scholarly journals The Effect of Piezoelectric Shape on Energy Harvesting Shoes

2019 ◽  
Vol 8 (12) ◽  
pp. 918-923
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Piezoelectric Effect ◽  
Mechanical Energy ◽  
Piezoelectric Element ◽  
Electrical Energy ◽  
Human Motion ◽  
Piezoelectric Energy ◽  
Piezoelectric Elements ◽  
Bridge Rectifier

Piezoelectric elements are commonly installed in shoe sole to make use of the piezoelectric effect due to the vibration generated by the human motion. Piezoelectric shoe is a great device that can be used to harvest energy and can be improved by adding more piezoelectric elements and providing storage to store the harvested energy. However, not many researchers focus on the analyzation of piezoelectric elements’ shape that may affect the efficiency of energy harvesting. In this paper, piezoelectric energy harvesting shoes are designed with piezoelectric elements installed inside the soles of the shoes, thereby gaining mechanical energy from user while walking and running. The mechanical energy was applied to the piezoelectric elements and converted into electrical energy. Bridge rectifier was used to convert the AC voltage output into DC voltage. The project focused on analyzation of the efficiency between round and square shaped piezoelectric elements. Different shape of the piezoelectric element produced different amount of output voltage. Square shaped piezoelectric tended to produce lesser output voltage than the round piezoelectric element. A round piezoelectric with diameter of 4.5cm produced mean output voltage up to 11.56V and square piezoelectric with size of 4.5cm x 4.5cm produced 6.12V. However, this all depended on how much pressure that was applied onto the piezoelectric elements.

Development of High-Efficiency Piezoelectric-Based Energy-Harvesting Power Sources Using Motion-Doubling Mechanisms

2013 ◽  
Author(s):  
Jahangir Rastegar ◽  
Richard Murray
Keyword(s):  
Energy Harvesting ◽  
Mechanical Energy ◽  
Piezoelectric Element ◽  
Electrical Energy ◽  
Great Success ◽  
Force Transmission ◽  
Power Sources ◽  
Piezoelectric Elements ◽  
Number Of Cycles ◽  
Mass Spring

Piezoelectric-based energy harvesting power sources that employ spring-mass vibrating systems have been employed with great success to harvest energy from various shock loading and/or vibration and oscillatory motions in numerous systems. In these systems, the external stimuli is used to store mechanical energy in the spring of a mass-spring unit which is attached to a piezoelectric element or a magnet and coil generator, and generate electrical energy as the vibrating mass-spring unit undergoes vibration and applies a cyclic load to the piezoelectric element. In this paper, the implementation of such energy harvesting power sources with a novel motion-doubling mechanism is presented. This novel force transmission method has two key advantages. Firstly, it provides the means to amplify the force applied to the piezoelectric element. Secondly, it provides the means of doubling the number of cycles of compressive forces applied to the piezoelectric elements during each cycle of vibration as compared to the direct mass-spring-piezoelectric generators that have been developed to date. The motion doubling and the resulting halving of the required number of cycles of vibration of the mass-spring unit for generating a certain amount of electrical energy has the effect of significantly increasing the mechanical to electrical energy conversion efficiency of the power source by significantly reducing structural damping losses in the spring element and by the increase in the level of force that is applied to the energy harvesting piezoelectric elements. The design and prototype fabrication of such an energy harvesting power sources is discussed.

Energy harvesting from quasi-static deformations via bilaterally constrained strips

2018 ◽  
Vol 29 (18) ◽  
pp. 3572-3581
Author(s):  
Suihan Liu ◽  
Ali Imani Azad ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Energy Resource ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Budget ◽  
Piezoelectric Energy ◽  
Static Conditions

Piezoelectric energy harvesting from ambient vibrations is well studied, but harvesting from quasi-static responses is not yet fully explored. The lack of attention is because quasi-static actions are much slower than the resonance frequency of piezoelectric oscillators to achieve optimal outputs; however, they can be a common mechanical energy resource: from large civil structure deformations to biomechanical motions. The recent advances in bio-micro-electro-mechanical systems and wireless sensor technologies are motivating the study of piezoelectric energy harvesting from quasi-static conditions for low-power budget devices. This article presents a new approach of using quasi-static deformations to generate electrical power through an axially compressed bilaterally constrained strip with an attached piezoelectric layer. A theoretical model was developed to predict the strain distribution of the strip’s buckled configuration for calculating the electrical energy generation. Results from an experimental investigation and finite element simulations are in good agreement with the theoretical study. Test results from a prototyped device showed that a peak output power of 1.33 μW/cm2 was generated, which can adequately provide power supply for low-power budget devices. And a parametric study was also conducted to provide design guidance on selecting the dimensions of a device based on the external embedding structure.

