scholarly journals Heat Transfer Reaction on a Viscous Dissipative Free Convective Radiating Stream over a Permeable Laminate within Presence of Induced Magnetic Field

2020 ◽  
Vol 9 (3) ◽  
pp. 2057-2062
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Partial Differential Equations ◽  
Magnetic Flux ◽  
Differential Equations ◽  
Heat Source ◽  
Transfer Reaction ◽  
Induced Magnetic Field ◽  
Fundamental Point ◽  
Physical Features

The fundamental point of the paper is to inspect the heat transfer consequence on a viscous dissipative unconfined convective Radiating stream over a permeable shield in the existence of induced- magnetic flux. Consistent magnetic field of force will be applied vertically towards the plate which is electrically non-conducting. Partial differential equations which are non linear coupled worked out by Galerkin technique, the consequence of Radiation with Heat source parameter and other physical features on velocity, temperature along with induced-magnetic field are explained by graphs.

scholarly journals Parametric analysis of the heat transfer behavior of the nano-particle ionic-liquid flow between concentric cylinders

2021 ◽  
Vol 13 (6) ◽  
pp. 168781402110240
Author(s):  
Rehan Ali Shah ◽  
Hidayat Ullah ◽  
Muhammad Sohail Khan ◽  
Aamir Khan
Keyword(s):  
Heat Transfer ◽  
Ionic Liquid ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Heat Source ◽  
Ordinary Differential Equations ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Concentric Cylinders

This paper investigates the enhanced viscous behavior and heat transfer phenomenon of an unsteady two di-mensional, incompressible ionic-nano-liquid squeezing flow between two infinite parallel concentric cylinders. To analyze heat transfer ability, three different type nanoparticles such as Copper, Aluminum [Formula: see text], and Titanium oxide [Formula: see text] of volume fraction ranging from 0.1 to 0.7 nm, are added to the ionic liquid in turns. The Brinkman model of viscosity and Maxwell-Garnets model of thermal conductivity for nano particles are adopted. Further, Heat source [Formula: see text], is applied between the concentric cylinders. The physical phenomenon is transformed into a system of partial differential equations by modified Navier-Stokes equation, Poisson equation, Nernst-Plank equation, and energy equation. The system of nonlinear partial differential equations, is converted to a system of coupled ordinary differential equations by opting suitable transformations. Solution of the system of coupled ordinary differential equations is carried out by parametric continuation (PC) and BVP4c matlab based numerical methods. Effects of squeeze number ( S), volume fraction [Formula: see text], Prandtle number (Pr), Schmidt number [Formula: see text], and heat source [Formula: see text] on nano-ionicliquid flow, ions concentration distribution, heat transfer rate and other physical quantities of interest are tabulated, graphed, and discussed. It is found that [Formula: see text] and Cu as nanosolid, show almost the same enhancement in heat transfer rate for Pr = 0.2, 0.4, 0.6.

Magnetohydrodynamic Mixed Convective Flow Due to a Vertical Plate With Induced Magnetic Field

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
R. Nandkeolyar ◽  
M. Narayana ◽  
S. S. Motsa ◽  
P. Sibanda
Keyword(s):  
Magnetic Field ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Fluid Velocity ◽  
Nonlinear Partial Differential Equations ◽  
Linearization Method ◽  
Fluid Temperature ◽  
Magnetic Field Effects ◽  
Induced Magnetic Field ◽  
Partial Differential

The steady hydromagnetic flow of a viscous, incompressible, perfectly conducting, and heat absorbing fluid past a vertical flat plate under the influence of an aligned magnetic field is studied. The flow is subject to mixed convective heat transfer. The fluid is assumed to have a reasonably high magnetic Prandtl number which causes significant-induced magnetic field effects. Such fluid flows find application in many magnetohydrodynamic devices including MHD power-generation. The effects of viscous dissipation and heat absorption by the fluid are investigated. The governing nonlinear partial differential equations are converted into a set of nonsimilar partial differential equations which are then solved using a spectral quasi-linearization method (SQLM). The effects of the important parameters on the fluid velocity, induced magnetic field, fluid temperature and as well as on the coefficient of skin-friction and the Nusselt number are discussed qualitatively.

scholarly journals MHD stagnation-point flow and heat transfer past a stretching/shrinking sheet in a hybrid nanofluid with induced magnetic field

2019 ◽  
Vol 30 (3) ◽  
pp. 1345-1364 ◽  
Author(s):  
Mohamad Mustaqim Junoh ◽  
Fadzilah Md Ali ◽  
Norihan Md Arifin ◽  
Norfifah Bachok ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Induced Magnetic Field ◽  
Content Type

