OPTIMIZE THE ORGANIZATION OF THE ACCOUNTING SERVICE AND OTHER SERVICE FUNCTIONS USING THE THEORY OF MANAGEMENT OF MASS SERVICE SYSTEMS

2020 ◽  
Vol 1 (12) ◽  
pp. 19-24
Author(s):  
I. A. SLOBODNYAK ◽  
◽  
P. V. ANTIPINA ◽  

The article is devoted to considering the use of modern mathematical methods for the purpose of analyzing the effectiveness of organizing of various services of the organization. With the example of the accounting service it is shown how the basic performance of the service can be defined using the position of mass service theory. Proposes an interpretation of all the major variables in the model from an economic point of view. The model is universal and can be used to assess the operation of any service that meets the parameters of the mass service system.

2020 ◽  
Vol 14 (1) ◽  
pp. 46-49
Author(s):  
M. T. Toshboltaev ◽  
Z. A. Seytimbetova

The authors showed that the multichannel system state graph of modern tractors, combines and agricultural machinery in Uzbekistan, by the nature of its functioning, was a kind of mass service system. They confirmed that this circumstance was not taken into account when studying the existing system of corporate technical service. They pointed out the relevance of determining the influence of the branded technical service system parameters on its condition using the methods of the mass service theory. (Research purpose) To evaluate the state parameters of a proprietary technical service multichannel system according to the results of the timing of combine harvesters maintenance. (Materials and methods) The authors studied the multi-channel system state graph of a proprietary technical service without a queue. The system included 109 Case-2166 combine harvesters and 7 car-mobile workshops. They used the methods of mass service theory. (Results and discussion) The authors established a linear relationship between the number of occupied car-mobile workshops and the average value of the service time at a constant intensity of requirements. It was revealed that it took 3.33 hours to fix one malfunction of one combine, that is, one workshop would be occupied. If 3.24 demands were received in the service center in one hour, then all 7 auto-moving workshops would be occupied. (Conclusions) The authors revealed that for a single-channel proprietary technical service system the average value of the time for eliminating one malfunction of one combine should not exceed 3.33 hours. They calculated the parameters at which all channels (7 workshops) will be occupied in the 7-channel system of corporate technical service: 3.24 requirements arose in one hour, on average, each workshop took 2.16 hours to fix one malfunction.


2020 ◽  
Vol 3 (2) ◽  
pp. 133-141
Author(s):  
Iroh Rahmawati

From an economic point of view, taxes are state revenues used to direct people's lives towards prosperity. Tax as a driving force for people's economic life. By applying the e-filling method in the PPN & PPn BM tax service system, it is expected that state revenue can increase. The purpose of this study was to analyze the comparison of acceptance of PPN & PPn BM before and after the e-filling method was applied. Data analysis technique used paired test sample T-test with the help of SPSS. To find out whether or not the hypothesis was accepted, a comparison of tcount (-2,392) and t-table (2,201) was used. Based on calculations it is known that there was  no significant difference in the amount of PPN & PPn BM receipts before and after the e-filling method was applied.


2018 ◽  
Vol 19 (6) ◽  
pp. 906-910
Author(s):  
Andrzej Lewiński ◽  
Marta Żurek-Mortka

Paper discussed the modeling of customs processes for truck vehicles using the Markov processes and mass service theory (queue theory), showing the operation of the notification handling system as a system dependent on random events. The system is characterized as a system with Poisson input stream, exponential service time and many service stations. The results are presented in the form of graphs based on real data received from the customs office


2003 ◽  
Vol 42 (2) ◽  
pp. 170-172
Author(s):  
Mir Annice Mahmood

To implement any successful policy, research about the subject-matter is essential. Lack of knowledge would result in failure and, from an economic point of view, it would lead to a waste of scarce resources. The book under review is essentially a manual which highlights the use of research for development. The book is divided into two parts. Part One informs the reader about concepts and some theory, and Part Two deals with the issue of undertaking research for development. Both parts have 11 chapters each. Chapter 1 asks the basic question: Is research important in development work? The answer is that it is. Research has many dimensions: from the basic asking of questions to the more sophisticated broad-based analysis of policy issues. The chapter, in short, stresses the usefulness of research which development workers ignore at their own peril.


