pereira ◽  
PBF Soares ◽  
AA Bicalho ◽  
LM Barcelos ◽  
LRS Oliveira ◽  
...  
Keyword(s):  
Fracture Mode ◽  
Fracture Resistance ◽  
Composite Resin ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
High Viscosity ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Pulp Chamber ◽  
Ionomer Cement

SUMMARY Objectives: To analyze the effect of the porosity caused by incremental and bulk resin composite filling techniques using low- and high-viscosity composite resins on the biomechanical performance of root-treated molars. Methods: Forty intact molars received standardized mesio-occlusal-distal (MOD) cavity preparation, were root treated, and randomly divided into four groups with different filling techniques (n=10). The first involved two incremental filling techniques using VIT/Z350XT, a nanofilled composite resin (Filtek Z350XT, 3M ESPE) associated with a resinmodified glass ionomer cement, and resin-modified glass ionomer cement (RMGIC; Vitremer, 3M ESPE) for filling the pulp chamber. The second involved TPH/VIT, a microhybrid composite resin TPH3 Spectrum associated with Vitremer. The third and fourth involved two bulk-fill composite resins: SDR/TPH, a low-viscosity resin composite (Surefill SDR flow, Dentsply) associated with TPH3 Spectrum, and POST, a high-viscosity bulkfill resin composite (Filtek Bulk Fill Posterior, 3M ESPE). The volume of the porosity inside the restoration was calculated by micro-CT. The cusp deformation caused by polymerization shrinkage was calculated using the strain-gauge and micro-CT methods. The cusp deformation was also calculated during 100 N occlusal loading and loading to fracture. The fracture resistance and fracture mode were recorded. Data were analyzed by one-way analysis of variance and Tukey test. The fracture mode was analyzed by the χ2 test. The volume of the porosity was correlated with the cusp deformation, fracture resistance, and fracture mode (α=0.05). Results: Incremental filling techniques associated with RMGIC resulted in a significantly higher porosity than that of both bulk-fill techniques. However, no significant difference was found among the groups for the fracture resistance, fracture mode, and cusp deformation, regardless of the measurement time and method used. No correlation was observed between the volume of the porosity and all tested parameters. Conclusions: The porosity of the restorations had no influence on the cuspal deformation, fracture resistance, or fracture mode. The use of the RMGIC for filling the pulp chamber associated with incremental composite resins resulted in similar biomechanical performance to that of the flowable or regular paste bulk-fill composite resin restorations of root-treated molars.

scholarly journals Effects of ionizing radiation on surface properties of current restorative dental materials

2021 ◽  
Vol 32 (6) ◽  
Author(s):  
Débora Michelle Gonçalves de Amorim ◽  
Aretha Heitor Veríssimo ◽  
Anne Kaline Claudino Ribeiro ◽  
Rodrigo Othávio de Assunção e Souza ◽  
Isauremi Vieira de Assunção ◽  
...  
Keyword(s):  
Ionizing Radiation ◽  
Surface Properties ◽  
Resin Composite ◽  
Dental Materials ◽  
Glass Ionomer Cement ◽  
Contact Angles ◽  
Glass Ionomer ◽  
Post Radiation ◽  
Restorative Dental Materials ◽  
Ionomer Cement

AbstractTo investigate the impact of radiotherapy on surface properties of restorative dental materials. A conventional resin composite—CRC (Aura Enamel), a bulk-fill resin composite—BFRC (Aura Bulk-fill), a conventional glass ionomer cement—CGIC (Riva self cure), and a resin-modified glass ionomer cement—RMGIC (Riva light cure) were tested. Forty disc-shaped samples from each material (8 mm diameter × 2 mm thickness) (n = 10) were produced according to manufacturer directions and then stored in water distilled for 24 h. Surface wettability (water contact angle), Vickers microhardness, and micromorphology through scanning electron microscopy (SEM) before and after exposition to ionizing radiation (60 Gy) were obtained. The data were statistically evaluated using the two-way ANOVA and Tukey posthoc test (p < 0.05). Baseline and post-radiation values of contact angles were statistically similar for CRC, BFRC, and RMGIC, whilst post-radiation values of contact angles were statistically lower than baseline ones for CGIC. Exposition to ionizing radiation statistically increased the microhardness of CRC, and statistically decreased the microhardness of CGIC. The surface micromorphology of all materials was changed post-radiation. Exposure to ionizing radiation negatively affected the conventional glass ionomer tested, while did not alter or improved surface properties testing of the resin composites and the resin-modified glass ionomer cement tested.

