scholarly journals Effect on the Mechanical Properties of Self-Compaction Concrete by Partial Replacement with Grinded Fibers

2019 ◽  
Vol 9 (2) ◽  
pp. 588-592
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Construction Industry ◽  
Volume Fraction ◽  
Basalt Fiber ◽  
The Self ◽  
Partial Replacement ◽  
Equal Proportion ◽  
Self Compacting Concrete ◽  
Split Tensile Strength

The development of Self-compacting concrete (SCC) is a progressive milestone in the historical backdrop of real estate and construction industry bringing about transcendent use of SCC overall these days .In this study, the effects on the mechanical properties of the Self-compacting concrete (SCC) with partial replacement of cement by grinded fiber were studied, a mixture of equal proportion of grinded glass and basalt fiber of length 6mm was used. The volume fraction of the grinded glass and basalt mixture taken are 0%, 0.15%, 0.30%, 0.45% and 0.60% by weight of cement. In order to better understand the effect of the grinded fibers on the mechanical properties of SCC, cubes and cylinders were casted and tested for compressive strength, split tensile strength and flexural strength. For each test, data was collected and then compared with target (0%) fiber specimen. The study showed remarkable improvements in all properties of self-compacting concrete such as a compressive strength as well as enhanced durability.

scholarly journals Experimental Investigation of Flow and Mechanical Properties of Fibrofor Fiber Reinforced Self-Compacting Concrete

2019 ◽  
Vol 8 (2) ◽  
pp. 8-15
Author(s):  
H. R. Arun Kumar ◽  
B. Shivakumaraswamy
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Working Environment ◽  
Fiber Reinforced ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Hardened Properties

Self Compacting Concrete is a material used in the construction that has excellent deformability in the fresh state and high resistance of segregation, and can be replaced and compacted under its self-weight without applying vibration which leads to substantial advantages related to better homogeneity, enhancement of working environment and improvement in the productivity by increasing the speed of construction. Concrete can be formulated with high compressive strength but always has lower tensile strength. Tensile strength and other properties of concrete can be enhanced by adding fibers due to which the workability of concrete mix reduces and in order to achieve the desired Workability super-plasticizers is added. In the present work the use of fibrofor fiber in the production of self-compacting concrete (SCC) has been studied to identify how fresh and hardened properties of SCC are affected by the addition of fibers. The fibrofor fiber of 19mm standard length is incorporated into the SCC mixtures as 0.5kg/m3, 1.0kg/m3, 1.5kg/m3of concrete. Test on fresh SCC like slump Flow test, T50, V-Funnel test, J-Ring slump test and L-Box test were performed for an understanding of flow of SCC and tests on hardened properties like flexural strength, compressive strength and split tensile strength have been conducted to identify the hardened properties of SCC produced with fibrofor fiber. A comparative study between plain concrete, SCC without fiber and SCC with fiber has been done. Mix design for M40 grade concrete has been done according to EFNARC guidelines. The results reveal that the use of fibro for fiber decreases the workability but increases the mechanical properties of SCC. The optimum volume fraction of fibrofor fiber is determined as 1kg/m3 considering the optimized flexural strength and split tensile strength based properties of SCC. Due to increase in strength properties of fiber reinforced SCC that can be used for pavement construction and various other structures such as buildings, water retaining structures, reservoir structures and tunnel etc.

scholarly journals Effect of steel fibers over the Self Compacting Concrete

2019 ◽  
Vol 9 (2S2) ◽  
pp. 38-41 ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Construction Industry ◽  
Steel Fibers ◽  
The Self ◽  
Engineering Properties ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Conventional Concrete ◽  
Good Outcome

The introduction of self-compacting concrete in the construction industry overcomes the flaws caused due to the improper compaction of concrete. Fibers are proved to increase the properties of conventional concrete. This research focuses on the performance of self-compacting concrete after augmenting steel fibers. The steel fibers are added in proportions such as 0.25 percentage, 0.5 percentage, 0.75 percentage and 1 percentage. After casting the self- compacting concrete, the strength was assessed for 7 days and 28 days and its compressive strength and split tensile strength was analyzed. The inclusion of steel fibers yielded good outcome in the tests and it is proved to yield better engineering properties.

