scholarly journals An Intelligent Feedback Controller Design for Energy Efficient Air Conditioning System

2020 ◽  
Vol 2 (3) ◽  
pp. 168-174
Author(s):  
P. Hengjinda ◽  
Dr. Joy Iong Zong Chen
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Controller Design ◽  
Comfort Level ◽  
Sensor Data ◽  
Air Conditioner ◽  
Human Comfort ◽  
Air Conditioning System ◽  
Proposed Model ◽  
Air Conditioning Systems

Air conditioning systems were invented to improve human comfort in a room or hall. An efficient air conditioner systems are always needed to minimize the power consumption. There are several settings with lot of control devices were introduced in the past years to achieve minimal energy consumption rate. Those control systems were minimized the energy consumption to certain limit without considering human comfort. The proposed model is designed to minimize the energy consumption with maximum human comfort. Several sensor modules were introduced in the model to predict human comfort level in a room or hall. The sensor data are taken as feedback to the air conditioning system for attaining maximum human comfort level. The proposed design is verified with energy consumption calculation and change in room temperature measurements.

Effect of Air Conditioning Position on Thermal Comfort in the Floor Air Conditioning System

2014 ◽  
Vol 493 ◽  
pp. 74-79
Author(s):  
Y.A. Sabtalistia ◽  
S.N.N. Ekasiwi ◽  
B. Iskandriawan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Energy Consumption ◽  
Thermal Comfort ◽  
Energy Efficient ◽  
Air Conditioning ◽  
Air Conditioning System ◽  
Air Supply ◽  
Air Conditioning Systems ◽  
Air Diffusion

Energy consumption for air conditioning systems (air conditioning system) increased along with the increasing need for fresh air and comfortable in the room especially apartments. FAC system (Floor Air Conditioning) is growing because it is more energy efficient than CAC (Ceiling Air Conditioning) system. However, the position of the AC supply is on the lower level at the FAC system causes draft discomfort becomes greater as air supply closer to the occupants so that thermal comfort can be reduced. Heat mixture of windows, exterior walls, kitchen, and occupants in the studio apartment affect thermal comfort in the room too.This study aims to determine the position of the AC supply which has the best thermal comfort of FAC system in the studio apartment. It can be done by analyzing ADPI (Air Diffusion Performance Index), the distribution of air temperature, wind speed, RH (Relative Humidity), and DR (Draft Risk) to change the position of the AC supply supported by CFD (Computational Fluid Dynamics) simulation.This result prove that AC position 2 (on wall near the kitchen) is more comfortable than AC position 1 (on the bathroom wall) because AC position 2 away from occupied areas, thereby reducing the occurrence of draught discomfort.

A dynamic model for human thermal comfort for smart building applications

2019 ◽  
Vol 234 (4) ◽  
pp. 472-483
Author(s):  
Ghezlane Halhoul Merabet ◽  
Mohamed Essaaidi ◽  
Driss Benhaddou
Keyword(s):  
Thermal Comfort ◽  
Air Conditioning ◽  
Research Work ◽  
Comfort Level ◽  
Indoor Environments ◽  
Air Conditioning System ◽  
Human Thermal Comfort ◽  
Local Quality ◽  
Set Up ◽  
Air Conditioning Systems

Thermal comfort is closely related to the evaluation of heating, ventilation, and air conditioning systems. It can be seen as the result of the perception of the occupants of a given environment, and it is the product of the interaction of a number of personal and environmental factors. Otherwise, comfort issues still do not play an important role in the daily operation of commercial buildings. However, in the workplace, local quality effects, in addition to the health, the productivity that has a significant impact on the performance of the activities. In this regard, researchers have conducted, for decades, investigations related to thermal comfort and indoor environments, which includes developing models and indices through experimentations to establish standards to evaluate comfort and factors and set-up parameters for heating, ventilation, and air conditioning systems. However, to our best knowledge, most of the research work reported in the literature deals only with parameters that are not dynamically tracked. This work aims to propose a prototype for comfort measuring through a wireless sensor network and then presenting a model for thermal comfort prediction. The developed model can be used to set up a heating, ventilation, and air conditioning system to meet the expected comfort level. In particular, the obtained results show that there is a strong correlation between users’ comfort and variables such as age, gender, and body mass index as a function of height and weight.

Exergy Analysis of Energy Consumption for Central Air Conditioning System

2014 ◽  
Vol 628 ◽  
pp. 332-337
Author(s):  
Xiao Xia Xia ◽  
Nai Jun Zhou ◽  
Zhi Qi Wang
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Exergy Analysis ◽  
Exergy Efficiency ◽  
Dew Point ◽  
Exergy Loss ◽  
Air Conditioning System ◽  
Air Cooler ◽  
Central Air Conditioning ◽  
Air Conditioning Systems

The energy consumption of several central air conditioning systems in summer was researched by the method of exergy analysis. Combined with actual example,the exergy loss of all the equipments and the exergy efficiency of three systems were calculated. The results show that the exergy efficiency of three systems is very low. Relatively speaking, the exergy efficiency of primary return air conditioning system with supplying air in dew point is highest. The equipment of highest exergy loss is air-conditioned room, while the exergy loss of surface air cooler is smallest. Based on this, several improvement measures were proposed to reduce exergy loss and improve exergy efficiency.

