scholarly journals Exploration of 2D Ti3C2 MXene for all solution processed piezoelectric nanogenerator applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rahmat Zaki Auliya ◽  
Poh Choon Ooi ◽  
Rad Sadri ◽  
Noor Azrina Talik ◽  
Zhi Yong Yau ◽  
...  
Keyword(s):  
Mechanical Energy ◽  
Electrical Energy ◽  
Human Motion ◽  
Electrical Performance ◽  
Energy Harvesters ◽  
Β Phase ◽  
Piezoelectric Energy ◽  
Piezoelectric Polymer ◽  
Load Resistor ◽  
Low Dimensional

AbstractA new 2D titanium carbide (Ti3C2), a low dimensional material of the MXene family has attracted remarkable interest in several electronic applications, but its unique structure and novel properties are still less explored in piezoelectric energy harvesters. Herein, a systematic study has been conducted to examine the role of Ti3C2 multilayers when it is incorporated in the piezoelectric polymer host. The 0.03 g/L of Ti3C2 has been identified as the most appropriate concentration to ensure the optimum performance of the fabricated device with a generated output voltage of about 6.0 V. The probable reasons might be due to the uniformity of nanofiller distribution in the polyvinylidene difluoride (PVDF) and the incorporation of Ti3C2 in a polymer matrix is found to enhance the β-phase of PVDF and diminish the undesired α-phase configuration. Low tapping frequency and force were demonstrated to scavenge electrical energy from abundant mechanical energy resources particularly human motion and environmental stimuli. The fabricated device attained a power density of 14 µW.cm−2 at 10.8 MΩ of load resistor which is considerably high among 2D material-based piezoelectric nanogenerators. The device has also shown stable electrical performance for up to 4 weeks and is practically able to store energy in a capacitor and light up a LED. Hence, the Ti3C2-based piezoelectric nanogenerator suggests the potential to realize the energy harvesting application for low-power electronic devices.

scholarly journals Development and Validation of an Enhanced Coupled-Field Model for PZT Cantilever Bimorph Energy Harvester

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zhengchao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Open Circuit ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

The power source with the limited life span has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means of converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, two previous models in the literatures for predicting the open-circuit and close-circuit voltages of a piezoelectric cantilever bimorph (PCB) energy harvester are first described, that is, the mechanical equivalent spring mass-damper model and the electrical equivalent circuit model. Then, the development of an enhanced coupled field model for the PCB energy harvester based on another previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit and close-circuit voltages of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy-harvesting level of the system.

scholarly journals Numerical Analysis of Signal Response Characteristic of Piezoelectric Energy Harvesters Embedded in Pavement

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2770
Author(s):  
Hailu Yang ◽  
Qian Zhao ◽  
Xueli Guo ◽  
Weidong Zhang ◽  
Pengfei Liu ◽  
...  
Keyword(s):  
Power Generation ◽  
Numerical Study ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Response Characteristic ◽  
Asphalt Pavements ◽  
Horizontal Distance ◽  
Concrete Pavements ◽  
Energy Harvesters ◽  
Piezoelectric Energy

Piezoelectric pavement energy harvesting is a technological approach to transform mechanical energy into electrical energy. When a piezoelectric energy harvester (PEH) is embedded in asphalt pavements or concrete pavements, it is subjected to traffic loads and generates electricity. The wander of the tire load and the positioning of the PEH affect the power generation; however, they were seldom comprehensively investigated until now. In this paper, a numerical study on the influence of embedding depth of the PEH and the horizontal distance between a tire load and the PEH on piezoelectric power generation is presented. The result shows that the relative position between the PEH and the load influences the voltage magnitude, and different modes of stress state change voltage polarity. Two mathematic correlations between the embedding depth, the horizontal distance, and the generated voltage were fitted based on the computational results. This study can be used to estimate the power generation efficiency, and thus offer basic information for further development to improve the practical design of PEHs in an asphalt pavement.

scholarly journals The Effect of Piezoelectric Shape on Energy Harvesting Shoes

2019 ◽  
Vol 8 (12) ◽  
pp. 918-923
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Piezoelectric Effect ◽  
Mechanical Energy ◽  
Piezoelectric Element ◽  
Electrical Energy ◽  
Human Motion ◽  
Piezoelectric Energy ◽  
Piezoelectric Elements ◽  
Bridge Rectifier

Piezoelectric elements are commonly installed in shoe sole to make use of the piezoelectric effect due to the vibration generated by the human motion. Piezoelectric shoe is a great device that can be used to harvest energy and can be improved by adding more piezoelectric elements and providing storage to store the harvested energy. However, not many researchers focus on the analyzation of piezoelectric elements’ shape that may affect the efficiency of energy harvesting. In this paper, piezoelectric energy harvesting shoes are designed with piezoelectric elements installed inside the soles of the shoes, thereby gaining mechanical energy from user while walking and running. The mechanical energy was applied to the piezoelectric elements and converted into electrical energy. Bridge rectifier was used to convert the AC voltage output into DC voltage. The project focused on analyzation of the efficiency between round and square shaped piezoelectric elements. Different shape of the piezoelectric element produced different amount of output voltage. Square shaped piezoelectric tended to produce lesser output voltage than the round piezoelectric element. A round piezoelectric with diameter of 4.5cm produced mean output voltage up to 11.56V and square piezoelectric with size of 4.5cm x 4.5cm produced 6.12V. However, this all depended on how much pressure that was applied onto the piezoelectric elements.