2014 ◽  
Vol 30 (2) ◽  
pp. 113-126 ◽  
Author(s):  
Dominic Detzen ◽  
Tobias Stork genannt Wersborg ◽  
Henning Zülch

ABSTRACT This case originates from a real-life business situation and illustrates the application of impairment tests in accordance with IFRS and U.S. GAAP. In the first part of the case study, students examine conceptual questions of impairment tests under IFRS and U.S. GAAP with respect to applicable accounting standards, definitions, value concepts, and frequency of application. In addition, the case encourages students to discuss the impairment regime from an economic point of view. The second part of the instructional resource continues to provide instructors with the flexibility of applying U.S. GAAP and/or IFRS when students are asked to test a long-lived asset for impairment and, if necessary, allocate any potential impairment. This latter part demonstrates that impairment tests require professional judgment that students are to exercise in the case.


Author(s):  
Ramesh Raghavan

This chapter presents an overview of how D&I research can be evaluated from an economic point of view. Dissemination and implementation imposes costs upon knowledge purveyors, provider organizations, public health organizations, and payers (including governments). However, whether these added costs will result in improved service delivery and, perhaps more importantly, client outcomes and improvements in population health remain as open questions. If emerging studies reveal that defined implementation strategies are more cost effective than “usual” implementation, then policymakers and service providers will need to resource these added costs of implementation in order to assure the success and sustainability of high-quality health services over the long term.


Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 565
Author(s):  
Nikolaj Kaae Kirk ◽  
Clara Navarrete ◽  
Jakob Ellegaard Juhl ◽  
José Luis Martínez ◽  
Alessandra Procentese

To make biofuel production feasible from an economic point of view, several studies have investigated the main associated bottlenecks of the whole production process through approaches such as the “cradle to grave” approach or the Life Cycle Assessment (LCA) analysis, being the main constrains the feedstock collection and transport. Whilst several feedstocks are interesting because of their high sugar content, very few of them are available all year around and moreover do not require high transportation’ costs. This work aims to investigate if the “zero miles” concept could bring advantages to biofuel production by decreasing all the associated transport costs on a locally established production platform. In particular, a specific case study applied to the Technical University of Denmark (DTU) campus is used as example to investigate the advantages and feasibility of using the spent coffee grounds generated at the main cafeteria for the production of bioethanol on site, which can be subsequently used to (partially) cover the campus’ energy demands.


Metabolites ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 113
Author(s):  
Julia Koblitz ◽  
Sabine Will ◽  
S. Riemer ◽  
Thomas Ulas ◽  
Meina Neumann-Schaal ◽  
...  

Genome-scale metabolic models are of high interest in a number of different research fields. Flux balance analysis (FBA) and other mathematical methods allow the prediction of the steady-state behavior of metabolic networks under different environmental conditions. However, many existing applications for flux optimizations do not provide a metabolite-centric view on fluxes. Metano is a standalone, open-source toolbox for the analysis and refinement of metabolic models. While flux distributions in metabolic networks are predominantly analyzed from a reaction-centric point of view, the Metano methods of split-ratio analysis and metabolite flux minimization also allow a metabolite-centric view on flux distributions. In addition, we present MMTB (Metano Modeling Toolbox), a web-based toolbox for metabolic modeling including a user-friendly interface to Metano methods. MMTB assists during bottom-up construction of metabolic models by integrating reaction and enzymatic annotation data from different databases. Furthermore, MMTB is especially designed for non-experienced users by providing an intuitive interface to the most commonly used modeling methods and offering novel visualizations. Additionally, MMTB allows users to upload their models, which can in turn be explored and analyzed by the community. We introduce MMTB by two use cases, involving a published model of Corynebacterium glutamicum and a newly created model of Phaeobacter inhibens.


Sign in / Sign up

Export Citation Format

Share Document