Experimental Investigation on a Grid-Connected Photovoltaic Air Conditioning System

2014 ◽  
Vol 672-674 ◽  
pp. 54-60 ◽  
Author(s):  
Ting Xiang Jin ◽  
Xiao Feng Xu
Keyword(s):  
Solar Energy ◽  
Energy Demand ◽  
Air Conditioning ◽  
Experimental Result ◽  
Stable Operation ◽  
Air Conditioner ◽  
Renewable Energy Consumption ◽  
Air Conditioning System ◽  
New Energy ◽  
Air Conditioning Systems

As coal, oil, natural gas and other non-renewable energy consumption and increasing energy demand, the utilization of solar energy as a new energy is greatly enhanced. In this work, a grid connected photovoltaic solar air conditioning system is designed, mainly comprised of solar panel, controller, inverter, room air conditioner and other parts. Air conditioning systems rely mainly on solar photovoltaic power; achieve the effect of energy conservation and environmental protection. The experimental result indicates that the system can achieve stable operation and the utilization of solar energy driving air conditioning system to save electricity. This air conditioning system is compared with the ordinary air conditioning system, SEER can increase 10.6 ~ 29.4%, HSPF can increase 6.25 ~ 18.5%.

scholarly journals Design and Analysis of a Thermoelectric Air-conditioning System

2020 ◽  
pp. 1-11
Author(s):  
A. Anthony Adeyanju ◽  
K. Manohar
Keyword(s):  
Air Conditioning ◽  
Thermoelectric Module ◽  
Cooling Capacity ◽  
Peltier Effect ◽  
Refrigeration Cycle ◽  
Air Conditioner ◽  
Air Conditioning System ◽  
Thermoelectric Air Conditioner ◽  
Air Conditioning Systems ◽  
Dc Current

Thermoelectric devices use the Peltier effect which creates a heat flux between the junctions of two different types of materials. The thermoelectric module also referred to as a heat pump transfers heat from one side to the other when a DC current is applied. This study carried out the theoretical and experimental analysis of a thermoelectric air conditioning system. A prototype thermoelectric air conditioner of 286 W cooling capacity was built and a testing enclosure made from plywood and Styrofoam was also constructed in order to validate the theoretical result with an experimentation. It was discovered that thermoelectric air conditioning took 4 minutes to reach its desired temperature of 22℃ whereas the standard air conditioning system (Refrigeration Cycle) took 20 minutes to cool to a room temperature. Economically it was also discovered that thermoelectric air conditioning system is 50% cheaper than the refrigeration cycle air conditioning systems. The thermoelectric air conditioner has cheaper maintenance and greater estimated life span of 7 years more than the refrigeration air conditioner. This is because the air conditioner that operates on the refrigeration cycle uses a rotating compressor while the thermoelectric air conditioner uses thermometric module.

Development of Heating and Cooling Local Air Conditioning System for Houses

2018 ◽  
Vol 931 ◽  
pp. 920-925
Author(s):  
Zohrab Melikyan ◽  
Naira Egnatosyan ◽  
Siranush Egnatosyan
Keyword(s):  
Air Conditioning ◽  
Point Of View ◽  
Air Conditioner ◽  
Air Conditioning System ◽  
Air Conditioners ◽  
Heating And Cooling ◽  
The Creation ◽  
Air Conditioning Systems

Centralized air conditioning systems are widely used in buildings at present. In these conditioners, the outside air gets required temperature, humidity, purity, and other features, necessary for creating comfort microclimate in inside areas of houses, and by the help of fans and air ducts the processed air moves to all rooms of a building. As a result, the creation and maintenance of comfort conditions in buildings become complicated and expensive activity. From this point of view, it is becoming more expedient to install local air conditioners in each room instead of single central one for the whole building. For this reason new local air conditioner is developed.

scholarly journals Comparison of energy consumption between non-inverter and inverter-type air conditioner in Saudi Arabia

2020 ◽  
Author(s):  
Ahmed Almogbel ◽  
Fahad Alkasmoul ◽  
Zaid Aldawsari ◽  
Jaber Alsulami ◽  
Ahmed Alsuwailem
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Air Conditioning ◽  
High Growth ◽  
Operating Conditions ◽  
Air Conditioner ◽  
Air Conditioners ◽  
Air Conditioning Systems ◽  
Electrical Consumption ◽  
Day By Day