Multiple Resonances Piezoelectric Energy Harvesting Generator

2009 ◽  
Author(s):  
Shaofan Qi ◽  
Roger Shuttleworth ◽  
S. Olutunde Oyadiji
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Limited Bandwidth ◽  
Piezo Element ◽  
Piezoelectric Energy ◽  
Wide Range ◽  
Environmental Vibration ◽  
Design And Testing

Energy harvesting is the process of converting low level ambient energy into usable electrical energy, so that remote electronic instruments can be powered without the need for batteries or other supplies. Piezoelectric material has the ability to convert mechanical energy into electrical energy, and cantilever type harvesters using this material are being intensely investigated. The typical single cantilever energy harvester design has a limited bandwidth, and is restricted in ability for converting environmental vibration occurring over a wide range of frequencies. A multiple cantilever piezoelectric generator that works over a range of frequencies, yet has only one Piezo element, is being investigated. The design and testing of this novel harvester is described.

Piezoelectric wind energy harvester for low-power sensors

2011 ◽  
Vol 22 (18) ◽  
pp. 2215-2228 ◽  
Author(s):  
Jayant Sirohi ◽  
Rohan Mahadik
Keyword(s):  
Energy Harvesting ◽  
Wind Energy ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Load Resistance ◽  
Operating Conditions ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Nodes ◽  
Piezoelectric Energy

There has been increasing interest in wireless sensor networks for a variety of outdoor applications including structural health monitoring and environmental monitoring. Replacement of batteries that power the nodes in these networks is maintenance intensive. A wind energy–harvesting device is proposed as an alternate power source for these wireless sensor nodes. The device is based on the galloping of a bar with triangular cross section attached to a cantilever beam. Piezoelectric sheets bonded to the beam convert the mechanical energy into electrical energy. A prototype device of size approximately 160 × 250 mm was fabricated and tested over a range of operating conditions in a wind tunnel, and the power dissipated across a load resistance was measured. A maximum power output of 53 mW was measured at a wind velocity of 11.6 mph. An analytical model incorporating the coupled electromechanical behavior of the piezoelectric sheets and quasi-steady aerodynamics was developed. The model showed good correlation with measurements, and it was concluded that a refined aerodynamic model may need to include apparent mass effects for more accurate predictions. The galloping piezoelectric energy-harvesting device has been shown to be a viable option for powering wireless sensor nodes in outdoor applications.

Circuit Development of Piezoelectric Energy Harvesting Device for Recharging Solid-State Batteries

2012 ◽  
Author(s):  
Yuejuan Li ◽  
Marvin H. Cheng ◽  
Ezzat G. Bakhoum
Keyword(s):  
Solid State ◽  
Energy Density ◽  
Energy Harvesting ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Sources ◽  
Piezoelectric Energy ◽  
Piezoelectric Elements ◽  
Volume Energy ◽  
Solid State Batteries