Low Strength Self Compacting Concrete Compressive Strength Test

2013 ◽  
Vol 275-277 ◽  
pp. 2041-2044
Author(s):  
Feng Yan ◽  
Nan Pang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Compression Strength ◽  
Strength Test ◽  
The Self ◽  
Concrete Compressive Strength ◽  
Self Compacting Concrete ◽  
Intensity Index ◽  
Compressive Strength Test ◽  
Low Strength

In this paper,the mechanical properties were studied,the self compacting concrete cubic compression strength,prismatic compressive strength test,discussed two kinds of relationship between intensity index.

scholarly journals Assessment on Influence of Corncob Ash as a Partial Replacement of Cement in Concrete

2020 ◽  
Vol 9 (8) ◽  
pp. 210-212
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Waste Product ◽  
Partial Replacement ◽  
Corn Cob ◽  
Split Tensile Strength ◽  
Concrete Mechanical Properties ◽  
Building Purpose ◽  
Emission Of Greenhouse Gases

In an attempt to renovate waste product into constructive material for the building purpose, this research considered the use of corn cob ash (CCA) as a partial replacement of cement. Hence, in this research, we have proposed an eco-friendly solution by investigating the utilization of corncob ash with 0, 5, 10 and 15% replacement for cement in M30 grade of concrete Mechanical Properties such as compressive strength, Split tensile strength and Flexural strength at 7,14,28 days are examined in laboratory. The results reveal that Corn Cob Ash can be used as a partial replacement for cement which in turn reduces the emission of greenhouse gases.

scholarly journals Influence of Hybrid Fibre on the Mechanical Properties of Concrete

2019 ◽  
Vol 9 (1) ◽  
pp. 2637-2641
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Volume Fraction ◽  
Plain Concrete ◽  
Strength Test ◽  
Fibre Reinforced Concrete ◽  
Split Tensile Strength ◽  
Hybrid Fibre

This study presents the experimental investigation carried out to study the mechanical properties of concrete with and without the addition of fibres to it.d Concrete is the most consumed material in the world which has the property of strong in compression and weak in tension. Also plain concrete possess very limited ductility and little resistance to cracking. Hence fibres are introduced in the concrete to improve the tensile strength & brittleness of the concrete. These fibres which are closely spaced and dispersed uniformly in the concrete arrest the micro and macro cracks and improve the tensile strength of concrete. Concrete admixed with such fibres are known as Fibre Reinforced Concrete. The combination of two (or) more fibres called as Hybridization is carried out in this work. M25 grade concrete is designed as per IS 10262:2009 with the volume fraction of 0-1.5%. The workability of the concrete is affected due to the addition of fibres and hence super plasticizers are added to the concrete. The fibres considered for the study are (i) Crimped Steel Fibre (0-1.5%) and (ii) Shortcut Glass Fibre (0.1-0.2%). The behaviour of the hybrid fibre reinforced concrete is investigated by conducting compressive strength test on cube specimen of size 150mmx150mmx150mm and split tensile strength test on cylinder specimen of size 150mm diameter and 300mm height. From the experimental results, the optimum fibre combinations for maximum compressive strength and spilt tensile strength of concrete are identified.

scholarly journals Study of Mechanical Properties of Pervious Concrete as a Pavement Material by Partial Replacement of Ggbs in Cement with Addition of Cellulose Fibers

2018 ◽  
Vol 7 (3.31) ◽  
pp. 219
Author(s):  
K M. Ganesh ◽  
A S. S. Vara Prasad ◽  
P S. Viswa Harish ◽  
A Subrahmanyam Raju
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Cellulose Fibers ◽  
Transportation Systems ◽  
Pervious Concrete ◽  
Partial Replacement ◽  
Split Tensile Strength ◽  
Rapid Urbanization ◽  
Subgrade Soil