Purpose The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting fluid past a stretching/shrinking sheet with the effect of induced magnetic field. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of nonlinear ordinary differential equations via the similarity transformations before they are solved numerically using the “bvp4c” function in MATLAB. Findings It is found that there exist non-unique solutions, namely, dual solutions for a certain range of the stretching/shrinking parameters. The results from the stability analysis showed that the first solution (upper branch) is stable and valid physically, while the second solution (lower branch) is unstable. Practical implications This problem is important in the heat transfer field such as electronic cooling, engine cooling, generator cooling, welding, nuclear system cooling, lubrication, thermal storage, solar heating, cooling and heating in buildings, biomedical, drug reduction, heat pipe, space aircrafts and ships with better efficiency than that of nanofluids applicability. The results obtained are very useful for researchers to determine which solution is physically stable, whereby, mathematically more than one solution exist. Originality/value The present results are new and original for the problem of MHD stagnation-point flow over a stretching/shrinking sheet in a hybrid nanofluid, with the effect of induced magnetic field.

scholarly journals Influences of Slip Velocity and Induced Magnetic Field on MHD Stagnation-Point Flow and Heat Transfer of Casson Fluid over a Stretching Sheet

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mohamed Abd El-Aziz ◽  
Ahmed A. Afify
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Slip Velocity ◽  
Casson Fluid ◽  
Integration Scheme ◽  
Physical Parameters ◽  
Induced Magnetic Field ◽  
Casson Fluid Model

The steady MHD boundary layer flow near the stagnation point over a stretching surface in the presence of the induced magnetic field, viscous dissipation, magnetic dissipation, slip velocity phenomenon, and heat generation/absorption effects has been investigated numerically. The Casson fluid model is used to characterize the non-Newtonian fluid behavior. The governing partial differential equations using appropriate similarity transformations are reduced into a set of nonlinear ordinary differential equations, which are solved numerically using a shooting method with fourth-order Runge-Kutta integration scheme. Comparisons with the earlier results have been made and good agreements were found. Numerical results for the velocity, induced magnetic field, temperature profiles, skin friction coefficient, and Nusselt number are presented through graphs and tables for various values of physical parameters. Results predicted that the magnetic parameter with α<1 has the tendency to enhance the heat transfer rate, whereas the reverse trend is seen with α>1. It is also noticed that the rate of heat transfer is a decreasing function of the reciprocal of a magnetic Prandtl number, whereas the opposite phenomenon occurs with the magnitude of the friction factor.

scholarly journals Effects of Mass Suction on MHD Boundary Layer Flow and Heat Transfer over a Porous Shrinking Sheet with Heat Source/Sink

2019 ◽  
Vol 8 (10) ◽  
pp. 263-266 ◽  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Heat Source ◽  
Ordinary Differential Equations ◽  
Shrinking Sheet ◽  
Dynamic Framework ◽  
Mhd Boundary Layer ◽  
Source Sink

An examination is made to think about the impacts of the mass suction on the steady flow of 2-D magneto-hydrodynamic (MHD) boundary layer flows and heat transfer past on a shrinking sheet with source/sink. In the dynamic framework, an-uniform magnetic field acts perpendicular to the plane of flow. The governing non-dimensional partial differential equations are changed into nonlinear ordinary differential equations (ODE’s) using similarity transformations. The so derived ordinary differential equations are solved numerically by using the MAT LAB solver bvp5c. From the keen examinations it is found that the velocity inside the boundary layer increments with increment of wall mass suction, magnetic field and reportedly the thickness of the momentum layer diminishes. There is a reduction in temperature as increases the Prandtl number. With heat source specifications, Hartmann number, heat sink parameter & the temperature increments are seen. Moreover, for strong heat source heat assimilation at the sheet happens.

scholarly journals Numerical Solution of MHD Viscoelastic Nanofluid Flow over a Stretching Sheet with Partial Slip and Heat Source/Sink

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Mania Goyal ◽  
Rama Bhargava
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Brownian Motion ◽  
Differential Equations ◽  
Heat Source ◽  
Uniform Magnetic Field ◽  
Stretching Sheet ◽  
Partial Slip ◽  
Local Similarity ◽  
Source Sink

We analyze the effect of velocity slip boundary condition on the flow and heat transfer of non-Newtonian nanofluid over a stretching sheet with a heat source/sink, under the action of a uniform magnetic field, orientated normally to the plate. The Brownian motion and thermophoresis effects are also considered. The boundary layer equations governed by the partial differential equations are transformed into a set of ordinary differential equations with the help of local similarity transformations. The differential equations are solved by the variational finite element method (FEM). We have examined the effects of different controlling parameters, namely, the Brownian motion parameter, the thermophoresis parameter, uniform magnetic field, viscoelastic parameter, Prandtl number, heat source/sink parameter, Lewis number, and the slip parameter on the flow field and heat transfer characteristics. Graphical display of the numerical examination is performed to illustrate the influence of various flow parameters on the velocity, temperature, concentration, and Nusselt and Sherwood numbers distributions. The present study has many applications in coating and suspensions, cooling of metallic plate, paper production, heat exchangers technology, and materials processing exploiting.