Piezoelectric devices have been widely used as a means of transforming ambient vibrations into electrical energy that can be stored and used to power other devices. This type of power generation devices can provide a convenient alternative to traditional power sources used to operate certain types of sensors/actuators, MEMS devices, and microprocessor units. However, the amount of energy produced by these devices is in many cases far too small to directly power an electrical device. Therefore, much of the research into power harvesting has focused on methods of accumulating the energy until a sufficient amount is present, allowing the intended electronics to be powered. Due to the tiny amount of harvestable power from a single device, it is critical to collect vibration energy efficiently. Many research groups have developed various methods to operate the harvesting devices at their resonant frequencies for maximal amount of energy. Different techniques of conversion circuits are also investigated for efficient transformation from mechanical vibration to electrical energy. However, efforts have not been made to the analysis of array configuration of energy harvesting elements. Poor combination of piezoelectric elements, such as phase difference, cannot guarantee the increasing amount of harvested energy. To realize a piezoelectric energy-harvesting device with higher volume energy density, the energy conversion efficiencies of different array configurations were investigated. In the present study, various combinations of piezoelectric elements were analyzed to achieve higher volume energy density. A charging circuit for solid-state batteries with planned energy harvesting strategy was also proposed. With the planned harvesting strategy, the required charging time can be estimated. Thus, the applicable applications can be clearly identified. In this paper, optimal combination of piezoelectric cantilevers and different modes of charging methods were investigated. The results provide a means of choosing the piezoelectric device to be used and estimate the amount of time required to recharge a specific capacity solid-state battery.

Electrical Energy Harvesting Using a Mechanical Rectification Approach

Aerospace ◽  
2006 ◽  
Author(s):  
R. M. Tieck ◽  
G. P. Carman ◽  
D. G. Enoch Lee
Keyword(s):  
Energy Density ◽  
Energy Harvesting ◽  
Power Density ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
New Approach ◽  
Piezoelectric Energy ◽  
Power Densities ◽  
Frequency Rectification

This paper presents a new approach using frequency rectification to harvest electrical energy from mechanical energy using piezoelectric devices. The rectification approach utilizes a linearly traveling Rectifier to impart vibrational motion to a cantilever piezoelectric bimorph. A conventional cantilever-type energy harvester is tested aside the rectified beam. The Standard beam generated 0.11 W of power, a power density of 15.63 kW/m3, and an energy density of 130.7 J/m3. The Rectified beam generated 580 mW of power, a power density of 871.92 kW/m3, and an energy density of 313.15 J/m3, a factor 2.4 greater than conventional energy harvesting methods. These results confirm the original thesis that a mechanically rectified piezoelectric Energy Harvester would generate larger Energy and Power Densities as well as Specific Powers, compared to conventional technologies.

scholarly journals PVDF-TrFE Electroactive Polymer Mechanical-to-Electrical Energy Harvesting Experimental Bimorph Structure

MRS Advances ◽  
2017 ◽  
Vol 2 (56) ◽  
pp. 3441-3446 ◽  
Author(s):  
William G. Kaval ◽  
Robert A. Lake ◽  
Ronald A. Coutu
Keyword(s):  
Energy Harvesting ◽  
Vibrational Energy ◽  
Mechanical Energy ◽  
Low Frequency ◽  
Human Movement ◽  
Electrical Energy ◽  
Mechanical Analysis ◽  
Electroactive Polymer ◽  
Energy Output ◽  
Piezoelectric Energy

ABSTRACTResearch of electrostrictive polymers has generated new opportunities for harvesting energy from the surrounding environment and converting it into usable electrical energy. Electroactive polymer (EAP) research is one of the new opportunities for harvesting energy from the natural environment and converting it into usable electrical energy. Piezoelectric ceramic based energy harvesting devices tend to be unsuitable for low-frequency mechanical excitations such as human movement. Organic polymers are typically softer and more flexible therefore translated electrical energy output is considerably higher under the same mechanical force. In addition, cantilever geometry is one of the most used structures in piezoelectric energy harvesters, especially for mechanical energy harvesting from vibrations. In order to further lower the resonance frequency of the cantilever microstructure, a proof mass can be attached to the free end of the cantilever. Mechanical analysis of an experimental bimorph structure was provided and led to key design rules for post-processing steps to control the performance of the energy harvester. In this work, methods of materials processing and the mechanical to electrical conversion of vibrational energy into usable energy were investigated. Materials such as polyvinyledenedifluoridetetra-fluoroethylene P(VDF-TrFE) copolymer films (1um thick or less) were evaluated and presented a large relative permittivity and greater piezoelectric β-phase without stretching. Further investigations will be used to identify suitable micro-electromechanical systems (MEMs) structures given specific types of low-frequency mechanical excitations (10-100Hz).

scholarly journals Development of Piezoelectric Energy Harvester System through Optimizing Multiple Structural Parameters