scholarly journals To Evaluate Shear Bond Strength of Resin Composite to Theracal Lc, Biodentine, and Resin–Modified Glass Ionomer Cement and Mode of Fracture: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 49-54
Author(s):  
Salil Mehra ◽  
Ashu K. Gupta ◽  
Bhanu Pratap Singh ◽  
Mandeep Kaur ◽  
Ashwath Kumar
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Bonding Agent ◽  
Glass Ionomer ◽  
Universal Adhesive ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Abstract Introduction The aim of the current study was to evaluate shear bond strength of resin composite bonded to Theracal LC, Biodentine, and resin-modified glass ionomer cement (RMGIC) using universal adhesive and mode of fracture. Materials and Methods A total of 50 caries-free maxillary and mandibular molars extracted were taken; occlusal cavities were prepared, mounted in acrylic blocks, and divided into five groups based on the liner used. Group 1: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 12 minutes. Group 2: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 14 days. Group 3: RMGIC liner placed into the cavity and bonding agent and resin composite applied immediately. Group 4: RMGIC liner placed into the cavity and bonding agent and resin composite applied after 7 days. Group 5: Theracal LC liner placed into the cavity and bonding agent and resin composite applied immediately. Each sample was bonded to resin composite using universal adhesive. Shear bond strength analysis was performed at a cross-head speed of 0.1 mm/min. Statistical Analysis  Statistical analysis was performed with one-way analysis of variance and posthoc Bonferroni test using SPSS version 22.0. Results and Conclusion Biodentine liner when bonded immediately to resin composite showed minimum shear bond strength. RMGIC when bonded to resin composite after 7 days showed maximum shear bond strength. Mode of fracture was predominantly cohesive in groups having Biodentine and Theracal LC as liner.

scholarly journals Advances in glass-ionomer cements

2006 ◽  
Vol 14 (spe) ◽  
pp. 3-9 ◽  
Author(s):  
Carel Leon Davidson
Keyword(s):  
Glass Ionomer Cement ◽  
Minimal Invasive ◽  
Composite Resins ◽  
Restorative Material ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Tooth Structure ◽  
Ionomer Cement

This article describes the properties, advances and shortcomings of glass-ionomer cement as a restorative material. The adhesion of glass-ionomer to tooth structure is less technique sensitive than composite resins and its quality increases with time. Therefore glass-ionomer might turn out to the more reliable restorative material in minimal invasive dentistry based on adhesive techniques.

scholarly journals In vitro quantitative evaluation of marginal microleakage in class II restorations confected with a glass ionomer cement and two composite resins

2001 ◽  
Vol 15 (4) ◽  
pp. 277-282 ◽  
Author(s):  
Maria Fernanda Borro BIJELLA ◽  
Maria Francisca Thereza Borro BIJELLA ◽  
Salete Moura Bonifácio da SILVA
Keyword(s):  
Glass Ionomer Cement ◽  
Class Ii ◽  
Deionized Water ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Dye Penetration ◽  
Significant Difference ◽  
Distal Direction ◽  
Ionomer Cement

This study evaluated, in vitro, marginal microleakage in class II restorations confected with the glass ionomer cement Vitremer and with the composite resins Ariston pHc and P-60. The aims of the study were to assess the effect of thermocycling on those materials and to evaluate two methods utilized in the analysis of dye penetration. Sixty premolars divided in three groups were utilized; the teeth had proximal cavities whose cervical walls were located 1 mm below the cementoenamel junction. Half of the test specimens from each group underwent thermocycling; the other half remained in deionized water, at 37ºC. The specimens were immersed, for 24 hours, in a basic 0.5% fuchsin solution at 37ºC. For the analysis of microleakage, the specimens were sectioned in a mesio-distal direction, and the observation was carried out with the software Imagetools. The results were evaluated through the 2-way ANOVA and through the Tukey’s test. All groups presented marginal microleakage. The smallest values were obtained with Vitremer, followed by those obtained with the composite resins P-60 and Ariston pHc. There was no statistically significant difference caused by thermocycling, and the method of maximum infiltration was the best for detecting the extension of microleakage.

scholarly journals Marginal Leakage of Endodontic Temporary Restorative Materials around Access Cavities Prepared with Pre-Endodontic Composite Build-Up: An In Vitro Study

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1700
Author(s):  
Atsushi Kameyama ◽  
Aoi Saito ◽  
Akiko Haruyama ◽  
Tomoaki Komada ◽  
Setsuko Sugiyama ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Restorative Material ◽  
Glass Ionomer ◽  
Zinc Oxide Eugenol ◽  
Restorative Materials ◽  
Ionomer Cement