Theoretical and Experimental Analysis of Frequency Up-Conversion Energy Harvesters Under Human-Generated Vibrations

2014 ◽  
Author(s):  
Raul B. Olympio ◽  
John Donahue ◽  
Adam M. Wickenheiser
Keyword(s):  
Power Output ◽  
Low Frequency ◽  
Wide Band ◽  
Electrical Energy ◽  
Human Motion ◽  
Maximum Efficiency ◽  
Vibration Source ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Exciting Frequency

Piezoelectric energy harvesters are devices capable of converting the kinetic energy present in vibration-based motion into electrical energy using piezoelectric transducers. This kind of device has its maximum efficiency when the exciting frequency matches its natural frequency. In the past years, some authors have explored the use of human motion as a vibration source, and harvesting energy in this situation is not trivial because the low-frequency characteristics of the motion are not compatible with small, light-weight transducers, which have relatively high natural frequencies. To overcome this problem, a method known as frequency up-conversion is used; it consists of a nonlinear vibration-based, magnetically excited harvester that exhibits frequency-independent performance, allowing the device to be efficient in a wide band of frequencies. In this work, the power output of a piezoelectric energy harvesting with frequency up-conversion submitted to walking and running vibrations is analyzed. Data are collected using an accelerometer located on the front pocket of each subject and then used in simulations. The model used consists of a cantilever beam with a permanent magnetic tip at the free end; this tip interacts with a magnetized structure that adds a nonlinear interaction to the model. A pure resistance matching the device’s impedance at its fundamental frequency is used to account for the output power. To verify the advantages of using the frequency up-conversion method for vibration-based energy harvesters regarding the power output and frequency band, a comparison with the linear cantilever model is analyzed. Also, in order to confirm the simulation results, a prototype of the device is built and submitted to vibration tests using a horizontally oriented motor-driven cart that recreates the motions recorded by the accelerometer; it is tested with and without the magnetic force in order to experimentally determine the nonlinearity’s effects on the power harvesting performance.

Enhanced Coupled Field Modeling of PZT Cantilever Bimorph Energy Harvester

2011 ◽  
Vol 145 ◽  
pp. 21-26
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zheng Chao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Consumer Electronics ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

As consumer electronics continue to develop in size and scope, the battery power source with the limited life span poses an increasing economic challenge. This growing problem has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy for use of the wireless sensor nodes and the portable electronics. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means for converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, the development of an enhanced coupled field model for the PCB energy harvester based on a previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy harvesting level of the system.

Energy harvesting from quasi-static deformations via bilaterally constrained strips

2018 ◽  
Vol 29 (18) ◽  
pp. 3572-3581
Author(s):  
Suihan Liu ◽  
Ali Imani Azad ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Energy Resource ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Budget ◽  
Piezoelectric Energy ◽  
Static Conditions

Piezoelectric energy harvesting from ambient vibrations is well studied, but harvesting from quasi-static responses is not yet fully explored. The lack of attention is because quasi-static actions are much slower than the resonance frequency of piezoelectric oscillators to achieve optimal outputs; however, they can be a common mechanical energy resource: from large civil structure deformations to biomechanical motions. The recent advances in bio-micro-electro-mechanical systems and wireless sensor technologies are motivating the study of piezoelectric energy harvesting from quasi-static conditions for low-power budget devices. This article presents a new approach of using quasi-static deformations to generate electrical power through an axially compressed bilaterally constrained strip with an attached piezoelectric layer. A theoretical model was developed to predict the strain distribution of the strip’s buckled configuration for calculating the electrical energy generation. Results from an experimental investigation and finite element simulations are in good agreement with the theoretical study. Test results from a prototyped device showed that a peak output power of 1.33 μW/cm2 was generated, which can adequately provide power supply for low-power budget devices. And a parametric study was also conducted to provide design guidance on selecting the dimensions of a device based on the external embedding structure.

Stress Analysis of Smart Beam Energy Harvesters

2016 ◽  
Author(s):  
Nathan S. Hosking ◽  
Zahra Sotoudeh
Keyword(s):  
Smart Materials ◽  
Mechanical Energy ◽  
Strain Analysis ◽  
Electrical Energy ◽  
Structural Dynamic ◽  
Energy Harvesters ◽  
Beam Equations ◽  
Variational Asymptotic ◽  
Strain Components ◽  
Smart Beam

In this paper, we study fully coupled electromagnetic-elastic behaviors present in the structures of smart beams using variational asymptotic beam sections and geometrically exact fully intrinsic beam equations combined in a consistent theory. We present results for smart beams under various oscillatory loads in both the axial and transverse directions and calculate the corresponding deformations. Recovery equations are employed to construct the full 3D stress and strain components in order to complete a full stress / strain analysis. Smart materials change mechanical energy to electrical energy; therefore, changing the structural dynamic behavior of the structure and its stiffness matrix.

