scholarly journals Automated Tilt Conveyor for Cylinder Head

2019 ◽  
Vol 9 (2) ◽  
pp. 5314-5317
Keyword(s):  
Cylinder Head ◽  
Low Cost ◽  
Research Work ◽  
Vertical Position ◽  
Horizontal Position ◽  
Valve Seat ◽  
Automobile Engine ◽  
Operator Fatigue ◽  
Main Components ◽  
Made In

Cylinder head is one of the main components of an Automobile Engine. In machine shop there are three bays having a machines in which the cylinder head is machined. Makino machine is one of them where the operations like roughing, semi finish; drilling and tapping are carried out. The component has to be loaded by use of a manipulator in a vertical position into the machine such that its rocker face should be facing the operator. So, the component coming from the previous operation through a conveyor with combustion face on top should be tilted to 90 degree such that its rocker face will be facing the operator in a horizontal position. This tilting process has been carried out manually which results in damage of valve guide and valve seat of a cylinder head. This leads to reduction in quality and productivity and also it results in increased operator fatigue since the cylinder head weighs heavy. There is also a chance that when tilting the component manually the component may fall down and hurts operator which results in increased value of effort and ergonomic index. To overcome this problem our research work a modification is made in the conveyor of the makino machine with a low cost automatic arrangement provided for cylinder head tilting purpose

Electrochemical DNA biosensors: a review

Sensor Review ◽  
2019 ◽  
Vol 39 (1) ◽  
pp. 34-50 ◽  
Author(s):  
Bushra Rafique ◽  
Mudassir Iqbal ◽  
Tahir Mehmood ◽  
Muhammad Ashraf Shaheen
Keyword(s):  
Low Cost ◽  
Research Work ◽  
Dna Biosensors ◽  
Nanoscale Material ◽  
Sequence Detection ◽  
Solid Electrode ◽  
Content Type ◽  
Dna Sequence Detection ◽  
And Function ◽  
Made In

Purpose This review aims to focus on recent reported research work on the construction and function of different electrochemical DNA biosensors. It also describes different sensing materials, chemistries of immobilization probes, conditions of hybridization and principles of transducing and amplification strategies. Design/methodology/approach The human disease-related mutated genes or DNA sequence detection at low cost can be verified by the electrochemical-based biosensor. A range of different chemistries is used by the DNA-based electrochemical biosensors, out of which the interactions of nanoscale material with recognition layer and a solid electrode surface are most interesting. A diversity of advancements has been made in the field of electrochemical detection. Findings Some important aspects are also highlighted in this review, which can contribute in the creation of successful biosensing devices in the future. Originality/value This paper provides an updated review of construction and sensing technologies in the field of biosensing.

scholarly journals Determination of Environmental Factors for the Implementation of the Exploitability Index in Industrial Aggregate Mining Using Multi-Criteria Analysis

2021 ◽  
Vol 10 (4) ◽  
pp. 196
Author(s):  
Julio Manuel de Luis-Ruiz ◽  
Benito Ramiro Salas-Menocal ◽  
Gema Fernández-Maroto ◽  
Rubén Pérez-Álvarez ◽  
Raúl Pereda-García
Keyword(s):  
Environmental Factors ◽  
Environmental Factor ◽  
Human Life ◽  
Accurate Estimation ◽  
Analytic Hierarchy ◽  
Main Components ◽  
Hierarchy Process ◽  
Made In

The quality of human life is linked to the exploitation of mining resources. The Exploitability Index (EI) assesses the actual possibilities to enable a mine according to several factors. The environment is one of the most constraining ones, but its analysis is made in a shallow way. This research is focused on its determination, according to a new preliminary methodology that sets the main components of the environmental impact related to the development of an exploitation of industrial minerals and its weighting according to the Analytic Hierarchy Process (AHP). It is applied to the case of the ophitic outcrops in Cantabria (Spain). Twelve components are proposed and weighted with the AHP and an algorithm that allows for assigning a normalized value for the environmental factor to each deposit. Geographic Information Systems (GISs) are applied, allowing us to map a large number of components of the environmental factors. This provides a much more accurate estimation of the environmental factor, with respect to reality, and improves the traditional methodology in a substantial way. It can be established as a methodology for mining spaces planning, but it is suitable for other contexts, and it raises developing the environmental analysis before selecting the outcrop to be exploited.