This study aimed to examine the marginal seal between various commercial temporary restorative materials and exposed dentin/built-up composite. Sixty bovine incisors were cut above the cemento-enamel junction, and half of the dentin was removed to form a step, which was built up using flowable resin composite. The root canals were irrigated, filled with calcium hydroxide, and sealed using one of six temporary sealing materials (hydraulic temporary restorative material, temporary stopping material, zinc oxide eugenol cement, glass-ionomer cement, auto-cured resin-based temporary restorative material, and light-cured resin-based temporary restorative material) (n = 10 for each material). The samples were thermocycled 500 times and immersed in an aqueous solution of methylene blue. After 2 days, they were cut along the long axis of the tooth and the depth of dye penetration was measured at the dentin side and the built-up composite side. For the margins of the pre-endodontic resin composite build-up, the two resin-based temporary restorative materials showed excellent sealing. Hydraulic temporary restorative material had a moderate sealing effect, but the sealing effect of both zinc oxide eugenol cement and glass-ionomer cement was poorer.

Biocompatibility of a Conventional Glass Ionomer, Ceramic Reinforced Glass Ionomer, Giomer and Resin Composite to Fibroblasts: In vitro Study

2013 ◽  
Vol 37 (4) ◽  
pp. 403-406 ◽  
Author(s):  
S Tamilselvam ◽  
MJ Divyanand ◽  
P Neelakantan
Keyword(s):  
Cell Viability ◽  
Mtt Assay ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Glass Ionomer ◽  
Time Periods ◽  
The Impact ◽  
Ionomer Cement

Objective: This aim of this study was at compare the fibroblast cytotoxicicty of four restorative materials - a conventional glass ionomer cement (GC Fuji Type II GIC), a ceramic reinforced glass ionomer cement (Amalgomer), a giomer (Beautifil II) and a resin composite (Filtek Z350) at three different time periods (24, 48 and 72 hours). Method: The succinyl dehydrogenase (MTT) assay was employed. Cylindrical specimens of each material (n=15) were prepared and stored in Dulbecco's modified Eagle medium, following which L929 fibroblasts were cultured in 96 well plates. After 24 hours of incubation, the MTT assay was performed to detect the cell viability. The method was repeated after 48 and 72 hours. The impact of materials and exposure times on cytotoxicity of fibroblasts was statistically analyzed using two way ANOVA (P=0.05). Results: Both time and material had an impact on cell viability, with giomer demonstrating the maximum cell viability at all time periods. The cell viability in the giomer group was significantly different from all other materials at 24 and 72 hours (P&lt;0.05), while at 48 hours giomer was significantly different only with resin composite (P&lt;0.05). Conclusions: Giomers showed better biocompatibility than conventional and ceramic reinforced glass ionomer cements and, resin composite. Ceramic reinforced glass ionomer demonstrated superior biocompatibility compared to conventional glass ionomer.

scholarly journals Fluoride-Releasing Dental Restorative Materials: An Update

2014 ◽  
Vol 18 (2) ◽  
pp. 60-69 ◽  
Author(s):  
John W. Nicholson
Keyword(s):  
Glass Ionomer Cement ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Acid Attack ◽  
Dental Cement ◽  
Dental Restoratives ◽  
Resin Modified Glass Ionomer ◽  
Dental Restorative ◽  
Natural Tooth ◽  
Ionomer Cement

SUMMARYThe fluoride ion has a well-established beneficial role in dentistry in protecting the teeth from assault by caries. It is known to contribute to the dynamic mineralisation process of the natural tooth mineral, and also to become incorporated with the mineral phase, forming a thin layer of fluorapatite. This is more resistant to acid attack than the native hydroxyapatite, hence protects the tooth against further decay. Other recently discovered aspects of the role and uptake of fluoride will also be discussed.One of the widely used dental restoratives, the glass-ionomer dental cement, is able to release fluoride in a sustained manner that may continue for many years, and this is seen as clinically beneficial. The closely related resin-modified glass-ionomer cement, and also the polyacid-modified composite resin (“compomer”) are able to do the same. There are also fluoride-containing conventional composite resins able to release fluoride.These various materials are reviewed and the way in which they release fluoride are described, as well as the effectiveness of the release at the levels involved. Studies of effectiveness of fluoride release from these various classes of material are reviewed, and shown to suggest that release from conventional and resin-modified glass-ionomers is more beneficial than from composite resins. This is attributed to 2 causes: firstly, that it is not possible to replace the lost fluoride in composites, unlike glass-ionomers, and secondly because the other ions released from glass-ionomers (calcium, phosphate) are able to contribute to local remineralisation of the tooth. The absence of these other ions in fluoridated composites means that remineralisation is able to occur to a lesser extent, if at all.

Sign in / Sign up

Export Citation Format

Share Document