Modeling and optimization of a wide-band piezoelectric energy harvester for smart building structures

2020 ◽  
Vol 11 (02) ◽  
pp. 2050009
Author(s):  
Prateek Asthana ◽  
Gargi Khanna
Keyword(s):  
Resonant Frequency ◽  
Energy Harvester ◽  
Proof Mass ◽  
Mechanical Energy ◽  
Wide Band ◽  
Electrical Energy ◽  
Sensor Nodes ◽  
Ambient Vibrations ◽  
Band Energy ◽  
Piezoelectric Energy

Piezoelectric energy harvesting refers to conversion of mechanical energy into usable electrical energy. In the modern connected world, wireless sensor nodes are scattered around the environment. These nodes are powered by batteries. Batteries require regular replacement, hence energy harvesters providing continuous autonomous power are used to power these sensor nodes. This work provides two different fixation modes for the resonant frequency for the two modes. Variation in geometric parameter and their effect on resonant frequency and output power have been analyzed. These harvesters capture a wide-band of ambient vibrations and convert them into usable electrical energy. To capture random ambient vibrations, the harvester used is a wide-band energy harvester based on conventional seesaw mechanism. The proposed structure operates on first two resonant frequencies in comparison to the conventional cantilever system working on first resonant frequency. Resonance frequency, as well as response to a varying input vibration frequency, is carried out, showing better performance of seesaw cantilever design. In this work, modeling of wide-band energy harvester with proof mass is being performed. Position of proof mass plays a key role in determining the resonant frequency of the harvester. Placing the proof mass near or away from fixed end results in increase and decrease in stress on the piezoelectric layer. Hence, to avoid the breaking of cantilever, the position of proof mass has been analyzed.

A Novel Multi-Directional Nonlinear Piezoelectric Energy Harvester Coupled With Nonlinear Conditioning Circuits

2015 ◽  
Author(s):  
Zhengbao Yang ◽  
Jean Zu
Keyword(s):  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Electrical Energy ◽  
Elastic Rods ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
High Power Output ◽  
Transduction Mechanisms ◽  
Self Powered ◽  
Aluminum Plates

Energy harvesting from vibrations has become, in recent years, a recurring target of a quantity of research to achieve self-powered operation of low-power electronic devices. However, most of energy harvesters developed to date, regardless of different transduction mechanisms and various structures, are designed to capture vibration energy from single predetermined direction. To overcome the problem of the unidirectional sensitivity, we proposed a novel multi-directional nonlinear energy harvester using piezoelectric materials. The harvester consists of a flexural center (one PZT plate sandwiched by two bow-shaped aluminum plates) and a pair of elastic rods. Base vibration is amplified and transferred to the flexural center by the elastic rods and then converted to electrical energy via the piezoelectric effect. A prototype was fabricated and experimentally compared with traditional cantilevered piezoelectric energy harvester. Following that, a nonlinear conditioning circuit (self-powered SSHI) was analyzed and adopted to improve the performance. Experimental results shows that the proposed energy harvester has the capability of generating power constantly when the excitation direction is changed in 360. It also exhibits a wide frequency bandwidth and a high power output which is further improved by the nonlinear circuit.

Investigation of Vibration Energy Harvesting Using Two Cantilevers With Random Input

2017 ◽  
Author(s):  
Wei Yang ◽  
Panagiotis Alevras ◽  
Shahrzad Towfighian
Keyword(s):  
Mechanical Energy ◽  
Duffing Oscillator ◽  
Electrical Energy ◽  
Potential Energy Function ◽  
Excitation Level ◽  
Vibration Energy ◽  
Random Input ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Low Performance

There is a growing interest to convert ambient mechanical energy to electrical energy by vibration energy harvesters. Realistic vibrations are random and spread over a large frequency range. Most energy harvesters are linear with narrow frequency bandwidth and show low performance, which led to creation of nonlinear harvesters that have larger bandwidth. This article presents a simulation study of a nonlinear energy harvester that contains two cantilever beams coupled by magnetic force. One of the cantilever beam is covered partially by piezoelectric material, while the other beam is normal to the first one and is used to create a variable potential energy function. The variable double-well potential function enables optimum conversion of the kinetic energy and thus larger output. The system is modeled by coupled Duffing oscillator equations. To represent the ambient vibrations, the response to Gaussian random input signal (generated by Shinozuka formula) is studied using power spectral density. The effects of different parameters on the system are also investigated. The results show that the double cantilever harvester has a threshold distance, where the harvester can perform optimally regardless of the excitation level. This observation is opposite to that of the conventional fixed magnet cantilever system where the optimal distance varies with the excitation level. Results of this study can be used to enhance energy efficiency of vibration energy harvesters.

Sign in / Sign up

Export Citation Format

Share Document