scholarly journals Bimetallic Ni-Based Catalysts for CO2 Methanation: A Review

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Anastasios I. Tsiotsias ◽  
Nikolaos D. Charisiou ◽  
Ioannis V. Yentekakis ◽  
Maria A. Goula
Keyword(s):  
Low Temperature ◽  
Noble Metals ◽  
Recent Progress ◽  
Low Cost ◽  
Alloy Formation ◽  
Co2 Methanation ◽  
High Performing ◽  
Mobile Sources ◽  
Low Dispersion ◽  
Made In

CO2 methanation has recently emerged as a process that targets the reduction in anthropogenic CO2 emissions, via the conversion of CO2 captured from point and mobile sources, as well as H2 produced from renewables into CH4. Ni, among the early transition metals, as well as Ru and Rh, among the noble metals, have been known to be among the most active methanation catalysts, with Ni being favoured due to its low cost and high natural abundance. However, insufficient low-temperature activity, low dispersion and reducibility, as well as nanoparticle sintering are some of the main drawbacks when using Ni-based catalysts. Such problems can be partly overcome via the introduction of a second transition metal (e.g., Fe, Co) or a noble metal (e.g., Ru, Rh, Pt, Pd and Re) in Ni-based catalysts. Through Ni-M alloy formation, or the intricate synergy between two adjacent metallic phases, new high-performing and low-cost methanation catalysts can be obtained. This review summarizes and critically discusses recent progress made in the field of bimetallic Ni-M (M = Fe, Co, Cu, Ru, Rh, Pt, Pd, Re)-based catalyst development for the CO2 methanation reaction.

scholarly journals Study of the industrial contaminations containing hydrocarbon components and their effect on correlation of protective properties of textiles for clothes

2018 ◽  
Vol 226 ◽  
pp. 02027
Author(s):  
Irina Cherunova ◽  
Elena Yakovleva ◽  
Ekaterina Stefanova
Keyword(s):  
Ministry Of Education ◽  
State Technical ◽  
Potential Influence ◽  
Saturated Hydrocarbons ◽  
Protective Properties ◽  
Textile Materials ◽  
Wet Processing ◽  
Main Components ◽  
High Level ◽  
Made In

The article represents trends and results of world investigations for safety of textile materials for humans and environment. The algorithm for identification of potential influence vector of chemical emissions from textile and the environmentally aimed methods based on the alternative chemical substances for textile wet processing were presented. Using the procedure for oleophobic effect determination, the oil resistance levels of a number of modern fabrics for clothes were established. The experimental research results of the oil products concentration in the textile materials after chemical treatment based on the method of the capillary gas chromatography were presented. It was found out that hydrocarbons from C14H30 Tetradecane to С36Н74 Hexatriacontane are the main components with high level of contaminants concentration. The average values of hydrocarbon concentration on the cleaned up samples for the main areas of the clothe surface were determined. Accumulation of residual contaminations, based on saturated hydrocarbons (С17Н36 – С25Н52 block) and related special-purpose clothes areas, was identified. Recommendations for target-oriented correlation of the clothes protective properties were proposed. UWO (unified work order). The research was made in Don State Technical University within the framework of State Assignment of the Ministry of education and science of Russia under the project 11.9194.2017/BCh.