A new approach for inextensible flows of binormal spherical indicatrices of magnetic curves

2019 ◽  
Vol 16 (02) ◽  
pp. 1950020 ◽  
Author(s):  
Talat Korpinar ◽  
Selçuk Baş
Keyword(s):  
Magnetic Field ◽  
Riemannian Manifold ◽  
Charged Particle ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Partial Differential ◽  
New Approach ◽  
Inextensible Flows ◽  
Physical Features

In this study, we obtain the special type of magnetic trajectories associated with a magnetic field [Formula: see text] defined on a 3D Riemannian manifold. We investigate a new representation of binormal spherical indicatrices of magnetic curves. Thus, we study [Formula: see text]-magnetic curves terms of inextensible flows. Furthermore, we give some new characterizations of curvatures in terms of some partial differential equations. Finally, we examine some geometrical and physical features of the moving charged particle corresponding to the [Formula: see text]-magnetic curves. Namely, we compute uniformity of the [Formula: see text]-magnetic curves.

scholarly journals Mhd flow and heat transfer of two immiscible fluids with induced magnetic field effects

2012 ◽  
Vol 16 (suppl. 2) ◽  
pp. 323-336 ◽  
Author(s):  
Zivojin Stamenkovic ◽  
Dragisa Nikodijevic ◽  
Milos Kocic ◽  
Jelena Nikodijevic
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Mhd Flow ◽  
Immiscible Fluids ◽  
Magnetic Field Effects ◽  
Induced Magnetic Field ◽  
Electrically Conducting ◽  
Flow And Heat Transfer ◽  
Loading Parameter

The paper investigates the magnetohydrodynamic flow of two immiscible, electrically conducting fluids between isothermal and insulated moving plates in the presence of an applied electric and inclined magnetic field with the effects of induced magnetic field. Partial differential equations governing the flow and heat transfer and magnetic field conservation are transformed to ordinary differential equations and solved exactly in both fluid regions, under physically appropriate boundary and interface conditions. Closed-form expressions are obtained for the non-dimensional velocity, non-dimensional induced magnetic field and nondimensional temperature. The analytical results for various values of the Hartmann number, the angle of magnetic field inclination, loading parameter and the ratio of plates? velocities are presented graphically to show their effect on the flow and heat transfer characteristics.

scholarly journals Investigation of binary chemical reaction in magnetohydrodynamic nanofluid flow with double stratification

2021 ◽  
Vol 13 (5) ◽  
pp. 168781402110162
Author(s):  
Aisha Anjum ◽  
Sadaf Masood ◽  
Muhammad Farooq ◽  
Naila Rafiq ◽  
Muhammad Yousaf Malik
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Hartmann Number ◽  
Concentration Field ◽  
Double Stratification ◽  
Nanofluid Flow ◽  
Homotopy Analysis ◽  
Flow Heat ◽  
Chemically Reactive Species ◽  
Physical Features

This article addresses MHD nanofluid flow induced by stretched surface. Heat transport features are elaborated by implementing double diffusive stratification. Chemically reactive species is implemented in order to explore the properties of nanofluid through Brownian motion and thermophoresis. Activation energy concept is utilized for nano liquid. Further zero mass flux is assumed at the sheet’s surface for better and high accuracy of the out-turn. Trasnformations are used to reconstruct the partial differential equations into ordinary differential equations. Homotopy analysis method is utilized to obtain the solution. Physical features like flow, heat and mass are elaborated through graphs. Thermal stratified parameter reduces the temperature as well as concentration profile. Also decay in concentration field is noticed for larger reaction rate parameter. Both temperature and concentration grows for Thermophoresis parameter. To check the heat transfer rate, graphical exposition of Nusselt number are also discussed and interpret. It is noticed that amount of heat transfer decreases with the increment in Hartmann number. Numerical results shows that drag force increased for enlarged Hartmann number.

Sign in / Sign up

Export Citation Format

Share Document