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2876
Author(s):  
Hailu Yang ◽  
Ya Wei ◽  
Weidong Zhang ◽  
Yibo Ai ◽  
Zhoujing Ye ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Structural Parameters ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Cross Sectional ◽  
Accelerated Pavement Testing ◽  
Piezoelectric Energy ◽  
Pavement Testing

Road power generation technology is of significance for constructing smart roads. With a high electromechanical conversion rate and high bearing capacity, the stack piezoelectric transducer is one of the most used structures in road energy harvesting to convert mechanical energy into electrical energy. To further improve the energy generation efficiency of this type of piezoelectric energy harvester (PEH), this study theoretically and experimentally investigated the influences of connection mode, number of stack layers, ratio of height to cross-sectional area and number of units on the power generation performance. Two types of PEHs were designed and verified using a laboratory accelerated pavement testing system. The findings of this study can guide the structural optimization of PEHs to meet different purposes of sensing or energy harvesting.

scholarly journals Exploration of 2D Ti3C2 MXene for all solution processed piezoelectric nanogenerator applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rahmat Zaki Auliya ◽  
Poh Choon Ooi ◽  
Rad Sadri ◽  
Noor Azrina Talik ◽  
Zhi Yong Yau ◽  
...  
Keyword(s):  
Mechanical Energy ◽  
Electrical Energy ◽  
Human Motion ◽  
Electrical Performance ◽  
Energy Harvesters ◽  
Β Phase ◽  
Piezoelectric Energy ◽  
Piezoelectric Polymer ◽  
Load Resistor ◽  
Low Dimensional

AbstractA new 2D titanium carbide (Ti3C2), a low dimensional material of the MXene family has attracted remarkable interest in several electronic applications, but its unique structure and novel properties are still less explored in piezoelectric energy harvesters. Herein, a systematic study has been conducted to examine the role of Ti3C2 multilayers when it is incorporated in the piezoelectric polymer host. The 0.03 g/L of Ti3C2 has been identified as the most appropriate concentration to ensure the optimum performance of the fabricated device with a generated output voltage of about 6.0 V. The probable reasons might be due to the uniformity of nanofiller distribution in the polyvinylidene difluoride (PVDF) and the incorporation of Ti3C2 in a polymer matrix is found to enhance the β-phase of PVDF and diminish the undesired α-phase configuration. Low tapping frequency and force were demonstrated to scavenge electrical energy from abundant mechanical energy resources particularly human motion and environmental stimuli. The fabricated device attained a power density of 14 µW.cm−2 at 10.8 MΩ of load resistor which is considerably high among 2D material-based piezoelectric nanogenerators. The device has also shown stable electrical performance for up to 4 weeks and is practically able to store energy in a capacitor and light up a LED. Hence, the Ti3C2-based piezoelectric nanogenerator suggests the potential to realize the energy harvesting application for low-power electronic devices.

A Review of Two Patents Relating to Novel Energy Harvesting Techniques to Provide Electrical Power On-Board Gun-Fired Projectiles

2010 ◽  
Author(s):  
Jahangir Rastegar ◽  
Richard Murray
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Harsh Environment ◽  
Logical Framework ◽  
Power Sources ◽  
Piezoelectric Elements ◽  
Harvesting Techniques

This is a review of two patents relating to electrical power generation on-board gun-fired munitions. The devices harvest mechanical energy from the motion of the projectile (e.g. the axial firing acceleration), and then convert the energy from mechanical to electrical using novel mechanisms and materials such as piezoelectric elements. The devices are particularly important for several reasons. Firstly, the devices are inherently safe because the root source of the electrical energy is the motion of the projectile; therefore no electrical energy can be produced until after the projectile is fired. Second, the devices have a much longer shelf-life than competing electrical power sources such as batteries. Finally, the devices are simple, rugged, and reliable making them ideal for the harsh environment on-board gun-fired projectiles. In addition to presenting the general approach, the logical framework of the patented embodiments is presented, especially with respect to the types of motion used for harvesting and the challenges presented by the varied magnitudes of those motions in different weapon platforms.

Sign in / Sign up

Export Citation Format

Share Document