InSb Czochralski Growth Single Crystals for InGaSb Substrates

2014 ◽  
Vol 1616 ◽  
Author(s):  
J. E. Flores Mena ◽  
R. Castillo Ojeda ◽  
J. Díaz Reyes
Keyword(s):  
Low Cost ◽  
Electronic Devices ◽  
Czochralski Method ◽  
Liquid Nitrogen Temperature ◽  
Longitudinal Optical ◽  
Czochralski Growth ◽  
Etch Pit ◽  
Growth System ◽  
Radiation Sensors ◽  
Made In

ABSTRACTThe massive crystal growth of single crystal semiconductors materials has been of fundamental importance for the actual electronic devices industry. As a consequence of this one, we can obtain easily a large variety of low cost devices almost as made ones of silicon. Nowadays, the III-V semiconductors compounds and their alloys have been proved to be very important because of their optical properties and applications. It is the case of the elements In, Ga, As, Sb, which can be utilized for the fabrication of radiation sensors. In this work we present the results obtained from the ingots grown by the Czochralski method, using a growth system made in home. These results include anisotropic chemical attacks in order to reveal the crystallographic orientation and the possible polycrystallinity. Isotropic chemical attacks were made to evaluate the etch pit density. Metallographic pictures of the chemical attacks are presented in this work. Among the results of these measurements, the best samples presented in this work showed mobilities of 62.000 cm2/V*s at room temperature and 99.000 cm2/V*s at liquid nitrogen temperature. Typical pit density was 10,000/cm2. The Raman spectra present two dominant peaks associated at Transversal Optical (TO)- and Longitudinal Optical (LO)-InSb, the first vibrational mode is dominant due to the crystalline direction of the ingots and second one is associated to high defects density.

Peripheral representation of antennal orientation by the scapal hair plate of the cockroach Periplaneta americana

2001 ◽  
Vol 204 (24) ◽  
pp. 4301-4309 ◽  
Author(s):  
J. Okada ◽  
Y. Toh
Keyword(s):  
Single Unit ◽  
Periplaneta Americana ◽  
Vertical Component ◽  
Horizontal Component ◽  
Vertical Position ◽  
Horizontal Position ◽  
Joint Movement ◽  
Basal Segment ◽  
Dynamic Phase ◽  
Hair Sensilla

SUMMARY Arthropods have hair plates that are clusters of mechanosensitive hairs, usually positioned close to joints, which function as proprioceptors for joint movement. We investigated how angular movements of the antenna of the cockroach (Periplaneta americana) are coded by antennal hair plates. A particular hair plate on the basal segment of the antenna, the scapal hair plate, can be divided into three subgroups: dorsal, lateral and medial. The dorsal group is adapted to encode the vertical component of antennal direction, while the lateral and medial groups are specialized for encoding the horizontal component. Of the three subgroups of hair sensilla, those of the lateral scapal hair plate may provide the most reliable information about the horizontal position of the antenna, irrespective of its vertical position. Extracellular recordings from representative sensilla of each scapal hair plate subgroup revealed the form of the single-unit impulses in response to hair deflection. The mechanoreceptors were characterized as typically phasic-tonic. The tonic discharge was sustained indefinitely (>20 min) as long as the hair was kept deflected. The spike frequency in the transient (dynamic) phase was both velocity- and displacement-dependent, while that in the sustained (steady) phase was displacement-dependent.

scholarly journals Use of palmae wax hydrocarbon fractions as chemotaxonomical markers in Butia and Syagrus

2009 ◽  
Vol 69 (2) ◽  
pp. 353-361 ◽  
Author(s):  
N. Paroul ◽  
RL. Cansian ◽  
M. Rossato ◽  
GF. Pauletti ◽  
LA. Serafini ◽  
...  
Keyword(s):  
Geographical Distribution ◽  
Rio Grande ◽  
Statistical Analyses ◽  
Rio Grande Do Sul ◽  
Chemotaxonomic Markers ◽  
Main Components ◽  
Made In