Among all the transportation systems roadways is most commonly used transportation system. But in present scenario roads faces a lot of problems like potholes, cracks and many other distresses. Not even these but water is also the main enemy to the pavement which causes deformations and changes the texture of subgrade soil resulting in large variation in performance.The total Impervious Surface Change (ISC) in India for the decade 2000 to 2010 is 2274.62 km2. This is one of the most considerable problems due to rapid urbanization where there is a tremendous increase in construction of black topped and different types of impervious pavements. This has an adverse effect on the environment as the storm water becomes stagnant over the surface of the pavement due to inadequate drainage conditions.The necessity for reducing stagnation and the surface runoff has given the inception of pervious pavement surface. Pervious concrete pavement is a special type of its kind with high perviousness with no or minimal fines which allow water to percolate through it and thus the water which is accumulated over the surface can be collected and used for various purposes.The present work studied the mechanical properties and also the permeability of pervious concrete of mix 3:1 aggregate cement ratio. The control mix is altered by partially replacing 30% of cement with Ground Granulated Blast furnace Slag (GGBS), included Cellulose fibers of 5% of weight of the cementitious material and combination of both in one mix and compared the results obtained.The properties such as compressive strength, split tensile strength, flexural strength and permeability are assessed by performing tests. It was observed that there is an increase in Compressive Strength, Split Tensile Strength, Flexure Strength and decrease in the permeability in the altered pervious concrete mixes when compared to the Pervious concrete with no additives.  

scholarly journals The Effects of Fiber Length and Volume on Material Properties and Crack Resistance of Basalt Fiber Reinforced Concrete (BFRC)

2019 ◽  
Vol 2019 ◽  
pp. 1-17 ◽  
Author(s):  
Xinzhong Wang ◽  
Jun He ◽  
Ayman S. Mosallam ◽  
Chuanxi Li ◽  
Haohui Xin
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fiber Length ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Basalt Fiber ◽  
Physical And Mechanical Properties ◽  
Fiber Reinforced Concrete ◽  
Fiber Volume ◽  
Shrinkage Cracking

Basalt fiber reinforced concrete (BFRC) has been widely utilized in various constructions such as buildings, large industrial floors, and highways, due to its excellent physical and mechanical properties, as well as low production cost. In order to address the influence of basic parameters such as fiber volume fraction (0.05∼0.40%), fiber length (12∼36 mm) of BF, and compressive strength (30, 40, and 50 MPa) of concrete on both physical and mechanical properties of BFRC including compressive strength, tensile and flexural strength, workability, and anti-dry-shrinkage cracking properties, a series of standard material tests were conducted. Experimental results indicated that clumping of fibers may occur at relatively higher fiber volume fraction resulting in mixing and casting problems. Based on experimental values of mechanical properties and anti-dry-shrinkage cracking resistance of BFRC, the reasonable basalt fiber length and fiber volume fractions are identified. The addition of a small amount of short basalt fibers can result in a considerable increase in both compressive strength and modulus of rupture (MoR) of BFRC and that the proposed fiber length and content are 12.0 mm and 0.10%∼0.15%, respectively. As the length of basalt fibers increases, the development of early shrinkage cracks decreases initially and then increases slowly and the optimal fiber length is 18.0 mm. Results of the study also indicated that early shrinkage cracks decrease with the increase of fiber volume fraction, and when the volume fraction of 0.20% is used, no cracks were observed. All the findings of the present study may provide reference for the material proportion design of BFRC.