AbstractInterest for air-conditioning systems (ACs) has exponentially expanded worldwide throughout the most recent couple of decades. Countries with booming economies including Saudi Arabia report high growth of sales of room air conditioners. With the expanded (GDP) and warming climates, interest for room air-conditioning systems is required to additionally increment. Meeting the expanded need for electricity energy will be a challenge. Expanded utilization of energy-efficient air conditioners impactsly affects lowering the electricity demand. In an ordinary AC, the blower runs at a fixed speed and is either ON or OFF. In an inverter AC, the compressor is consistently on; however, power drawn relies upon the demand for cooling. The speed of the compressor is adjusted appropriately. In this paper, the energy consumption of non-inverter and an inverter AC of the same capacity was assessed in an average office room, under comparative operating conditions, to find the differences in the energy saving, Carbon Dioxide (CO2) emission, and power consumption of air conditioner. Energy consumption was measured for about 108 days, which is from July 16th to October 31st, 24/7, and compared. The experiment is conducted with the same conditions and same capacity air conditioners (18,000 BTU). Results show that the day-by-day normal vitality utilization, the inverter will save up to 44% of electrical consumption compared to a non-inverter of 3471 kWh/year and 6230 kWh/year respectively. Furthermore, the Total Equivalent Warming Impact (TEWI) analysis shows that inverters can save 49% of CO2 emissions.

Off-Line Robust MPC Algorithm for VAV Air-Conditioning Systems

2013 ◽  
Vol 846-847 ◽  
pp. 293-296
Author(s):  
Min Zhao ◽  
Yan Xia Jiang
Keyword(s):  
Temperature Control ◽  
Air Conditioning ◽  
Control Algorithm ◽  
Controller Design ◽  
Delay Model ◽  
Air Conditioning System ◽  
Variable Air Volume ◽  
Robust Model Predictive Control ◽  
Robust Model ◽  
Air Conditioning Systems

The efficient temperature control of variable air volume (VAV) air-conditioning system can greatly reduce the energy consumption. In order to due with system constraints and uncertainties, and guarantee the closed-loop stability, an off-line min-max robust model predictive control algorithm is presented for the temperature control of a VAV system. As the first-order-plus-time-delay model of system is described by a polyhedral described uncertain model, the off-line ellipsoidal invariant set based robust MPC algorithm is employed for the controller design. Simulation results show efficiency of the proposed control algorithm implemented in the temperature control of a VAV system, which can enhance robustness, and satisfy the constraints.

Comparison study of air mixing modes in liquid desiccant based all-air air conditioning systems

2011 ◽  
Vol 33 (4) ◽  
pp. 423-435 ◽  
Author(s):  
Fu Xiao ◽  
XiaoFeng Niu
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Coefficient Of Performance ◽  
Liquid Desiccant ◽  
Total Energy Consumption ◽  
Air Conditioning System ◽  
Operation Conditions ◽  
Air System ◽  
Air Mixing ◽  
Air Conditioning Systems

Liquid desiccant is an energy-saving, environmentally friendly and healthy means of air dehumidification. A liquid desiccant-based all-air air conditioning system is studied by simulation. Two different modes of air mixing between the return air and the fresh air are compared, that is mixing before and mixing after the liquid desiccant dehumidifier, respectively. System performance and total energy consumption of the two modes under different operation conditions are obtained. The results show that mixing air after dehumidification consumes less energy than mixing air before dehumidification. Coefficient of performance (COP) of the all-air system with air mixing after dehumidification is higher. The differences of COP and energy consumption between the two air mixing modes increase when the outdoor air temperature and relative humidity increase. Practical application: Liquid desiccant based all-air system is quite suitable for museums, libraries and computer centres where water is not allowed to enter the space for property safety and strict thermal-hygrometric control is necessary. The results of this paper provide guidelines on the selection of air mixing modes in liquid desiccant-based all-air systems, considering energy consumption and system COP.

Energy Conservation Analysis for Air Conditioning System in Rail Transit Stations

2014 ◽  
Vol 494-495 ◽  
pp. 1674-1677
Author(s):  
Bing Xu ◽  
Fang Hong Yuan ◽  
Bao Guo Zheng ◽  
Zhong Jin Shi ◽  
Yi Huan Hu
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Control Strategy ◽  
Air Conditioning ◽  
Rail Transit ◽  
Air Conditioning System ◽  
Conservation Analysis ◽  
Air Conditioning Systems ◽  
Reducing Energy

This article discusses energy conservation for air conditioning systems in rail transit stations. At first, the paper analyzes the energy consumption condition in the air conditioning systems in rail transit stations. Then, it discusses application of appropriate control strategy for reducing energy consumption. In the end, the paper calculates effiency and amount of the energy saving based on the control strategy.

Sign in / Sign up

Export Citation Format

Share Document