The wax hydrocarbon fractions of native Butia and Syagrus species collected from Palms in different regions of the of Rio Grande do Sul state (Brazil) and in Rocha (Uruguay) were analyzed to evaluate their potential as chemotaxonomic markers. The wax was extracted with chloroform and the resulting wax was fractionated by preparative TLC. The hydrocarbon fractions were analyzed by GC-MS. Statistical analyses were completed with the Statistica 5.0 program. The total crude wax yields averaged 0.31% w.w-1 dried leaves for Butia samples and 0.28% for Syagrus samples. The linear hydrocarbons represented on average 15% of the total waxes in the case of Butia samples and 13.7% in Syagrus samples. Hentriacontane and triacontane were the main components of all samples. The comparison of the means showed significant differences among Butia and Syagrus samples, and amongst Butia samples collected in different localities. In the case of the Syagrus collections no consistent groupings could be made. In the case of Butia samples the formation of three groupings could be observed, which were consistent with the species described for their geographical distribution. These results are discussed in the paper.

scholarly journals Extraction of γ-Alumina from Low-Cost Kaolin

Resources ◽  
2018 ◽  
Vol 7 (4) ◽  
pp. 63
Author(s):  
Khalil Ibrahim ◽  
Mohammad Moumani ◽  
Salsabeela Mohammad
Keyword(s):  
Low Cost ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Aluminum Metal ◽  
Alumina Particles ◽  
Two Stages ◽  
Method Of Extraction ◽  
Microcrystalline Powder ◽  
Made In

A combined process is proposed for the utilization of local kaolin to produce alumina particles. The applied process is made in two stages: calcination at 700 °C with sodium chloride and leaching with sulfuric followed by hydrochloric acids. The optimal extraction efficiency can be obtained when the conditions are as follows: leaching temperature is at 140 °C, leaching time is 3 h 45 min and concentration of sulfuric acid is 40 wt.%. The results show that the purity of alumina reaches 79.28%, which is suitable for the production of aluminum metal. It is evident that this method of extraction of alumina from the kaolin ash is practical and feasible. The structural and morphological properties of the calcined microcrystalline powder was characterized by X-ray diffraction and scanning electron microscope (SEM).

Comparison of diffused layer prepared using liquid dopant solutions and pastes for solar cell with screen printed electrodes

2016 ◽  
Vol 33 (3) ◽  
pp. 167-171 ◽  
Author(s):  
Kazimierz Drabczyk ◽  
Edyta Wróbel ◽  
Grazyna Kulesza-Matlak ◽  
Wojciech Filipowski ◽  
Krzysztof Waczynski ◽  
...  
Keyword(s):  
Solar Cells ◽  
Ethyl Alcohol ◽  
Diffusion Processes ◽  
Phosphorus Oxychloride ◽  
Low Cost ◽  
Content Type ◽  
Base Solution ◽  
Different Types ◽  
Main Components ◽  
Two Stages

Purpose The purpose of this study is comparison of the diffusion processes performed using the commercial available dopant paste made by Filmtronics and the original prepared liquid dopant solution. To decrease prices of industrially produced silicon-based solar cells, the new low-cost production processes are necessary. The main components of most popular silicon solar cells are with diffused emitter layer, passivation, anti-reflective layers and metal electrodes. This type of cells is prepared usually using phosphorus oxychloride diffusion source and metal pastes for screen printing. The diffusion process in diffusion furnace with quartz tube is slow, complicated and requires expensive equipment. The alternative for this technology is very fast in-line processing using the belt furnaces as an equipment. This approach requires different dopant sources. Design/methodology/approach In this work, the diffusion processes were made for two different types of dopant sources. The first one was the commercial available dopant paste from Filmtronics and the second one was the original prepared liquid dopant solution. The investigation was focused on dopant sources fabrication and diffusion processes. The doping solution was made in two stages. In the first stage, a base solution (without dopants) was made: dropwise deionized (DI) water and ethyl alcohol were added to a solution consisting of tetraethoxysilane (TEOS) and 99.8 per cent ethyl alcohol. Next, to the base solution, orthophosphoric acid dissolved in ethyl alcohol was added. Findings Diffused emitter layers with sheet resistance around 60 Ω/sq were produced on solar grade monocrystalline silicon wafers using two types of dopant sources. Originality/value In this work, the diffusion processes were made for two different types of dopant sources. The first one was the commercial available dopant paste from Filmtronics and the second one was the original prepared liquid dopant solution.

Sign in / Sign up

Export Citation Format

Share Document