Experiment for the Mix Proportion Design of Green and Self-Compacting C40 Concrete

2013 ◽  
Vol 634-638 ◽  
pp. 2680-2683
Author(s):  
Sheng Ju Zhang ◽  
Xin Gang Wang ◽  
Su Rui Wang
Keyword(s):  
Construction Industry ◽  
Coarse Aggregate ◽  
Volume Fraction ◽  
Raw Materials ◽  
The Self ◽  
Mineral Admixtures ◽  
Special Significance ◽  
Self Compacting Concrete ◽  
Green Concrete ◽  
Mix Proportion

The self-compacting concrete is playing more and more important role in the construction industry with the advantages of greater mobility, better stability, and excellent character of filling the gap through capacity. There are different raw materials and construction conditions in each region, so, the research and development of the self-compacting concrete has a special significance according to the specific circumstances of each region. In this study, the parameters of the volume of coarse aggregate, mortar volume, the volume fraction of the sand, the mineral admixtures ash and cementatious coefficient were selected and calculated, and the C40 self-compacting green concrete was successfully configured.

Mechanical Properties of Concrete Mixed with SiO2 and CaCO3 Nanoparticles

2011 ◽  
Vol 71-78 ◽  
pp. 1233-1236
Author(s):  
De Zhi Wang ◽  
Yun Fang Meng ◽  
Yin Yan Zhang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Partial Replacement ◽  
Replacement Level ◽  
Split Tensile Strength ◽  
Optimal Replacement ◽  
Compressive Strength Of Concrete

The split tensile strength and compressive strength of concrete mixed with SiO2and CaCO3nanoparticles have been experimentally studied. SiO2nanoparticles as a partial cement replaced by 0.5, 1.0, 2.0 and 3.0 wt.% and CaCO3nanoparticles by 1.0 and 3.0 wt.% were added partially to concrete. Curing of the specimens has been carried out for 7, 28, 78 and 128 days after casting. SiO2nanoparticle as a partial replacement of cement up to 3.0 wt.% could accelerate formation of CSH gel at the early ages and hence increase the split tensile strength and compressive strength. The optimal replacement level of cement by SiO2nanoparticles for producing concrete with improved strength was set at 2.0 wt.%. CaCO3nanoparticles as a partial replacement of cement up to 3.0 wt.% could consume crystalline Ca(OH)2and accelerate formation of calcium carboaluminate hydrate at the early ages and increase the split tensile strength and compressive strength. The optimal replacement level of cement by CaCO3nanoparticles for producing concrete with improved strength was set at 3.0 wt.%.

MAGNETIC FIELD TREATED WATER INFLUENCE ON STRUCTURAL CONCRETE ELEMENTS: ENVIRONMENTAL ISSUES OF CONCERN

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Ben Ngene ◽  
Gideon Bamigboye ◽  
Chidiebere Agomo ◽  
Kenechukwu Eneh ◽  
Olayinka Olajide
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Compressive Strength ◽  
Waste Glass ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Self Compacting Concrete ◽  
Conventional Concrete ◽  
Treated Water ◽  
Magnetized Water

The impact of magnetized water on the strength properties of concrete calls for a holistic appraisal of its effect on the environment of production and use. In this study, the influence of the Magnetic Field Treated Water (MFTW) on the strength of concrete produced under various environments is considered. The work considered three environments of use of magnetized water in concrete with respect to partial replacement of fine aggregate with waste glass; quality of curing medium on mechanical properties of concrete and effect on the mechanical properties of self-compacting concrete. The three scenarios presented involved preparing and testing concrete cubes made with magnetized water, cement, fine (sand and glass) and coarse (granite) aggregates at various levels of combination and environment of curing. The concrete cubes were cured for 7, 14, 28, and 56 days and the strength and other parameters, such as slump and workability, were compared with conventional concrete in normal environment. It was observed that concrete under self-compacting concrete made with MFTW had a 9.1% increase in compressive strength than normal; for concrete made with clay brick powder and MFTW, both the workability and compressive strength was higher than normal. The magnetized water in concrete with waste glass as partial replacement had higher slump value and 24% increase in compressive strength than conventional concrete. MFTW therefore improves strength development of concrete.

Sign in / Sign up

Export Citation Format

Share Document